aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)AuthorFilesLines
2024-06-27net: mana: Fix possible double free in error handling pathMa Ke1-0/+2
When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function adev_release calls kfree(madev). We shouldn't call kfree(madev) again in the error handling path. Set 'madev' to NULL. Fixes: a69839d4327d ("net: mana: Add support for auxiliary device") Signed-off-by: Ma Ke <make24@iscas.ac.cn> Link: https://patch.msgid.link/20240625130314.2661257-1-make24@iscas.ac.cn Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-26net: usb: qmi_wwan: add Telit FN912 compositionsDaniele Palmas1-0/+2
Add the following Telit FN912 compositions: 0x3000: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3000 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x3001: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=07 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=3001 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN912 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://patch.msgid.link/20240625102236.69539-1-dnlplm@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25ionic: use dev_consume_skb_any outside of napiShannon Nelson3-13/+21
If we're not in a NAPI softirq context, we need to be careful about how we call napi_consume_skb(), specifically we need to call it with budget==0 to signal to it that we're not in a safe context. This was found while running some configuration stress testing of traffic and a change queue config loop running, and this curious note popped out: [ 4371.402645] BUG: using smp_processor_id() in preemptible [00000000] code: ethtool/20545 [ 4371.402897] caller is napi_skb_cache_put+0x16/0x80 [ 4371.403120] CPU: 25 PID: 20545 Comm: ethtool Kdump: loaded Tainted: G OE 6.10.0-rc3-netnext+ #8 [ 4371.403302] Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 01/23/2021 [ 4371.403460] Call Trace: [ 4371.403613] <TASK> [ 4371.403758] dump_stack_lvl+0x4f/0x70 [ 4371.403904] check_preemption_disabled+0xc1/0xe0 [ 4371.404051] napi_skb_cache_put+0x16/0x80 [ 4371.404199] ionic_tx_clean+0x18a/0x240 [ionic] [ 4371.404354] ionic_tx_cq_service+0xc4/0x200 [ionic] [ 4371.404505] ionic_tx_flush+0x15/0x70 [ionic] [ 4371.404653] ? ionic_lif_qcq_deinit.isra.23+0x5b/0x70 [ionic] [ 4371.404805] ionic_txrx_deinit+0x71/0x190 [ionic] [ 4371.404956] ionic_reconfigure_queues+0x5f5/0xff0 [ionic] [ 4371.405111] ionic_set_ringparam+0x2e8/0x3e0 [ionic] [ 4371.405265] ethnl_set_rings+0x1f1/0x300 [ 4371.405418] ethnl_default_set_doit+0xbb/0x160 [ 4371.405571] genl_family_rcv_msg_doit+0xff/0x130 [...] I found that ionic_tx_clean() calls napi_consume_skb() which calls napi_skb_cache_put(), but before that last call is the note /* Zero budget indicate non-NAPI context called us, like netpoll */ and DEBUG_NET_WARN_ON_ONCE(!in_softirq()); Those are pretty big hints that we're doing it wrong. We can pass a context hint down through the calls to let ionic_tx_clean() know what we're doing so it can call napi_consume_skb() correctly. Fixes: 386e69865311 ("ionic: Make use napi_consume_skb") Signed-off-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20240624175015.4520-1-shannon.nelson@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-25net: dsa: microchip: fix wrong register write when masking interruptTristram Ha1-1/+1
The switch global port interrupt mask, REG_SW_PORT_INT_MASK__4, is defined as 0x001C in ksz9477_reg.h. The designers used 32-bit value in anticipation for increase of port count in future product but currently the maximum port count is 7 and the effective value is 0x7F in register 0x001F. Each port has its own interrupt mask and is defined as 0x#01F. It uses only 4 bits for different interrupts. The developer who implemented the current interrupt mechanism in the switch driver noticed there are similarities between the mechanism to mask port interrupts in global interrupt and individual interrupts in each port and so used the same code to handle these interrupts. He updated the code to use the new macro REG_SW_PORT_INT_MASK__1 which is defined as 0x1F in ksz_common.h but he forgot to update the 32-bit write to 8-bit as now the mask registers are 0x1F and 0x#01F. In addition all KSZ switches other than the KSZ9897/KSZ9893 and LAN937X families use only 8-bit access and so this common code will eventually be changed to accommodate them. Fixes: e1add7dd6183 ("net: dsa: microchip: use common irq routines for girq and pirq") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Link: https://lore.kernel.org/r/1719009262-2948-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-25ibmvnic: Add tx check to prevent skb leakNick Child1-0/+12
Below is a summary of how the driver stores a reference to an skb during transmit: tx_buff[free_map[consumer_index]]->skb = new_skb; free_map[consumer_index] = IBMVNIC_INVALID_MAP; consumer_index ++; Where variable data looks like this: free_map == [4, IBMVNIC_INVALID_MAP, IBMVNIC_INVALID_MAP, 0, 3] consumer_index^ tx_buff == [skb=null, skb=<ptr>, skb=<ptr>, skb=null, skb=null] The driver has checks to ensure that free_map[consumer_index] pointed to a valid index but there was no check to ensure that this index pointed to an unused/null skb address. So, if, by some chance, our free_map and tx_buff lists become out of sync then we were previously risking an skb memory leak. This could then cause tcp congestion control to stop sending packets, eventually leading to ETIMEDOUT. Therefore, add a conditional to ensure that the skb address is null. If not then warn the user (because this is still a bug that should be patched) and free the old pointer to prevent memleak/tcp problems. Signed-off-by: Nick Child <nnac123@linux.ibm.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-24net: usb: ax88179_178a: improve link status logsJose Ignacio Tornos Martinez1-1/+5
Avoid spurious link status logs that may ultimately be wrong; for example, if the link is set to down with the cable plugged, then the cable is unplugged and after this the link is set to up, the last new log that is appearing is incorrectly telling that the link is up. In order to avoid errors, show link status logs after link_reset processing, and in order to avoid spurious as much as possible, only show the link loss when some link status change is detected. cc: stable@vger.kernel.org Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23octeontx2-pf: Fix coverity and klockwork issues in octeon PF driverRatheesh Kannoth4-35/+35
Fix unintended sign extension and klockwork issues. These are not real issue but for sanity checks. Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Signed-off-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23ice: Rebuild TC queues on VSI queue reconfigurationJan Sokolowski1-1/+9
TC queues needs to be correctly updated when the number of queues on a VSI is reconfigured, so netdev's queue and TC settings will be dynamically adjusted and could accurately represent the underlying hardware state after changes to the VSI queue counts. Fixes: 0754d65bd4be ("ice: Add infrastructure for mqprio support via ndo_setup_tc") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23net: dsa: microchip: monitor potential faults in half-duplex modeEnguerrand de Ribaucourt5-2/+73
The errata DS80000754 recommends monitoring potential faults in half-duplex mode for the KSZ9477 family. half-duplex is not very common so I just added a critical message when the fault conditions are detected. The switch can be expected to be unable to communicate anymore in these states and a software reset of the switch would be required which I did not implement. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23net: dsa: microchip: use collision based back pressure modeEnguerrand de Ribaucourt2-0/+5
Errata DS80000758 states that carrier sense back pressure mode can cause link down issues in 100BASE-TX half duplex mode. The datasheet also recommends to always use the collision based back pressure mode. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Woojung Huh <Woojung.huh@microchip.com> Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-23net: phy: micrel: add Microchip KSZ 9477 to the device tableEnguerrand de Ribaucourt1-0/+1
PHY_ID_KSZ9477 was supported but not added to the device table passed to MODULE_DEVICE_TABLE. Fixes: fc3973a1fa09 ("phy: micrel: add Microchip KSZ 9477 Switch PHY support") Signed-off-by: Enguerrand de Ribaucourt <enguerrand.de-ribaucourt@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-22ibmvnic: Free any outstanding tx skbs during scrq resetNick Child1-0/+6
There are 2 types of outstanding tx skb's: Type 1: Packets that are sitting in the drivers ind_buff that are waiting to be batch sent to the NIC. During a device reset, these are freed with a call to ibmvnic_tx_scrq_clean_buffer() Type 2: Packets that have been sent to the NIC and are awaiting a TX completion IRQ. These are free'd during a reset with a call to clean_tx_pools() During any reset which requires us to free the tx irq, ensure that the Type 2 skb references are freed. Since the irq is released, it is impossible for the NIC to inform of any completions. Furthermore, later in the reset process is a call to init_tx_pools() which marks every entry in the tx pool as free (ie not outstanding). So if the driver is to make a call to init_tx_pools(), it must first be sure that the tx pool is empty of skb references. This issue was discovered by observing the following in the logs during EEH testing: TX free map points to untracked skb (tso_pool 0 idx=4) TX free map points to untracked skb (tso_pool 0 idx=5) TX free map points to untracked skb (tso_pool 1 idx=36) Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") Signed-off-by: Nick Child <nnac123@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21Merge tag 'linux-can-fixes-for-6.10-20240621' of ↵Jakub Kicinski4-10/+66
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2024-06-21 The first patch is by Oleksij Rempel, it enhances the error handling for tightly received RTS message in the j1939 protocol. Shigeru Yoshida's patch fixes a kernel information leak in j1939_send_one() in the j1939 protocol. Followed by a patch by Oleksij Rempel for the j1939 protocol, to properly recover from a CAN bus error during BAM transmission. A patch by Chen Ni properly propagates errors in the kvaser_usb driver. The last patch is by Vitor Soares, that fixes an infinite loop in the mcp251xfd driver is SPI async sending fails during xmit. * tag 'linux-can-fixes-for-6.10-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: mcp251xfd: fix infinite loop when xmit fails can: kvaser_usb: fix return value for hif_usb_send_regout net: can: j1939: recover socket queue on CAN bus error during BAM transmission net: can: j1939: Initialize unused data in j1939_send_one() net: can: j1939: enhanced error handling for tightly received RTS messages in xtp_rx_rts_session_new ==================== Link: https://patch.msgid.link/20240621121739.434355-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-21vxlan: Pull inner IP header in vxlan_xmit_one().Guillaume Nault1-1/+8
Ensure the inner IP header is part of the skb's linear data before setting old_iph. Otherwise, on a non-linear skb, old_iph could point outside of the packet data. Unlike classical VXLAN, which always encapsulates Ethernet packets, VXLAN-GPE can transport IP packets directly. In that case, we need to look at skb->protocol to figure out if an Ethernet header is present. Fixes: d342894c5d2f ("vxlan: virtual extensible lan") Signed-off-by: Guillaume Nault <gnault@redhat.com> Link: https://patch.msgid.link/2aa75f6fa62ac9dbe4f16ad5ba75dd04a51d4b99.1718804000.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-21mlxsw: spectrum_buffers: Fix memory corruptions on Spectrum-4 systemsIdo Schimmel1-6/+14
The following two shared buffer operations make use of the Shared Buffer Status Register (SBSR): # devlink sb occupancy snapshot pci/0000:01:00.0 # devlink sb occupancy clearmax pci/0000:01:00.0 The register has two masks of 256 bits to denote on which ingress / egress ports the register should operate on. Spectrum-4 has more than 256 ports, so the register was extended by cited commit with a new 'port_page' field. However, when filling the register's payload, the driver specifies the ports as absolute numbers and not relative to the first port of the port page, resulting in memory corruptions [1]. Fix by specifying the ports relative to the first port of the port page. [1] BUG: KASAN: slab-use-after-free in mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 Read of size 1 at addr ffff8881068cb00f by task devlink/1566 [...] Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xce/0x670 kasan_report+0xd7/0x110 mlxsw_sp_sb_occ_snapshot+0xb6d/0xbc0 mlxsw_devlink_sb_occ_snapshot+0x75/0xb0 devlink_nl_sb_occ_snapshot_doit+0x1f9/0x2a0 genl_family_rcv_msg_doit+0x20c/0x300 genl_rcv_msg+0x567/0x800 netlink_rcv_skb+0x170/0x450 genl_rcv+0x2d/0x40 netlink_unicast+0x547/0x830 netlink_sendmsg+0x8d4/0xdb0 __sys_sendto+0x49b/0x510 __x64_sys_sendto+0xe5/0x1c0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f [...] Allocated by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 copy_verifier_state+0xbc2/0xfb0 do_check_common+0x2c51/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 poison_slab_object+0x109/0x170 __kasan_slab_free+0x14/0x30 kfree+0xca/0x2b0 free_verifier_state+0xce/0x270 do_check_common+0x4828/0xc7e0 bpf_check+0x5107/0x9960 bpf_prog_load+0xf0e/0x2690 __sys_bpf+0x1a61/0x49d0 __x64_sys_bpf+0x7d/0xc0 do_syscall_64+0xc1/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: f8538aec88b4 ("mlxsw: Add support for more than 256 ports in SBSR register") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21mlxsw: pci: Fix driver initialization with Spectrum-4Ido Schimmel2-3/+17
Cited commit added support for a new reset flow ("all reset") which is deeper than the existing reset flow ("software reset") and allows the device's PCI firmware to be upgraded. In the new flow the driver first tells the firmware that "all reset" is required by issuing a new reset command (i.e., MRSR.command=6) and then triggers the reset by having the PCI core issue a secondary bus reset (SBR). However, due to a race condition in the device's firmware the device is not always able to recover from this reset, resulting in initialization failures [1]. New firmware versions include a fix for the bug and advertise it using a new capability bit in the Management Capabilities Mask (MCAM) register. Avoid initialization failures by reading the new capability bit and triggering the new reset flow only if the bit is set. If the bit is not set, trigger a normal PCI hot reset by skipping the call to the Management Reset and Shutdown Register (MRSR). Normal PCI hot reset is weaker than "all reset", but it results in a fully operational driver and allows users to flash a new firmware, if they want to. [1] mlxsw_spectrum4 0000:01:00.0: not ready 1023ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 2047ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 4095ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 8191ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 16383ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 32767ms after bus reset; waiting mlxsw_spectrum4 0000:01:00.0: not ready 65535ms after bus reset; giving up mlxsw_spectrum4 0000:01:00.0: PCI function reset failed with -25 mlxsw_spectrum4 0000:01:00.0: cannot register bus device mlxsw_spectrum4: probe of 0000:01:00.0 failed with error -25 Fixes: f257c73e5356 ("mlxsw: pci: Add support for new reset flow") Reported-by: Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Maksym Yaremchuk <maksymy@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21ionic: fix kernel panic due to multi-buffer handlingTaehee Yoo1-9/+18
Currently, the ionic_run_xdp() doesn't handle multi-buffer packets properly for XDP_TX and XDP_REDIRECT. When a jumbo frame is received, the ionic_run_xdp() first makes xdp frame with all necessary pages in the rx descriptor. And if the action is either XDP_TX or XDP_REDIRECT, it should unmap dma-mapping and reset page pointer to NULL for all pages, not only the first page. But it doesn't for SG pages. So, SG pages unexpectedly will be reused. It eventually causes kernel panic. Oops: general protection fault, probably for non-canonical address 0x504f4e4dbebc64ff: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.10.0-rc3+ #25 RIP: 0010:xdp_return_frame+0x42/0x90 Code: 01 75 12 5b 4c 89 e6 5d 31 c9 41 5c 31 d2 41 5d e9 73 fd ff ff 44 8b 6b 20 0f b7 43 0a 49 81 ed 68 01 00 00 49 29 c5 49 01 fd <41> 80 7d0 RSP: 0018:ffff99d00122ce08 EFLAGS: 00010202 RAX: 0000000000005453 RBX: ffff8d325f904000 RCX: 0000000000000001 RDX: 00000000670e1000 RSI: 000000011f90d000 RDI: 504f4e4d4c4b4a49 RBP: ffff99d003907740 R08: 0000000000000000 R09: 0000000000000000 R10: 000000011f90d000 R11: 0000000000000000 R12: ffff8d325f904010 R13: 504f4e4dbebc64fd R14: ffff8d3242b070c8 R15: ffff99d0039077c0 FS: 0000000000000000(0000) GS:ffff8d399f780000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f41f6c85e38 CR3: 000000037ac30000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> ? die_addr+0x33/0x90 ? exc_general_protection+0x251/0x2f0 ? asm_exc_general_protection+0x22/0x30 ? xdp_return_frame+0x42/0x90 ionic_tx_clean+0x211/0x280 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_tx_cq_service+0xd3/0x210 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] ionic_txrx_napi+0x41/0x1b0 [ionic 15881354510e6a9c655c59c54812b319ed2cd015] __napi_poll.constprop.0+0x29/0x1b0 net_rx_action+0x2c4/0x350 handle_softirqs+0xf4/0x320 irq_exit_rcu+0x78/0xa0 common_interrupt+0x77/0x90 Fixes: 5377805dc1c0 ("ionic: implement xdp frags support") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21net: pse-pd: Kconfig: Fix missing firmware loader config selectKory Maincent1-0/+1
Selecting FW_UPLOAD is not sufficient as it allows the firmware loader API to be built as a module alongside the pd692x0 driver built as builtin. Add select FW_LOADER to fix this issue. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202406200632.hSChnX0g-lkp@intel.com/ Fixes: 9a9938451890 ("net: pse-pd: Add PD692x0 PSE controller driver") Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21bonding: fix incorrect software timestamping reportHangbin Liu1-0/+3
The __ethtool_get_ts_info function returns directly if the device has a get_ts_info() method. For bonding with an active slave, this works correctly as we simply return the real device's timestamping information. However, when there is no active slave, we only check the slave's TX software timestamp information. We still need to set the phc index and RX timestamp information manually. Otherwise, the result will be look like: Time stamping parameters for bond0: Capabilities: software-transmit PTP Hardware Clock: 0 Hardware Transmit Timestamp Modes: none Hardware Receive Filter Modes: none This issue does not affect VLAN or MACVLAN devices, as they only have one downlink and can directly use the downlink's timestamping information. Fixes: b8768dc40777 ("net: ethtool: Refactor identical get_ts_info implementations.") Reported-by: Liang Li <liali@redhat.com> Closes: https://issues.redhat.com/browse/RHEL-42409 Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Kory Maincent <kory.maincent@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21net: mvpp2: fill-in dev_port attributeAryan Srivastava1-0/+1
Fill this in so user-space can identify multiple ports on the same CP unit. Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-21can: mcp251xfd: fix infinite loop when xmit failsVitor Soares3-9/+65
When the mcp251xfd_start_xmit() function fails, the driver stops processing messages, and the interrupt routine does not return, running indefinitely even after killing the running application. Error messages: [ 441.298819] mcp251xfd spi2.0 can0: ERROR in mcp251xfd_start_xmit: -16 [ 441.306498] mcp251xfd spi2.0 can0: Transmit Event FIFO buffer not empty. (seq=0x000017c7, tef_tail=0x000017cf, tef_head=0x000017d0, tx_head=0x000017d3). ... and repeat forever. The issue can be triggered when multiple devices share the same SPI interface. And there is concurrent access to the bus. The problem occurs because tx_ring->head increments even if mcp251xfd_start_xmit() fails. Consequently, the driver skips one TX package while still expecting a response in mcp251xfd_handle_tefif_one(). Resolve the issue by starting a workqueue to write the tx obj synchronously if err = -EBUSY. In case of another error, decrement tx_ring->head, remove skb from the echo stack, and drop the message. Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN") Cc: stable@vger.kernel.org Signed-off-by: Vitor Soares <vitor.soares@toradex.com> Link: https://lore.kernel.org/all/20240517134355.770777-1-ivitro@gmail.com [mkl: use more imperative wording in patch description] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-21can: kvaser_usb: fix return value for hif_usb_send_regoutChen Ni1-1/+1
As the potential failure of usb_submit_urb(), it should be better to return the err variable to catch the error. Signed-off-by: Chen Ni <nichen@iscas.ac.cn> Link: https://lore.kernel.org/all/20240521041020.1519416-1-nichen@iscas.ac.cn Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-06-20net: dsa: microchip: fix initial port flush problemTristram Ha1-4/+2
The very first flush in any port will flush all learned addresses in all ports. This can be observed by unplugging the cable from one port while additional ports are connected and dumping the fdb entries. This problem is caused by the initially wrong value programmed to the REG_SW_LUE_CTRL_1 register. Setting SW_FLUSH_STP_TABLE and SW_FLUSH_MSTP_TABLE bits does not have an immediate effect. It is when ksz9477_flush_dyn_mac_table() is called then the SW_FLUSH_STP_TABLE bit takes effect and flushes all learned entries. After that call both bits are reset and so the next port flush will not cause such problem again. Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Link: https://patch.msgid.link/1718756202-2731-1-git-send-email-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-20net: usb: rtl8150 fix unintiatilzed variables in rtl8150_get_link_ksettingsOliver Neukum1-1/+2
This functions retrieves values by passing a pointer. As the function that retrieves them can fail before touching the pointers, the variables must be initialized. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+5186630949e3c55f0799@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20240619132816.11526-1-oneukum@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-20bnxt_en: Restore PTP tx_avail count in case of skb_pad() errorPavan Chebbi1-3/+2
The current code only restores PTP tx_avail count when we get DMA mapping errors. Fix it so that the PTP tx_avail count will be restored for both DMA mapping errors and skb_pad() errors. Otherwise PTP TX timestamp will not be available after a PTP packet hits the skb_pad() error. Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240618215313.29631-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-20bnxt_en: Set TSO max segs on devices with limitsMichael Chan2-0/+4
Firmware will now advertise a non-zero TSO max segments if the device has a limit. 0 means no limit. The latest 5760X chip (early revs) has a limit of 2047 that cannot be exceeded. If exceeded, the chip will send out just a small number of segments. Call netif_set_tso_max_segs() if the device has a limit. Fixes: 2012a6abc876 ("bnxt_en: Add 5760X (P7) PCI IDs") Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240618215313.29631-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-20bnxt_en: Update firmware interface to 1.10.3.44Michael Chan1-133/+178
The relevant change is the max_tso_segs value returned by firmware in the HWRM_FUNC_QCAPS response. This value will be used in the next patch to cap the TSO segments. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240618215313.29631-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-20net: stmmac: Assign configured channel value to EXTTS eventOleksij Rempel1-1/+5
Assign the configured channel value to the EXTTS event in the timestamp interrupt handler. Without assigning the correct channel, applications like ts2phc will refuse to accept the event, resulting in errors such as: ... ts2phc[656.834]: config item end1.ts2phc.pin_index is 0 ts2phc[656.834]: config item end1.ts2phc.channel is 3 ts2phc[656.834]: config item end1.ts2phc.extts_polarity is 2 ts2phc[656.834]: config item end1.ts2phc.extts_correction is 0 ... ts2phc[656.862]: extts on unexpected channel ts2phc[658.141]: extts on unexpected channel ts2phc[659.140]: extts on unexpected channel Fixes: f4da56529da60 ("net: stmmac: Add support for external trigger timestamping") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Link: https://lore.kernel.org/r/20240618073821.619751-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-19ice: Fix VSI list rule with ICE_SW_LKUP_LAST typeMarcin Szycik1-2/+4
Adding/updating VSI list rule, as well as allocating/freeing VSI list resource are called several times with type ICE_SW_LKUP_LAST, which fails because ice_update_vsi_list_rule() and ice_aq_alloc_free_vsi_list() consider it invalid. Allow calling these functions with ICE_SW_LKUP_LAST. This fixes at least one issue in switchdev mode, where the same rule with different action cannot be added, e.g.: tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \ dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF1_PR tc filter add dev $PF1 ingress protocol arp prio 0 flower skip_sw \ dst_mac ff:ff:ff:ff:ff:ff action mirred egress redirect dev $VF2_PR Fixes: 0f94570d0cae ("ice: allow adding advanced rules") Suggested-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240618210206.981885-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-19octeontx2-pf: Fix linking objects into multiple modulesGeetha sowjanya3-2/+10
This patch fixes the below build warning messages that are caused due to linking same files to multiple modules by exporting the required symbols. "scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile: otx2_devlink.o is added to multiple modules: rvu_nicpf rvu_nicvf scripts/Makefile.build:244: drivers/net/ethernet/marvell/octeontx2/nic/Makefile: otx2_dcbnl.o is added to multiple modules: rvu_nicpf rvu_nicvf" Fixes: 8e67558177f8 ("octeontx2-pf: PFC config support with DCBx"). Signed-off-by: Geetha sowjanya <gakula@marvell.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-19octeontx2-pf: Add error handling to VLAN unoffload handlingSimon Horman1-1/+4
otx2_sq_append_skb makes used of __vlan_hwaccel_push_inside() to unoffload VLANs - push them from skb meta data into skb data. However, it omitts a check for __vlan_hwaccel_push_inside() returning NULL. Found by inspection based on [1] and [2]. Compile tested only. [1] Re: [PATCH net-next v1] net: stmmac: Enable TSO on VLANs https://lore.kernel.org/all/ZmrN2W8Fye450TKs@shell.armlinux.org.uk/ [2] Re: [PATCH net-next v2] net: stmmac: Enable TSO on VLANs https://lore.kernel.org/all/CANn89i+11L5=tKsa7V7Aeyxaj6nYGRwy35PAbCRYJ73G+b25sg@mail.gmail.com/ Fixes: fd9d7859db6c ("octeontx2-pf: Implement ingress/egress VLAN offload") Signed-off-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-19virtio_net: fixing XDP for fully checksummed packets handlingHeng Qi1-1/+19
The XDP program can't correctly handle partially checksummed packets, but works fine with fully checksummed packets. If the device has already validated fully checksummed packets, then the driver doesn't need to re-validate them, saving CPU resources. Additionally, the driver does not drop all partially checksummed packets when VIRTIO_NET_F_GUEST_CSUM is not negotiated. This is not a bug, as the driver has always done this. Fixes: 436c9453a1ac ("virtio-net: keep vnet header zeroed after processing XDP") Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-19virtio_net: checksum offloading handling fixHeng Qi1-2/+10
In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle partially checksummed packets, and the validation of fully checksummed packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM negotiation. However, the specification erroneously stated: "If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags to zero and SHOULD supply a fully checksummed packet to the driver." This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag. Essentially, the device can facilitate the validation of these packets' checksums - a process known as RX checksum offloading - removing the need for the driver to do so. This scenario is currently not implemented in the driver and requires correction. The necessary specification correction[1] has been made and approved in the virtio TC vote. [1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html Fixes: 4f49129be6fa ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available") Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-19net: usb: ax88179_178a: improve reset checkJose Ignacio Tornos Martinez1-5/+13
After ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up") to not reset from usbnet_open after the reset from usbnet_probe at initialization stage to speed up this, some issues have been reported. It seems to happen that if the initialization is slower, and some time passes between the probe operation and the open operation, the second reset from open is necessary too to have the device working. The reason is that if there is no activity with the phy, this is "disconnected". In order to improve this, the solution is to detect when the phy is "disconnected", and we can use the phy status register for this. So we will only reset the device from reset operation in this situation, that is, only if necessary. The same bahavior is happening when the device is stopped (link set to down) and later is restarted (link set to up), so if the phy keeps working we only need to enable the mac again, but if enough time passes between the device stop and restart, reset is necessary, and we can detect the situation checking the phy status register too. cc: stable@vger.kernel.org # 6.6+ Fixes: ecf848eb934b ("net: usb: ax88179_178a: fix link status when link is set to down/up") Reported-by: Yongqin Liu <yongqin.liu@linaro.org> Reported-by: Antje Miederhöfer <a.miederhoefer@gmx.de> Reported-by: Arne Fitzenreiter <arne_f@ipfire.org> Tested-by: Yongqin Liu <yongqin.liu@linaro.org> Tested-by: Antje Miederhöfer <a.miederhoefer@gmx.de> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-06-18net: stmmac: No need to calculate speed divider when offload is disabledXiaolei Wang1-18/+22
commit be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") introduced a problem. When deleting, it prompts "Invalid portTransmitRate 0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable. Only when offload is enabled, speed divider needs to be calculated. Fixes: be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters") Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-18net: phy: dp83tg720: get master/slave configuration in link down stateOleksij Rempel1-3/+21
Get master/slave configuration for initial system start with the link in down state. This ensures ethtool shows current configuration. Also fixes link reconfiguration with ethtool while in down state, preventing ethtool from displaying outdated configuration. Even though dp83tg720_config_init() is executed periodically as long as the link is in admin up state but no carrier is detected, this is not sufficient for the link in admin down state where dp83tg720_read_status() is not periodically executed. To cover this case, we need an extra read role configuration in dp83tg720_config_aneg(). Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY") Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240614094516.1481231-2-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-18net: phy: dp83tg720: wake up PHYs in managed modeOleksij Rempel1-3/+15
In case this PHY is bootstrapped for managed mode, we need to manually wake it. Otherwise no link will be detected. Cc: stable@vger.kernel.org Fixes: cb80ee2f9bee1 ("net: phy: Add support for the DP83TG720S Ethernet PHY") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20240614094516.1481231-1-o.rempel@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-18net: phy: mxl-gpy: Remove interrupt mask clearing from config_initRaju Lakkaraju1-20/+38
When the system resumes from sleep, the phy_init_hw() function invokes config_init(), which clears all interrupt masks and causes wake events to be lost in subsequent wake sequences. Remove interrupt mask clearing from config_init() and preserve relevant masks in config_intr(). Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18net: lan743x: Support WOL at both the PHY and MAC appropriatelyRaju Lakkaraju3-8/+58
Prevent options not supported by the PHY from being requested to it by the MAC Whenever a WOL option is supported by both, the PHY is given priority since that usually leads to better power savings. Fixes: e9e13b6adc33 ("lan743x: fix for potential NULL pointer dereference with bare card") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18net: lan743x: disable WOL upon resume to restore full data path operationRaju Lakkaraju2-4/+50
When Wake-on-LAN (WoL) is active and the system is in suspend mode, triggering a system event can wake the system from sleep, which may block the data path. To restore normal data path functionality after waking, disable all wake-up events. Furthermore, clear all Write 1 to Clear (W1C) status bits by writing 1's to them. Fixes: 4d94282afd95 ("lan743x: Add power management support") Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-18qca_spi: Make interrupt remembering atomicStefan Wahren3-14/+11
The whole mechanism to remember occurred SPI interrupts is not atomic, which could lead to unexpected behavior. So fix this by using atomic bit operations instead. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20240614145030.7781-1-wahrenst@gmx.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-06-14Merge branch '40GbE' of ↵Jakub Kicinski2-3/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-06-11 (ice) This series contains updates to ice driver only. En-Wei Wu resolves IRQ collision during suspend. Paul corrects 200Gbps speed being reported as unknown. Wojciech adds retry mechanism when package download fails. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: implement AQ download pkg retry ice: fix 200G link speed message log ice: avoid IRQ collision to fix init failure on ACPI S3 resume ==================== Link: https://lore.kernel.org/r/20240613154514.1948785-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-14Merge tag 'wireless-2024-06-14' of ↵Jakub Kicinski3-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Various fixes: * cfg80211: wext scan * mac80211: monitor regression, scan counted_by, offload * iwlwifi: locking, 6 GHz scan, remain-on-channel * tag 'wireless-2024-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: mac80211: fix monitor channel with chanctx emulation wifi: mac80211: Avoid address calculations via out of bounds array indexing wifi: mac80211: Recalc offload when monitor stop wifi: iwlwifi: scan: correctly check if PSC listen period is needed wifi: iwlwifi: mvm: fix ROC version check wifi: iwlwifi: mvm: unlock mvm mutex wifi: cfg80211: wext: add extra SIOCSIWSCAN data check wifi: cfg80211: wext: set ssids=NULL for passive scans ==================== Link: https://lore.kernel.org/r/20240614085710.24103-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13net: mvpp2: use slab_build_skb for oversized framesAryan Srivastava1-1/+4
Setting frag_size to 0 to indicate kmalloc has been deprecated, use slab_build_skb directly. Fixes: ce098da1497c ("skbuff: Introduce slab_build_skb()") Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz> Reviewed-by: Kees Cook <kees@kernel.org> Link: https://lore.kernel.org/r/20240613024900.3842238-1-aryan.srivastava@alliedtelesis.co.nz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13ice: implement AQ download pkg retryWojciech Drewek1-2/+21
ice_aqc_opc_download_pkg (0x0C40) AQ sporadically returns error due to FW issue. Fix this by retrying five times before moving to Safe Mode. Sleep for 20 ms before retrying. This was tested with the 4.40 firmware. Fixes: c76488109616 ("ice: Implement Dynamic Device Personalization (DDP) download") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13ice: fix 200G link speed message logPaul Greenwalt1-0/+3
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support for 200G PHY speeds, but did not include 200G link speed message support. As a result the driver incorrectly reports Unknown for 200G link speed. Fix this by adding 200G support to ice_print_link_msg(). Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13ice: avoid IRQ collision to fix init failure on ACPI S3 resumeEn-Wei Wu1-1/+6
A bug in https://bugzilla.kernel.org/show_bug.cgi?id=218906 describes that irdma would break and report hardware initialization failed after suspend/resume with Intel E810 NIC (tested on 6.9.0-rc5). The problem is caused due to the collision between the irq numbers requested in irdma and the irq numbers requested in other drivers after suspend/resume. The irq numbers used by irdma are derived from ice's ice_pf->msix_entries which stores mappings between MSI-X index and Linux interrupt number. It's supposed to be cleaned up when suspend and rebuilt in resume but it's not, causing irdma using the old irq numbers stored in the old ice_pf->msix_entries to request_irq() when resume. And eventually collide with other drivers. This patch fixes this problem. On suspend, we call ice_deinit_rdma() to clean up the ice_pf->msix_entries (and free the MSI-X vectors used by irdma if we've dynamically allocated them). On resume, we call ice_init_rdma() to rebuild the ice_pf->msix_entries (and allocate the MSI-X vectors if we would like to dynamically allocate them). Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Tested-by: Cyrus Lien <cyrus.lien@canonical.com> Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-06-13bnxt_en: Adjust logging of firmware messages in case of released token in ↵Aleksandr Mishin1-1/+1
__hwrm_send() In case of token is released due to token->state == BNXT_HWRM_DEFERRED, released token (set to NULL) is used in log messages. This issue is expected to be prevented by HWRM_ERR_CODE_PF_UNAVAILABLE error code. But this error code is returned by recent firmware. So some firmware may not return it. This may lead to NULL pointer dereference. Adjust this issue by adding token pointer check. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8fa4219dba8e ("bnxt_en: add dynamic debug support for HWRM messages") Suggested-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240611082547.12178-1-amishin@t-argos.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded responseMichael Chan2-2/+61
Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize. Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum 96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the new speeds2 fields are beyond the legacy structure. Also modify bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96 bytes to make this failure more obvious. Fixes: 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118") Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20240612231736.57823-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-06-13gve: Clear napi->skb before dev_kfree_skb_any()Ziwei Xiao1-3/+5
gve_rx_free_skb incorrectly leaves napi->skb referencing an skb after it is freed with dev_kfree_skb_any(). This can result in a subsequent call to napi_get_frags returning a dangling pointer. Fix this by clearing napi->skb before the skb is freed. Fixes: 9b8dd5e5ea48 ("gve: DQO: Add RX path") Cc: stable@vger.kernel.org Reported-by: Shailend Chand <shailend@google.com> Signed-off-by: Ziwei Xiao <ziweixiao@google.com> Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by: Shailend Chand <shailend@google.com> Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com> Link: https://lore.kernel.org/r/20240612001654.923887-1-ziweixiao@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Powered by cgit, Gruvboxed by Blaster4385.