aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2020-08-17ath6kl: Use fallthrough pseudo-keywordGustavo A. R. Silva2-4/+4
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20200727195111.GA1603@embeddedor
2020-08-17ath5k: Fix kerneldoc formatting issueLee Jones1-1/+1
Kerneldoc expects attributes/parameters to be in '@*.: ' format and gets confused if the variable does not follow the type/attribute definitions. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath5k/base.c:1111: warning: Function parameter or member 'ah' not described in 'ath5k_drain_tx_buffs' Cc: Jiri Slaby <[email protected]> Cc: Nick Kossifidis <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Cc: Jesper Dangaard Brouer <[email protected]> Cc: John Fastabend <[email protected]> Cc: "Luis R. Rodriguez" <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17wil6210: Demote non-kerneldoc headers to standard comment blocksLee Jones1-2/+2
No effort has been made to document any of the function parameters here. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ies' not described in '_wil_cfg80211_find_ie' drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ies_len' not described in '_wil_cfg80211_find_ie' drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ie' not described in '_wil_cfg80211_find_ie' drivers/net/wireless/ath/wil6210/cfg80211.c:1749: warning: Function parameter or member 'ie_len' not described in '_wil_cfg80211_find_ie' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies1' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies1_len' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies2' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'ies2_len' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'merged_ies' not described in '_wil_cfg80211_merge_extra_ies' drivers/net/wireless/ath/wil6210/cfg80211.c:1780: warning: Function parameter or member 'merged_len' not described in '_wil_cfg80211_merge_extra_ies' Cc: Maya Erez <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath5k: pcu: Add a description for 'band' remove one for 'mode'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/ath5k/pcu.c:115: warning: Function parameter or member 'band' not described in 'ath5k_hw_get_frame_duration' drivers/net/wireless/ath/ath5k/pcu.c:955: warning: Excess function parameter 'mode' description in 'ath5k_hw_pcu_init' Cc: Jiri Slaby <[email protected]> Cc: Nick Kossifidis <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Reyk Floeter <[email protected]> Cc: "W. S. Bell" <[email protected]> Cc: Luis Rodriguez <[email protected]> Cc: Pavel Roskin <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath5k: Use fallthrough pseudo-keywordGustavo A. R. Silva4-8/+8
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20200727194930.GA1491@embeddedor
2020-08-17ath11k: hal: create hw_srng_config dynamicallyKalle Valo8-66/+79
On QCA6390 reg_start and reg_size values are different from IPQ8074 so we need to change the values runtime. As we can't modify a static const variable hw_srng_config directly, instead use it as a template, copy it and modify the copy with correct values. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: enable internal sleep clockCarl Huang3-0/+21
On x86 and other non-qcom platforms, host needs to explicitly tell the firmware to use the internal sleep clock. Some QCA6390 modules have OTP burnt with external sleep clock selected, and these modules can't work expectedly unless firmware selects internal sleep clock. Add a field to hw_params to support this difference. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: fix KASAN warning of ath11k_qmi_wlanfw_wlan_cfg_sendCarl Huang1-1/+1
It's caused by reading memory out of boundary from target_ce_config_wlan. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: fix memory OOB access in qmi_decodeCarl Huang2-4/+12
The decoded_size is wrongly assigned in ath11k_qmi_msg_handlers and it results in out of boundary access in qmi_decode. The correct decoded_size should be calculated from the related ind_msg structure. This issue is exposed with QCA6390 because it needs 11 small memory chunks which are stored in qmi_wlanfw_request_mem_ind_msg_v01 and hence the decoded_size exceeds the wrongly assigend decoded_size. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: allocate smaller chunks of memory for firmwareCarl Huang1-12/+30
On x86 it's sometimes difficult to allocate a large contigous DMA memory, so instead allocate blocks of small chunk memory. In ath11k_qmi_msg_mem_request_cb() the error handling was cleaned up to avoid an unused variable warning. Also changed the test from (ret < 0) to just (ret) as the functions don't return any positive values. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: setup ce tasklet for control pathGovind Singh3-8/+112
CE srng is used for control path and CE srng processing is done using tasklet bottom half. Setup ce tasklet initialization and scheduling for control path. Needed for PCI support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: configure copy engine msi address in CE srngGovind Singh4-0/+83
Fill msi base address and msi data to be programmed in CE srang. This is used by the srng to generate the msi interrupt. Needed for PCI support. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: pci: add read32() and write32() hif operationsGovind Singh2-0/+59
Add support for bus read/write/window selection operations for reading hardware memory. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: fill appropriate QMI service instance id for QCA6390Govind Singh4-1/+6
QMI service instance id is used for qmi service lookup, IPQ8074 and QCA6390 uses different instance id for service lookup. Fill appropriate QMI service instance id for respective targets. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: add board file support for PCI devicesGovind Singh6-10/+167
PCI devices like QCA6390 load the board file differently, add support for that and the method is chosen using bus_params variables. Add support to create board name for different targets. This board name is used to parse the board data from board-2.bin for ahb/pci based targets. As struct target_mem_chunk::vaddr was changed from 'u32' to 'u32 *' in ath11k_qmi_assign_target_mem_chunk() vaddr assignments were changed to NULL to avoid a compilation warning. IPQ8074 does not use the vaddr field for anything so that change does not affect functionality. At the moment this only supports board files with BIN type. Support for ELF type, which seems to be more popular on QCA6390 devices, needs to be added later. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: add support for m3 firmwareGovind Singh6-7/+86
PCI devices like QCA6390 have a separate firmware image for the m3 micro-controller. Add support to load the firmware using m3.bin file. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: use remoteproc only with AHB devicesGovind Singh5-7/+47
QCA6390 and other PCI devices use MHI based firmware loading and do not use remoteproc, so enable it only for AHB devices. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: pci: add HAL, CE and core initialisationGovind Singh4-1/+393
Define CE pipe/qmi config and setup pci irq for the same. Call ath11k_core_init(). Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: register MHI controller device for QCA6390Govind Singh7-1/+547
Modem Host Interface (MHI) is a communication protocol to communicate with external Qualcomm modems and Wi-Fi chipsets over high speed peripheral buses. Even though MHI doesn’t dictate underlying physical layer, protocol and MHI stack is structured for PCI based devices. Register directly with MHI subsystem as a MHI device driver for firmware download to QCA6390. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: implement ath11k_core_pre_init()Kalle Valo4-6/+26
This is needed to initialise hw_params before MHI registration starts. MHI needs location of firmware directory and that's delivered via hw_params. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: pci: add MSI config initialisationGovind Singh3-0/+83
QCA6390 uses PCI MSI for CE/MHI/DP interrupt. Add MSI vector mapping and MSI enable/disable operations. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: pci: setup resourcesGovind Singh2-1/+122
Add support for setting up pci region and dma mask. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: add simple PCI client driver for QCA6390 chipsetGovind Singh10-2/+127
QCA6390 is a PCI based 11ax chipset, split AHB into own kernel module ath11k_ahb.ko and add ath11k_pci.ko for PCI devices. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Govind Singh <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: move ring mask definitions to hw_paramsKalle Valo6-101/+106
This is needed for splitting ahb and pci modules as they have different ring mask settings. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: add hw_params entry for QCA6390Carl Huang4-0/+18
Define own firmware directory and settings for QCA6390. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-17ath11k: do not depend on ARCH_QCOM for ath11kCarl Huang1-1/+0
With only IPQ8074 supported ath11k was only usable on Qualcomm architectures. But now that we are adding QCA6390 PCI support to ath11k that's not the case anymore and it can be used on any architecture supporting PCI. So remove the dependency on ARCH_QCOM. After that there is also no need to depend on COMPILE_TEST. Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 Signed-off-by: Carl Huang <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-15ath10k: correct the array index from mcs index for HT mode for QCA6174Wen Gong1-4/+20
The mcs index of HT mode is 0 to 31, please refer http://mcsindex.com/. Its spatial stream(Nss) number is from 1 to 4, mcs index is 0~7 for Nss=1, 8~15 for Nss=2, 16~23 for Nss=3 and 24~31 is for Nss=4. The mcs is reported from firmware in wmi_tlv_peer_stats_info of event WMI_TLV_PEER_STATS_INFO_EVENTID, its range is from 0~15 for QCA6174 SDIO and PCIe. It is for both Nss=1 and Nss=2, and it has 2 rate table supported_ht_mcs_rate_nss1 and supported_ht_mcs_rate_nss2 in ath10k, they are for Nss=1 and Nss=2, each table has 8 rates. It need to find the matched row number with the mcs index, for example, mcs index is 2, it is <=7, so it is Nss=1, and match row 2 in table of Nss=1. If mcs index is 12, it is >= 8 and <= 15, so it is Nss=2, it match row 4(12-8) in table of Nss=2. If mcs index is >=16, it is for Nss=3/4, it need to add rate table, so it is not support in current ath10k. This patch is to find the row number in rate table of Nss=1 or Nss=2 with the mcs index reported from firmware. This patch only effect the chips which supports_peer_stats_info of its hw_params is true, it is true only for QCA6174 currently. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-15ath10k: enable supports_peer_stats_info for QCA6174 PCI devicesWen Gong1-0/+1
When using QCA6174 PCI devices working in station mode, after connected to AP, tx bitrate is always '1.0 MBit/s' in output of command 'iw wlan0 station dump'. (QCA6174 SDIO devices are working fine.) After this patch, it show correct bitrate: Station c4:04:15:5d:97:22 (on wls1) inactive time: 312 ms rx bytes: 31496 rx packets: 173 tx bytes: 8625 tx packets: 46 tx retries: 0 tx failed: 0 signal: -76 [-88, -80] dBm signal avg: -75 [-82, -77] dBm tx bitrate: 39.0 MBit/s MCS 4 rx bitrate: 26.0 MBit/s MCS 3 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-15ath10k: remove return for NL80211_STA_INFO_TX_BITRATEWen Gong1-11/+10
ath10k_sta_statistics is used to report many info to iw wlan0 link, if it return for empty legacy and nss of arsta->txrate, then the other stats after it will not be set. It has 4 bit to set after the return: NL80211_STA_INFO_TX_FAILED NL80211_STA_INFO_RX_BITRATE NL80211_STA_INFO_TX_BITRATE NL80211_STA_INFO_TX_RETRIES This patch not effect the info of above 4 bit for all hardware, reason as below: NL80211_STA_INFO_TX_FAILED is only for htt.disable_tx_comp is true, it is for QCA6174 SDIO. NL80211_STA_INFO_RX_BITRATE and NL80211_STA_INFO_TX_BITRATE are both set in ath10k_mac_sta_get_peer_stats_info, it is only enabled for chips which supports_peer_stats_info is true in hw_params, recently only for QCA6174 SDIO, NL80211_STA_INFO_TX_BITRATE is set again in function ath10k_mac_sta_get_peer_stats_info because the value which parsed from arsta->tx_rate_code and arsta->tx_bitrate_kbps is correct for QCA6174 SDIO and PCIe, and the value arsta->txrate is not correct for QCA6174 SDIO and PCIe, so it need to set again with the correct value. NL80211_STA_INFO_TX_RETRIES is use value of arsta->tx_retries, it is set in ath10k_update_per_peer_tx_stats, which accumulate the retry_pkts in HTT message from firmware, if the chips not support this feature, then it is always 0 after accumulate, then iw wlan0 station dump always show 0 for retry count. If not set NL80211_STA_INFO_TX_RETRIES here, then it is still 0, so the result is same, then set NL80211_STA_INFO_TX_RETRIES has no effect. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-15ath10k: add wmi service peer stat info for wmi tlvWen Gong1-0/+2
ath10k_sta_statistics is used to report info for iw wlan0 link, it check ath10k_peer_stats_enabled, and ath10k_peer_stats_enabled check WMI_SERVICE_PEER_STATS bit of ar->wmi.svc_map. SVCMAP() for WMI_SERVICE_PEER_STATS was defined only for wmi_10x_svc_map and wmi_10_4_svc_map interfaces, it missed in wmi_tlv_svc_map, so it is not usable for iw wlan0 link for wmi tlv interface. If firmware report WMI_TLV_SERVICE_PEER_STATS_INFO for wmi tlv, then enable the WMI_SERVICE_PEER_STATS bit in ath10k, and then it pass check in ath10k_peer_stats_enabled and ath10k_sta_statistics pass check. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1 Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14rtl818x: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski1-3/+3
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Acked-by: Kalle Valo <[email protected]> Cc: Allen Hubbe <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Dave Jiang <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: Helge Deller <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: "James E.J. Bottomley" <[email protected]> Cc: Jason Wang <[email protected]> Cc: Jon Mason <[email protected]> Cc: Matt Turner <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: "Michael S. Tsirkin" <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Rich Felker <[email protected]> Cc: Yoshinori Sato <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-08-14ath10k: start recovery process when payload length exceeds max htc length ↵Wen Gong1-0/+4
for sdio When simulate random transfer fail for sdio write and read, it happened "payload length exceeds max htc length" and recovery later sometimes. Test steps: 1. Add config and update kernel: CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION=y CONFIG_FAULT_INJECTION_DEBUG_FS=y 2. Run simulate fail: cd /sys/kernel/debug/mmc1/fail_mmc_request echo 10 > probability echo 10 > times # repeat until hitting issues 3. It happened payload length exceeds max htc length. [ 199.935506] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 .... [ 264.990191] ath10k_sdio mmc1:0001:1: payload length 57005 exceeds max htc length: 4088 4. after some time, such as 60 seconds, it start recovery which triggered by wmi command timeout for periodic scan. [ 269.229232] ieee80211 phy0: Hardware restart was requested [ 269.734693] ath10k_sdio mmc1:0001:1: device successfully recovered The simulate fail of sdio is not a real sdio transter fail, it only set an error status in mmc_should_fail_request after the transfer end, actually the transfer is success, then sdio_io_rw_ext_helper will return error status and stop transfer the left data. For example, the really RX len is 286 bytes, then it will split to 2 blocks in sdio_io_rw_ext_helper, one is 256 bytes, left is 30 bytes, if the first 256 bytes get an error status by mmc_should_fail_request,then the left 30 bytes will not read in this RX operation. Then when the next RX arrive, the left 30 bytes will be considered as the header of the read, the top 4 bytes of the 30 bytes will be considered as lookaheads, but actually the 4 bytes is not the lookaheads, so the len from this lookaheads is not correct, it exceeds max htc length 4088 sometimes. When happened exceeds, the buffer chain is not matched between firmware and ath10k, then it need to start recovery ASAP. Recently then recovery will be started by wmi command timeout, but it will be long time later, for example, it is 60+ seconds later from the periodic scan, if it does not have periodic scan, it will be longer. Start recovery when it happened "payload length exceeds max htc length" will be reasonable. This patch only effect sdio chips. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14ath5k: Replace HTTP links with HTTPS onesAlexander A. Klimov2-2/+2
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14ath: drop unnecessary list_emptyJulia Lawall1-9/+6
list_for_each_entry{_safe} is able to handle an empty list. The only effect of avoiding the loop is not initializing the index variable. Drop list_empty tests in cases where these variables are not used. Note that list_for_each_entry{_safe} is defined in terms of list_first_entry, which indicates that it should not be used on an empty list. But in list_for_each_entry{_safe}, the element obtained by list_first_entry is not really accessed, only the address of its list_head field is compared to the address of the list head, so the list_first_entry is safe. The semantic patch that makes this change for the list_for_each_entry case is as follows: (http://coccinelle.lip6.fr/) <smpl> @@ expression x,e; statement S; identifier i; @@ -if (!(list_empty(x))) list_for_each_entry(i,x,...) S ... when != i ? i = e </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14ath9k: Use fallthrough pseudo-keywordGustavo A. R. Silva8-12/+12
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20200727193520.GA832@embeddedor
2020-08-14wcn36xx: Use sequence number allocated by mac80211Loic Poulain1-1/+2
Instead of using the firmware generated sequence number, use the one already allocated by the mac80211 layer. This allows better control of the sequence numbers and avoid to rely on same sequence for Data, QOS Data and QOS Null Data packets. Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14wcn36xx: Fix TX data pathLoic Poulain1-6/+17
This patch contains the following fixes: - Use correct queue for submitting QoS packet. The queue id to use is a one-to-one mapping with the TID. - Don't encrypt a frame with IEEE80211_TX_INTFL_DONT_ENCRYPT flag. - Use the 'special queue' for null packets, preventing the firmware to submit it as AMPDU. Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14wcn36xx: Increase number of TX retriesLoic Poulain1-2/+2
Increase the short/long retry limit to 15 in order to impove TX robustness in noisy/busy environment. 15 is the default value defined in the downstream driver. Observed number of ack timeout is reduced with this change. Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14wcn36xx: Add TX ack supportLoic Poulain4-9/+70
The controller is capable of reporting TX indication which can be used to report TX ack when IEEE80211_TX_CTL_REQ_TX_STATUS is set. The support was only partially implemented. The firmware can be configured for reporting event when a packet is acked, without specifying which packet though. In order to send a packet flagged with TX status callback, we need to stop the queue, submit the packet and wait for the firmware ack event. Then the queue can be restarted and mac80211 status callback called. In case the packet is not acked, no ack event will be received, therefore a timeout mechanism is introduced to restart the queue and call the status cb in case no event is received after a 100ms. Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14wcn36xx: Fix multiple AMPDU sessions supportLoic Poulain3-12/+34
Several AMPDU sessions can be started, e.g. for different TIDs. Currently the driver does not take care of the session ID when requesting block-ack (statically set to 0), which leads to never block-acked packet with sessions other than 0. Fix this by saving the session id when creating the ba session and use it in subsequent ba operations. This issue can be reproduced with iperf in two steps (tid 0 strem then tid 6 stream). 1.0 iperf -s # wcn36xx side 1.1 iperf -c ${IP_ADDR} # host side Then 2.0 iperf -s -u -S 0xC0 # wcn36xx side 2.1 iperf -c ${IP_ADDR} -u -S 0xC0 -l 2000 # host side Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-14ath9k: Fix typo in function namePavel Machek4-4/+4
Typo "destoy" made me wonder if correct patch is wrong; fix it. No functional change. Signed-off-by: Pavel Machek (CIP) <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/20200724083910.GA31930@amd
2020-08-14ath9k: Replace HTTP links with HTTPS onesAlexander A. Klimov1-1/+1
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-08-07Merge branch 'akpm' (patches from Andrew)Linus Torvalds4-9/+9
Merge misc updates from Andrew Morton: - a few MM hotfixes - kthread, tools, scripts, ntfs and ocfs2 - some of MM Subsystems affected by this patch series: kthread, tools, scripts, ntfs, ocfs2 and mm (hofixes, pagealloc, slab-generic, slab, slub, kcsan, debug, pagecache, gup, swap, shmem, memcg, pagemap, mremap, mincore, sparsemem, vmalloc, kasan, pagealloc, hugetlb and vmscan). * emailed patches from Andrew Morton <[email protected]>: (162 commits) mm: vmscan: consistent update to pgrefill mm/vmscan.c: fix typo khugepaged: khugepaged_test_exit() check mmget_still_valid() khugepaged: retract_page_tables() remember to test exit khugepaged: collapse_pte_mapped_thp() protect the pmd lock khugepaged: collapse_pte_mapped_thp() flush the right range mm/hugetlb: fix calculation of adjust_range_if_pmd_sharing_possible mm: thp: replace HTTP links with HTTPS ones mm/page_alloc: fix memalloc_nocma_{save/restore} APIs mm/page_alloc.c: skip setting nodemask when we are in interrupt mm/page_alloc: fallbacks at most has 3 elements mm/page_alloc: silence a KASAN false positive mm/page_alloc.c: remove unnecessary end_bitidx for [set|get]_pfnblock_flags_mask() mm/page_alloc.c: simplify pageblock bitmap access mm/page_alloc.c: extract the common part in pfn_to_bitidx() mm/page_alloc.c: replace the definition of NR_MIGRATETYPE_BITS with PB_migratetype_bits mm/shuffle: remove dynamic reconfiguration mm/memory_hotplug: document why shuffle_zone() is relevant mm/page_alloc: remove nr_free_pagecache_pages() mm: remove vm_total_pages ...
2020-08-07mm, treewide: rename kzfree() to kfree_sensitive()Waiman Long4-9/+9
As said by Linus: A symmetric naming is only helpful if it implies symmetries in use. Otherwise it's actively misleading. In "kzalloc()", the z is meaningful and an important part of what the caller wants. In "kzfree()", the z is actively detrimental, because maybe in the future we really _might_ want to use that "memfill(0xdeadbeef)" or something. The "zero" part of the interface isn't even _relevant_. The main reason that kzfree() exists is to clear sensitive information that should not be leaked to other future users of the same memory objects. Rename kzfree() to kfree_sensitive() to follow the example of the recently added kvfree_sensitive() and make the intention of the API more explicit. In addition, memzero_explicit() is used to clear the memory to make sure that it won't get optimized away by the compiler. The renaming is done by using the command sequence: git grep -w --name-only kzfree |\ xargs sed -i 's/kzfree/kfree_sensitive/' followed by some editing of the kfree_sensitive() kerneldoc and adding a kzfree backward compatibility macro in slab.h. [[email protected]: fs/crypto/inline_crypt.c needs linux/slab.h] [[email protected]: fix fs/crypto/inline_crypt.c some more] Suggested-by: Joe Perches <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Acked-by: David Howells <[email protected]> Acked-by: Michal Hocko <[email protected]> Acked-by: Johannes Weiner <[email protected]> Cc: Jarkko Sakkinen <[email protected]> Cc: James Morris <[email protected]> Cc: "Serge E. Hallyn" <[email protected]> Cc: Joe Perches <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: David Rientjes <[email protected]> Cc: Dan Carpenter <[email protected]> Cc: "Jason A . Donenfeld" <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2020-08-06Merge tag 'thermal-v5.9-rc1' of ↵Linus Torvalds1-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux Pull thermal updates from Daniel Lezcano: - Add support to enable/disable the thermal zones resulting on core code and drivers cleanup (Andrzej Pietrasiewicz) - Add generic netlink support for userspace notifications: events, temperature and discovery commands (Daniel Lezcano) - Fix redundant initialization for a ret variable (Colin Ian King) - Remove the clock cooling code as it is used nowhere (Amit Kucheria) - Add the rcar_gen3_thermal's r8a774e1 support (Marian-Cristian Rotariu) - Replace all references to thermal.txt in the documentation to the corresponding yaml files (Amit Kucheria) - Add maintainer entry for the IPA (Lukasz Luba) - Add support for MSM8939 for the tsens (Shawn Guo) - Update power allocator and devfreq cooling to SPDX licensing (Lukasz Luba) - Add Cannon Lake Low Power PCH support (Sumeet Pawnikar) - Add tsensor support for V2 mediatek thermal system (Henry Yen) - Fix thermal zone lookup by ID for the core code (Thierry Reding) * tag 'thermal-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (40 commits) thermal: intel: intel_pch_thermal: Add Cannon Lake Low Power PCH support thermal: mediatek: Add tsensor support for V2 thermal system thermal: mediatek: Prepare to add support for other platforms thermal: Update power allocator and devfreq cooling to SPDX licensing MAINTAINERS: update entry to thermal governors file name prefixing thermal: core: Add thermal zone enable/disable notification thermal: qcom: tsens-v0_1: Add support for MSM8939 dt-bindings: tsens: qcom: Document MSM8939 compatible thermal: core: Fix thermal zone lookup by ID thermal: int340x: processor_thermal: fix: update Jasper Lake PCI id thermal: imx8mm: Support module autoloading thermal: ti-soc-thermal: Fix reversed condition in ti_thermal_expose_sensor() MAINTAINERS: Add maintenance information for IPA thermal: rcar_gen3_thermal: Do not shadow thcode variable dt-bindings: thermal: Get rid of thermal.txt and replace references thermal: core: Move initialization after core initcall thermal: netlink: Improve the initcall ordering net: genetlink: Move initialization to core_initcall thermal: rcar_gen3_thermal: Add r8a774e1 support thermal/drivers/clock_cooling: Remove clock_cooling code ...
2020-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds232-1859/+27964
Pull networking updates from David Miller: 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan. 2) Support UDP segmentation in code TSO code, from Eric Dumazet. 3) Allow flashing different flash images in cxgb4 driver, from Vishal Kulkarni. 4) Add drop frames counter and flow status to tc flower offloading, from Po Liu. 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni. 6) Various new indirect call avoidance, from Eric Dumazet and Brian Vazquez. 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from Yonghong Song. 8) Support querying and setting hardware address of a port function via devlink, use this in mlx5, from Parav Pandit. 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson. 10) Switch qca8k driver over to phylink, from Jonathan McDowell. 11) In bpftool, show list of processes holding BPF FD references to maps, programs, links, and btf objects. From Andrii Nakryiko. 12) Several conversions over to generic power management, from Vaibhav Gupta. 13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry Yakunin. 14) Various https url conversions, from Alexander A. Klimov. 15) Timestamping and PHC support for mscc PHY driver, from Antoine Tenart. 16) Support bpf iterating over tcp and udp sockets, from Yonghong Song. 17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov. 18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan. 19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several drivers. From Luc Van Oostenryck. 20) XDP support for xen-netfront, from Denis Kirjanov. 21) Support receive buffer autotuning in MPTCP, from Florian Westphal. 22) Support EF100 chip in sfc driver, from Edward Cree. 23) Add XDP support to mvpp2 driver, from Matteo Croce. 24) Support MPTCP in sock_diag, from Paolo Abeni. 25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic infrastructure, from Jakub Kicinski. 26) Several pci_ --> dma_ API conversions, from Christophe JAILLET. 27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel. 28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki. 29) Refactor a lot of networking socket option handling code in order to avoid set_fs() calls, from Christoph Hellwig. 30) Add rfc4884 support to icmp code, from Willem de Bruijn. 31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei. 32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin. 33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin. 34) Support TCP syncookies in MPTCP, from Flowian Westphal. 35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano Brivio. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits) net: thunderx: initialize VF's mailbox mutex before first usage usb: hso: remove bogus check for EINPROGRESS usb: hso: no complaint about kmalloc failure hso: fix bailout in error case of probe ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM selftests/net: relax cpu affinity requirement in msg_zerocopy test mptcp: be careful on subflow creation selftests: rtnetlink: make kci_test_encap() return sub-test result selftests: rtnetlink: correct the final return value for the test net: dsa: sja1105: use detected device id instead of DT one on mismatch tipc: set ub->ifindex for local ipv6 address ipv6: add ipv6_dev_find() net: openvswitch: silence suspicious RCU usage warning Revert "vxlan: fix tos value before xmit" ptp: only allow phase values lower than 1 period farsync: switch from 'pci_' to 'dma_' API wan: wanxl: switch from 'pci_' to 'dma_' API hv_netvsc: do not use VF device if link is down dpaa2-eth: Fix passing zero to 'PTR_ERR' warning net: macb: Properly handle phylink on at91sam9x ...
2020-08-05Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds2-8/+4
Pull MMC updates from Ulf Hansson: "MMC core: - Add a new host cap bit and a corresponding DT property, to support power cycling of the card by FW at system suspend/resume. - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo cards - Convert the mmc-pwrseq DT bindings to the json-schema - Always allow the card detect uevent to be consumed by userspace MMC host controllers: - Convert a few DT bindings to the json-schema - mtk-sd: - Add support for command queue through cqhci - Add support for the MT6779 variant - renesas_sdhi_internal_dmac: - Fix dma unmapping in the error path - sdhci_am654: - Add support for the AM65x PG2.0 variant - Extend support for phys/clocks - sdhci-cadence: - Drop incorrect HW tuning for SD mode - sdhci-msm: - Add support for interconnect bandwidth scaling - Enable internal voltage control - Enable low power state for pinctrls - sdhci-of-at91: - Ludovic Desroches handovers maintenance to Eugen Hristev - sdhci-pci-gli: - Improve clock handling for GL975x - sdhci-pci-o2micro: - Add HW tuning for SDR104 mode - Fix support for O2 host controller Seabird1" * tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits) mmc: mediatek: make function msdc_cqe_disable() static MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev dt-bindings: mmc: mediatek: Add document for mt6779 mmc: mediatek: command queue support mmc: mediatek: refine msdc timeout api mmc: mediatek: add MT6779 MMC driver support mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1 mmc: via-sdmmc: use generic power management memstick: jmb38x_ms: use generic power management mmc: sdhci-cadence: do not use hardware tuning for SD mode mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x mmc: cqhci: Fix a print format for the task descriptor mmc: sdhci-of-arasan: fix timings allocation code mmc: sdhci: Fix a potential uninitialized variable dt-bindings: mmc: renesas,sdhi: convert to YAML dt-bindings: mmc: convert arasan sdhci bindings to yaml mmc: sdhci: Fix potential null pointer access while accessing vqmmc mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND dt-bindings: mmc: Add full-pwr-cycle-in-suspend property ...
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds13-22/+22
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-08-04Merge tag 'wireless-drivers-next-2020-08-04' of ↵David S. Miller120-1259/+5577
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.9 Second set of patches for v5.9. mt76 has most of patches this time. Otherwise it's just smaller fixes and cleanups to other drivers. There was a major conflict in mt76 driver between wireless-drivers and wireless-drivers-next. I solved that by merging the former to the latter. Major changes: rtw88 * add support for ieee80211_ops::change_interface * add support for enabling and disabling beacon * add debugfs file for testing h2c mt76 * ARP filter offload for 7663 * runtime power management for 7663 * testmode support for mfg calibration * support for more channels ==================== Signed-off-by: David S. Miller <[email protected]>
2020-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo11-65/+88
mt76 driver had major conflicts within mt7615 directory. To make it easier for every merge wireless-drivers to wireless-drivers-next and solve those conflicts.
Powered by cgit, Gruvboxed by Blaster4385.