| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Use function pointers to abstract efuse access, and introduce an new
function to convert efuse power state that is needed by WiFi 7 chips.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
8922A is a 802.11be chip that can support 2/5/6 GHz bands 160MHz bandwidth.
Introduce the basic info such as firmware file name, some hardware address
and size, supported spatial stream, TX descriptor and so on, and then
we can add more attributes by later patches.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Remove the unused "const_amdpci_aspm" member of struct rtl_pci and
struct rtl_ps_ctl.
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Ping-Ke Shih <[email protected]>
Reviewed-by: Ilpo Järvinen <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Clang static analyzer complains that value stored to 'priv' is never read.
'priv' is useless, so remove it to save space.
Signed-off-by: Su Hui <[email protected]>
Acked-by: Brian Norris <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Sync Realtek Regulatory R44 and Realtek Channel Plan R65.
Configure 6 GHz field of Realtek regd on SG, TW, GD.
Signed-off-by: Zong-Zhe Yang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
According to BIOS configuration of Realtek ACPI DSM function 4,
RTW89_ACPI_DSM_FUNC_6G_BP, we handle the regd policy of 6 GHz.
Policy defines two modes as below.
1. `BLOCK` mode:
The countries in configured list are blocked.
2. `ALLOW` mode:
_Only_ the countries in configured list are allowed.
(i.e. others are all blocked.)
Then, when receiving regulatory notification at runtime, if 6 GHz
is blocked on the country, 6 GHz channels will be disabled.
Signed-off-by: Zong-Zhe Yang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Realtek ACPI DSM func 4, RTW89_ACPI_DSM_FUNC_6G_BP,
accepts a configuration via ACPI buffer as below.
| index | description |
-------------------------
| [0-2] | signature |
| [3] | reserved |
| [4] | policy mode |
| [5] | country count |
| [6-] | country list |
Through this function, BIOS can indicate to allow/block
6 GHz on some specific countries. Still, driver should
follow regd first before taking this configuration into
account.
Besides, add a bit in debug mask for ACPI.
Signed-off-by: Zong-Zhe Yang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Since 'drv_priv' is an in-place member allocated at the end of
'struct ieee80211_sta', it can't be NULL and so relevant checks
in 'rtl_action_proc()' and 'rtl_tx_agg_start()' may be dropped.
Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Dmitry Antipov <[email protected]>
Acked-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To reduce interrupts, configure the mitigation setting of 8922AE when
bringing interface up, and then check situations to decide turning on or
off the function. With this, interrupt count decreases to 20,141 from
202,141 in period of 20 seconds.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
To reduce interrupt count, configure mitigation register with thresholds
of time and packet count. We missed that 8852CE uses different register
address, so correct it. Then, interrupt counts down to 30,763 from 229,825
during stress test in 20 seconds.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The handlers include three parts -- 1) configure interrupt mask;
2) enable/disable interrupt; 3) recognize (read) interrupt status.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
For WiFi 7, interrupt status registers and their definitions are changed
a lot, but the logic is still the same, so define fields to reuse the code.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
At probe stage, we only do partial initialization to enable ability to
download firmware and read capabilities. After that, we use this pre_deinit
to disable HCI to save power.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Level 1 recovery is to recover TX/RX rings, so it needs PCI to stop/start
DMA. But, different chip gen have different implementations, either
register address/mask or function flow. So, configure callback of
stop/start DMA by chip gen.
Signed-off-by: Zong-Zhe Yang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Configure callback of reset BDRAM (buffer descriptor RAM) by chip gen.
Refine the one of 802.11ax chip gen and drop a redundant duplicate of it
in 802.11ax chip gen. Then, assign right callback of rst_bdram for HCI ops
which needs to do callback according to chip gen.
Signed-off-by: Zong-Zhe Yang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Variable len is not effectively used, so delete it.
drivers/net/wireless/intel/iwlegacy/4965-mac.c:4234:7: warning: variable 'len' set but not used.
Reported-by: Abaci Robot <[email protected]>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7223
Signed-off-by: Jiapeng Chong <[email protected]>
Acked-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Refer to Mediatek vendor driver RxDCOC_Calibration() function, when
performing gainfreeze calibration, we should write register 140
instead of 141. This fix can reduce the total calibration time from
6 seconds to 1 second.
Signed-off-by: Shiji Yang <[email protected]>
Acked-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/TYAP286MB0315B13B89DF57B6B27BB854BCAFA@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
Libertas no longer references the iw_handler infrastructure or wext_spy,
so neither of the 'select' statements are used any more.
Fixes: e86dc1ca4676 ("Libertas: cfg80211 support")
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
./drivers/net/wireless/ath/ath11k/fw.c:136:2-3: Unneeded semicolon
Reported-by: Abaci Robot <[email protected]>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7073
Signed-off-by: Yang Li <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
If we already have gotten the rproc_handle (meaning the "qcom,rproc"
property is defined in the devicetree), it's a valid state that the
remoteproc module hasn't probed yet so we should defer probing instead
of just failing to probe.
This resolves a race condition when the ath11k driver probes and fails
before the wpss remoteproc driver has probed, like the following:
[ 6.232360] ath11k 17a10040.wifi: failed to get rproc
[ 6.232366] ath11k 17a10040.wifi: failed to get rproc: -22
[ 6.232478] ath11k: probe of 17a10040.wifi failed with error -22
...
[ 6.252415] remoteproc remoteproc2: 8a00000.remoteproc is available
[ 6.252776] remoteproc remoteproc2: powering up 8a00000.remoteproc
[ 6.252781] remoteproc remoteproc2: Booting fw image qcom/qcm6490/fairphone5/wpss.mdt, size 7188
So, defer the probe if we hit that so we can retry later once the wpss
remoteproc is available.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01264-QCAMSLSWPLZ-1.37886.3
Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Luca Weiss <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The commands should be sorted inside the group definition.
Fix the ordering so we won't get following warning:
WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg))
Link: https://lore.kernel.org/regressions/[email protected]/
Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/
Fixes: b6e3d1ba4fcf ("wifi: iwlwifi: mvm: implement new firmware API for statistics")
Tested-by: Niklāvs Koļesņikovs <[email protected]>
Tested-by: Damian Tometzki <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When a hardware reset is triggered, all registers are reset, so all
queues are forced to stop in hardware interface. However, mac80211
will not automatically stop the queue. If we don't manually stop the
beacon queue, the queue will be deadlocked and unable to start again.
This patch fixes the issue where Apple devices cannot connect to the
AP after calling ieee80211_restart_hw().
Signed-off-by: Shiji Yang <[email protected]>
Acked-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/TYAP286MB031530EB6D98DCE4DF20766CBCA4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
rt2800 has a lot of registers to control the RTS enable/disable
status for different rates. And the driver control them via
rt2800_set_rts_threshold(). When RTS was disabled in user
interface, this function won't be called at all. This means that
the RTS is still 'on' for CCK and OFDM rates. So we'd better to
disable them by default because it should be like this. The RTS
for HT20 and HT40 is already default off so we don't need to
touch them. If we toggle the RTS status, these register bits
will be enable/disable again by rt2800_set_rts_threshold().
Signed-off-by: Shiji Yang <[email protected]>
Acked-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/TYAP286MB03155DDB953155B7A2DE849ABCA4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
When I tried to fix the watchdog of rt2800, I found that sometimes
the watchdog can not reset the hung device. This is because the
queue is not completely stuck, it just becomes very slow. The MTK
vendor driver for the new chip MT7603/MT7612 has a DMA busy watchdog
to detect device hangs by checking DMA busy status. This watchdog
implementation is something similar to it. To reduce unnecessary
reset, we can check the INT_SOURCE_CSR register together as I found
that when the radio hung, the RX/TX coherent interrupt will always
stuck at triggered state.
The 'watchdog' module parameter has been extended to control all
watchdogs(0=disabled, 1=hang watchdog, 2=DMA watchdog, 3=both). This
new watchdog function is a slight schedule and it won't affect the
transmission speed. So we can turn on it by default. Due to the
INT_SOURCE_CSR register is invalid on rt2800 USB NICs, the DMA busy
watchdog will be automatically disabled for them.
Tested on MT7620 and RT5350.
Signed-off-by: Shiji Yang <[email protected]>
Acked-by: Stanislaw Gruszka <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/TYAP286MB0315D7462CE08A119A99DE34BCA4A@TYAP286MB0315.JPNP286.PROD.OUTLOOK.COM
|
|
The broadcast packets will be filtered in the FIF_ALLMULTI flag in
the original code, which causes beacon packets to be filtered out
and disconnection. Therefore, we fix it.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Chih-Kang Chang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Since 'ieee80211_txq_get_depth()' allows NULL for 2nd and
3rd arguments, simplify '__rtw_tx_work()' by dropping unused
'byte_cnt'. Compile tested only.
Signed-off-by: Dmitry Antipov <[email protected]>
Acked-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
content
To notify firmware TDMA timeslot assignment, append TDMA parameters when
sending policy H2C firmware command. However, compiler warns we do memcpy()
data to val[] field of TLV struct. To avoid this, assign the struct value
with simple '=' instead. Compile tested only.
rtw89/coex.c: In function '_append_tdma':
drivers/net/wireless/realtek/rtw89/coex.c:1585:17:
warning: writing 8 bytes into a region of size 0 [-Wstringop-overflow=]
1585 | memcpy(&v3->tdma, &dm->tdma, sizeof(v3->tdma));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/wireless/realtek/rtw89/coex.h:8,
from drivers/net/wireless/realtek/rtw89/coex.c:5:
drivers/net/wireless/realtek/rtw89/core.h:2703:37:
note: at offset [5714, 71249] into destination object 'ver' of size 8
2703 | const struct rtw89_btc_ver *ver;
| ^~~
drivers/net/wireless/realtek/rtw89/coex.c:1579:17:
warning: writing 8 bytes into a region of size 0 [-Wstringop-overflow=]
1579 | memcpy(v, &dm->tdma, sizeof(*v));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtw89/core.h:2703:37:
note: at offset [5710, 71245] into destination object 'ver' of size 8
2703 | const struct rtw89_btc_ver *ver;
| ^~~
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
For normal use, we do additional settings than mac_pre_init, such as
more TX/RX DMA channels, interrupt mitigation and etc.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
PCI LTR (Latency Tolerance Reporting) is a capability to yield expected
power consumption, and we configure the parameters according to design.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Call this function when doing MAC initialization at probe stage. It does
partial initial registers only, because we only need basic ability to
download firmware. The function to clear index is the sub-function,
so set its pointer as well.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
clear PCI ring index
Use gen_def pointer to call three WiFi 6 specific functions, and add _ax
suffix to them. Then, we will implement functions for WiFi 7 chips later.
The mac_{pre,post}_init are used to initialize PCI during doing MAC
initialization, and clear PCI ring index to make index consistent between
driver, firmware and hardware.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In order to reuse PCI initial and configuration flows, add struct
rtw89_pci_gen_def to abstract the differences between WiFi 6/7 generations.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Simplify 'wilc_scan()' assuming 'struct wilc_priv *' is the only data
passed to '(*scan_result)()' callback and thus avoid typeless 'void *'
pointers in related code, including 'struct wilc_user_scan_req'.
Compile tested only.
Signed-off-by: Dmitry Antipov <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Remove set but otherwise unused 'ch' member of 'struct wilc_conn_info'
and avoid typeless 'void *' pointers in '(*conn_result)()' callback.
Likewise for 'wilc_parse_join_bss_param()'. Compile tested only.
Signed-off-by: Dmitry Antipov <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Check for if the usb_alloc_urb() failed.
Fixes: 68d57a07bfe5 ("wireless: add plfxlc driver for pureLiFi X, XL, XC devices")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
No matter CLC is enabled or disabled, the driver should initialize
the default value 0xff for channel configuration of CLC. Otherwise,
the zero value would disable channels.
Reported-and-tested-by: Ben Greear <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Fixes: 09382d8f8641 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/5a976ddf1f636b5cb809373501d3cfdc6d8de3e4.1698648737.git.deren.wu@mediatek.com
|
|
strncpy() is deprecated [1] and we should prefer less ambiguous
interfaces.
In this case, arvif->u.ap.ssid has its length maintained by
arvif->u.ap.ssid_len which indicates it may not need to be
NUL-terminated. Make this explicit with __nonstring and use a plain old
memcpy.
This is also consistent with future copies into arvif->u.ap.ssid:
if (changed & BSS_CHANGED_SSID &&
vif->type == NL80211_IFTYPE_AP) {
arvif->u.ap.ssid_len = vif->cfg.ssid_len;
if (vif->cfg.ssid_len)
memcpy(arvif->u.ap.ssid, vif->cfg.ssid,
vif->cfg.ssid_len);
arvif->u.ap.hidden_ssid = info->hidden_ssid;
}
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://github.com/KSPP/linux/issues/90
Cc: [email protected]
Signed-off-by: Justin Stitt <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/20231024-strncpy-drivers-net-wireless-ath-ath10k-mac-c-v2-1-4c1f4cd4b4df@google.com
|
|
Since 'user_stats' is a fixed-size array of 'struct htt_ppdu_user_stats'
in 'struct htt_ppdu_stats', any of its member can't be NULL and so
relevant check may be dropped.
Signed-off-by: Ma Ke <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Wireless RNDIS USB is a new-style CFG80211 driver for 802.11b and
802.11g USB hardware from around 2004 to 2006. This makes it more modern
than any of the others, but Kalle already classified it as "legacy"
in commit 298e50ad8eb8f ("wifi: move raycs, wl3501 and rndis_wlan to
legacy directory").
Jussi Kivilinna worked on this driver between 2008 and 2012, and it has
only seen cosmetic updates after that.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
Planet WL3501 is another PCMCIA driver for pre-802.11b interfaces
(2Mbit/s) with incomplete CFG80211 support.
This was marked as orphaned in 2017 but has been unmaintained
for a long time before that.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
Aviator/Raytheon is an early PCMCIA driver, apparently predating 802.11b
and only supporting wireless extensions.
The driver has been orphaned since 2010 and only seen cosmetic updates
long before than. Jean Tourrilhes pointed out in a 2005 changelog that
he tested a change on actual hardware, which was apparently already
noteworthy back then.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
Orinoco is a PIO-only ISA/PCMCIA 802.11b device with extra bus interface
connections for PCI/Cardbus/mini-PCI and a few pre-2002 Apple PowerMac
variants. It supports both wireless extensions and CFG80211, but I could
not tell if it requires using both.
This device used to be one of the most common ones 20 years ago, but
has been orphaned for most of the time since then, and the conversion
to cfg80211 has stalled in 2010.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
This is a wireless extensions style driver for 802.11b USB dongles,
with partial support for cfg80211 interfaces.
As these are all external dongles, there are probably few users that
have not yet replaced them with cheap 802.11n devices that work better.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
HostAP is an ISA/PCMCIA style 802.11b driver supporting only
wireless extensions, and some custom ioctls (already removed).
Some devices include a legacy PCI bridge but no DMA.
The driver was marked obsolete in 2016 and is highly unlikely
to still have any users.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
Cisco Aironet is an 802.11b PCMCIA and mini-PCI with limited support
for Cardbus DMA and for CFG80211.
Both PCMCIA and WEXT are deprecated, and there is little chance
that anyone is still using this driver, so remove it.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
Atmel at76c502/at76c504/at76c506 is a PIO-only (PCMCIA, mini-PCI
and Cardbus) 802.11b driver with incomplete CFG80211 support.
Both PCMCIA and WEXT are deprecated, and there is little chance
that anyone is still using this driver, so remove it.
The related at76c50x USB driver uses MAC80211 and remains.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
With all the other PCMCIA WLAN adapters gone from the kernel, this is now
the last remaining device with this interface, but as far as I can tell,
all the actual libertas users were actually using either SDIO or USB.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
PHY status IEs is used to have more information about received packets,
such as RSSI and EVM. For each PHY IE type, it has different predefined
PHY IE length, and the length are changed, so add them for WiFi 7 chips
accordingly.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
For WiFi 7 chips, some fields and predefined length are changed, so
add them accordingly.
The mac_id field is used to identify peer that send a packet, and we can
use it to know RSSI and traffic from the peer. For WiFi 7 chips,
RXWD.mac_id of PPDU status packet is not set by hardware. Instead, we
should fill it by rxinfo_user[].mac_id of PPDU status content.
Also, filter out invalid reports to prevent warning messages keep showing.
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Different chip can support different max user in one PPDU report.
So, we now configure it in chip info.
Signed-off-by: Zong-Zhe Yang <[email protected]>
Signed-off-by: Ping-Ke Shih <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|