Age | Commit message (Collapse) | Author | Files | Lines |
|
Add an option for adding a PASN responder, specifying the HLTK and
TK (if not associated). When a receiving a range request for a
PASN responder, the driver will ask for a secured measurement with
the specified HLTK and TK.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200930161256.28c5f5266000.I2d58b72ff92c47ac33a6aacc27fbf3790b6dfc51@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
For secure ranging with an associated station, the driver only needs
to set the HLTK. There is no need to add an internal station for PMF
since the FW will use the existing station which already has the TK
installed.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200930161256.fcebaa5c9bc8.Ic584cc47fee717d0bdb43965798dbdf45d89910a@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
When a PASN station is added, set the HLTK to FW.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200930161256.1c7a59fd3164.I68005f0015ad04e53d0239e2d2ee85d5ffdeaa37@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
The overcome instabilities in the RTT results add smoothing logic
to the reported results. In short, the smoothing logic tracks the
RTT average of each responder for a period of time, and in case
a new RTT results is found to be a spur, the tracked RTT average
is reported instead of the current RTT measurement.
Smooth logic debug configuration using iwl-dbg-cfg.ini:
- MVM_FTM_INITIATOR_ENABLE_SMOOTH: Set to 1 to enable smoothing logic
(default=0).
- MVM_FTM_INITIATOR_SMOOTH_ALPHA: A value between 0 - 100, defining
the weight of the current RTT results vs. the RTT average tracked
based on the previous results. A value of 100 means use only the
current RTT results.
- MVM_FTM_INITIATOR_SMOOTH_AGE_SEC: The maximal time in seconds in which
the RTT average tracked based on previous results is considered valid.
- MVM_FTM_INITIATOR_SMOOTH_UNDERSHOOT: if the current RTT is positive
and below the RTT average by at least this value, report the average
RTT instead of the current one. In units of picoseconds.
- MVM_FTM_INITIATOR_SMOOTH_OVERSHOOT: if the current RTT is positive
and above the RTT average by at least this value, report the average
RTT instead of the current one. In units of picoseconds.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200930161256.48a9cec2081b.Iaec1e29f738232adfe9e2ea8e9eb9b6ff0323ae1@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Version 3 of the dynamic config command adds support for configuring
the HLTK for secure ranging with a station.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.f54be85420dd.I39b498fbbbc2f6eed6ce1f77b0f59f7a72fab343@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Version 11 of the range request command adds support for setting
the PN for secure ranging. For now, this is not yet supported.
The same functions that are used for version 9 and 10 are also
used for version 11 as the common part is the same.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.6f9ed4140e8c.I046e0d9f6dfaafda9794e5eb2ee1f02fcad2851a@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Driver doesn't support fw without wide_cmd
so driver always sets it to true. instead of setting
it always to true just remove the field.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.e6137861d917.I93405604eb503568688b28d3169fea7fbb88ed7e@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
For new APIs this avoids checking every return if it's
IWL_FW_CMD_VER_UNKNOWN (99) or it's lower than the new API value
Done with spatch:
-iwl_fw_lookup_cmd_ver(E1, E2, E3)
+iwl_fw_lookup_cmd_ver(E1, E2, E3, IWL_FW_CMD_VER_UNKNOWN)
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.70bec6eb8008.I6ea78553801d33f7ed10fcd2e4be4ba781fe469a@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
In non acpi compilations iwl_sar_geo_init isn't called which results with
compilation warning so just remove the declaration.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.3de51c557566.I67a0eedddbd56e51eb5150c65756eb5724b65e69@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
This helps with congested environments reducing the conflict cost to
RTS retries only, instead of the entire BA packet.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.da97d87d7adf.If06301d4660b14e459195a15831b069b9f6c5e3c@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Add a new version to iwl_wowlan_kek_kck_material_cmd
struct to support akm and send the new cmd if supported.
Signed-off-by: Nathan Errera <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.6ec5889d793d.I32ad41a27f046a4047cf852c83936142fca4f20b@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Add support for the new version of the GEO_TX_POWER_LIMIT command.
This new version includes UHB values in the table, but for now, since
we don't have the ACPI values yet, we support the API, but don't set
the extra values.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.3700197ed1ed.Ia53fb9c4b5033683fd426d51a0ddc46fb444c805@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Add the version number to the iwl_geo_tx_power_profile_cmd structs and
move the union into a common place. Additionally, reuse the code that
sets elements that are at the same place in the struct across
different versions.
While at it remove an unused variable, add a comment and move the v2
specific element setting to inside the if statement. Additionally,
invert the if for slightly more readability.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.23ec241f16cd.I8cd21fc5a2498e820b50e1f49a4cbfe545afe30e@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
The new version of the command can support more subbands and CDB, so
it can contain more data than earlier versions. Implement support for
the new version of the command, even though we don't have more data to
write to it yet.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.d709a8f17d1d.I9fa54883667c72dabf6d813c70be77538d9af38d@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
The SAR profile tables will be larger in the next version, so prepare
the iwl_sar_select_profile() function to handle multiple sizes and
update the relevant callers.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.da5a95917df4.I84d44c9dd0b858c403a81ca621b5a7b615a3aa7e@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Create a common structure to contain all different versions of the
tx_power_cmd instead of making a union of the different structs
everywhere we need them. Also move the common part of these structs
into a separate structure (instead of reusing v3) and leave the
per_chain_restriction part out of the common part, because this will
change in version 6 of the command (which will be added soon).
While at it, rename per_chain_restriction to per_chain to shorten it.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928121852.4f0bea9fe077.Ib3b540a8288af32d6fa213448e13f82763f85bc9@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
added ID for ma in AX family.
Signed-off-by: Roee Goldfiner <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.8cf7040fe88c.I39ef960a4d448b7d303c2bbfcccded09a54479b0@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
This function is only called from acpi.c, which is only included in
the makefile if CONFIG_ACPI is set. So it doesn't make sense to
declare a dummy version of it when CONFIG_ACPI is not defined.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.1833ae348c7f.I3271f9d2f7e484779a6319a1514cd0b7221fe326@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Only iwlmvm uses this function and it's so simple that it's clearer if
it's spelled out in the code anyway, so remove it and add the check
where needed.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.9e2f296f5cfc.I4b2c025768b5ceff93a80ba0ae9ee7784d6d7402@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
On newer hardware, we have the full checksum, so use it to report
CHECKSUM_COMPLETE and avoid the protocol specific hardware parsing.
Note that the hardware already parses/removes the SNAP header, so
we actually literally get what we need to report to the stack, as
we're expected to checksum everything after the L2 header (which
is translated/added by mac80211).
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.869e829c815d.I70f374865b0acafc675a8d7959912eeaeb595acf@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Currently we have the same info in two variables,
If umac_error_event_table is 0, we know that UMAC log is not supported,
so we don't need the support_umac_log field.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.299959eeb47b.Ie1f3eecc06e3620098dda74f674f6409b90fe7fa@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
- Change the iwl_all_tsc_rsc struct to hold a sta_id (__le32) field,
while preserving the union, used in the older version.
- Adjust the use of this command according to the TLV.
Signed-off-by: Dan Halperin <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.8c621903db59.I1cc7afedc0ff2009fe1abf007684339f299b73aa@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
A couple of functions were exported from the acpi.c file
unnecessarily, since they are only used internally in that file. Make
them static.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.6449efabcb8b.I030fa71253260f34b588951d78170551b633c046@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
The the driver prevents new Tx from being sent during the remove-station
flow is by invalidating the fw_id_to_mac_id rcu of that station.
However, if there was any Tx still in-flight (tx-cmd was sent but the
ba-notif wasn't received yet) the ba-response to those frames is simply
ignored without actually reclaiming anything. This later causes the
driver to think that that some of the station's queues aren't empty when
in practice they are which causes errors in the station remove flow.
Fix this by performing the tx-reclaim also if the rcu is invalid. any DB
that can't be updated due to this is not very important at this stage
since the station is about to be removed soon anyways.
Signed-off-by: Naftali Goldstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.72c604b4eda9.I21e75b31a9401870d18747355d4f4305b2fe1db8@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Add a sta_id (__le32) to the cmd, in order to support CDB protocol.
Signed-off-by: Dan Halperin <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.5edc24ef3907.I68820c8c0946451cf0cca14dda171fa304b1dc43@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Due to a missing break, the management multicast key was installed even
though we don't really support it. Fix that, so mac80211 would know that
it should protect frames in software.
Signed-off-by: Andrei Otcheretianski <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.019a64e96d44.I609a995611ac5286e442cd54f764eaf4a7249ac0@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
A print in the remain on channel code was too long and caused
a WARNING, split it.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Fixes: dc28e12f2125 ("iwlwifi: mvm: ROC: Extend the ROC max delay duration & limit ROC duration")
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200930102759.58d57c0bdc68.Ib06008665e7bf1199c360aa92691d9c74fb84990@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
dev_cmd_offs, page_offs field is not directly related to the PCIe
transport, so move the structures it uses to the common iwl-trans.h header.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.83b41765961f.Icd12bfb2a736ccf4cbe080973c746fb70a3c4a50@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Support v2 of regulatory capability flags parsed from the device
NVM. New API support is determined by FW lookup of the MCC update
command resposnse version, where version 6 supports the new API.
Signed-off-by: Gil Adam <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.3d47f4e8ab98.I0fdd2ce23166c18284d2a7a624c40f35ea81cbc2@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
With the new region we can handle in user space understanding
the struct type and version and driver doesn't need to be involved
at all.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.88c431fad7da.I282944cbad5aa367735a9f9a5c47cfbd107a5fc0@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
This timepoint was removed from the FW, so we remove it from here too
for consistency. It's now marked as reserved to preserve the
enumeration.
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200926002540.a451fdd0a0ab.Idd8f59a49816d8484fe7dea3f1cec7a36cbf86f7@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Version 2 of the PPAG table command supports more sub-bands than
previous. Change relevant command structs and the reading of the ACPI
tables.
Signed-off-by: Gil Adam <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200924162106.fb29c33d2cb9.I942bfe645e9d47cd1fcf6435506061f8b2cea21a@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
add few PCI ID'S for ma with gf and mr in AX family.
Signed-off-by: Ihab Zhaika <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.6add94c21abe.I1aa1c5e3c2c12ce82ed30429e0ad92225ece7ce3@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
The bc_table_dword code is not directly related to the PCIe transport,
so move the structures it uses to the common iwl-trans.h header.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.1e3027abd0b5.Ie9f672983796586671a4374bf6dcda846875b690@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
The tfd_* code is not directly related to the PCIe transport,
so move the structures it uses to the common iwl-trans.h header.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.a1a2ce2bce38.Ieada0fe087ebcc9bc84e22fc5abc9dba8914dd9f@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
The bc_pool code is not directly related to the PCIe transport,
so move the structures it uses to the common iwl-trans.h header.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.f6469c62665d.Id920f1ae8f70886b66a98956a6412726d29a9481@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
txcmd fields is not directly related to the PCIe transport,
so move to the common iwl_trans_alloc function.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200924162105.862ef88d1ab2.Iba220a962b5d6d05c030b9275d97a89202d055dc@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
TWT has been disabled during stabilization and further testing of the
FW code. It is now considered stable, so TWT can be enabled in the
driver.
Signed-off-by: Golan Ben Ami <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200928093526.44c9093fc632.I181fc5c80988e7ecea281c60e57a22ae7ec86716@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
A FTM responder may do PASN authentication with unassociated stations
to allow secure ranging. In this case, the driver will add an internal
station and install the TK so the FW will accept protected FTM
request frames from this station and will send a protected FTM
response frame.
In addition, the driver needs to configure the HLTK to the FW so
the FW can derive the secure LTF bits. This is left for a later
patch since it is not yet supported by the FW.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.c915b44ad7dd.I72ef7f9753964555561c27ec503241105eddb14e@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
add few PCI ID'S for AX201 family including killer cards.
Signed-off-by: Ihab Zhaika <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.21397978115f.Id2d95275a36a6bb6b226d12cb6c5a629334587db@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Move this parser to a common place, instead of having it in code that
is specific to mvm.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.45b270b0bf2f.I4561138cd5be9f44fa42cfce10258de0607be40f@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
In version 10 we actually go back to the struct size before 9
so only for version 9 we need the size fixup
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.33b55b3ca440.Ib0202c7011d8d0e09f55fcceceb9d3d5051631c6@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Evaluate the appropriate DSM from ACPI to set ETSI SRD 5.8GHz
channels to passive or disabled, default behaviour is enabled.
Add enums and refactor evaluation of DSM functions for better
readablity and more informative debug prints.
Signed-off-by: Gil Adam <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.816130ee75e0.I727a217be7c967a97960b197a816fc053d10c48a@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
There is an issue in the HW DMA engine in the 9000 family of devices
when more than 6 RX queues are used. The issue is that the FW may
hang when IWL_MVM_RXQ_NSSN_SYNC notifications are sent.
Fix this by limiting the number of RX queues to 6 in the 9000 family
of devices.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.37d90f9ceb0c.I8dfe8a7d3a7ac9f0bc9d93e4a03f8165d8c999d2@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
This avoids cases that we have a lot of packets in the queue and until we
are able to transmit SSN packet the other side sends DELBA due to timeout.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.8a8481c60663.I353ab6f1bc04c7fdf873dead59f483454e2425ba@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Signed-off-by: Shaul Triebitz <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.a34626b2e6ba.I86ba17db16fc99bb094bef4d0cc40ee99d5ba233@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
If Protected-TWT is supported by BSS and by us, set the
PROTECTED_TWT bit in the data_policy in the MAC context command.
Signed-off-by: Shaul Triebitz <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.e5e36b41fbd7.I25be500451890be2165fa56cbe0b0a600b4a2a9e@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
Add the PROTECTED_TWT bit to the MAC context data_policy enum.
Define the PROTECTED_TWT TLV.
Signed-off-by: Shaul Triebitz <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.c80b994d6bf0.Ifd45dfd5066283886f969313c20ff81edde428ff@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
If extended NSS capability is used, the NSS for 160 may be
lower than for 80.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Luca Coelho <[email protected]>
Link: https://lore.kernel.org/r/iwlwifi.20200911204056.523f5eca82ce.Ic0cd9cc86a91b1f23a5a54921736332be9abac29@changeid
Signed-off-by: Luca Coelho <[email protected]>
|
|
There are reports that 8822CE fails to work rtw88 with "failed to read DBI
register" error. Also I have a system with 8723DE which freezes the whole
system when the rtw88 is probing the device.
According to [1], platform firmware may not properly power manage the
device during shutdown. I did some expirements and putting the device to
D3 can workaround the issue.
So let's power cycle the device by putting the device to D3 at shutdown
to prevent the issue from happening.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=206411#c9
BugLink: https://bugs.launchpad.net/bugs/1872984
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|