aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2019-04-18rtlwifi: rtl8188ee: Remove extraneous fileLarry Finger1-10/+0
Somehow file drivers/net/wireless/realtek/rtlwifi/rtl8188ee/trx.c.rej was incorporated into the sources. Obviously, it can be removed. Signed-off-by: Larry Finger <[email protected]> Reported-by: Andrew Morton <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-18iwlwifi: cfg: use family 22560 based_params for AX210 familyShaul Triebitz1-1/+1
Specifically, max_tfd_queue_size should be 0x10000 like in 22560 family and not 0x100 like in 22000 family. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-18iwlwifi: mvm: properly check debugfs dentry before using itGreg Kroah-Hartman1-0/+5
debugfs can now report an error code if something went wrong instead of just NULL. So if the return value is to be used as a "real" dentry, it needs to be checked if it is an error before dereferencing it. This is now happening because of ff9fb72bc077 ("debugfs: return error values, not NULL"). If multiple iwlwifi devices are in the system, this can cause problems when the driver attempts to create the main debugfs directory again. Later on in the code we fail horribly by trying to dereference a pointer that is an error value. Reported-by: Laura Abbott <[email protected]> Reported-by: Gabriel Ramirez <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Emmanuel Grumbach <[email protected]> Cc: Luca Coelho <[email protected]> Cc: Intel Linux Wireless <[email protected]> Cc: Kalle Valo <[email protected]> Cc: stable <[email protected]> # 5.0 Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-18iwlwifi: dbg_ini: check debug TLV type explicitlyShahar S Matityahu2-7/+11
In ini debug TLVs bit 24 is set. The driver relies on it in the memory allocation for the debug configuration. This implementation is problematic in case of a new debug TLV that is not supported yet is added and uses bit 24. In such a scenario the driver allocate space without using it which causes errors in the apply point enabling flow. Solve it by explicitly checking if a given TLV is part of the list of the supported ini debug TLVs. Signed-off-by: Shahar S Matityahu <[email protected]> Fixes: f14cda6f3b31 ("iwlwifi: trans: parse and store debug ini TLVs") Signed-off-by: Luca Coelho <[email protected]>
2019-04-18iwlwifi: mvm: don't attempt debug collection in rfkillJohannes Berg2-2/+4
If we fail to initialize because rfkill is enabled, then trying to do debug collection currently just fails. Prevent that in the high-level code, although we should probably also fix the lower level code to do things more carefully. It's not 100% clear that it fixes this commit, as the original dump code at the time might've been more careful. In any case, we don't really need to dump anything in this expected scenario. Signed-off-by: Johannes Berg <[email protected]> Fixes: 7125648074e8 ("iwlwifi: add fw dump upon RT ucode start failure") Signed-off-by: Luca Coelho <[email protected]>
2019-04-18iwlwifi: don't panic in error path on non-msix systemsShahar S Matityahu1-6/+13
The driver uses msix causes-register to handle both msix and non msix interrupts when performing sync nmi. On devices that do not support msix this register is unmapped and accessing it causes a kernel panic. Solve this by differentiating the two cases and accessing the proper causes-register in each case. Reported-by: Michal Hocko <[email protected]> Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller27-223/+145
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <[email protected]>
2019-04-15Merge tag 'wireless-drivers-for-davem-2019-04-15' of ↵David S. Miller23-215/+123
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.1 Second set of fixes for 5.1. iwlwifi * add some new PCI IDs (plus a struct name change they depend on) * fix crypto with new devices, namely 22560 and above * fix for a potential deadlock in the TX path * a fix for offloaded rate-control * support new PCI HW IDs which use a new FW mt76 * fix lock initialisation and a possible deadlock * aggregation fixes rt2x00 * fix sequence numbering during retransmits ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-13rtlwifi: rtl8723ae: Make rtl8723e_dm_refresh_rate_adaptive_mask staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/dm.c:666:6: warning: symbol 'rtl8723e_dm_refresh_rate_adaptive_mask' was not declared. Should it be static? Signed-off-by: YueHaibing <[email protected]> Acked-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-13rtlwifi: Convert the wake_match variable to localLarry Finger6-28/+39
In five of the drivers, the contents of bits 29-31 of one of the RX descriptors is used to set bits in a variable that is used to save the wakeup condition for output in a debugging statement. The resulting variable is not used anywhere else even though it is stored in a struct and could be available in other routines. This variable is changed to be local. Signed-off-by: Larry Finger <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-13rtlwifi: Fix duplicate tests of one of the RX descriptorsLarry Finger3-3/+3
In drivers rtl8188ee, rtl8821ae, rtl8723be, and rtl8192ee, the reason for a wake-up is returned in the fourth RX descriptor in bits 29-31. Due to typographical errors, all but rtl8821ae test bit 31 twice and fail to test bit 29. This error causes no problems as the tests are only used to set bits in the output of an optional debugging statement. Signed-off-by: Larry Finger <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-13brcmfmac: fix leak of mypkt on error return pathColin Ian King1-5/+3
Currently if the call to brcmf_sdiod_set_backplane_window fails then error return path leaks mypkt. Fix this by returning by a new error path labelled 'out' that calls brcmu_pkt_buf_free_skb to free mypkt. Also remove redundant check on err before calling brcmf_sdiod_skbuff_write. Addresses-Coverity: ("Resource Leak") Fixes: a7c3aa1509e2 ("brcmfmac: Remove brcmf_sdiod_addrprep()") Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-13brcmfmac: Loading the correct firmware for brcm43456Ondrej Jirman1-1/+3
SDIO based brcm43456 is currently misdetected as brcm43455 and the wrong firmware name is used. Correct the detection and load the correct firmware file. Chiprev for brcm43456 is "9". Signed-off-by: Ondrej Jirman <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-13brcmfmac: Use struct_size() in kzalloc()Gustavo A. R. Silva1-3/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Notice that, in this case, variable reqsz is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-13Merge tag 'iwlwifi-next-for-kalle-2019-04-03' of ↵Kalle Valo25-263/+403
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Second batch of patches intended for v5.2 * Work on the new debugging infra continues; * Fixes for the 22000 series; * Support for some new FW API changes; * Work on new hardware continues; * Some debugfs cleanups by Greg-KH; * General bugfixes; * Other cleanups;
2019-04-12Merge tag 'iwlwifi-for-kalle-2019-04-03' of ↵Kalle Valo6-2/+31
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Second batch of iwlwifi fixes intended for v5.1 * fix for a potential deadlock in the TX path; * a fix for offloaded rate-control; * support new PCI HW IDs which use a new FW;
2019-04-12mt76x02: avoid status_list.lock and sta->rate_ctrl_lock dependencyStanislaw Gruszka1-6/+8
Move ieee80211_tx_status_ext() outside of status_list lock section in order to avoid locking dependency and possible deadlock reposed by LOCKDEP in below warning. Also do mt76_tx_status_lock() just before it's needed. [ 440.224832] WARNING: possible circular locking dependency detected [ 440.224833] 5.1.0-rc2+ #22 Not tainted [ 440.224834] ------------------------------------------------------ [ 440.224835] kworker/u16:28/2362 is trying to acquire lock: [ 440.224836] 0000000089b8cacf (&(&q->lock)->rlock#2){+.-.}, at: mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.224842] but task is already holding lock: [ 440.224842] 000000002cfedc59 (&(&sta->lock)->rlock){+.-.}, at: ieee80211_stop_tx_ba_cb+0x32/0x1f0 [mac80211] [ 440.224863] which lock already depends on the new lock. [ 440.224863] the existing dependency chain (in reverse order) is: [ 440.224864] -> #3 (&(&sta->lock)->rlock){+.-.}: [ 440.224869] _raw_spin_lock_bh+0x34/0x40 [ 440.224880] ieee80211_start_tx_ba_session+0xe4/0x3d0 [mac80211] [ 440.224894] minstrel_ht_get_rate+0x45c/0x510 [mac80211] [ 440.224906] rate_control_get_rate+0xc1/0x140 [mac80211] [ 440.224918] ieee80211_tx_h_rate_ctrl+0x195/0x3c0 [mac80211] [ 440.224930] ieee80211_xmit_fast+0x26d/0xa50 [mac80211] [ 440.224942] __ieee80211_subif_start_xmit+0xfc/0x310 [mac80211] [ 440.224954] ieee80211_subif_start_xmit+0x38/0x390 [mac80211] [ 440.224956] dev_hard_start_xmit+0xb8/0x300 [ 440.224957] __dev_queue_xmit+0x7d4/0xbb0 [ 440.224968] ip6_finish_output2+0x246/0x860 [ipv6] [ 440.224978] mld_sendpack+0x1bd/0x360 [ipv6] [ 440.224987] mld_ifc_timer_expire+0x1a4/0x2f0 [ipv6] [ 440.224989] call_timer_fn+0x89/0x2a0 [ 440.224990] run_timer_softirq+0x1bd/0x4d0 [ 440.224992] __do_softirq+0xdb/0x47c [ 440.224994] irq_exit+0xfa/0x100 [ 440.224996] smp_apic_timer_interrupt+0x9a/0x220 [ 440.224997] apic_timer_interrupt+0xf/0x20 [ 440.224999] cpuidle_enter_state+0xc1/0x470 [ 440.225000] do_idle+0x21a/0x260 [ 440.225001] cpu_startup_entry+0x19/0x20 [ 440.225004] start_secondary+0x135/0x170 [ 440.225006] secondary_startup_64+0xa4/0xb0 [ 440.225007] -> #2 (&(&sta->rate_ctrl_lock)->rlock){+.-.}: [ 440.225009] _raw_spin_lock_bh+0x34/0x40 [ 440.225022] rate_control_tx_status+0x4f/0xb0 [mac80211] [ 440.225031] ieee80211_tx_status_ext+0x142/0x1a0 [mac80211] [ 440.225035] mt76x02_send_tx_status+0x2e4/0x340 [mt76x02_lib] [ 440.225037] mt76x02_tx_status_data+0x31/0x40 [mt76x02_lib] [ 440.225040] mt76u_tx_status_data+0x51/0xa0 [mt76_usb] [ 440.225042] process_one_work+0x237/0x5d0 [ 440.225043] worker_thread+0x3c/0x390 [ 440.225045] kthread+0x11d/0x140 [ 440.225046] ret_from_fork+0x3a/0x50 [ 440.225047] -> #1 (&(&list->lock)->rlock#8){+.-.}: [ 440.225049] _raw_spin_lock_bh+0x34/0x40 [ 440.225052] mt76_tx_status_skb_add+0x51/0x100 [mt76] [ 440.225054] mt76x02u_tx_prepare_skb+0xbd/0x116 [mt76x02_usb] [ 440.225056] mt76u_tx_queue_skb+0x5f/0x180 [mt76_usb] [ 440.225058] mt76_tx+0x93/0x190 [mt76] [ 440.225070] ieee80211_tx_frags+0x148/0x210 [mac80211] [ 440.225081] __ieee80211_tx+0x75/0x1b0 [mac80211] [ 440.225092] ieee80211_tx+0xde/0x110 [mac80211] [ 440.225105] __ieee80211_tx_skb_tid_band+0x72/0x90 [mac80211] [ 440.225122] ieee80211_send_auth+0x1f3/0x360 [mac80211] [ 440.225141] ieee80211_auth.cold.40+0x6c/0x100 [mac80211] [ 440.225156] ieee80211_mgd_auth.cold.50+0x132/0x15f [mac80211] [ 440.225171] cfg80211_mlme_auth+0x149/0x360 [cfg80211] [ 440.225181] nl80211_authenticate+0x273/0x2e0 [cfg80211] [ 440.225183] genl_family_rcv_msg+0x196/0x3a0 [ 440.225184] genl_rcv_msg+0x47/0x8e [ 440.225185] netlink_rcv_skb+0x3a/0xf0 [ 440.225187] genl_rcv+0x24/0x40 [ 440.225188] netlink_unicast+0x16d/0x210 [ 440.225189] netlink_sendmsg+0x204/0x3b0 [ 440.225191] sock_sendmsg+0x36/0x40 [ 440.225193] ___sys_sendmsg+0x259/0x2b0 [ 440.225194] __sys_sendmsg+0x47/0x80 [ 440.225196] do_syscall_64+0x60/0x1f0 [ 440.225197] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 440.225198] -> #0 (&(&q->lock)->rlock#2){+.-.}: [ 440.225200] lock_acquire+0xb9/0x1a0 [ 440.225202] _raw_spin_lock_bh+0x34/0x40 [ 440.225204] mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.225215] ieee80211_agg_start_txq+0xe8/0x2b0 [mac80211] [ 440.225225] ieee80211_stop_tx_ba_cb+0xb8/0x1f0 [mac80211] [ 440.225235] ieee80211_ba_session_work+0x1c1/0x2f0 [mac80211] [ 440.225236] process_one_work+0x237/0x5d0 [ 440.225237] worker_thread+0x3c/0x390 [ 440.225239] kthread+0x11d/0x140 [ 440.225240] ret_from_fork+0x3a/0x50 [ 440.225240] other info that might help us debug this: [ 440.225241] Chain exists of: &(&q->lock)->rlock#2 --> &(&sta->rate_ctrl_lock)->rlock --> &(&sta->lock)->rlock [ 440.225243] Possible unsafe locking scenario: [ 440.225244] CPU0 CPU1 [ 440.225244] ---- ---- [ 440.225245] lock(&(&sta->lock)->rlock); [ 440.225245] lock(&(&sta->rate_ctrl_lock)->rlock); [ 440.225246] lock(&(&sta->lock)->rlock); [ 440.225247] lock(&(&q->lock)->rlock#2); [ 440.225248] *** DEADLOCK *** [ 440.225249] 5 locks held by kworker/u16:28/2362: [ 440.225250] #0: 0000000048fcd291 ((wq_completion)phy0){+.+.}, at: process_one_work+0x1b5/0x5d0 [ 440.225252] #1: 00000000f1c6828f ((work_completion)(&sta->ampdu_mlme.work)){+.+.}, at: process_one_work+0x1b5/0x5d0 [ 440.225254] #2: 00000000433d2b2c (&sta->ampdu_mlme.mtx){+.+.}, at: ieee80211_ba_session_work+0x5c/0x2f0 [mac80211] [ 440.225265] #3: 000000002cfedc59 (&(&sta->lock)->rlock){+.-.}, at: ieee80211_stop_tx_ba_cb+0x32/0x1f0 [mac80211] [ 440.225276] #4: 000000009d7b9a44 (rcu_read_lock){....}, at: ieee80211_agg_start_txq+0x33/0x2b0 [mac80211] [ 440.225286] stack backtrace: [ 440.225288] CPU: 2 PID: 2362 Comm: kworker/u16:28 Not tainted 5.1.0-rc2+ #22 [ 440.225289] Hardware name: LENOVO 20KGS23S0P/20KGS23S0P, BIOS N23ET55W (1.30 ) 08/31/2018 [ 440.225300] Workqueue: phy0 ieee80211_ba_session_work [mac80211] [ 440.225301] Call Trace: [ 440.225304] dump_stack+0x85/0xc0 [ 440.225306] print_circular_bug.isra.38.cold.58+0x15c/0x195 [ 440.225307] check_prev_add.constprop.48+0x5f0/0xc00 [ 440.225309] ? check_prev_add.constprop.48+0x39d/0xc00 [ 440.225311] ? __lock_acquire+0x41d/0x1100 [ 440.225312] __lock_acquire+0xd98/0x1100 [ 440.225313] ? __lock_acquire+0x41d/0x1100 [ 440.225315] lock_acquire+0xb9/0x1a0 [ 440.225317] ? mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.225319] _raw_spin_lock_bh+0x34/0x40 [ 440.225321] ? mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.225323] mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.225334] ieee80211_agg_start_txq+0xe8/0x2b0 [mac80211] [ 440.225344] ieee80211_stop_tx_ba_cb+0xb8/0x1f0 [mac80211] [ 440.225354] ieee80211_ba_session_work+0x1c1/0x2f0 [mac80211] [ 440.225356] process_one_work+0x237/0x5d0 [ 440.225358] worker_thread+0x3c/0x390 [ 440.225359] ? wq_calc_node_cpumask+0x70/0x70 [ 440.225360] kthread+0x11d/0x140 [ 440.225362] ? kthread_create_on_node+0x40/0x40 [ 440.225363] ret_from_fork+0x3a/0x50 Cc: [email protected] Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb") Signed-off-by: Stanislaw Gruszka <[email protected]> Acked-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-12rt2x00: do not increment sequence number while re-transmittingVijayakumar Durai3-17/+9
Currently rt2x00 devices retransmit the management frames with incremented sequence number if hardware is assigning the sequence. This is HW bug fixed already for non-QOS data frames, but it should be fixed for management frames except beacon. Without fix retransmitted frames have wrong SN: AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1648, FN=0, Flags=........C Frame is not being retransmitted 1648 1 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1649, FN=0, Flags=....R...C Frame is being retransmitted 1649 1 AlphaNet_e8:fb:36 Vivotek_52:31:51 Authentication, SN=1650, FN=0, Flags=....R...C Frame is being retransmitted 1650 1 With the fix SN stays correctly the same: 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=........C 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C 88:6a:e3:e8:f9:a2 8c:f5:a3:88:76:87 Authentication, SN=1450, FN=0, Flags=....R...C Cc: [email protected] Signed-off-by: Vijayakumar Durai <[email protected]> [sgruszka: simplify code, change comments and changelog] Signed-off-by: Stanislaw Gruszka <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-12mt76: mt7603: send BAR after powersave wakeupFelix Fietkau1-1/+1
Now that the sequence number allocation is fixed, we can finally send a BAR at powersave wakeup time to refresh the receiver side reorder window Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-12mt76: mt7603: fix sequence number assignmentFelix Fietkau3-43/+18
If the MT_TXD3_SN_VALID flag is not set in the tx descriptor, the hardware assigns the sequence number. However, the rest of the code assumes that the sequence number specified in the 802.11 header gets transmitted. This was causing issues with the aggregation setup, which worked for the initial one (where the sequence numbers were still close), but not for further teardown/re-establishing of sessions. Additionally, the overwrite of the TID sequence number in WTBL2 was resetting the hardware assigned sequence numbers, causing them to drift further apart. Fix this by using the software assigned sequence numbers Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-12mt76: mt7603: add missing initialization for dev->ps_lockFelix Fietkau1-0/+2
Fixes lockdep complaint and a potential race condition Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-08mac80211: make ieee80211_schedule_txq schedule empty TXQsFelix Fietkau3-4/+7
Currently there is no way for the driver to signal to mac80211 that it should schedule a TXQ even if there are no packets on the mac80211 part of that queue. This is problematic if the driver has an internal retry queue to deal with software A-MPDU retry. This patch changes the behavior of ieee80211_schedule_txq to always schedule the queue, as its only user (ath9k) seems to expect such behavior already: it calls this function on tx status and on powersave wakeup whenever its internal retry queue is not empty. Also add an extra argument to ieee80211_return_txq to get the same behavior. This fixes an issue on ath9k where tx queues with packets to retry (and no new packets in mac80211) would not get serviced. Fixes: 89cea7493a346 ("ath9k: Switch to mac80211 TXQ scheduling and airtime APIs") Signed-off-by: Felix Fietkau <[email protected]> Acked-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2019-04-08mac80211_hwsim: calculate if_combination.max_interfacesJohannes Berg1-4/+15
If we just set this to 2048, and have multiple limits you can select from, the total number might run over and cause a warning in cfg80211. This doesn't make sense, so we just calculate the total max_interfaces now. Reported-by: [email protected] Fixes: 99e3a44bac37 ("mac80211_hwsim: allow setting iftype support") Signed-off-by: Johannes Berg <[email protected]>
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon12-51/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-04-04qtnfmac: replace qtnf_cmd_acl_data_size() with struct_size()Gustavo A. R. Silva1-11/+4
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL) Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: size = struct_size(instance, entry, count); or instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL) Based on the above, replace qtnf_cmd_acl_data_size() with the new struct_size() helper. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04rtlwifi: move spin_lock_bh to spin_lock in taskletJeff Xie1-3/+3
It is unnecessary to call spin_lock_bh in a tasklet. Signed-off-by: Jeff Xie <[email protected]> Acked-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04rtlwifi: fix potential NULL pointer dereferencePing-Ke Shih6-0/+14
In case dev_alloc_skb fails, the fix safely returns to avoid potential NULL pointer dereference. Signed-off-by: Ping-Ke Shih <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04rtlwifi: fix a potential NULL pointer dereferenceKangjie Lu1-0/+5
In case alloc_workqueue fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04mwifiex: add a bounds check in mwifiex_process_sta_rx_packet()Dan Carpenter1-1/+2
Smatch complains that "local_rx_pd->priority" can't be trusted because it comes from skb->data and it can go up to 255 instead of being capped in the 0-7 range. A few lines earlier, on the other side of the if statement, we cap priority so it seems harmless to add a bounds check here as well. Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04mwifiex: Fix mem leak in mwifiex_tm_cmdYueHaibing1-1/+5
'hostcmd' is alloced by kzalloc, should be freed before leaving from the error handling cases, otherwise it will cause mem leak. Fixes: 3935ccc14d2c ("mwifiex: add cfg80211 testmode support") Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04net: mwifiex: fix a NULL pointer dereferenceKangjie Lu1-0/+6
In case dev_alloc_skb fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04iwlegacy: remove redundant assignment to *resColin Ian King1-1/+0
Currently 1 is being assigned to *res and then it is immediately updated with the computed result. The first assignment is redundant and can be removed. Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Mukesh Ojha <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04b43: shut up clang -Wuninitialized variable warningArnd Bergmann1-3/+3
Clang warns about what is clearly a case of passing an uninitalized variable into a static function: drivers/net/wireless/broadcom/b43/phy_lp.c:1852:23: error: variable 'gains' is uninitialized when used here [-Werror,-Wuninitialized] lpphy_papd_cal(dev, gains, 0, 1, 30); ^~~~~ drivers/net/wireless/broadcom/b43/phy_lp.c:1838:2: note: variable 'gains' is declared here struct lpphy_tx_gains gains, oldgains; ^ 1 error generated. However, this function is empty, and its arguments are never evaluated, so gcc in contrast does not warn here. Both compilers behave in a reasonable way as far as I can tell, so we should change the code to avoid the warning everywhere. We could just eliminate the lpphy_papd_cal() function entirely, given that it has had the TODO comment in it for 10 years now and is rather unlikely to ever get done. I'm doing a simpler change here, and just pass the 'oldgains' variable in that has been initialized, based on the guess that this is what was originally meant. Fixes: 2c0d6100da3e ("b43: LP-PHY: Begin implementing calibration & software RFKILL support") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Larry Finger <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: fix missing checks for kmemdupKangjie Lu1-0/+4
In case kmemdup fails, the fix sets conn_info->req_ie_len and conn_info->resp_ie_len to zero to avoid buffer overflows. Signed-off-by: Kangjie Lu <[email protected]> Acked-by: Arend van Spriel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: convert dev_init_lock mutex to completionPiotr Figiel1-9/+8
Leaving dev_init_lock mutex locked in probe causes BUG and a WARNING when kernel is compiled with CONFIG_PROVE_LOCKING. Convert mutex to completion which silences those warnings and improves code readability. Fix below errors when connecting the USB WiFi dongle: brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43143 for chip BCM43143/2 BUG: workqueue leaked lock or atomic: kworker/0:2/0x00000000/434 last function: hub_event 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: usb_hub_wq hub_event [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<8014195c>] (process_one_work+0x710/0x808) [<8014195c>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ====================================================== WARNING: possible circular locking dependency detected 4.19.23-00084-g454a789-dirty #123 Not tainted ------------------------------------------------------ kworker/0:2/434 is trying to acquire lock: e29cf799 ((wq_completion)"events"){+.+.}, at: process_one_work+0x174/0x808 but task is already holding lock: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&devinfo->dev_init_lock){+.+.}: mutex_lock_nested+0x1c/0x24 brcmf_usb_probe+0x78/0x550 [brcmfmac] usb_probe_interface+0xc0/0x1bc really_probe+0x228/0x2c0 __driver_attach+0xe4/0xe8 bus_for_each_dev+0x68/0xb4 bus_add_driver+0x19c/0x214 driver_register+0x78/0x110 usb_register_driver+0x84/0x148 process_one_work+0x228/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #1 (brcmf_driver_work){+.+.}: worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) -> #0 ((wq_completion)"events"){+.+.}: process_one_work+0x1b8/0x808 worker_thread+0x2c/0x564 kthread+0x13c/0x16c ret_from_fork+0x14/0x20 (null) other info that might help us debug this: Chain exists of: (wq_completion)"events" --> brcmf_driver_work --> &devinfo->dev_init_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&devinfo->dev_init_lock); lock(brcmf_driver_work); lock(&devinfo->dev_init_lock); lock((wq_completion)"events"); *** DEADLOCK *** 1 lock held by kworker/0:2/434: #0: 18d5dcdf (&devinfo->dev_init_lock){+.+.}, at: brcmf_usb_probe+0x78/0x550 [brcmfmac] stack backtrace: CPU: 0 PID: 434 Comm: kworker/0:2 Not tainted 4.19.23-00084-g454a789-dirty #123 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events request_firmware_work_func [<8011237c>] (unwind_backtrace) from [<8010d74c>] (show_stack+0x10/0x14) [<8010d74c>] (show_stack) from [<809c4324>] (dump_stack+0xa8/0xd4) [<809c4324>] (dump_stack) from [<80172838>] (print_circular_bug+0x210/0x330) [<80172838>] (print_circular_bug) from [<80175940>] (__lock_acquire+0x160c/0x1a30) [<80175940>] (__lock_acquire) from [<8017671c>] (lock_acquire+0xe0/0x268) [<8017671c>] (lock_acquire) from [<80141404>] (process_one_work+0x1b8/0x808) [<80141404>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xed1d9fb0 to 0xed1d9ff8) 9fa0: 00000000 00000000 00000000 00000000 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Signed-off-by: Piotr Figiel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: fix Oops when bringing up interface during USB disconnectPiotr Figiel1-3/+7
Fix a race which leads to an Oops with NULL pointer dereference. The dereference is in brcmf_config_dongle() when cfg_to_ndev() attempts to get net_device structure of interface with index 0 via if2bss mapping. This shouldn't fail because of check for bus being ready in brcmf_netdev_open(), but it's not synchronised with USB disconnect and there is a race: after the check the bus can be marked down and the mapping for interface 0 may be gone. Solve this by modifying disconnect handling so that the removal of mapping of ifidx to brcmf_if structure happens after netdev removal (which is synchronous with brcmf_netdev_open() thanks to rtln being locked in devinet_ioctl()). This assures brcmf_netdev_open() returns before the mapping is removed during disconnect. Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = bcae2612 [00000008] *pgd=8be73831 Internal error: Oops: 17 [#1] PREEMPT SMP ARM Modules linked in: brcmfmac brcmutil nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether usb_serial_simple usbserial cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc usbmisc_imx ulpi 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core [last unloaded: brcmutil] CPU: 2 PID: 24478 Comm: ifconfig Not tainted 4.19.23-00078-ga62866d-dirty #115 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) PC is at brcmf_cfg80211_up+0x94/0x29c [brcmfmac] LR is at brcmf_cfg80211_up+0x8c/0x29c [brcmfmac] pc : [<7f26a91c>] lr : [<7f26a914>] psr: a0070013 sp : eca99d28 ip : 00000000 fp : ee9c6c00 r10: 00000036 r9 : 00000000 r8 : ece4002c r7 : edb5b800 r6 : 00000000 r5 : 80f08448 r4 : edb5b968 r3 : ffffffff r2 : 00000000 r1 : 00000002 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 7ca0c04a DAC: 00000051 Process ifconfig (pid: 24478, stack limit = 0xd9e85a0e) Stack: (0xeca99d28 to 0xeca9a000) 9d20: 00000000 80f873b0 0000000d 80f08448 eca99d68 50d45f32 9d40: 7f27de94 ece40000 80f08448 80f08448 7f27de94 ece4002c 00000000 00000036 9d60: ee9c6c00 7f27262c 00001002 50d45f32 ece40000 00000000 80f08448 80772008 9d80: 00000001 00001043 00001002 ece40000 00000000 50d45f32 ece40000 00000001 9da0: 80f08448 00001043 00001002 807723d0 00000000 50d45f32 80f08448 eca99e58 9dc0: 80f87113 50d45f32 80f08448 ece40000 ece40138 00001002 80f08448 00000000 9de0: 00000000 80772434 edbd5380 eca99e58 edbd5380 80f08448 ee9c6c0c 80805f70 9e00: 00000000 ede08e00 00008914 ece40000 00000014 ee9c6c0c 600c0013 00001043 9e20: 0208a8c0 ffffffff 00000000 50d45f32 eca98000 80f08448 7ee9fc38 00008914 9e40: 80f68e40 00000051 eca98000 00000036 00000003 80808b9c 6e616c77 00000030 9e60: 00000000 00000000 00001043 0208a8c0 ffffffff 00000000 80f08448 00000000 9e80: 00000000 816d8b20 600c0013 00000001 ede09320 801763d4 00000000 50d45f32 9ea0: eca98000 80f08448 7ee9fc38 50d45f32 00008914 80f08448 7ee9fc38 80f68e40 9ec0: ed531540 8074721c 00000800 00000001 00000000 6e616c77 00000030 00000000 9ee0: 00000000 00001002 0208a8c0 ffffffff 00000000 50d45f32 80f08448 7ee9fc38 9f00: ed531560 ec8fc900 80285a6c 80285138 edb910c0 00000000 ecd91008 ede08e00 9f20: 80f08448 00000000 00000000 816d8b20 600c0013 00000001 ede09320 801763d4 9f40: 00000000 50d45f32 00021000 edb91118 edb910c0 80f08448 01b29000 edb91118 9f60: eca99f7c 50d45f32 00021000 ec8fc900 00000003 ec8fc900 00008914 7ee9fc38 9f80: eca98000 00000036 00000003 80285a6c 00086364 7ee9fe1c 000000c3 00000036 9fa0: 801011c4 80101000 00086364 7ee9fe1c 00000003 00008914 7ee9fc38 00086364 9fc0: 00086364 7ee9fe1c 000000c3 00000036 0008630c 7ee9fe1c 7ee9fc38 00000003 9fe0: 000a42b8 7ee9fbd4 00019914 76e09acc 600c0010 00000003 00000000 00000000 [<7f26a91c>] (brcmf_cfg80211_up [brcmfmac]) from [<7f27262c>] (brcmf_netdev_open+0x74/0xe8 [brcmfmac]) [<7f27262c>] (brcmf_netdev_open [brcmfmac]) from [<80772008>] (__dev_open+0xcc/0x150) [<80772008>] (__dev_open) from [<807723d0>] (__dev_change_flags+0x168/0x1b4) [<807723d0>] (__dev_change_flags) from [<80772434>] (dev_change_flags+0x18/0x48) [<80772434>] (dev_change_flags) from [<80805f70>] (devinet_ioctl+0x67c/0x79c) [<80805f70>] (devinet_ioctl) from [<80808b9c>] (inet_ioctl+0x210/0x3d4) [<80808b9c>] (inet_ioctl) from [<8074721c>] (sock_ioctl+0x350/0x524) [<8074721c>] (sock_ioctl) from [<80285138>] (do_vfs_ioctl+0xb0/0x9b0) [<80285138>] (do_vfs_ioctl) from [<80285a6c>] (ksys_ioctl+0x34/0x5c) [<80285a6c>] (ksys_ioctl) from [<80101000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xeca99fa8 to 0xeca99ff0) 9fa0: 00086364 7ee9fe1c 00000003 00008914 7ee9fc38 00086364 9fc0: 00086364 7ee9fe1c 000000c3 00000036 0008630c 7ee9fe1c 7ee9fc38 00000003 9fe0: 000a42b8 7ee9fbd4 00019914 76e09acc Code: e5970328 eb002021 e1a02006 e3a01002 (e5909008) ---[ end trace 5cbac2333f3ac5df ]--- Signed-off-by: Piotr Figiel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: remove unused variable i from brcmf_usb_free_qPiotr Figiel1-2/+0
Variable i is not used so remove it. Signed-off-by: Piotr Figiel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: remove pending parameter from brcmf_usb_free_qPiotr Figiel1-9/+6
brcmf_usb_free_q is no longer called with pending=true thus this boolean parameter is no longer needed. Signed-off-by: Piotr Figiel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: fix race during disconnect when USB completion is in progressPiotr Figiel1-2/+8
It was observed that rarely during USB disconnect happening shortly after connect (before full initialization completes) usb_hub_wq would wait forever for the dev_init_lock to be unlocked. dev_init_lock would remain locked though because of infinite wait during usb_kill_urb: [ 2730.656472] kworker/0:2 D 0 260 2 0x00000000 [ 2730.660700] Workqueue: events request_firmware_work_func [ 2730.664807] [<809dca20>] (__schedule) from [<809dd164>] (schedule+0x4c/0xac) [ 2730.670587] [<809dd164>] (schedule) from [<8069af44>] (usb_kill_urb+0xdc/0x114) [ 2730.676815] [<8069af44>] (usb_kill_urb) from [<7f258b50>] (brcmf_usb_free_q+0x34/0xa8 [brcmfmac]) [ 2730.684833] [<7f258b50>] (brcmf_usb_free_q [brcmfmac]) from [<7f2517d4>] (brcmf_detach+0xa0/0xb8 [brcmfmac]) [ 2730.693557] [<7f2517d4>] (brcmf_detach [brcmfmac]) from [<7f251a34>] (brcmf_attach+0xac/0x3d8 [brcmfmac]) [ 2730.702094] [<7f251a34>] (brcmf_attach [brcmfmac]) from [<7f2587ac>] (brcmf_usb_probe_phase2+0x468/0x4a0 [brcmfmac]) [ 2730.711601] [<7f2587ac>] (brcmf_usb_probe_phase2 [brcmfmac]) from [<7f252888>] (brcmf_fw_request_done+0x194/0x220 [brcmfmac]) [ 2730.721795] [<7f252888>] (brcmf_fw_request_done [brcmfmac]) from [<805748e4>] (request_firmware_work_func+0x4c/0x88) [ 2730.731125] [<805748e4>] (request_firmware_work_func) from [<80141474>] (process_one_work+0x228/0x808) [ 2730.739223] [<80141474>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [ 2730.746105] [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [ 2730.752227] [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) [ 2733.099695] kworker/0:3 D 0 1065 2 0x00000000 [ 2733.103926] Workqueue: usb_hub_wq hub_event [ 2733.106914] [<809dca20>] (__schedule) from [<809dd164>] (schedule+0x4c/0xac) [ 2733.112693] [<809dd164>] (schedule) from [<809e2a8c>] (schedule_timeout+0x214/0x3e4) [ 2733.119621] [<809e2a8c>] (schedule_timeout) from [<809dde2c>] (wait_for_common+0xc4/0x1c0) [ 2733.126810] [<809dde2c>] (wait_for_common) from [<7f258d00>] (brcmf_usb_disconnect+0x1c/0x4c [brcmfmac]) [ 2733.135206] [<7f258d00>] (brcmf_usb_disconnect [brcmfmac]) from [<8069e0c8>] (usb_unbind_interface+0x5c/0x1e4) [ 2733.143943] [<8069e0c8>] (usb_unbind_interface) from [<8056d3e8>] (device_release_driver_internal+0x164/0x1fc) [ 2733.152769] [<8056d3e8>] (device_release_driver_internal) from [<8056c078>] (bus_remove_device+0xd0/0xfc) [ 2733.161138] [<8056c078>] (bus_remove_device) from [<8056977c>] (device_del+0x11c/0x310) [ 2733.167939] [<8056977c>] (device_del) from [<8069cba8>] (usb_disable_device+0xa0/0x1cc) [ 2733.174743] [<8069cba8>] (usb_disable_device) from [<8069507c>] (usb_disconnect+0x74/0x1dc) [ 2733.181823] [<8069507c>] (usb_disconnect) from [<80695e88>] (hub_event+0x478/0xf88) [ 2733.188278] [<80695e88>] (hub_event) from [<80141474>] (process_one_work+0x228/0x808) [ 2733.194905] [<80141474>] (process_one_work) from [<80141a80>] (worker_thread+0x2c/0x564) [ 2733.201724] [<80141a80>] (worker_thread) from [<80147bcc>] (kthread+0x13c/0x16c) [ 2733.207913] [<80147bcc>] (kthread) from [<801010b4>] (ret_from_fork+0x14/0x20) It was traced down to a case where usb_kill_urb would be called on an URB structure containing more or less random data, including large number in its use_count. During the debugging it appeared that in brcmf_usb_free_q() the traversal over URBs' lists is not synchronized with operations on those lists in brcmf_usb_rx_complete() leading to handling brcmf_usbdev_info structure (holding lists' head) as lists' element and in result causing above problem. Fix it by walking through all URBs during brcmf_cancel_all_urbs using the arrays of requests instead of linked lists. Signed-off-by: Piotr Figiel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: fix NULL pointer derefence during USB disconnectPiotr Figiel7-13/+40
In case USB disconnect happens at the moment transmitting workqueue is in progress the underlying interface may be gone causing a NULL pointer dereference. Add synchronization of the workqueue destruction with the detach implementation in core so that the transmitting workqueue is stopped during detach before the interfaces are removed. Fix following Oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = 9e6a802d [00000008] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether usb_serial_simple usbserial cdc_acm brcmfmac brcmutil smsc95xx usbnet ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core CPU: 0 PID: 7 Comm: kworker/u8:0 Not tainted 4.19.23-00076-g03740aa-dirty #102 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: brcmf_fws_wq brcmf_fws_dequeue_worker [brcmfmac] PC is at brcmf_txfinalize+0x34/0x90 [brcmfmac] LR is at brcmf_fws_dequeue_worker+0x218/0x33c [brcmfmac] pc : [<7f0dee64>] lr : [<7f0e4140>] psr: 60010093 sp : ee8abef0 ip : 00000000 fp : edf38000 r10: ffffffed r9 : edf38970 r8 : edf38004 r7 : edf3e970 r6 : 00000000 r5 : ede69000 r4 : 00000000 r3 : 00000a97 r2 : 00000000 r1 : 0000888e r0 : ede69000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 7d03c04a DAC: 00000051 Process kworker/u8:0 (pid: 7, stack limit = 0x24ec3e04) Stack: (0xee8abef0 to 0xee8ac000) bee0: ede69000 00000000 ed56c3e0 7f0e4140 bf00: 00000001 00000000 edf38004 edf3e99c ed56c3e0 80d03d00 edfea43a edf3e970 bf20: ee809880 ee804200 ee971100 00000000 edf3e974 00000000 ee804200 80135a70 bf40: 80d03d00 ee804218 ee809880 ee809894 ee804200 80d03d00 ee804218 ee8aa000 bf60: 00000088 80135d5c 00000000 ee829f00 ee829dc0 00000000 ee809880 80135d30 bf80: ee829f1c ee873eac 00000000 8013b1a0 ee829dc0 8013b07c 00000000 00000000 bfa0: 00000000 00000000 00000000 801010e8 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<7f0dee64>] (brcmf_txfinalize [brcmfmac]) from [<7f0e4140>] (brcmf_fws_dequeue_worker+0x218/0x33c [brcmfmac]) [<7f0e4140>] (brcmf_fws_dequeue_worker [brcmfmac]) from [<80135a70>] (process_one_work+0x138/0x3f8) [<80135a70>] (process_one_work) from [<80135d5c>] (worker_thread+0x2c/0x554) [<80135d5c>] (worker_thread) from [<8013b1a0>] (kthread+0x124/0x154) [<8013b1a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xee8abfb0 to 0xee8abff8) bfa0: 00000000 00000000 00000000 00000000 bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e1530001 0a000007 e3560000 e1a00005 (05942008) ---[ end trace 079239dd31c86e90 ]--- Signed-off-by: Piotr Figiel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: fix WARNING during USB disconnect in case of unempty psqPiotr Figiel1-18/+24
brcmu_pkt_buf_free_skb emits WARNING when attempting to free a sk_buff which is part of any queue. After USB disconnect this may have happened when brcmf_fws_hanger_cleanup() is called as per-interface psq was never cleaned when removing the interface. Change brcmf_fws_macdesc_cleanup() in a way that it removes the corresponding packets from hanger table (to avoid double-free when brcmf_fws_hanger_cleanup() is called) and add a call to clean-up the interface specific packet queue. Below is a WARNING during USB disconnect with Raspberry Pi WiFi dongle running in AP mode. This was reproducible when the interface was transmitting during the disconnect and is fixed with this commit. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1171 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x3c/0x40 Modules linked in: nf_log_ipv4 nf_log_common xt_LOG xt_limit iptable_mangle xt_connmark xt_tcpudp xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter ip_tables x_tables usb_f_mass_storage usb_f_rndis u_ether cdc_acm smsc95xx usbnet ci_hdrc_imx ci_hdrc ulpi usbmisc_imx 8250_exar 8250_pci 8250 8250_base libcomposite configfs udc_core CPU: 0 PID: 1171 Comm: kworker/0:0 Not tainted 4.19.23-00075-gde33ed8 #99 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: usb_hub_wq hub_event [<8010ff84>] (unwind_backtrace) from [<8010bb64>] (show_stack+0x10/0x14) [<8010bb64>] (show_stack) from [<80840278>] (dump_stack+0x88/0x9c) [<80840278>] (dump_stack) from [<8011f5ec>] (__warn+0xfc/0x114) [<8011f5ec>] (__warn) from [<8011f71c>] (warn_slowpath_null+0x40/0x48) [<8011f71c>] (warn_slowpath_null) from [<805a476c>] (brcmu_pkt_buf_free_skb+0x3c/0x40) [<805a476c>] (brcmu_pkt_buf_free_skb) from [<805bb6c4>] (brcmf_fws_cleanup+0x1e4/0x22c) [<805bb6c4>] (brcmf_fws_cleanup) from [<805bc854>] (brcmf_fws_del_interface+0x58/0x68) [<805bc854>] (brcmf_fws_del_interface) from [<805b66ac>] (brcmf_remove_interface+0x40/0x150) [<805b66ac>] (brcmf_remove_interface) from [<805b6870>] (brcmf_detach+0x6c/0xb0) [<805b6870>] (brcmf_detach) from [<805bdbb8>] (brcmf_usb_disconnect+0x30/0x4c) [<805bdbb8>] (brcmf_usb_disconnect) from [<805e5d64>] (usb_unbind_interface+0x5c/0x1e0) [<805e5d64>] (usb_unbind_interface) from [<804aab10>] (device_release_driver_internal+0x154/0x1ec) [<804aab10>] (device_release_driver_internal) from [<804a97f4>] (bus_remove_device+0xcc/0xf8) [<804a97f4>] (bus_remove_device) from [<804a6fc0>] (device_del+0x118/0x308) [<804a6fc0>] (device_del) from [<805e488c>] (usb_disable_device+0xa0/0x1c8) [<805e488c>] (usb_disable_device) from [<805dcf98>] (usb_disconnect+0x70/0x1d8) [<805dcf98>] (usb_disconnect) from [<805ddd84>] (hub_event+0x464/0xf50) [<805ddd84>] (hub_event) from [<80135a70>] (process_one_work+0x138/0x3f8) [<80135a70>] (process_one_work) from [<80135d5c>] (worker_thread+0x2c/0x554) [<80135d5c>] (worker_thread) from [<8013b1a0>] (kthread+0x124/0x154) [<8013b1a0>] (kthread) from [<801010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xecf8dfb0 to 0xecf8dff8) dfa0: 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 38d234018e9e2a90 ]--- ------------[ cut here ]------------ Signed-off-by: Piotr Figiel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: reset PCIe bus on a firmware crashRafał Miłecki4-0/+59
This includes bus reset & reloading a firmware. It should be sufficient for a user space to (setup and) use a wireless device again. Support for reset on USB & SDIO can be added later. Signed-off-by: Rafał Miłecki <[email protected]> Reviewed-by: Arend van Spriel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: add a function designated for handling firmware failsRafał Miłecki4-3/+15
This improves handling PCIe firmware halts by printing a clear error message and replaces a similar code in the SDIO bus support. It will also allow further improvements like trying to recover from a firmware crash. Signed-off-by: Rafał Miłecki <[email protected]> Reviewed-by: Arend van Spriel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04brcmfmac: support repeated brcmf_fw_alloc_request() callsRafał Miłecki1-0/+1
During a normal brcmfmac lifetime brcmf_fw_alloc_request() is called once only during the probe. It's safe to assume provided array is clear. Further brcmfmac improvements may require calling it multiple times though. This patch allows it by fixing invalid firmware paths like: brcm/brcmfmac4366c-pcie.binbrcm/brcmfmac4366c-pcie.bin Signed-off-by: Rafał Miłecki <[email protected]> Reviewed-by: Arend van Spriel <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04qtnfmac: use scan duration param for different scan typesIgor Mitsyanko2-11/+49
Use scan duration param for both active and passive scan dwell times. Document what different types of dwell times are used for. Explicitly specify that if unset, automatic selection by device firmware will be used. Signed-off-by: Igor Mitsyanko <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04qtnfmac: send EAPOL frames via control pathIgor Mitsyanko10-25/+89
Use control path to send EAPOL frames to make sure they are sent with higher priority with aggregation disabled. Signed-off-by: Igor Mitsyanko <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04qtnfmac: allow changing the netnsSergey Matyukevich1-1/+2
Allow to change netns for wireless interfaces created by qtnfmac driver. Signed-off-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04qtnfmac: simplify firmware state trackingSergey Matyukevich4-15/+30
This patch streamlines firmware state tracking. In particular, state QTNF_FW_STATE_FW_DNLD_DONE is removed, states QTNF_FW_STATE_RESET and QTNF_FW_STATE_DETACHED are merged into a single state. Besides, new state QTNF_FW_STATE_RUNNING is introduced to distinguish between the following two cases: - firmware load succeeded, firmware init process is ongoing - firmware init succeeded, firmware is fully functional Signed-off-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04qtnfmac: fix core attach error path in pcie backendSergey Matyukevich4-39/+34
Report that firmware is up and running only for successful firmware download. Simplify qtnf_pcie_fw_boot_done: modify error path so that no need to pass firmware dowload result to this function. Finally, do not create debugfs entries if firmware download succeeded, but core attach failed. Signed-off-by: Sergey Matyukevich <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-04-04qtnfmac: update bands information on CHANGE_INTF commandIgor Mitsyanko1-2/+19
In some regions, different regulatory limits (like max Tx power) may be defined for different operating modes. As an example: in ETSI regions DFS master devices may use higher transmit powers compared to DFS slave devices. Update bands information in CHANGE_INTF command if mode of operation changes. Signed-off-by: Igor Mitsyanko <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.