aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel
AgeCommit message (Collapse)AuthorFilesLines
2019-11-20iwlwifi: pcie: fix support for transmitting SKBs with fraglistJohannes Berg1-0/+14
When the implementation of SKBs with fraglist was sent upstream, a merge-damage occurred and half the patch was not applied. This causes problems in high-throughput situations with AX200 devices, including low throughput and FW crashes. Introduce the part that was missing from the original patch. Fixes: 0044f1716c4d ("iwlwifi: pcie: support transmitting SKBs with fraglist") Cc: [email protected] # 4.20+ Signed-off-by: Johannes Berg <[email protected]> [ This patch was created by me, but the original author of this code is Johannes, so his s-o-b is here and he's marked as the author of the patch. ] Signed-off-by: Luca Coelho <[email protected]>
2019-11-20ipw2x00: remove set but not used variable 'force_update'zhengbin1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/intel/ipw2x00/ipw2100.c: In function shim__set_security: drivers/net/wireless/intel/ipw2x00/ipw2100.c:5582:9: warning: variable force_update set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <[email protected]> Signed-off-by: zhengbin <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-20ipw2x00: remove set but not used variable 'reason'zhengbin1-3/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/wireless/intel/ipw2x00/ipw2200.c: In function ipw_wx_set_mlme: drivers/net/wireless/intel/ipw2x00/ipw2200.c:6805:9: warning: variable reason set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <[email protected]> Signed-off-by: zhengbin <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-13/+7
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <[email protected]>
2019-11-15iwlwifi: mvm: fix non-ACPI functionJohannes Berg1-6/+1
The code now compiles without ACPI, but there's a warning since iwl_mvm_get_ppag_table() isn't used, and iwl_mvm_ppag_init() must not unconditionally fail but return success instead. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: 22000: fix some indentationJohannes Berg1-15/+15
Somehow two tabs snuck into this file where just one should be used, fix that. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: remove IWL_DEVICE_22560/IWL_DEVICE_FAMILY_22560Johannes Berg16-106/+45
This is dead code, nothing uses the IWL_DEVICE_22560 macro and thus nothing every uses IWL_DEVICE_FAMILY_22560. Remove it all. While at it, remove some code and definitions used only in this case, and clean up some comments/names that still refer to it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: sync the iwl_mvm_session_prot_notif layoutEmmanuel Grumbach1-1/+3
The firmware API has changed a little bit but this change has no impact on the flow and is backward compatible. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: start CTDP budget from 2400mAMordechay Goodstein1-20/+23
The current budget of 2000mA is preventing us from reaching maximum throughput. According to our system engineers, we can increase the maximum budget to 2400mA to solve this problem. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: don't skip mgmt tid when flushing all tidsHaim Dreyfuss3-3/+4
There are various of flows which require tids flushing (disconnection, suspend, etc...). Currently, when the driver instructs the FW to flush he masks all the data tids(0-7). However, the driver doesn't set the management tid (#15) which cause the FW not to flush it. When the FW tries to remove the mgmt queue he throws an assert since it is not an empty queue. instead of just set only the data tids set everything and let the FW ignore the invalid tids. Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: scan: enable adaptive dwell in p2pShahar S Matityahu1-4/+2
Align to the requirement update and support adaptive dwell in p2p scan. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: refactor the SAR tables from mvm to acpiIhab Zhaika6-338/+433
Refactored the SAR related functions from iwlmvm to acpi in order to make it shared between different opmodes in addition to removing unused variable ppag_rev. Signed-off-by: Ihab Zhaika <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: scan: support scan req cmd ver 12Shahar S Matityahu2-0/+228
Implement scan request command version 12. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: scan: make new scan req versioning flowShahar S Matityahu3-162/+208
Implement a new versioning handling flow supported from version 11 onwards. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: fix unaligned read of rx_pkt_statusWang Xuerui1-1/+2
This is present since the introduction of iwlmvm. Example stack trace on MIPS: [<ffffffffc0789328>] iwl_mvm_rx_rx_mpdu+0xa8/0xb88 [iwlmvm] [<ffffffffc0632b40>] iwl_pcie_rx_handle+0x420/0xc48 [iwlwifi] Tested with a Wireless AC 7265 for ~6 months, confirmed to fix the problem. No other unaligned accesses are spotted yet. Signed-off-by: Wang Xuerui <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: remove redundant assignment to variable bufszColin Ian King1-1/+1
The variable bufsz is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: bump FW API to 51 for 22000 seriesLuca Coelho1-1/+1
Start supporting API version 51 for 22000 series. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: FW API: reference enum in docs of modify_maskJohannes Berg1-6/+4
Add a reference to the correct enum rather than showing the pattern of the actual constants. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: print rate_n_flags in a pretty formatMordechay Goodstein2-5/+7
Use the rs_pretty_print_rate() function to print the rate_n_flags in more human-readable format. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: scan: adapt the code to use api ver 11Tova Mussai4-6/+380
FW scan api ver 11 adds support for some new features, in this version the fw did also some cleanup in the api, which causes the driver not to be able to use the current scan req struct. Therefore, in this patch the driver has new version for the scan command code Signed-off-by: Tova Mussai <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: scan: Create function to build scan cmdTova Mussai1-15/+17
Currently, the code to build scan cmd is duplicated in iwl_mvm_reg_scan_start and iwl_mvm_sched_scan_start. Create a function to build this command, and call the function instead. Signed-off-by: Tova Mussai <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: scan: create function for scan scheduling paramsTova Mussai1-23/+38
In the next patch, this code will be used from different places. As preparation export this code into function. Signed-off-by: Tova Mussai <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: dbg_ini: support dump collection upon assert during D3Shahar S Matityahu1-0/+2
add assert time point in the D3 resume flow in case there was an assert during D3. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: pcie: make iwl_pcie_gen2_update_byte_tbl staticEmmanuel Grumbach2-6/+3
It is called within tx-gen2.c only. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: in VHT connection use only VHT capabilitiesMordechay Goodstein3-1/+5
mac80211 limits amsdu size to the minimum of HT and VHT capabilities but since in a VHT connection we don't transmit HT frames we can discard HT limits. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: nvm: update iwl_uhb_nvm_channelsTova Mussai1-5/+4
Change the UHB channels to start from 1 to match the specs (11ax Draft 5.0). Signed-off-by: Tova Mussai <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: remove else-if in iwl_send_phy_cfg_cmd()Luca Coelho1-2/+3
We return in the if block, so it's unnecessary to have an else statement. Remove it. Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-15iwlwifi: mvm: fix support for single antenna diversityLuca Coelho1-4/+16
When the single antenna diversity support was sent upstream, only some definitions were sent, due to a bad revert. Fix this by adding the actual code. Fixes: 5952e0ec3f05 ("iwlwifi: mvm: add support for single antenna diversity") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-08iwlwifi: pcie: don't consider IV len in A-MSDUMordechay Goodstein1-13/+7
From gen2 PN is totally offloaded to hardware (also the space for the IV isn't part of the skb). As you can see in mvm/mac80211.c:3545, the MAC for cipher types CCMP/GCMP doesn't set IEEE80211_KEY_FLAG_PUT_IV_SPACE for gen2 NICs. This causes all the AMSDU data to be corrupted with cipher enabled. Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-06iwlegacy: Remove redundant variable "ret"zhong jiang1-2/+1
local variable "ret" is not used. hence it is safe to remove and just return 0. Signed-off-by: zhong jiang <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-06ipw2x00: Remove redundant variable "rc"zhong jiang1-3/+1
local variable "rc" is not used. It is safe to remove and There is only one caller of libipw_qos_convert_ac_to_parameters(). hence make it void Signed-off-by: zhong jiang <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-11-05Merge tag 'wireless-drivers-next-2019-11-05' of ↵David S. Miller40-910/+2559
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/[email protected] Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller <[email protected]>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller9-134/+239
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <[email protected]>
2019-10-30iwlwifi: fw api: support new API for scan config cmdAyala Beker4-10/+61
The API was reduced to include only knowledge currently needed by the FW scan logic, the rest is legacy. Support the new, reduced version. Using the old API with newer firmwares (starting from iwlwifi-*-50.ucode, which implements and requires the new API version) causes an assertion failure similar to this one: [ 2.854505] iwlwifi 0000:00:14.3: 0x20000038 | BAD_COMMAND Signed-off-by: Ayala Beker <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2019-10-28net: Fix misspellings of "configure" and "configuration"Geert Uytterhoeven1-1/+1
Fix various misspellings of "configuration" and "configure". Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-10-25iwlwifi: rx: use new api to get band from rx mpduTova Mussai4-2/+34
The FW introduce new API to get the band from the rx mpdu, use this new API. Signed-off-by: Tova Mussai <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: nvm: create function to convert channel index to nl80211_bandTova Mussai1-9/+17
Create function to convert channel index to nl80211_band and use it. Signed-off-by: Tova Mussai <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: mvm: Invert the condition for OFDM rateTova Mussai3-7/+9
OFDM rate used for all bands except to band 2.4 which use CCK rate. Inverting the condition help that in future we won't need to expand the condition for more bands. Signed-off-by: Tova Mussai <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: mvm: create function to convert nl80211 band to phy bandTova Mussai3-20/+25
Create the function and use it. Signed-off-by: Tova Mussai <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: dbg_ini: use vzalloc to allocate dumping memory regionsShahar S Matityahu1-6/+6
During dump flow, the driver allocates spaces to store the memory regions that will be included in the dump. These regions can be very large so in order to avoid allocation failure, use vzalloc instead. The kmalloc uses GFP_KERNEL and the driver does not make any use of the fact that the memory is contiguous so the same functionality is maintained. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: dbg_ini: add user trigger supportShahar S Matityahu1-0/+3
Allow to fire user trigger in ini mode Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: mvm: add notification for missed VAPLior Cohen3-0/+44
A missed VAP notification will be sent from umac when the station is out of sync with its associated non-transmitted BSSID. The notification will be sent only if the transmitted BSSID is an EMA-AP one. The driver will consider this notification as connection loss. Signed-off-by: Lior Cohen <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: mvm: fix old-style declarationYueHaibing1-2/+2
There expect the 'static' keyword to come first in a declaration, and we get warnings like this with "make W=1": drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:427:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:434:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] Reported-by: Hulk Robot <[email protected]> Signed-off-by: YueHaibing <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: mvm: use the new session protection commandEmmanuel Grumbach7-11/+331
The firmware has now a new session protection command. This new API allows the firmware to manage the protection needed for association. It'll also remove the event when the association is complete. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: mvm: remove leftover rs_remove_sta_debugfs() prototypeJohannes Berg1-4/+0
This prototype is no longer used, remove it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: mvm: add support for new version for D0I3_END_CMDHaim Dreyfuss4-1/+67
During D3 state there are some flows which requires FW reset. Add new API to support it. Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: mvm: consider ieee80211 station max amsdu valueMordechay Goodstein2-2/+13
debugfs amsdu_len sets only the max_amsdu_len for ieee80211 station so take it into consideration while getting max amsdu Fixes: af2984e9e625 ("iwlwifi: mvm: add a debugfs entry to set a fixed size AMSDU for all TX packets") Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: dbg_ini: support FW notification dumping in case of missed beaconShahar S Matityahu2-1/+3
Pass the FW notification packet to the dump collection flow to allow the driver to include it in the dump file if requested. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: dbg_ini: remove old API and some related codeShahar S Matityahu3-250/+2
Remove unused code of the old debug ini API. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-10-25iwlwifi: dbg_ini: rename external debug configuration fileShahar S Matityahu1-1/+1
Rename the external configuration file to align to the debug SAS. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.