aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)AuthorFilesLines
2017-06-05iwlwifi: add dbgc_supported to transport configurationSara Sharon4-4/+8
Use transport configuration to determine DBGC support instead of relying on device family. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: remove references to 8000 B-step devicesSara Sharon4-36/+2
We don't have any 8000 B-step right now, and there is no firmware loading code for them anyway. Further more, 9000 B-step devices will hit those code paths. Remove code that was introduced only for 8000 B-step. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: cleanup references to 8000 family in NVM codeSara Sharon8-74/+70
NVM code is tightly coupled with 8000 family, while it really refers to extended NVM format introduced back then. Separate it to a configuration dependent boolean, and rename defines accordingly. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: pcie: add AMSDU to gen2Sara Sharon3-6/+172
This is essentially the same code as gen1, except that it uses gen2 functions and SW checksum is not included. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: document RX structuresJohannes Berg2-5/+84
Document the structures used in RX and link them to the command ID. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: add AMSDU flag to offload assistSara Sharon1-1/+7
Enable offload assist for AMSDU when the AMSDU present flag is set. Fixes: a830baba9c2e ("iwlwifi: mvm: support new TX API") Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05Merge tag 'iwlwifi-for-kalle-2017-06-05' of ↵Kalle Valo17-78/+115
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Fixes for 4.12: * Some memory leaks; * IBSS support; * Some bugzilla bugs; * Some runtime PM fixes; * Rate-scaling issues; * Some locking problems;
2017-06-05iwlwifi: fix host command memory leaksShahar S Matityahu1-3/+6
Sending host command with CMD_WANT_SKB flag demands the release of the response buffer with iwl_free_resp function. The patch adds the memory release in all the relevant places Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265Luca Coelho2-4/+4
In a previous commit, we removed support for API versions earlier than 22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were set to 17. Fix that. Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22") Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: clear new beacon command template structJohannes Berg1-1/+1
Clear the struct so that all reserved fields are zero when we send the struct down to the device. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: don't fail when removing a key from an inexisting staLuca Coelho1-8/+5
The iwl_mvm_remove_sta_key() function handles removing a key when the sta doesn't exist anymore. Mistakenly, this was changed to return an error while fixing another bug. If the mvm_sta doesn't exist, we continue normally, but just don't try to remove the igtk key. Fixes: cd4d23c1ea9b ("iwlwifi: mvm: Fix removal of IGTK") Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3Luca Coelho1-2/+4
We only need to handle d0i3 entry and exit during suspend resume if system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry failures will cause suspend to fail. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791 Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: fix firmware debug restart recordingEmmanuel Grumbach4-19/+27
When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: tt: move ucode_loaded check under mutexJohannes Berg1-3/+5
The ucode_loaded check should be under the mutex, since it can otherwise change state after we looked at it and before we got the mutex. Fix that. Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: support ibss in dqa modeLiad Kaufman1-1/+12
Allow working IBSS also when working in DQA mode. This is done by setting it to treat the queues the same as a BSS AP treats the queues. Fixes: 7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode") Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: Fix command queue number on d0i3 flowHaim Dreyfuss1-1/+4
During d0i3 flow we flush all the queue except from the command queue. Currently, in this flow the command queue is hard coded to 9. In DQA the command queue number has changed from 9 to 0. Fix that. This fixes a problem in runtime PM resume flow. Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode") Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: rs: start using LQ command colorGregory Greenman6-36/+47
Up until now, the driver was comparing the rate reported by the FW and the rate of the latest LQ command to avoid processing data belonging to the old LQ command. Recently, FW changed the meaning of the initial rate field in tx response and it holds the actual rate (which is not necessarily the initial rate of LQ's rate table). Use instead LQ cmd color to be able to filter out tx responses/BA notifications which where sent during earlier LQ commands' time frame. This fixes some throughput degradation in noisy environments. Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: add wait for tx queue emptySara Sharon6-34/+107
Now that we have 512 queues, add a wait for single TX queue to gen2. This replaces gen1 wait_tx_queues_empty, which was limited to 32 queues. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: fix many kernel-doc warningsJohannes Berg3-20/+46
Fix many kernel-doc warnings. In one case, this required adding a new enum value to be able to document things properly. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: remove unused REPLY_MAXJohannes Berg1-2/+0
This value is unused, and there's no reason we'd ever use it. Just remove it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: kernel-doc: make proper linksJohannes Berg4-12/+12
Using %enum instead of &enum (and in one case, %struct) results in the wrong parsing. Fix that so that if documentation is generated, the result is clickable links. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: remove unused TX_CMD_NEXT_FRAME_*Johannes Berg1-24/+1
Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: Add fw_name_pre_rf_next_step to support different rf stepsHaim Dreyfuss4-0/+18
Integrated chip may have different HW and RF steps. Currently, the driver supports only different HW steps. Add logic to support different RF steps enables combining different HW and RF steps. Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: pcie: support page dumping in wrt in gen2Liad Kaufman1-0/+29
In gen2, page dumping needs to be done in the trans layer, as it is the one with access to the paging pointers. Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: remove wrt support of page dumps in gen2Liad Kaufman1-2/+4
In gen2, page dumping should be done in transport layer, since the addresses needed for the paging mechanism reside there. Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: document structures used by commandsJohannes Berg2-12/+209
Add documentation to a lot of command IDs that links to the appropriate structure(s) used with those IDs. In one case, actually add and use a new struct for that purpose. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: create/name various enumsJohannes Berg3-19/+77
Some values should be in enums so documentation can refer to them, some values should be named for the same reason. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: disentangle binding command versionsJohannes Berg1-2/+21
The comments/size of the different binding commands get lost in documentation, so introduce two different command structs that can be used there. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: update device ID for a000 familySara Sharon2-6/+9
Three configurations will share device ID 2720, and will be differentiated by RF ID. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: add documentation links to various fieldsJohannes Berg7-32/+45
Link various fields to the documentation of the enums that define their values. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: fix some kernel-docJohannes Berg7-68/+78
This mostly fixes missing tags/struct names, but also some other things. Lots of issues remain though. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: wait for the flushed queue onlySara Sharon1-2/+1
The function flushed only agg queue and no more traffic is queued on it. However, it waits for all queues to empty, which is not necessary and may take more time. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: add documentation to some WoWLAN commandsJohannes Berg1-1/+28
Add some documentation for the WoWLAN commands, also linking the correct enums used. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: disentangle paging command structsJohannes Berg2-15/+33
Instead of using a union and hard-coding the size difference, declare both command structs properly, use a union on the stack to build them and the right sizeof() for the size. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: use u8 for reserved fieldsJohannes Berg2-3/+3
There's no saying what kind of type a reserved field will get in the future, so use u8 arrays to reserve space. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: fix MCC endianness bugJohannes Berg2-3/+3
Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: use proper sta_addr in firmware APIJohannes Berg2-5/+3
There's no point to declare an address as a __le32/__le16 and then only take a pointer to it anyway, change that to just a sta_addr[ETH_ALEN]. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: document which group enums are used with which group IDJohannes Berg1-3/+24
Make it explicit which command definition enum is supposed to be used with which command group, rather than relying on being able to figure it out by name. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: fix endianness in lq_cmd declarationJohannes Berg1-1/+1
This member doesn't seem to be used, so this doesn't really fix anything, but it's better to have the right type there. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: support old method of NVM parsingSara Sharon2-1/+10
Add configuration for allowing driver's nvm parsing and bypassing the new host command, for debugging. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: support getting nvm data from firmwareSara Sharon6-22/+194
This API replaces the complex NVM parsing of the iwlwifi module. Instead, we get all needed data from firmware. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: flush per station for DQA modeSara Sharon5-14/+42
Avoid using the global flush and move to flush per station whenever possible in DQA mode. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-01ath10k: fix the logic of limiting tdls peer countsRyan Hsu1-28/+21
The original idea is to limit the maximum TDLS peer link, but the logic is always false, and never be able to restrict the number of TDLS peer creation. Fix the logic here and also move the checking earlier, so that it could avoid to handle the failure case, e.g disable the tdls peer, delete the peer and also vdev count cleanup. Signed-off-by: Ryan Hsu <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-06-01ath10k: add BMI parameters to fix calibration from DT/pre-calAnilkumar Kolli2-3/+15
QCA99X0, QCA9888, QCA9984 supports calibration data in either OTP or DT/pre-cal file. Current ath10k supports Calibration data from OTP only. If caldata is loaded from DT/pre-cal file, fetching board id and applying calibration parameters like tx power gets failed. error log: [ 15.733663] ath10k_pci 0000:01:00.0: failed to fetch board file: -2 [ 15.741474] ath10k_pci 0000:01:00.0: could not probe fw (-2) This patch adds calibration data support from DT/pre-cal file. Below parameters are used to get board id and applying calibration parameters from cal data. EEPROM[OTP] FLASH[DT/pre-cal file] Cal param 0x700 0x10000 Board id 0x10 0x8000 Tested on QCA9888 with pre-cal file. Signed-off-by: Anilkumar Kolli <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-06-01ath10k: initialize nbytes to 0Ben Greear1-0/+4
ath10k firmware checks nbytes == 0 as part of determining if DMA has completed successfully. To help make this work more often, have the driver initialize nbytes to zero when freeing the descriptor slot. Signed-off-by: Ben Greear <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-06-01ath10k: log when longer bmi cmds happenBen Greear1-6/+21
This lets one have a clue that maybe timeouts are happening when we just aren't waiting long enough. Signed-off-by: Ben Greear <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-06-01ath10k: increase BMI timeoutBen Greear1-2/+2
When testing a 9888 chipset NIC, I notice it often takes almost 2 seconds, and then many times OTP fails, probably due to the two-second timeout. [ 2269.841842] ath10k_pci 0000:05:00.0: bmi cmd took: 1984 jiffies (HZ: 1000), rv: 0 [ 2273.608185] ath10k_pci 0000:05:00.0: bmi cmd took: 1986 jiffies (HZ: 1000), rv: 0 [ 2277.294732] ath10k_pci 0000:05:00.0: bmi cmd took: 1989 jiffies (HZ: 1000), rv: 0 So, increase the BMI timeout to 3 seconds. Signed-off-by: Ben Greear <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-06-01rsi: use subdirectory for firmware fileamit karwar1-1/+1
linux-firmware maintainers prefer to have a subdirectory for firmware files. Code is changed here to pick firmware file from a subdirectory. Firmware file with a new loading mechanism will be submitted inside rsi directory. Signed-off-by: Amitkumar Karwar <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-06-01mwifiex: uap: process remain on channel expired eventXinming Hu1-0/+11
AP interface need process remain-on-channel firmware event and notify cfg80211, this will be used in the listen-stage of p2p find procedure. Signed-off-by: Xinming Hu <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-06-01mwifiex: simplify the code around ra_listShawn Lin2-11/+4
We don't need to check if the list is empty separately as we could use list_first_entry_or_null to cover it. Signed-off-by: Shawn Lin <[email protected]> Reviewed-by: Brian Norris <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.