aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2021-04-17rtlwifi: rtl8192de: Use DEFINE_SPINLOCK() for spinlockGuobin Huang1-7/+3
spinlock can be initialized automatically with DEFINE_SPINLOCK() rather than explicitly calling spin_lock_init(). Reported-by: Hulk Robot <[email protected]> Signed-off-by: Guobin Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17qtnfmac: remove meaningless goto statement and labelswengjianfeng1-67/+0
some function's label meaningless, the label statement follows the goto statement, no other statements, so just remove it. Reported-by: kernel test robot <[email protected]> Signed-off-by: wengjianfeng <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17rtlwifi: Simplify locking of a skb list accessesChristophe JAILLET2-14/+2
The 'c2hcmd_lock' spinlock is only used to protect some __skb_queue_tail() and __skb_dequeue() calls. Use the lock provided in the skb itself and call skb_queue_tail() and skb_dequeue(). These functions already include the correct locking. Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Larry Finger <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/99cf8894fd52202cb7ce2ec6e3200eef400bc071.1617609346.git.christophe.jaillet@wanadoo.fr
2021-04-17rtlwifi: remove rtl_get_tid_hChristophe JAILLET1-6/+1
'rtl_get_tid_h()' is the same as 'ieee80211_get_tid()'. So this function can be removed to save a line of code. Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/db340a67a95c119e4f9ba8fa99aea1c73d0dcfc9.1617383263.git.christophe.jaillet@wanadoo.fr
2021-04-17rtlwifi: rtl8188ee: remove redundant assignment of variable ↵Yang Li1-2/+0
rtlpriv->btcoexist.reg_bt_sco Assigning value "3" to "rtlpriv->btcoexist.reg_bt_sco" here, but that stored value is overwritten before it can be used. Coverity reports this problem as CWE563: A value assigned to a variable is never used. drivers/net/wireless/realtek/rtlwifi/rtl8188ee/hw.c: rtl8188ee_bt_reg_init Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17rtlwifi: remove redundant assignment to variable errColin Ian King1-1/+0
Variable err is assigned -ENODEV followed by an error return path via label error_out that does not access the variable and returns with the -ENODEV error return code. The assignment to err is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17rtlwifi: Few mundane typo fixesBhaskar Chowdhury1-3/+3
s/resovle/resolve/ s/broadcase/broadcast/ s/sytem/system/ Signed-off-by: Bhaskar Chowdhury <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17qtnfmac: remove meaningless labelswengjianfeng1-21/+6
some function's label meaningless, the return statement follows the goto statement, so just remove it. Signed-off-by: wengjianfeng <[email protected]> Reviewed-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17rtlwifi: 8821ae: upgrade PHY and RF parametersPing-Ke Shih1-130/+370
The signal strength of 5G is quite low, so user can't connect to an AP far away. New parameters with new format and its parser are updated by the commit 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser."), but some parameters are missing. Use this commit to update to the novel parameters that use new format. Fixes: 84d26fda52e2 ("rtlwifi: Update 8821ae new phy parameters and its parser") Signed-off-by: Ping-Ke Shih <[email protected]> Tested-by: Kai-Heng Feng <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17cw1200: Remove unused function pointer typedef wsm_*Chen Lin1-12/+0
Remove the 'wsm_*' typedef as it is not used. Signed-off-by: Chen Lin <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17cw1200: Remove unused function pointer typedef cw1200_wsm_handlerChen Lin1-3/+0
Remove the 'cw1200_wsm_handler' typedef as it is not used. Signed-off-by: Chen Lin <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2021-04-17Merge tag 'iwlwifi-next-for-kalle-2021-04-12-v2' of ↵Kalle Valo44-541/+1102
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next iwlwifi patches for v5.13 * Add support for new FTM FW APIs; * Some CSA fixes; * Support for new HW family and other HW detection fixes; * Robustness improvement in the HW detection code; * One fix in PMF; * Some new regulatory features; * Support for passive scan in 6GHz; * Some improvements in the sync queue implementation; * Support for new devices; * Support for a new FW API command version; * Some locking fixes; * Bump the FW API version support for AX devices; * Some other small fixes, clean-ups and improvements. # gpg: Signature made Wed 14 Apr 2021 12:33:29 PM EEST using RSA key ID 1A3CC5FA # gpg: Good signature from "Luciano Roth Coelho (Luca) <[email protected]>" # gpg: aka "Luciano Roth Coelho (Intel) <[email protected]>"
2021-04-17Merge tag 'mt76-for-kvalo-2021-04-12' of https://github.com/nbd168/wirelessKalle Valo66-1298/+2243
mt76 patches for 5.13 * code cleanup * mt7915/mt7615 decap offload support * driver fixes * mt7613 eeprom support * MCU code unification * threaded NAPI support * new device IDs * mt7921 device reset support * rx timestamp support # gpg: Signature made Tue 13 Apr 2021 12:11:25 AM EEST using DSA key ID 02A76EF5 # gpg: Good signature from "Felix Fietkau <[email protected]>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
2021-04-14iwlwifi: dbg: disable ini debug in 9000 family and belowMukesh Sisodiya1-2/+3
Yoyo based debug is not applicable to old devices. As init debug is enabled by default in the driver, it needs to be disabled to work the old debug mechanism in old devices. Signed-off-by: Mukesh Sisodiya <[email protected]> Fixes: b0d8d2c27007 ("iwlwifi: yoyo: enable yoyo by default") Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.805401a1b8ec.I30db38184a418cfc1c5ca1a305cc14a52501d415@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: pcie: Change ma product string nameMatti Gottlieb3-5/+5
Change ma product string name to the correct name, and to reflect the CRF and not the CNV. Signed-off-by: Matti Gottlieb <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.c05b4c55540f.I8dd0361b033f63658999ba53640949701b048f17@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: fw: print out trigger delay when collecting dataJohannes Berg1-1/+3
It can be confusing to see "Collecting data: ..." followed by that not actually happening immediately so print out the delay in that message. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.5bd095dc579a.Id1f3b746ac61497951638ba7ce70fc4b63dd87d1@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: trans/pcie: defer transport initialisationJohannes Berg3-39/+57
In a few PCIe devices we may have to swap out the configuration after we allocate/initialise some parts of the device because we only know the correct one after reading some registers. This causes some things such as the byte-count table allocations to be incorrect, since the configuration is swapped for one with a bigger queue size. Fix this by initialising most of the transport much later, only after the configuration has finally been determined. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.8f5db97db1e4.Ic622da559b586a04ca536a0ec49ed5ecf03a9354@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: bump FW API to 63 for AX devicesLuca Coelho1-1/+1
Start supporting API version 63 for AX devices. Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.a588a9dacd98.Ie4f96b8988c2cbd5f096ee64d0eb0f4829d55aee@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: don't WARN if we can't remove a time eventEmmanuel Grumbach1-2/+2
It is not very useful to WARN if we can't send a host command The firmware is likely in a bad situation and the fact that we didn't send the host command has an impact on the firmware only, not on the driver. The driver could clean up all its state. Don't WARN in this case, but just leave a smaller note. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.0324abc169c8.I4f9b769bc38d68f8ed43f77d2cd75e8f1993e964@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: don't disconnect immediately if we don't hear beacons after CSAEmmanuel Grumbach1-1/+12
When we switch channel, we may miss a few beacons on the new channel. Don't disconnect if the time event for the switch ends before we hear the beacons. Note that this is relevant only for old devices that still use the TIME_EVENT firmware API for channel switch. The check that we hear a beacon before the time event ends was meant to be used for the association time event and not for the channel switch time event. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411132130.3d710091a0bd.I37a161ffdfb099a10080fbdc3b70a4deb76952e2@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: rs-fw: don't support stbc for HE 160Mordechay Goodstein1-12/+8
Our HE doesn't support it so never set HE 160 stbc Fixes: 3e467b8e4cf4 ("iwlwifi: rs-fw: enable STBC in he correctly") Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.550fd1903eb7.I8ddbc2f87044a5ef78d916c9c59be797811a1b7f@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: warn on SKB free w/o op-modeJohannes Berg1-1/+3
If this ever happens, and it looks like some code in PCIe is a bit broken and might lead to this, we want to know without crashing, so add a WARN_ON_ONCE(). Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.a18b7443dc55.Ia29836738acf14a55af5504aba90c6fea9fff785@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: add support for version 3 of LARI_CONFIG_CHANGE command.Miri Korenblit3-16/+29
Add support for version 3 of the LARI_CONFIG_CHANGE command. This is needed to support FW API change which is needed to support 11ax enablement in Russia. Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124418.7e68856c8a95.I83acdbe39b63c363cabc04ad42d1d0b9ce98901c@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: pcie: add ISR debug info for msix debugMordechay Goodstein2-5/+16
The debug prints help in case we get timeout on waiting for hw. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.306e2e56d3e8.I72e2977abbb1fddf23b8476bedf6a183fe969ff5@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: pcie: merge napi_poll_msix functionsMordechay Goodstein1-33/+10
The only difference between iwl_pcie_napi_poll_msix_shared() and iwl_pcie_napi_poll_msix() is when we have a shared queue and nothing in the rx queue. This case doesn't affect CPU performance, so we can merge the two functions. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9d1b61ef53a5.I60b33d5379cf7c12f1de30fc3fd4cefc38220141@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: don't lock mutex in RCU critical sectionJohannes Berg1-6/+4
We cannot lock a mutex while we're in an RCU critical section. At the same time, we're accessing data structures that are protected by the mvm->mutex anyway, so just move the entire locking here to use only that. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.4d27bd36e10e.I1fd8e8fe442c41a5deaa560452b598ed7a60ada5@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: remove PS from lower rates.Mordechay Goodstein1-4/+2
Power save (PS) should only be enabled when we reach the max phy rate. Before we reach it (MCS_9) for VHT, we should keep trying to improve the throughput. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.2a2fb9f9c25e.I7c7bbcfbdc1d35d2c3338778fb397dd5b08ea0e8@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: umac error table mismatchRoee Goldfiner3-6/+8
umac_error_table In TLV address was read using mask on MSB but on the same table in alive message it was without which caused mismatch in devices with different memory region MSB Signed-off-by: Roee Goldfiner <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.179fee442115.Ib6eabe86cfda0b6044f07c07448c366b6e07e53d@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: queue: avoid memory leak in reset flowMordechay Goodstein3-28/+9
In case the device is stopped any usage of hw queues needs to be reallocated in fw due to fw reset after device stop, so all driver internal queue should also be freed, and if we don't free the next usage would leak the old memory and get in recover flows "iwlwifi 0000:00:03.0: dma_pool_destroy iwlwifi:bc" warning. Also warn about trying to reuse an internal allocated queue. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.c72d2f0355c4.Ia3baff633b9b9109f88ab379ef0303aa152c16bf@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: don't warn if we can't wait for empty tx queuesEmmanuel Grumbach1-2/+3
If the firmware is dead, the Tx queues won't drain, but leaving a print in the log is enough, no need to WARN. If the firmware is dead, we must already have printed enough information in the log anyway. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.9a438b2320a9.I4aa897178df82acefd80173d76dd6849ad1bcdc1@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: remove remaining software checksum codeJohannes Berg2-16/+6
After the removal of the software checksum code for the A-MSDU path that we had for testing, the csum_skb variable stuck around. Remove it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.280f268ae679.Iad455b6c91e427c9f74963bbd3eb0ce743aaac53@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: remove TCM eventsEmmanuel Grumbach2-17/+2
Nobody uses that in the user space. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210411124417.b6560a5de0cd.I5dac9c60faed7f48b06d352aa2d65bcf8142c2dc@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: Use IWL_INFO in fw_reset_handshake()Ravi Darsi1-2/+2
Debug message "firmware didn't ACK the reset - continue anyway\n" in fw_reset_handshake() is classified as error, however this is not an error as it is ignored. So, change it to info message for proper classification of debug messages. Signed-off-by: Ravi Darsi <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.449b3092c330.I515edcc41913ca7fbe4a4de923671d120d5618c6@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: refactor ACPI DSM evaluation functionHarish Mitty3-83/+55
Instead of implementing the DSM evaluation function in the MVM code, refactor it so it can be generalized and part of the common ACPI implementation. Signed-off-by: Harish Mitty <[email protected]> [reworded subject and commit message] Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.a24af3551aac.I8e6bd5eb05f853b6331fa4823750f7ba8ffe46e6@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: support BIOS enable/disable for 11ax in UkraineMiri Korenblit4-0/+45
Read the new BIOS DSM and Pass to FW if to disable\enable 11ax for Ukraine according to the BIOS key. this is needed to enable OEMs to control enable/disable 11ax in Ukraine Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.055654e7707e.If7eaf9839cd5d59729a235df07e31668b408e740@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: move iwl_configure_rxq to be used by other op_modesMordechay Goodstein3-58/+63
All the op_modes need to send this command as well. Instead of duplicating the code from mvm, put the code in a common place. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.deb71fce883a.I5eef009512f180e5974f3f491ff56c763cdcc878@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: add new so-gf deviceybaruch1-1/+8
add new so-gf device to the driver. Signed-off-by: ybaruch <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d6b0c1f85a7e.I2098ca066607edc48336021ea2e5afdbf8196acf@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: enable PPAG in ChinaMiri Korenblit4-46/+65
Add support for ppag in China by reading revision 2 of the ppag table from ACPI, and passing the data to the FW. This is needed to enable OEMs to control ppag enablement in China. Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.69af388d0dce.I8cfddf9e6837bf394b00390181b4b774ded19acd@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: Add support for 6GHz passive scanIlan Peer7-0/+148
When doing scan while 6GHz channels are not enabled, the 6GHz band is not scanned. Thus, if there are no APs on the 2GHz and 5GHz bands (that will allow discovery of geographic location etc. that would allow enabling the 6GHz channels) but there are non collocated APs on 6GHz PSC channels these would never be discovered. To overcome this, FW added support for performing passive UHB scan in case no APs were discovered during scan on the 2GHz and 5GHz channels. Add support for enabling such scan when the following conditions are met: - 6GHz channels are supported but not enabled by regulatory. - Station interface is not associated or less than a defined time interval passed from the last resume or HW reset flows. - At least 4 channels are included in the scan request - The scan request includes the widlcard SSID. - At least 50 minutes passed from the last 6GHz passive scan. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.7c7bd00e0aeb.Ib226ad57e416b43a710c36a78a617d4243458b99@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: add ax201 killer deviceybaruch3-0/+8
add new killer devices configurations. Signed-off-by: ybaruch <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.54967363d26d.I5d1a3d810cf6abace51ebb2630d62d891e9fd302@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: when associated with PMF, use protected NDP ranging negotiationAvraham Stern1-0/+9
When associated to the resonder with PMF, request to protect the NDP ranging negotiation with PMF. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.e7982c72e12b.Ib6db362d01a31132c638e194d49476cd8e3ff430@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: clean up queue sync implementationJohannes Berg6-108/+80
When we do queue sync, it's confusing that we have the structures declared in the FW API header files that aren't really firmware, and the union is also confusing - especially now in the code that checks the size on the return. So rework this: change the type of sync and whether to do it in a synchronous fashion to arguments, and build the data structure in the function, so we don't need the union. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.f62833fd9893.I612d7ac1c655ec4880329360e15d207698c750bc@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: write queue_sync_state only for syncJohannes Berg1-2/+3
We use mvm->queue_sync_state to wait for synchronous queue sync messages, but if an async one happens inbetween we shouldn't clear mvm->queue_sync_state after sending the async one, that can run concurrently (at least from the CPU POV) with another synchronous queue sync. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210331121101.d11c9bcdb4aa.I0772171dbaec87433a11513e9586d98b5d920b5f@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: responder: support responder config command version 8Avraham Stern3-6/+90
Version 8 add NDP ranging parameters configuration, as well as enable/disable NDP ranging and LMR feedback. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.ce9570d755d3.Ic81cb8da9aecbbc9edff468cb4ffbb741418cc73@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: mvm: support range request command version 12Avraham Stern3-3/+186
Version 12 adds configuration of NDP ranging parameters: - max number of LTF repetitions - max number of spatial streams - max total LTFs Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.2c30c376c5cf.I01460f7277594ee7c98a8e1fe5447c59e70bf073@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: pcie: make cfg vs. trans_cfg more robustJohannes Berg1-7/+28
If we (for example) have a trans_cfg entry in the PCI IDs table, but then don't find a full cfg entry for it in the info table, we fall through to the code that treats the PCI ID table entry as a full cfg entry. This obviously causes crashes later, e.g. when trying to build the firmware name string. Avoid such crashes by using the low bit of the pointer as a tag for trans_cfg entries (automatically using a macro that checks the type when assigning) and then checking that before trying to use the data as a full entry - if it's just a partial entry at that point, fail. Since we're adding some macro magic, also check that the type is in fact either struct iwl_cfg_trans_params or struct iwl_cfg, failing compilation ("initializer element is not constant") if it isn't. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.6f69fe6e4128.I921d4ae20ef5276716baeeeda0b001cf25b9b968@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: pcie: clear only FH bits handle in the interruptMordechay Goodstein2-1/+11
For simplicity we assume that msix has 2 IRQ lines one used for rx data called msix_non_share, and another used for one bit flags messages (alive, hw error, sw error, rx data flag) called msix_share. Every time the FW has data to send it puts it on the RX queue and HW turns on the flags in msix_share (inta_fw) indicating about rx data, and HW sends an interrupt a bit later to the msix_non_share _unless_ the msix_shared RX data bit was cleared. Currently in the code every time we get an msix_shared we clear all bits including rx data queue bits. So we can have a race ---------------------------------------------------- DRIVER | HW | FW ---------------------------------------------------- - send host cmd to FW | | | | - handle message | | and put a response | | on the RX queue | - RX flag on | | | - send alive msix | - alive flag on | | - interrupt | | msix_share driver | - handle msix_shared | | and clear all flags | | bits | | | - don't send an | | interrupt on | | msix_non_shared | | (driver cleared) | - driver timeout on | | waiting for host cmd | | respond | | | | ---------------------------------------------------- The change is to clear only the msi_shared flags that are handled in the msix_shared flow, which will cause the hardware to send an interrupt on the msix_non_share line as well, when it has data. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.a1cdda2fa270.I02a82312679f4541f30bb8db8747a797dbb70ee7@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: add 160Mhz to killer 1550 nameybaruch1-1/+1
change the name of 1550 killer device to 160Mhz. Signed-off-by: ybaruch <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.b87618a26ff8.Icf1d9c150ec108f30ce0e72c18b9350da6ae5087@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: change name to AX 211 and 411 familyybaruch1-2/+2
change the name of the ax211 and ax411. Signed-off-by: ybaruch <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.fc3218805052.I203f1a802338f59955bd511c90217f63b918390b@changeid Signed-off-by: Luca Coelho <[email protected]>
2021-04-14iwlwifi: change step in so-gf structybaruch3-3/+3
change the step of iwlax210_2ax_cfg_so_jf_a0 to iwlax210_2ax_cfg_so_jf_b0 as it is on the wcd_fw-dev repository. Signed-off-by: ybaruch <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20210330162204.e9a9d1da76bc.Ie964f37872bbb88d1a02094134f9a2c38faad884@changeid Signed-off-by: Luca Coelho <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.