aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2024-03-21wifi: ath12k: Refactor error handler of Rxdma replenishKarthikeyan Periyasamy1-11/+3
The Rxdma replenish handler currently contains redundant code in both the success and error cases. To avoid the redundant code, implement a conditional jump mechanism by placing a goto statement to prevent unnecessary execution of the error handling code when the operation is successful. This change streamline the code readability and enhance its efficiency. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-21wifi: ath12k: Optimize the lock contention of used list in Rx data pathKarthikeyan Periyasamy4-54/+114
When a packet arrives in Rx rings, the RX descriptor moves from the used list to the free list. Then, the rxdma ring gets replenished, where the Rx descriptor again moves from the free list to the used list. At the end, the descriptor came to the used list with unnecessary list movement. The descriptor used list is maintained in the Rxdma ring structure, which creates lock contention for the list operations (add, delete) in the Rx data path. Optimize the Rx data path by removing the used list from the common Rxdma ring and maintain as a local variable in the Rx ring handler itself, which avoid lock contention. Now, to find the used list descriptor during descriptor cleanup, we need to check the in_use flag for each Rx descriptor. This is a simple UDP UL throughput test case results on x86+NUC device with QCN9274 card, which clearly shows 8% to 12% improvement in the CPU idle for the same ingress traffic. Before: Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle Average: all 0.24 0.00 12.54 0.08 0.00 23.33 0.00 0.00 0.00 63.81 After: Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %gnice %idle Average: all 0.34 0.00 4.60 0.00 0.00 19.59 0.00 0.00 0.00 75.47 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-21wifi: ath12k: Refactor Rxdma buffer replinish argumentKarthikeyan Periyasamy1-6/+3
Currently, the Rxdma buffer replenish procedure implicitly retrieves the number of free entries when the caller passes req_entries as zero. This is helpful to replenishing the Rxdma ring when the caller is unaware of the number of entries to replenish. After the Rxdma ring is initialized, we can pass req_entries as zero to replenish all the free entry in the Rxdma ring. This change helps to align the argument req_entries to the used list entries for better code readability. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-20wifi: ath12k: use correct flag field for 320 MHz channelsAloka Dixit1-1/+1
Due to an error during rebasing the patchset 320 MHz channel support got broken. ath12k was setting the QoS bit instead of the correct flag. WMI_PEER_EXT_320MHZ (0x2) is defined as an extended flag, replace peer_flags by peer_flags_ext while sending peer data. This affected both QCN9274 and WCN7850 which use the same flag. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: 6734cf9b4cc7 ("wifi: ath12k: peer assoc for 320 MHz") Signed-off-by: Aloka Dixit <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-20wifi: ath12k: remove duplicate definitions in wmi.hKang Yang1-6/+0
There are some duplicate definitions in wmi.h, remove them. No functional changes, compile tested only. Signed-off-by: Kang Yang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-20wifi: ath12k: fix desc address calculation in wbm tx completionThiraviyam Mariyappan2-3/+1
In tx completion, status desc is obtained from offsetting the address from wbm ring. Having HTT_TX_WBM_COMP_STATUS_OFFSET(8) and reserved 8 bytes in status desc offsets the address twice and read the values from the incorrect address. Hence, remove the HTT_TX_WBM_COMP_STATUS_OFFSET from wbm completion address calculation. Also this patch is applicable for WCN7850. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Thiraviyam Mariyappan <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-20wifi: rtl8xxxu: enable MFP supportMartin Kaistra1-2/+7
In order to connect to networks which require 802.11w, add the MFP_CAPABLE flag and let mac80211 do the actual crypto in software. When a robust management frames is received, rx_dec->swdec is not set, even though the HW did not decrypt it. Extend the check and don't set RX_FLAG_DECRYPTED for these frames in order to use SW decryption. Signed-off-by: Martin Kaistra <[email protected]> Reviewed-by: Ping-Ke Shih <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Link: https://msgid.link/[email protected]
2024-03-18wifi: mwifiex: Add missing MODULE_FIRMWARE() for SD8801Víctor Gonzalo1-0/+1
The module metadata for the firmware file mrvl/sd8801_uapsta.bin is missing. Signed-off-by: Víctor Gonzalo <[email protected]> Acked-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: ath11k: advertise P2P dev support for QCA6390/WCN6855/QCA2066Kang Yang2-4/+25
Now that all the necessary pieces are implemented we can enable P2P support for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: ath11k: change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066Kang Yang1-1/+6
Current ROC scan will filter probe request. So P2P device cannot receive probe request. But it is necessary for P2P mode. A P2P device cannot be discovered if it doesn't respond to others' probe request. In addition, station won't filter probe request with common scan. But for station, there is no needed to receive probe request. Based on the above two points, change scan flag scan_f_filter_prb_req for QCA6390/WCN6855/QCA2066. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: ath11k: change WLAN_SCAN_PARAMS_MAX_IE_LEN from 256 to 512Kang Yang1-1/+1
Mac80211 needs more space for P2P scan ie in P2P mode, 256 is not enough, resize it to 512. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: ath11k: implement handling of P2P NoA eventKang Yang5-2/+271
The NoA(Notice of Absence) attribute is used by the P2P Group Owner to signal its absence due to power save timing, concurrent operation, or off-channel scanning. It is also used in the P2P Presence Request-Response mechanism. The NoA attribute shall be present in the P2P IE in the beacon frames transmitted by a P2P Group Owner when a NoA schedule is being advertised, or when the CTWindow is non-zero. So add support to update P2P information after P2P GO is up through event WMI_P2P_NOA_EVENTID, and always put it in probe resp. Create p2p.c and p2p.h for P2P related functions and definitions. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: ath11k: add P2P IE in beacon templateKang Yang3-8/+143
P2P Element is a necessary component of P2P protocol communication. It contains the Vendor Specific Information Element which includes the WFA OUI and an OUI Type indicating P2P. Add P2P IE in beacon template, and implement WMI interface for it. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: ath11k: change interface combination for P2P modeKang Yang1-22/+25
Current interface combination doesn't support P2P mode. So change it for P2P mode. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.37 Tested-on: QCA2066 hw2.1 PCI WLAN.HSP.1.1-03926.13-QCAHSPSWPL_V2_SILICONZ_CE-2.52297.2 Signed-off-by: Kang Yang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: SDIO device driver for RTL8723CSFiona Klute3-0/+58
This driver uses the new rtw8703b chip driver code. Acked-by: Ping-Ke Shih <[email protected]> Acked-by: Ulf Hansson <[email protected]> # For SDIO Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: Reset 8703b firmware before downloadFiona Klute1-0/+6
Sometimes 8703b firmware is still active from previous use when the driver needs to download the firmware during MAC activation. Reset it in that case. Acked-by: Ping-Ke Shih <[email protected]> Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: Add rtw8703b_tables.cFiona Klute1-0/+902
Initialization tables for rtw8703b: Initial register values and TX power limits. Acked-by: Ping-Ke Shih <[email protected]> Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: Add rtw8703b_tables.hFiona Klute1-0/+14
Initialization table definitions for rtw8703b. Acked-by: Ping-Ke Shih <[email protected]> Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: Add rtw8703b.cFiona Klute1-0/+2109
This is the main source for the new rtw88_8703b chip driver. Acked-by: Ping-Ke Shih <[email protected]> Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: Add rtw8703b.hFiona Klute1-0/+102
This is the main header for the new rtw88_8703b chip driver. Acked-by: Ping-Ke Shih <[email protected]> Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: Add definitions for 8703b chipFiona Klute3-0/+16
default_cck_index is used in power track, the rx_cck_agc_report_type for RX PHY status. GET_RX_DESC_BW is an RX descriptor field not used by the other chip drivers. Acked-by: Ping-Ke Shih <[email protected]> Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: Debug output for rtw8723x EFUSEFiona Klute2-0/+170
Some 8703b chips contain invalid EFUSE data, getting detailed information is critical when analyzing issues caused by that. Acked-by: Ping-Ke Shih <[email protected]> Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw88: Shared module for rtw8723x devicesFiona Klute6-900/+1107
The already supported 8723d chip is very similar to 8703b/8723cs, split code that can be shared into a new module. The spec definition tables are combined into a struct so we only need one EXPORT_SYMBOL for them all. Acked-by: Ping-Ke Shih <[email protected]> Tested-by: Pavel Machek <[email protected]> Signed-off-by: Fiona Klute <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw89: 8922a: add 8922ae to Makefile and KconfigPing-Ke Shih2-1/+26
Add 8922AE to Makefile and Kconfig. Currently, it can support STA, AP and monitor modes with good performance. Implemented initial BT-coexistence function only, and will to fine tune this component. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw89: 8922a: update chip parameter for coexChing-Te Ku1-0/+149
Implement the chip operation function for 8922a, it related to TX power, RX gain, antenna position, packet priority and so on. Also assign coexistence priority table for hardware PTA using. Add settings to avoid uncertainties propagation when Wi-Fi Rx due to RF gain mismatch. Signed-off-by: Ching-Te Ku <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw89: coex: Add TDMA slot parameter setting version 7Ching-Te Ku3-80/+304
In order to packet up the slots information, the TLV header has updated. TDMA slot parameters also use the TLV header to packet up to H2C, so upgrade to version 7. Signed-off-by: Ching-Te Ku <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw89: coex: Add TDMA version 7Ching-Te Ku1-2/+18
In order to packet up the slots information, the TLV header has updated. TDMA also use the TLV header to packet up to H2C, so upgrade to version 7. Signed-off-by: Ching-Te Ku <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw89: coex: Add antenna setting function for RTL8922AChing-Te Ku3-2/+197
Because there is new hardware structure and Wi-Fi 7 protocol, the antenna settings need to concern more complex for Wi-Fi 7 using. The antenna setting included grant control signal, they decide which MAC/Port or Bluetooth can do traffic. Signed-off-by: Ching-Te Ku <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw89: coex: Add WiFi role info format version 8Ching-Te Ku6-25/+590
In order to control the hardware band and related protocol control, add version 8 format and related logic to control the mechanism. Signed-off-by: Ching-Te Ku <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-14wifi: rtw89: coex: fix configuration for shared antenna for 8922APing-Ke Shih1-1/+1
WiFi 2x2 + BT combo cards can be two or three physical antenna. For two antenna case, one antenna is shared by WiFi and BT, and different configuration should be applied. Fix the typo. This problem was found by Coccicheck, and actually that is a typo instead: rtw8922a.c:2235:2-4: WARNING: possible condition with no effect (if == else) Fixes: 652c9642eda6 ("wifi: rtw89: coex: add init_info H2C command format version 7") Closes: https://lore.kernel.org/linux-wireless/[email protected]/ Cc: Ching-Te Ku <[email protected]> Cc: Jakub Kicinski <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-13Merge tag 'thermal-6.9-rc1' of ↵Linus Torvalds2-41/+34
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly change the thermal core in a few ways allowing thermal drivers to be simplified, in particular in their removal and failing probe handling parts that are notoriously prone to errors, and propagate the changes to several drivers. Apart from that, support for a new platform is added (Intel Lunar Lake-M), some bugs are fixed and some code is cleaned up, as usual. Specifics: - Store zone trips table and zone operations directly in struct thermal_zone_device (Rafael Wysocki) - Fix up flex array initialization during thermal zone device registration (Nathan Chancellor) - Rework writable trip points handling in the thermal core and several drivers (Rafael Wysocki) - Thermal core code cleanups (Dan Carpenter, Flavio Suligoi) - Use thermal zone accessor functions in the int340x Intel thermal driver (Rafael Wysocki) - Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas Pandruvada) - Minor fixes for thermal governors (Rafael Wysocki, Di Shen) - Trip point handling fixes for the iwlwifi wireless driver (Rafael Wysocki) - Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)" * tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits) thermal: core: remove unnecessary check in trip_point_hyst_store() thermal: intel: int340x_thermal: Use thermal zone accessor functions thermal: core: Remove excess empty line from a comment thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID thermal: core: Eliminate writable trip points masks thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: core: Drop the .set_trip_hyst() thermal zone operation thermal: core: Add flags to struct thermal_trip thermal: core: Move initial num_trips assignment before memcpy() thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS thermal: intel: Adjust ops handling during thermal zone registration thermal: ACPI: Constify acpi_thermal_zone_ops thermal: core: Store zone ops in struct thermal_zone_device thermal: intel: Discard trip tables after zone registration thermal: ACPI: Discard trips table after zone registration thermal: core: Store zone trips table in struct thermal_zone_device ...
2024-03-13Merge tag 'spi-v6.9' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This release sees some exciting changes from David Lechner which implements some optimisations that have been talked about for a long time which allows client drivers to pre-prepare SPI messages for repeated or low latency use. This lets us move work out of latency sensitive paths and avoid repeating work for frequently performed operations. As well as being useful in itself this will also be used in future to allow controllers to directly trigger SPI operations (eg, from interrupts). Otherwise this release has mostly been focused on cleanups, plus a couple of new devices: - Support for pre-optimising messages - A big set of updates from Uwe Kleine-König moving drivers to use APIs with more modern terminology for controllers - Major overhaul of the s3c64xx driver - Support for Google GS101 and Samsung Exynos850" * tag 'spi-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (122 commits) spi: Introduce SPI_INVALID_CS and is_valid_cs() spi: Fix types of the last chip select storage variables spi: Consistently use BIT for cs_index_mask spi: Exctract spi_dev_check_cs() helper spi: Exctract spi_set_all_cs_unused() helper spi: s3c64xx: switch exynos850 to new port config data spi: s3c64xx: switch gs101 to new port config data spi: s3c64xx: deprecate fifo_lvl_mask, rx_lvl_offset and port_id spi: s3c64xx: get rid of the OF alias ID dependency spi: s3c64xx: introduce s3c64xx_spi_set_port_id() spi: s3c64xx: let the SPI core determine the bus number spi: s3c64xx: allow FIFO depth to be determined from the compatible spi: s3c64xx: retrieve the FIFO depth from the device tree spi: s3c64xx: determine the fifo depth only once spi: s3c64xx: allow full FIFO masks spi: s3c64xx: define a magic value spi: dt-bindings: introduce FIFO depth properties spi: axi-spi-engine: use struct_size() macro spi: axi-spi-engine: use __counted_by() attribute spi: axi-spi-engine: remove p from struct spi_engine_message_state ...
2024-03-12wifi: ath11k: don't force enable power save on non-running vdevsBaochen Qiang1-8/+1
Currently we force enable power save on non-running vdevs, this results in unexpected ping latency in below scenarios: 1. disable power save from userspace. 2. trigger suspend/resume. With step 1 power save is disabled successfully and we get a good latency: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=5.13 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=5.45 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=5.99 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=6.34 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=4.47 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=6.45 ms While after step 2, the latency becomes much larger: PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=17.7 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=15.0 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=14.3 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=16.5 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=20.1 ms The reason is, with step 2, power save is force enabled due to vdev not running, although mac80211 was trying to disable it to honor userspace configuration: ath11k_pci 0000:03:00.0: wmi cmd sta powersave mode psmode 1 vdev id 0 Call Trace: ath11k_wmi_pdev_set_ps_mode ath11k_mac_op_bss_info_changed ieee80211_bss_info_change_notify ieee80211_reconfig ieee80211_resume wiphy_resume This logic is taken from ath10k where it was added due to below comment: Firmware doesn't behave nicely and consumes more power than necessary if PS is disabled on a non-started vdev. However we don't know whether such an issue also occurs to ath11k firmware or not. But even if it does, it's not appropriate because it goes against userspace, even cfg/mac80211 don't know we have enabled it in fact. Remove it to fix this issue. In this way we not only get a better latency, but also, and the most important, keeps the consistency between userspace and kernel/driver. The biggest price for that would be the power consumption, which is not that important, compared with the consistency. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: b2beffa7d9a6 ("ath11k: enable 802.11 power save mode in station mode") Signed-off-by: Baochen Qiang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-12wifi: brcmfmac: pcie: handle randbuf allocation failureDuoming Zhou1-5/+10
The kzalloc() in brcmf_pcie_download_fw_nvram() will return null if the physical memory has run out. As a result, if we use get_random_bytes() to generate random bytes in the randbuf, the null pointer dereference bug will happen. In order to prevent allocation failure, this patch adds a separate function using buffer on kernel stack to generate random bytes in the randbuf, which could prevent the kernel stack from overflow. Fixes: 91918ce88d9f ("wifi: brcmfmac: pcie: Provide a buffer of random bytes to the device") Suggested-by: Arnd Bergmann <[email protected]> Signed-off-by: Duoming Zhou <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-12wifi: rtw89: Correct EHT TX rate on 20MHz connectionDian-Syuan Yang1-4/+9
We used EHT capability of 20MHz-only as rate mask to RA (rate adaptive) H2C command when connecting with AP set EHT 20MHz. It would get the wrong rate mask and the MCS rate can only reach MCS11. According to the description of 802.11be spec, if all supported channel bandwidth field of HE PHY capabilities are zero, then the EHT capability of 20MHz-only is valid. As a result, we adjust the code to set correct rate mask based on HE PHY bandwidth capability. Signed-off-by: Dian-Syuan Yang <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-11wifi: ath11k: adjust a comment to reflect realityKevin Lo1-3/+2
On QCA6390/QCN9074/WCN6855, MHISTATUS may still have SYSERR bit set after SOC_GLOBAL_RESET. Signed-off-by: Kevin Lo <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-08Merge tag 'wireless-next-2024-03-08' of ↵Jakub Kicinski102-998/+2580
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The fourth "new features" pull request for v6.9 with changes both in stack and in drivers. The theme in this pull request is to fix sparse warnings but we still have some left in wireless subsystem. Otherwise quite normal. Major changes: rtw89 * NL80211_EXT_FEATURE_SCAN_RANDOM_SN support * NL80211_EXT_FEATURE_SET_SCAN_DWELL support rtw88 * support for more rtw8811cu and rtw8821cu devices mt76 * mt76x2u: add Netgear WNDA3100v3 USB * mt7915: newer ADIE version support * mt7925: radio temperature sensor support * mt7996: remove GCMP IGTK offload * tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits) wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode wifi: rtw89: wow: set security engine options for 802.11ax chips only wifi: rtw89: update suspend/resume for different generation wifi: rtw89: wow: update config mac function with different generation wifi: rtw89: update DMA function with different generation wifi: rtw89: wow: update WoWLAN status register for different generation wifi: rtw89: wow: update WoWLAN reason register for different chips wifi: brcm80211: handle pmk_op allocation failure wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR wifi: rtw89: coex: When Bluetooth not available don't set power/gain wifi: rtw89: coex: add return value to ensure H2C command is success or not wifi: rtw89: coex: Reorder H2C command index to align with firmware wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic wifi: rtw89: coex: add init_info H2C command format version 7 wifi: rtw89: 8922a: add coexistence helpers of SW grant wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt wifi: cw1200: restore endian swapping wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte wifi: rtw88: 8821c: Fix false alarm count ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-08wifi: ath10k: poll service ready message before failingBaochen Qiang1-3/+23
Currently host relies on CE interrupts to get notified that the service ready message is ready. This results in timeout issue if the interrupt is not fired, due to some unknown reasons. See below logs: [76321.937866] ath10k_pci 0000:02:00.0: wmi service ready event not received ... [76322.016738] ath10k_pci 0000:02:00.0: Could not init core: -110 And finally it causes WLAN interface bring up failure. Change to give it one more chance here by polling CE rings, before failing directly. Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Fixes: 5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices") Reported-by: James Prestwood <[email protected]> Tested-By: James Prestwood <[email protected]> # on QCA6174 hw3.2 Link: https://lore.kernel.org/linux-wireless/[email protected]/ Signed-off-by: Baochen Qiang <[email protected]> Acked-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-08wifi: ath11k: fix soc_dp_stats debugfs file permissionJeff Johnson1-2/+2
Currently the soc_dp_stats debugfs file has the following permissions: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -rw------- 1 root root 0 Mar 4 15:04 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats However this file does not actually support write operations -- no .write() method is registered. Therefore use the correct permissions when creating the file. After the change: # ls -l /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats -r-------- 1 root root 0 Mar 4 15:15 /sys/kernel/debug/ath11k/pci-0000:03:00.0/soc_dp_stats Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/20240305-fix-soc_dp_stats-permission-v1-1-2ec10b42f755@quicinc.com
2024-03-08wifi: ath11k: remove obsolete struct wmi_start_scan_argJeff Johnson1-29/+1
ath11k inherited struct wmi_start_scan_arg from ath10k. However, in ath11k, this struct is unused -- struct scan_req_params is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/20240226-ath11k-obsolete-wmi_start_scan_arg-v1-1-c0b94c6e191d@quicinc.com
2024-03-08wifi: ath12k: remove obsolete struct wmi_start_scan_argJeff Johnson1-28/+0
ath12k inherited struct wmi_start_scan_arg from ath11k. However, in ath12k, this struct is unused -- struct ath12k_wmi_scan_req_arg is used for this functionality. So remove the unused struct. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/20240226-ath12k-obsolete-wmi_start_scan_arg-v1-1-07b0b563cb27@quicinc.com
2024-03-05Merge tag 'ath-next-20240305' of ↵Kalle Valo8-72/+26
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath ath.git patches for v6.9 Only some minor cleanup in ath11k and ath12k. Adding Jeff as the maintainer for ath10k, ath11k and ath12k DT bindings.
2024-03-05wifi: rtw89: wow: move release offload packet earlier for WoWLAN modeChin-Yen Lee1-2/+2
Now WoWLAN firmware will disable PCIE DMA after driver call cfg_wake function, and it will lead to release offload packet fail because driver can't receive completion notification from firmware. We move release offload packet earlier to avoid this error. Signed-off-by: Chin-Yen Lee <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-05wifi: rtw89: wow: set security engine options for 802.11ax chips onlyChin-Yen Lee1-0/+3
The security engine is set for management frames by default for 802.11be chips, so no need to set it in WoWLAN flow. Signed-off-by: Chin-Yen Lee <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-05wifi: rtw89: update suspend/resume for different generationChin-Yen Lee4-1/+57
The setting during suspend or resume is different between different generation, so update it. Signed-off-by: Chin-Yen Lee <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-05wifi: rtw89: wow: update config mac function with different generationChin-Yen Lee6-29/+117
The registers to configure mac function for WoWLAN mode that are different from different generation, so update them. Signed-off-by: Chin-Yen Lee <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-05wifi: rtw89: update DMA function with different generationChin-Yen Lee5-24/+68
The register of control and polling function for TX/RX DMA is different from different generation, so update them. Also rename polling_dma function to polling_dma_idle to avoid misunderstanding. Signed-off-by: Chin-Yen Lee <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-05wifi: rtw89: wow: update WoWLAN status register for different generationChin-Yen Lee5-1/+11
The statue register is for driver to check if WoWLAN mode works or stops successfully. It is changed for new generation, so update it. Signed-off-by: Chin-Yen Lee <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-05wifi: rtw89: wow: update WoWLAN reason register for different chipsChin-Yen Lee7-8/+7
The WoWLAN reason register is used for driver to get the wakeup reason for reporting to cfg80211, and it is different from chips. So put it into chip information. Signed-off-by: Chin-Yen Lee <[email protected]> Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
2024-03-05wifi: brcm80211: handle pmk_op allocation failureDuoming Zhou1-0/+3
The kzalloc() in brcmf_pmksa_v3_op() will return null if the physical memory has run out. As a result, if we dereference the null value, the null pointer dereference bug will happen. Return -ENOMEM from brcmf_pmksa_v3_op() if kzalloc() fails for pmk_op. Fixes: a96202acaea4 ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations") Acked-by: Arend van Spriel <[email protected]> Signed-off-by: Duoming Zhou <[email protected]> Reviewed-by: Kees Cook <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://msgid.link/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.