aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi
AgeCommit message (Collapse)AuthorFilesLines
2017-06-23iwlwifi: remove resp_pkt NULL checksJohannes Berg5-24/+3
Contrary to what some of the comments say, if rfkill was asserted the transport will return -ERFKILL instead of success, if CMD_WANT_SKB was set, so it's not necessary to check cmd.resp_pkt for being NULL if the return code was success. Validate that this is true in iwl_trans_send_cmd(). Most of the other code modifications were done with the following spatch: @@ struct iwl_host_cmd cmd; identifier pkt; @@ <... ( pkt = cmd.resp_pkt; ... -if (!pkt) { ... } | pkt = cmd.resp_pkt; ... -if (WARN_ON(!pkt)) { ... } | -if (!cmd.resp_pkt) { ... } ) ...> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-23iwlwifi: mvm: remove txq EMPTYING_DELBA state for DQALiad Kaufman1-2/+7
In DQA mode, there is no need to wait for the TXQ to clear out after getting a DELBA, since traffic can continue running on the queue. Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-16networking: introduce and use skb_put_data()Johannes Berg7-13/+10
A common pattern with skb_put() is to just want to memcpy() some data into the new space, introduce skb_put_data() for this. An spatch similar to the one for skb_put_zero() converts many of the places using it: @@ identifier p, p2; expression len, skb, data; type t, t2; @@ ( -p = skb_put(skb, len); +p = skb_put_data(skb, data, len); | -p = (t)skb_put(skb, len); +p = skb_put_data(skb, data, len); ) ( p2 = (t2)p; -memcpy(p2, data, len); | -memcpy(p, data, len); ) @@ type t, t2; identifier p, p2; expression skb, data; @@ t *p; ... ( -p = skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); | -p = (t *)skb_put(skb, sizeof(t)); +p = skb_put_data(skb, data, sizeof(t)); ) ( p2 = (t2)p; -memcpy(p2, data, sizeof(*p)); | -memcpy(p, data, sizeof(*p)); ) @@ expression skb, len, data; @@ -memcpy(skb_put(skb, len), data, len); +skb_put_data(skb, data, len); (again, manually post-processed to retain some comments) Reviewed-by: Stephen Hemminger <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-12Merge tag 'iwlwifi-next-for-kalle-2017-06-06' of ↵Kalle Valo52-641/+1744
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi driver patches 4.13 * Loads of FW API documentation improvements (for tools and htmldoc); * Continued work for the new A000 family; * Bumped the maximum supported FW API to 31; * Improve the differentiation between 8000, 9000 and A000 families; * A lot of fixes and cleanups here and there; kvalo: There were conflicts iwl_mvm_stop_device() and iwl_mvm_tcool_set_cur_state(). The former was easy but latter needed more thought. Apparently the mutex was taken too late, so I fixed so that the mutex is taken first and then check for iwl_mvm_firmware_running().
2017-06-05iwlwifi: remove unnecessary code in iwl_trans_alloc_tx_cmdLuca Coelho1-7/+1
When we removed dev_cmd_headroom, the check for dev_cmd_ptr == NULL became unnecessary, since we just return dev_cmd_ptr anyway. Cleanup the function to avoid useless code. Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: bump max FW API to 31Luca Coelho3-4/+4
Bump the maximum accepted firmware API number for devices in the 8000, 9000 and A000 families. Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: fw-api: cleanup cycle includesMordechai Goodstein2-4/+0
The include in the deleted file are included in the fw-api.h file. Which caused a cycle include in the dependencies. Signed-off-by: Mordechai Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: remove SCAN_GROUPJohannes Berg1-1/+0
The firmware no longer uses this command group, so remove it from the driver as well. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: link to TX commands in documentationJohannes Berg1-1/+3
Link from the TX_CMD enum value to the TX command structs. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: document structures used for BEACON_TEMPLATE_CMDJohannes Berg1-0/+6
Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: link queue cmd docs to A000 command structsJohannes Berg1-1/+3
Document which structures are used with the command for the A000 hardware flavour. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: split firmware API from iwl-trans.hJohannes Berg2-136/+206
In order to more clearly document which parts of this file are firmware API and which are something else, split the firmware API into a separate file to include here. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: fix a kernel-doc tagJohannes Berg1-1/+1
The kernel-doc here is on an enum, so don't tag it as struct but correctly as enum instead, preventing an error. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: clear firmware running bit earlierJohannes Berg1-0/+11
Clear the firmware running bit before flushing the FW (error) dump work, because otherwise debugfs isn't blocked (previous patch) and can cause a new work to be scheduled, which will then run after we actually shut down the device, wreaking havoc. Clearing it ensures that debugfs can't interfere anymore, and we can safely cancel or flush the work struct. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: convert ucode_loaded to a status bitJohannes Berg2-5/+5
Convert ucode_loaded to a status bit called FIRMWARE_RUNNING. This will make it easier to clear this earlier, to avoid any spurious accesses while shutting down, for example through debugfs. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: add and use iwl_mvm_device_running()Johannes Berg4-15/+30
This will help refactor this later. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: use schedule_delayed_work()Johannes Berg4-8/+7
There's no need to refer to system_wq directly, use the provided wrapper schedule_delayed_work(). Made with the following spatch: @@ expression E,F; @@ -queue_delayed_work(system_wq, E, F); +schedule_delayed_work(E, F); Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: check firmware is up in debugfsJohannes Berg1-6/+49
Protect various debugfs files that need to communicate with the firmware from being used when the firmware isn't running. Some will just reject getting written to, while others that store some state will simply store it and not apply it immediately. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: disable prph collection in a000 hwLiad Kaufman1-10/+13
Apart from the current list of PRPH that can't be collected in A000 HW, the rest of the debug dump data the driver collects is valid, so there is no need to disable collection only because of this. Disable PRPH collecting in A000 HW, and allow collecting the rest of the debug data. Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: pcie: support dumping FH in a000 hwLiad Kaufman2-3/+17
FH in A000 HW are placed in a different location, and need to be read as prph, rather than direct. Support A000 dumping as well as legacy. Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: add 9000 and A000 device familiesSara Sharon11-25/+29
Add two new device families to differentiate them from 8000. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: support init flow debuggingLiad Kaufman7-6/+42
In case an assert happens on init flow, the current driver powers down the NIC, except if iwlmvm modparam init_dbg=1, and only on very specific flows. Extend this capability to cover most failure cases by keeping track of what init configurations have been completed. This way, we can allow NOT powering down the NIC, while making sure that when the driver is removed we don't try to free resources that haven't been allocated. (This can result in a kernel panic.) Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: add TLV for NAN API differentiationBeni Lev1-0/+2
Due to NAN FW API change, add TLV in order to distiguish between the 2 API versions Signed-off-by: Beni Lev <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: add dbgc_supported to transport configurationSara Sharon4-4/+8
Use transport configuration to determine DBGC support instead of relying on device family. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: remove references to 8000 B-step devicesSara Sharon4-36/+2
We don't have any 8000 B-step right now, and there is no firmware loading code for them anyway. Further more, 9000 B-step devices will hit those code paths. Remove code that was introduced only for 8000 B-step. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: cleanup references to 8000 family in NVM codeSara Sharon8-74/+70
NVM code is tightly coupled with 8000 family, while it really refers to extended NVM format introduced back then. Separate it to a configuration dependent boolean, and rename defines accordingly. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: pcie: add AMSDU to gen2Sara Sharon3-6/+172
This is essentially the same code as gen1, except that it uses gen2 functions and SW checksum is not included. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: document RX structuresJohannes Berg2-5/+84
Document the structures used in RX and link them to the command ID. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: add AMSDU flag to offload assistSara Sharon1-1/+7
Enable offload assist for AMSDU when the AMSDU present flag is set. Fixes: a830baba9c2e ("iwlwifi: mvm: support new TX API") Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: fix host command memory leaksShahar S Matityahu1-3/+6
Sending host command with CMD_WANT_SKB flag demands the release of the response buffer with iwl_free_resp function. The patch adds the memory release in all the relevant places Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265Luca Coelho2-4/+4
In a previous commit, we removed support for API versions earlier than 22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were set to 17. Fix that. Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22") Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: clear new beacon command template structJohannes Berg1-1/+1
Clear the struct so that all reserved fields are zero when we send the struct down to the device. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: don't fail when removing a key from an inexisting staLuca Coelho1-8/+5
The iwl_mvm_remove_sta_key() function handles removing a key when the sta doesn't exist anymore. Mistakenly, this was changed to return an error while fixing another bug. If the mvm_sta doesn't exist, we continue normally, but just don't try to remove the igtk key. Fixes: cd4d23c1ea9b ("iwlwifi: mvm: Fix removal of IGTK") Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3Luca Coelho1-2/+4
We only need to handle d0i3 entry and exit during suspend resume if system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry failures will cause suspend to fail. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791 Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: fix firmware debug restart recordingEmmanuel Grumbach4-19/+27
When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: tt: move ucode_loaded check under mutexJohannes Berg1-3/+5
The ucode_loaded check should be under the mutex, since it can otherwise change state after we looked at it and before we got the mutex. Fix that. Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: support ibss in dqa modeLiad Kaufman1-1/+12
Allow working IBSS also when working in DQA mode. This is done by setting it to treat the queues the same as a BSS AP treats the queues. Fixes: 7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode") Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: Fix command queue number on d0i3 flowHaim Dreyfuss1-1/+4
During d0i3 flow we flush all the queue except from the command queue. Currently, in this flow the command queue is hard coded to 9. In DQA the command queue number has changed from 9 to 0. Fix that. This fixes a problem in runtime PM resume flow. Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode") Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: rs: start using LQ command colorGregory Greenman6-36/+47
Up until now, the driver was comparing the rate reported by the FW and the rate of the latest LQ command to avoid processing data belonging to the old LQ command. Recently, FW changed the meaning of the initial rate field in tx response and it holds the actual rate (which is not necessarily the initial rate of LQ's rate table). Use instead LQ cmd color to be able to filter out tx responses/BA notifications which where sent during earlier LQ commands' time frame. This fixes some throughput degradation in noisy environments. Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: add wait for tx queue emptySara Sharon6-34/+107
Now that we have 512 queues, add a wait for single TX queue to gen2. This replaces gen1 wait_tx_queues_empty, which was limited to 32 queues. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: fix many kernel-doc warningsJohannes Berg3-20/+46
Fix many kernel-doc warnings. In one case, this required adding a new enum value to be able to document things properly. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: remove unused REPLY_MAXJohannes Berg1-2/+0
This value is unused, and there's no reason we'd ever use it. Just remove it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: kernel-doc: make proper linksJohannes Berg4-12/+12
Using %enum instead of &enum (and in one case, %struct) results in the wrong parsing. Fix that so that if documentation is generated, the result is clickable links. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: remove unused TX_CMD_NEXT_FRAME_*Johannes Berg1-24/+1
Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: Add fw_name_pre_rf_next_step to support different rf stepsHaim Dreyfuss4-0/+18
Integrated chip may have different HW and RF steps. Currently, the driver supports only different HW steps. Add logic to support different RF steps enables combining different HW and RF steps. Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: pcie: support page dumping in wrt in gen2Liad Kaufman1-0/+29
In gen2, page dumping needs to be done in the trans layer, as it is the one with access to the paging pointers. Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: remove wrt support of page dumps in gen2Liad Kaufman1-2/+4
In gen2, page dumping should be done in transport layer, since the addresses needed for the paging mechanism reside there. Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: document structures used by commandsJohannes Berg2-12/+209
Add documentation to a lot of command IDs that links to the appropriate structure(s) used with those IDs. In one case, actually add and use a new struct for that purpose. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: create/name various enumsJohannes Berg3-19/+77
Some values should be in enums so documentation can refer to them, some values should be named for the same reason. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-02iwlwifi: mvm: disentangle binding command versionsJohannes Berg1-2/+21
The comments/size of the different binding commands get lost in documentation, so introduce two different command structs that can be used there. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.