aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel
AgeCommit message (Collapse)AuthorFilesLines
2024-03-25wifi: iwlwifi: mvm: fix active link counting during recoveryBenjamin Berg1-12/+8
During recovery, the chanctx_conf in mac80211 is still non-NULL even though the channel context has not yet been assigned again. In that case, the real count is actually lower. Switch to instead count the phy_ctx assignment and ensure that the assignment is cleared at the start of recovery. Fixes: 12bacfc2c065 ("wifi: iwlwifi: handle eSR transitions") Signed-off-by: Benjamin Berg <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240320232419.55f37339e7d1.I57006568a90ffb7a1232def1b2f3264dea711ba6@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: assign link STA ID lookups during restartBenjamin Berg1-1/+12
When restarting the HW, mac80211 first adds the STA back with only one link enabled. This means that iwl_mvm_alloc_sta_after_restart will not see the other links and will not do the assignment. As such, do the assignment when mac80211 is activating the link for the station. Signed-off-by: Benjamin Berg <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240320232419.4a3273e5c6be.I7cb6cf096ab135f4b489f2806b116563624aa5ee@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: allocate STA links only for active linksJohannes Berg1-3/+3
For the mvm driver, data structures match what's in the firmware, we allocate FW IDs for them already etc. During link switch we already allocate/free the STA links appropriately, but initially we'd allocate them always. Fix this to allocate memory, a STA ID, etc. only for active links. Fixes: 57974a55d995 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.f2093ff73465.Ie891e1cc9c9df09ae22be6aad5c143e376f40f0e@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: enable monitor on passive/inactive channelsJohannes Berg2-3/+12
If firmware supports pure passive monitor on passive/inactive channels, enable that. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.7c62f421f03e.I9969d3a46fed48e67fa28a7d00080b0dd314dabd@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: Do not warn on invalid link on scan completeIlan Peer1-1/+6
As it is possible that by the time the scan is completed the link was already removed. Fixes: 3a5a5cb06700 ("wifi: iwlwifi: mvm: Correctly report TSF data in scan complete") Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.619d3574a757.I0523e92547f0288c8b0119b1fdc5e967a5a8956e@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: remove 6 GHz NVM overrideJohannes Berg1-5/+0
We shouldn't override the flags to zero here for 6 GHz capable devices any more, but since LAR will be there, this also shouldn't make a difference now. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.73bff65d5597.I1ae23a509fad252c0237e74defba6cb74b6ca188@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: don't support puncturing in 5 GHzJohannes Berg1-0/+2
This is simply not supported, so set the flag for it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.f61448c4a43a.Ib740b341af0ca6c3e06cc9a0b04447a6635df7a8@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: fw: add clarifying comments about iwl_fwrt_dump_dataJohannes Berg2-0/+6
iwl_fw_dbg_collect_sync() unconditionally accesses 'trig' at the beginning of the function, even though the data has an inner union and 'trig' isn't necessarily always used, it can be 'desc' instead. Add comments clarifying why this is OK, that 'trig'/'desc' must be first in the struct and how in it the use of the union's sub-structs is differentiated. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.49c3a39737cc.I91c588e0d66b49f0ee9103e8d4a0e501c2fd36d6@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: always apply 6 GHz probe limitationsBenjamin Berg1-66/+89
When scanning on 6 GHz we allocate a set of short-SSIDs and BSSIDs to probe. However, when we need to do an active scan because of a hidden SSID, then we could add too many entries for probing causing an assertion in the firmware input validation. Reshuffle the code a bit to first calculate the maximum number of short-SSIDs and BSSIDs that are permitted for the channel. Then ensure that we do not set more than the permitted number of bits in the bitmasks and turn on force_passive when we have surpassed the limit. While at it, also change the logic so that allow_passive is always disabled in case a hidden SSID is included. Previously, we might not have done so if we added the short-SSID based on the number of BSSIDs already in the request. Signed-off-by: Benjamin Berg <[email protected]> Reviewed-by: Ilan Peer <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.e0b114b68d1d.Ib86afccdb955f0d221ef5d7b8afdc1d67c3542ef@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: support iwl_dev_tx_power_cmd_v8Emmanuel Grumbach3-2/+36
This just adds a __le32 that we (currently) don't use. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.29ff7a88ddac.I39cf2ff1d1ddf0fa62722538698dc7f21aaaf39e@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: add a kunit test for PCI table duplicatesJohannes Berg3-2/+29
We shouldn't have entries in the table that match the same device; it's possible to have a specific entry followed by a less specific entry (i.e. NNNN followed by ANY), but not entries that are dead, where an earlier entry matches the same as a later one. Add a test similar to the existing devinfo test to catch this situation. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.826b859abd62.I8140d7e9ae52ac50c6830818f8f95ccd0d94b3d3@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: add debugfs for forcing unprotected ranging requestAvraham Stern3-1/+19
Add an option to force sending unprotected ranging request even if the station is associated to the responder or a PASN keys are configured. This is used for testing. Signed-off-by: Avraham Stern <[email protected]> Reviewed-by: Miriam Rachel Korenblit <[email protected]> Link: https://msgid.link/20240319100755.8523150148ec.I7ab6c547513717e69ec385f72a8f43ea00bd9e0a@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: Add debugfs entry for triggering internal MLO scanIlan Peer1-0/+56
Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.3dd3e8c42c27.I9434dc641b837601c72f10684fbfad2c0fb31a99@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: Introduce internal MLO passive scanIlan Peer3-10/+88
Add a new scan type that can be used for internal MLO purposes, i.e., in case updated BSS information is required. Currently only passive scanning is supported. Signed-off-by: Ilan Peer <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Reviewed-by: Ayala Beker <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.5ce3e756cf8f.I4a41065f6b3a6ec6c6e44e83bc97c277ff7c599e@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: pcie: remove duplicate PCI IDs entryJohannes Berg1-1/+0
There's a duplicate entry for 0x51f1, which shouldn't be present, though the first entry will correctly be taken. Remove the second one. Signed-off-by: Johannes Berg <[email protected]> Reviewed-by: Mukesh Sisodiya <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.3e995954d519.I0d028993e17e26b63c0ee89d7b1714ec88f2a158@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: Refactor scan startIlan Peer1-7/+16
To support staring internal scan, refactor the scan code such that the body iwl_mvm_reg_scan_start() is now moved to a local function that can be used by other flows as well. Signed-off-by: Ilan Peer <[email protected]> Reviewed-by: Ayala Beker <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.e7833d4cfc53.I43c1c533c2a5243229002fde6360d423946c54fa@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: advertise IEEE80211_HW_HANDLES_QUIET_CSAJohannes Berg2-4/+61
The firmware has handled quiet in CSA for a long time now, but it didn't really matter much. However, now with quiet CSA on a perhaps secondary link, we don't want mac80211 to stop queues, we can continue using a link that's not requiring quiet. Set the feature flag for MLO-capable devices indicating that we'll handle the quiet entirely in the driver/device. However, the firmware doesn't handle quiet in AP mode since we don't really expect to really be needing that (without radar detection), but - even for testing - make that work properly by simply not pulling from TXQs in this scenario. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.fa75403b5eaa.Ie3ff02215f810fcfefd6a22c481567f94f61c0c6@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: fix flushing during quiet CSAJohannes Berg2-2/+19
If, for any reason, we're going to attempt to flush the queues while quiet CSA is happening, this cannot succeed. This could be the case if for example mac80211 were to flush after TXing e.g. a deauth frame due to disconnecting during the CSA. In this case, drop the frames instead, the firmware won't let us do any transmissions and may also become unhappy if we're not going to disconnect quickly enough. Currently this doesn't happen as mac80211 stops queues, but we'll want to let mac80211 know not to stop queues for proper multi-link support during CSA, so we need to handle this case. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.d5d629f32ea8.I86d9b849d92273542bfc2d9c671b66179e7ebb72@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: support wowlan notif version 4Shaul Triebitz2-6/+243
In version 4, in case of MLO GTK rekey during D3, the firmware sends all the new keys, including the keys on the non-active links. Update also the non active link keys. Signed-off-by: Shaul Triebitz <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.6524de988ed3.Id065ddd2f4a71b0243c33ae0c5476ac41bfe2dc2@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: skip keys of other linksShaul Triebitz1-0/+8
When waking up from wowlan, we iterate over the current keys and remove those that were rekeyed. With MLO, there might be keys of other links which should not be removed. Skip MLO keys on other links (other than the wowlan active link). Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.fdf527b50d61.I605a971d2d68107769dd363b896b471998259e64@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: stop assuming sta id 0 in d3Shaul Triebitz1-2/+7
In MLO, the station id in d3 can be other than 0. Do not assume the station id is 0 when waking up from d3. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.6379619f2987.I83de9d868224df76eee8df8dbcf352636535821a@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: fix the sta id in offloadShaul Triebitz3-4/+10
With MLO, the station id in wowlan can be other than 0. Set the correct station in the protocol offload command. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.ace4f793872d.Id984110576a72acc84493217ca95564c3cd362bd@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: Move beacon filtering to be per linkIlan Peer6-57/+70
As the FW statistics are per link context and not per MAC context. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.47bdecc68e73.Icc0eaebb35d119f8c538c068fbc8f874aac194c3@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: fix firmware API kernel docShaul Triebitz1-2/+2
Fix the comment of the associated struct of the wowlan info notification. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.2ea25f49489b.I83fa1cdc39f74ad2aacf75c2c14412eeaf93e787@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: include link ID when releasing framesBenjamin Berg1-12/+8
When releasing frames from the reorder buffer, the link ID was not included in the RX status information. This subsequently led mac80211 to drop the frame. Change it so that the link information is set immediately when possible so that it doesn't not need to be filled in anymore when submitting the frame to mac80211. Fixes: b8a85a1d42d7 ("wifi: iwlwifi: mvm: rxmq: report link ID to mac80211") Signed-off-by: Benjamin Berg <[email protected]> Tested-by: Emmanuel Grumbach <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240320232419.bbbd5e9bfe80.Iec1bf5c884e371f7bc5ea2534ed9ea8d3f2c0bf6@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: handle debugfs names more carefullyJohannes Berg1-4/+7
With debugfs=off, we can get here with the dbgfs_dir being an ERR_PTR(). Instead of checking for all this, which is often flagged as a mistake, simply handle the names here more carefully by printing them, then we don't need extra checks. Also, while checking, I noticed theoretically 'buf' is too small, so fix that size as well. Cc: [email protected] Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218422 Fixes: c36235acb34f ("wifi: iwlwifi: mvm: rework debugfs handling") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240320232419.4dc1eb3dd015.I32f308b0356ef5bcf8d188dd98ce9b210e3ab9fd@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: guard against invalid STA ID on removalBenjamin Berg1-1/+6
Guard against invalid station IDs in iwl_mvm_mld_rm_sta_id as that would result in out-of-bounds array accesses. This prevents issues should the driver get into a bad state during error handling. Signed-off-by: Benjamin Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240320232419.d523167bda9c.I1cffd86363805bf86a95d8bdfd4b438bb54baddc@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: read txq->read_ptr under lockJohannes Berg1-1/+1
If we read txq->read_ptr without lock, we can read the same value twice, then obtain the lock, and reclaim from there to two different places, but crucially reclaim the same entry twice, resulting in the WARN_ONCE() a little later. Fix that by reading txq->read_ptr under lock. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.bf4c62196504.I978a7ca56c6bd6f1bf42c15aa923ba03366a840b@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: fw: don't always use FW dump trigJohannes Berg1-7/+8
Since the dump_data (struct iwl_fwrt_dump_data) is a union, it's not safe to unconditionally access and use the 'trig' member, it might be 'desc' instead. Access it only if it's known to be 'trig' rather than 'desc', i.e. if ini-debug is present. Cc: [email protected] Fixes: 0eb50c674a1e ("iwlwifi: yoyo: send hcmd to fw after dump collection completes.") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.e2976bc58b29.I72fbd6135b3623227de53d8a2bb82776066cb72b@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: rfi: fix potential response leaksJohannes Berg1-2/+6
If the rx payload length check fails, or if kmemdup() fails, we still need to free the command response. Fix that. Fixes: 21254908cbe9 ("iwlwifi: mvm: add RFI-M support") Co-authored-by: Anjaneyulu <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240319100755.db2fa0196aa7.I116293b132502ac68a65527330fa37799694b79c@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FWIlan Peer3-14/+56
In the non MLD firmware flows, although the deflink is used, the mapping of link ID to BSS configuration was missing, which causes flows that need this mapping to crash. Fix this by adding the link ID to BSS configuration mapping to non MLD flows as well. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.0b5c361e8f0c.Ib11f41815d2efa5d1ec57f855de4c8563142987b@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: consider having one active linkShaul Triebitz1-7/+9
Do not call iwl_mvm_mld_get_primary_link if only one link is active. In that case, the sole active link should be used. iwl_mvm_mld_get_primary_link returns -1 if only one link is active causing a warning. Fixes: 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.6c50061bf69b.I05b0ac7fa7149eabaa5570a6f65b0d9bfb09a6f1@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: pick the version of SESSION_PROTECTION_NOTIFEmmanuel Grumbach1-3/+2
When we want to know whether we should look for the mac_id or the link_id in struct iwl_mvm_session_prot_notif, we should look at the version of SESSION_PROTECTION_NOTIF. This causes WARNINGs: WARNING: CPU: 0 PID: 11403 at drivers/net/wireless/intel/iwlwifi/mvm/time-event.c:959 iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] RIP: 0010:iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] Code: 00 49 c7 84 24 48 07 00 00 00 00 00 00 41 c6 84 24 78 07 00 00 ff 4c 89 f7 e8 e9 71 54 d9 e9 7d fd ff ff 0f 0b e9 23 fe ff ff <0f> 0b e9 1c fe ff ff 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffb4bb00003d40 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9ae63a361000 RCX: ffff9ae4a98b60d4 RDX: ffff9ae4588499c0 RSI: 0000000000000305 RDI: ffff9ae4a98b6358 RBP: ffffb4bb00003d68 R08: 0000000000000003 R09: 0000000000000010 R10: ffffb4bb00003d00 R11: 000000000000000f R12: ffff9ae441399050 R13: ffff9ae4761329e8 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9ae7af400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055fb75680018 CR3: 00000003dae32006 CR4: 0000000000f70ef0 PKRU: 55555554 Call Trace: <IRQ> ? show_regs+0x69/0x80 ? __warn+0x8d/0x150 ? iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] ? report_bug+0x196/0x1c0 ? handle_bug+0x45/0x80 ? exc_invalid_op+0x1c/0xb0 ? asm_exc_invalid_op+0x1f/0x30 ? iwl_mvm_rx_session_protect_notif+0x333/0x340 [iwlmvm] iwl_mvm_rx_common+0x115/0x340 [iwlmvm] iwl_mvm_rx_mq+0xa6/0x100 [iwlmvm] iwl_pcie_rx_handle+0x263/0xa10 [iwlwifi] iwl_pcie_napi_poll_msix+0x32/0xd0 [iwlwifi] Fixes: 085d33c53012 ("wifi: iwlwifi: support link id in SESSION_PROTECTION_NOTIF") Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240311081938.39d5618f7b9d.I564d863e53c6cbcb49141467932ecb6a9840b320@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-25wifi: iwlwifi: mvm: disable MLO for the time beingJohannes Berg1-1/+1
MLO ended up not really fully stable yet, we want to make sure it works well with the ecosystem before enabling it. Thus, remove the flag, but set WIPHY_FLAG_DISABLE_WEXT so we don't get wireless extensions back until we enable MLO for this hardware. Cc: [email protected] Reviewed-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240314110951.d6ad146df98d.I47127e4fdbdef89e4ccf7483641570ee7871d4e6@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-13Merge tag 'thermal-6.9-rc1' of ↵Linus Torvalds2-41/+34
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These mostly change the thermal core in a few ways allowing thermal drivers to be simplified, in particular in their removal and failing probe handling parts that are notoriously prone to errors, and propagate the changes to several drivers. Apart from that, support for a new platform is added (Intel Lunar Lake-M), some bugs are fixed and some code is cleaned up, as usual. Specifics: - Store zone trips table and zone operations directly in struct thermal_zone_device (Rafael Wysocki) - Fix up flex array initialization during thermal zone device registration (Nathan Chancellor) - Rework writable trip points handling in the thermal core and several drivers (Rafael Wysocki) - Thermal core code cleanups (Dan Carpenter, Flavio Suligoi) - Use thermal zone accessor functions in the int340x Intel thermal driver (Rafael Wysocki) - Add Lunar Lake-M PCI ID to the int340x Intel thermal driver (Srinivas Pandruvada) - Minor fixes for thermal governors (Rafael Wysocki, Di Shen) - Trip point handling fixes for the iwlwifi wireless driver (Rafael Wysocki) - Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno)" * tag 'thermal-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits) thermal: core: remove unnecessary check in trip_point_hyst_store() thermal: intel: int340x_thermal: Use thermal zone accessor functions thermal: core: Remove excess empty line from a comment thermal: int340x: processor_thermal: Add Lunar Lake-M PCI ID thermal: core: Eliminate writable trip points masks thermal: of: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: imx: Set THERMAL_TRIP_FLAG_RW_TEMP directly wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directly mlxsw: core_thermal: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: intel: Set THERMAL_TRIP_FLAG_RW_TEMP directly thermal: core: Drop the .set_trip_hyst() thermal zone operation thermal: core: Add flags to struct thermal_trip thermal: core: Move initial num_trips assignment before memcpy() thermal: Get rid of CONFIG_THERMAL_WRITABLE_TRIPS thermal: intel: Adjust ops handling during thermal zone registration thermal: ACPI: Constify acpi_thermal_zone_ops thermal: core: Store zone ops in struct thermal_zone_device thermal: intel: Discard trip tables after zone registration thermal: ACPI: Discard trips table after zone registration thermal: core: Store zone trips table in struct thermal_zone_device ...
2024-03-08Merge tag 'wireless-next-2024-03-08' of ↵Jakub Kicinski5-8/+28
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.9 The fourth "new features" pull request for v6.9 with changes both in stack and in drivers. The theme in this pull request is to fix sparse warnings but we still have some left in wireless subsystem. Otherwise quite normal. Major changes: rtw89 * NL80211_EXT_FEATURE_SCAN_RANDOM_SN support * NL80211_EXT_FEATURE_SET_SCAN_DWELL support rtw88 * support for more rtw8811cu and rtw8821cu devices mt76 * mt76x2u: add Netgear WNDA3100v3 USB * mt7915: newer ADIE version support * mt7925: radio temperature sensor support * mt7996: remove GCMP IGTK offload * tag 'wireless-next-2024-03-08' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (125 commits) wifi: rtw89: wow: move release offload packet earlier for WoWLAN mode wifi: rtw89: wow: set security engine options for 802.11ax chips only wifi: rtw89: update suspend/resume for different generation wifi: rtw89: wow: update config mac function with different generation wifi: rtw89: update DMA function with different generation wifi: rtw89: wow: update WoWLAN status register for different generation wifi: rtw89: wow: update WoWLAN reason register for different chips wifi: brcm80211: handle pmk_op allocation failure wifi: rtw89: coex: Add coexistence policy to decrease WiFi packet CRC-ERR wifi: rtw89: coex: When Bluetooth not available don't set power/gain wifi: rtw89: coex: add return value to ensure H2C command is success or not wifi: rtw89: coex: Reorder H2C command index to align with firmware wifi: rtw89: coex: add BTC ctrl_info version 7 and related logic wifi: rtw89: coex: add init_info H2C command format version 7 wifi: rtw89: 8922a: add coexistence helpers of SW grant wifi: rtw89: mac: add coexistence helpers {cfg/get}_plt wifi: cw1200: restore endian swapping wifi: wlcore: sdio: Rate limit wl12xx_sdio_raw_{read,write}() failures warns wifi: rtlwifi: Remove rtl_intf_ops.read_efuse_byte wifi: rtw88: 8821c: Fix false alarm count ... ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-04wifi: mac80211: pass link conf to abort_channel_switchJohannes Berg2-3/+13
Pass the link conf to the abort_channel_switch driver method so the driver can handle things correctly. Reviewed-by: Emmanuel Grumbach <[email protected]> Reviewed-by: Miriam Rachel Korenblit <[email protected]> Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-04wifi: mac80211: add link id to ieee80211_gtk_rekey_add()Shaul Triebitz1-5/+7
In MLO, we need the link id in the GTK key to be given by the driver after rekeying in wowlan, so add that. Signed-off-by: Shaul Triebitz <[email protected]> Reviewed-by: Miriam Rachel Korenblit <[email protected]> Link: https://msgid.link/20240228094500.ce1bfc83a680.I43a6f8ab2804ee07116a37d5b9ec601b843464b1@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-03-04wifi: iwlwifi: Add missing MODULE_FIRMWARE() for *.pnvmTakashi Iwai2-0/+8
A few models require *.pnvm files while we don't declare them via MODULE_FIRMWARE(). This resulted in the breakage of WiFi on the system that relies on the information from modinfo (e.g. openSUSE installer image). This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm files. type=feature ticket=none Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1207553 Signed-off-by: Takashi Iwai <[email protected]> Link: https://msgid.link/[email protected] [move to appropriate files] Signed-off-by: Miri Korenblit <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2024-03-04net: adopt skb_network_header_len() more broadlyEric Dumazet3-4/+3
(skb_transport_header(skb) - skb_network_header(skb)) can be replaced by skb_network_header_len(skb) Add a DEBUG_NET_WARN_ON_ONCE() in skb_network_header_len() to catch cases were the transport_header was not set. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-02-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-5/+66
Cross-merge networking fixes after downstream PR. Conflicts: net/mptcp/protocol.c adf1bb78dab5 ("mptcp: fix snd_wnd initialization for passive socket") 9426ce476a70 ("mptcp: annotate lockless access for RX path fields") https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/dpll/dpll_core.c 0d60d8df6f49 ("dpll: rely on rcu for netdev_dpll_pin()") e7f8df0e81bf ("dpll: move xa_erase() call in to match dpll_pin_alloc() error path order") drivers/net/veth.c 1ce7d306ea63 ("veth: try harder when allocating queue memory") 0bef512012b1 ("net: add netdev_lockdep_set_classes() to virtual drivers") drivers/net/wireless/intel/iwlwifi/mvm/d3.c 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") 78f65fbf421a ("wifi: iwlwifi: mvm: ensure offloading TID queue exists") net/wireless/nl80211.c f78c1375339a ("wifi: nl80211: reject iftype change with mesh ID change") 414532d8aa89 ("wifi: cfg80211: use IEEE80211_MAX_MESH_ID_LEN appropriately") Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-27thermal: core: Eliminate writable trip points masksRafael J. Wysocki1-1/+0
All of the thermal_zone_device_register_with_trips() callers pass zero writable trip points masks to it, so drop the mask argument from that function and update all of its callers accordingly. This also removes the artificial trip points per zone limit of 32, related to using writable trip points masks. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]>
2024-02-27wifi: iwlwifi: mvm: Set THERMAL_TRIP_FLAG_RW_TEMP directlyRafael J. Wysocki1-4/+2
It is now possible to flag trip points with THERMAL_TRIP_FLAG_RW_TEMP to allow their temperature to be set from user space via sysfs instead of using a nonzero writable trips mask during thermal zone registration, so make the iwlwifi code do that. No intentional functional impact. Note that this change is requisite for dropping the mask argument from thermal_zone_device_register_with_trips() going forward. Signed-off-by: Rafael J. Wysocki <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]>
2024-02-23Merge branch 'thermal-core'Rafael J. Wysocki2-37/+33
Merge thermal core changes for 6.9: - Minor fixes for thermal governors (Rafael J. Wysocki, Di Shen). - Trip point handling fixes for the iwlwifi wireless driver (Rafael J. Wysocki). - Code cleanups (Rafael J. Wysocki, AngeloGioacchino Del Regno). * thermal-tmp: thermal: gov_power_allocator: Avoid overwriting PID coefficients from setup time thermal: sysfs: Fix up white space in trip_point_temp_store() iwlwifi: mvm: Use for_each_thermal_trip() for walking trip points iwlwifi: mvm: Populate trip table before registering thermal zone iwlwifi: mvm: Drop unused fw_trips_index[] from iwl_mvm_thermal_device thermal: core: Change governor name to const char pointer thermal: gov_bang_bang: Fix possible cooling device state ping-pong thermal: gov_fair_share: Fix dependency on trip points ordering
2024-02-21wifi: iwlwifi: load b0 version of ucode for HR1/HR2Mukesh Sisodiya1-1/+2
load b0 version of ucode for both a0 and b0 step of HR RF. Signed-off-by: Mukesh Sisodiya <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240218194912.0166f5d2d5d2.I34c1d46aefd70b34c1c75cea67792bc5ec8bc285@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-21wifi: iwlwifi: handle per-phy statistics from fwMiri Korenblit2-1/+17
In the operational statistics notifications (both old and new API) the driver receives the statistics per phy. currently this statistics wasn't handled because they wasn't needed. Now the channel_load_by_us parameter in these statistics will be used for the link grading calculation (implemented in another patch), so store its value in phy_ctxt. Signed-off-by: Miri Korenblit <[email protected]> Reviewed-by: Johannes Berg <[email protected]> Link: https://msgid.link/20240218194912.e84f975b69ee.Ibbc7817135827e45adaaa47b796be165f9f1ca48@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-21wifi: iwlwifi: iwl-fh.h: fix kernel-doc issuesJohannes Berg1-16/+20
Clean up kernel-doc in iwl-fh.h. In one case, rename the (otherwise unused) struct member to have the correct name. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240218194912.4a342ac06f0b.I604ea964a094b43df0ab29b06231c2f42d6bd79b@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-21wifi: iwlwifi: api: fix kernel-doc referenceJohannes Berg1-2/+2
This is for iwl_tas_config_cmd_v4, not iwl_tas_config_cmd_v3. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240218194912.5475d49bce86.I640a12bc799612e82c3e7a4d628bbb7760511297@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-21wifi: iwlwifi: mvm: unlock mvm if there is no primary linkBenjamin Berg1-2/+4
At that point in the code mvm->mutex has already been taken, so jump to out_noreset in order to unlock before returning the error. Fixes: 8c9bef26e98b ("wifi: iwlwifi: mvm: d3: implement suspend with MLO") Signed-off-by: Benjamin Berg <[email protected]> Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240218194912.21de6e68d9e5.I3c0ebe577dec6b26ab6b4eac48035d6f35a8b0f8@changeid Signed-off-by: Johannes Berg <[email protected]>
2024-02-21wifi: iwlwifi: bump FW API to 90 for BZ/SC devicesMiri Korenblit2-2/+2
Start supporting API version 90 for new devices. Signed-off-by: Miri Korenblit <[email protected]> Link: https://msgid.link/20240218194912.21cf0b641f12.I2f9196191f1ea78e96e92f9db8ecb3cc9bbfd9b3@changeid Signed-off-by: Johannes Berg <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.