aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-09iwlwifi: mvm: add support for async rx handler without hold the mutexChaya Rachel Ivgi1-41/+73
When running async rx handler the framework holds the mvm->mutex before starting the async handler, that might cause a deadlock in case the handler calls to ops that lock the mutex as well. Add support for running async rx handler without hold the mutex before activating the handler. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-07iwlwifi: mvm: fix unregistration of thermal in some error flowsChaya Rachel Ivgi1-3/+3
The call to iwl_mvm_thermal_initialize() was too early in the function. Unregister will be performed when goto out_unregister is called, but as the code was - out_free may be called and leave without unregistering from thermal. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-02Merge branch 'fixes' into nextEmmanuel Grumbach1-0/+2
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-02iwlwifi: mvm: support sw queue start/stop from mvmLiad Kaufman1-14/+24
Add a wrapper function to allow stopping SW queues from MVM as well. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-02iwlwifi: mvm: take the transport ref back when leavingLuca Coelho1-0/+7
If d0i3 is supported, we have released the initial transport reference in iwl_op_mode_mvm_start(), so we should take it back in iwl_op_mode_mvm_stop() to keep it balanced. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-02iwlwifi: mvm: only release the trans ref if d0i3 is supported in fwLuca Coelho1-2/+4
If d0i3 is not supported by the firmware (or if it's disabled via module parameters) we shouldn't release the initial transport reference, so that we won't enter runtime suspend. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-03-02iwlwifi: mvm: update ucode status before stopping deviceChaya Rachel Ivgi1-1/+1
Leaving ucode_loaded to true after stop_device() has been called is a recipe for problems. Flows that are not sync'ed with the driver life cycle (like debugfs hooks and thermal hooks) must check that the firmware is loaded before they interact with it. Therefore we need to keep this variable updated with the real status of the firmware. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: support VHT MU-MIMO notificationSara Sharon1-0/+3
When the device is in d0i3/d3 we will not receive the VHT MU-MIMO group id management frame. Instead, firmware will notify us upon exit on the current status and we can in turn update mac80211. Support this notification. While at it, also check as a precaution that the vif is indeed the VHT MU-MIMO owner before updating the firmware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add RSS queues notification infrastructureSara Sharon1-0/+8
In multi rx queue HW, without execessive locking, there is no sync between the ctrl path (default queue) and the rest of the rx queues. This might cause issues on certain situations. For example, in case a delBA was processed on a default queue but out of order packets still wait for processing on the other queue. The solution is to introduce internal messaging between the CTRL path and the other rx queues. The driver will send a message to the firmware, which will echo it to all the requested queues. The message will be in order inside the queue. This way we can avoid CTRL path and RSS queues races. Add support for this messaging mechanism. As the firmware is agnostic to the data sent, add internal representation of the data as well. Although currently only delBA flow will use it, the internal representation will enable generic use of this infrastructure for future uses. Next patch will utilize this messaging mechanism for the reorder buffer delBA flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: support filtered frames notificationSara Sharon1-0/+4
During d0i3 frames might be filtered by the FW and this may cause reordering buffer a delay - as the frames will not be received and reorder will time out. Introduce an API function to receive notification of filtered frames and pass the information to the mac80211. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: support tracing wide commandsSara Sharon1-0/+8
Current iwlwifi_trace_dev_rx prints only the cmd without the group, which might be misleading. Change it to print the wide id. While at it add the DATA_PATH group and sub commands to the trace of the command names, sine it is missing due to patches submitted in parallel. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: fix RSS key sizingSara Sharon1-1/+1
The initialization and copying of the RSS secret key should not use ARRAY_SIZE as we need to initialize a dword array, and not a byte array. Fix also the hook maximum write size to allow writing a longer table - up to full indirection table size. Fixes: 43413a975d06("iwlwifi: mvm: support rss queues configuration command") Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: set the correct descriptor size for tracingSara Sharon1-1/+3
The 9000 series uses a diffrent sized descriptor. Update the relevant tracing field. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add registration to cooling deviceChaya Rachel Ivgi1-0/+1
Register cooling device in order to have the Thermal Manager handle the device's power budget according to the sent notifications. The interface adds a new thermal cooling device to /sys/class/thermal/ folder. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add registration to thermal zoneChaya Rachel Ivgi1-2/+4
Register to thermal_zone interface and implement the thermal ops. The thermal handles the device throttling, and sets the the temperature thresholds the Thermal Manager would be notified of crossing. The thermal interface adds a new thermal zone device sensor under /sys/class/thermal/ folder. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-27iwlwifi: mvm: add CT-KILL notificationChaya Rachel Ivgi1-0/+3
Up to today the driver was notified of the temperature from the FW and decided whether to enter CT-kill or not. From now on, the FW will decide when to enter CT-kill and will notify the driver. Add support for this notification. Signed-off-by: Chaya Rachel Ivgi <chaya.rachel.ivgi@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-23iwlwifi: mvm: Fix paging memory leakMatti Gottlieb1-0/+2
If the opmode is stopped and started again we did not free the paging buffers. Fix that. In addition when freeing the firmware's paging download buffer, set the pointer to NULL. Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: mvm: allow to disable beacon filtering for AP/GO interfaceAndrei Otcheretianski1-0/+1
When in AP mode we need to filter in beacons from other APs to update HT operation mode. As a power optimization the beacons are filtered out when there are no associated stations. As a result, when there are no associated stations, we will not update the HT operation mode until a station connects. Add a debugfs parameter that allows to disable this optimization. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: mvm: support rss queues configuration commandSara Sharon1-0/+4
9000 series supports multi-queue rx. The hardware needs to be configured with the hash functions to perform and indirection table that maps hash results to the relevant CPUs\queues. Support this configuration. Add debugfs hook to configure the indirection table in order to enable performance analysis. The configuration is stateless, receives a partial or full pattern and sends the command to the firmware. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: mvm: support beacon storingSara Sharon1-3/+19
Currently firmware is configured to filter out beacons. In case a beacon was changed - it is waking the host. However, some vendors change their IEs frequently without any significant change, and redundant wakeups are triggered as a result. As a solution disable beacon filtering when entering d0i3. Instead, firmware will store the latest beacon and upon exiting d0i3 it will send it up to the host, so the host can act upon changes (if there were any). This beacon will arrive as a dedicated notification - support it as well. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2016-02-01iwlwifi: various comments and code cleanupsEmmanuel Grumbach1-1/+0
No need to include net/ip6_checksum.h twice. Remove TODOs. Remove trailing space. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: update key params on d0i3 entrance/exitEliad Peller1-25/+39
In order to let the fw do offloading properly, we need to provide various key data (e.g. PN). Configure the params on d0i3 entrance, and update them back on d0i3 exit. Since d3 code is now called in d0i3 which requires runtime pm only, make d3.0 depend on CONFIG_PM (rather than CONFIG_PM_SLEEP), and add required #ifdefs and wrappers where needed, so both CONFIG_PM=n and CONFIG_PM_RUNTIME=n configurations will build correctly. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: infrastructure for frame-release messageSara Sharon1-1/+7
Incoming hardware will send frame release notifications to the reorder buffer in order to update with the BA session status and up to date NSSN. This patch enables the API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: add 9000 series RX processingJohannes Berg1-3/+3
Convert the convert the new infrastructure added by previous patches to actually use the new RX descriptor layout. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: mvm: enable L3 filteringSara Sharon1-1/+2
Firmware will support filtering multicast L3 packets. The L3 filtering is configured by the WOWLAN_CONFIG command. All flags should be enabled by default. Older firmware is not affected as it does not look into this field. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: pcie: allow to pretend to have Tx CSUM for debugEmmanuel Grumbach1-0/+1
Allow to configure the driver to pretend to have TX CSUM offload support. This will be useful to test the TSO flows that will come in further patches. This configuration is disabled by default. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-20iwlwifi: change the Intel Wireless email addressEmmanuel Grumbach1-1/+1
ilw@linux.intel.com is not available anymore. linuxwifi@intel.com should be used instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-16iwlwifi: mvm: change protocol offload flowsSara Sharon1-1/+2
RFC4862 states that "In all cases, a node MUST NOT respond to a Neighbor Solicitation for a tentative address". Currently the driver configures the NS offload and does not wait for address to become permanent, thus violating the RFC. Just removing the address from the address list is not good enough for all cases, since the NS messages are needed for the duplicate address detection and should not be discarded. For d0i3 disable NS offload. Put tentative address in the address list so the NS packet will not be filtered out by ucode. For D3 the platform will not wake from NS packets - so enable NS offload while removing the tentative address from the list. Given that now NS offload might be disabled, and that the ucode uses the IP data for other puroposes (L3 filtering) add two independent flags indicating if IPv4\IPv6 data is valid. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-13iwlwifi: avoid d0i3 commands when no/init ucode is loadedEliad Peller1-0/+8
d0i3 commands are not supported in the init image, so take a reference to ensure we don't enter d0i3 during init image, and additional checks to prevent d0i3 commands when no fw image is loaded. Add a few WARN_ON_ONCE to the d0i3 enter/exit commands to ensure we send d0i3 commands only when the normal ucode is loaded. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-13iwlwifi: update host command messages to new formatSharon Dvir1-98/+124
Host commands now have a group id, express this in printed messages. Signed-off-by: Sharon Dvir <sharon.dvir@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-13iwlwifi: block the queues when we send ADD_STA for uAPSDEmmanuel Grumbach1-0/+13
We send an ADD_STA to instruct the firmware to release frames despite the peer being in PS. Since the ADD_STA command and the Tx frame that comes immediately afterwards can be reordered by the DMA engine, we need to block the Tx queues until the firmware replies with the ADD_STA response. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-07iwlwifi: mvm: don't keep an mvm ref when the interface is downLuca Coelho1-2/+2
There is no reason to keep a reference when the interface is down, since we are not really doing anything. The reference is only needed when the mac80211 start op (or a hw restart) is running, to prevent going into runtime or system supend in the meantime. This will allow us to support runtime PM when the interface is down (in another patch). Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-01iwlwifi: mvm: add 9000-series RX APIJohannes Berg1-0/+1
Define the RX API that's used by the 9000 series hardware. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-01iwlwifi: mvm: Support setting continuous recording debug modeGolan Ben Ami1-0/+1
Add ability to set the continuous recording mode of the FW, while the FW debug data is configured to be stored on the NIC. This could be useful for storing large segments of FW usniffer debug data on the host, while having small store space on the NIC. The host receives the usniffer data through the regular RX path, and the data can get extracted using trace-cmd. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-12-01iwlwifi: mvm: move fw-dbg code to separate fileGolan Ben-Ami1-0/+1
The fw debug functionality is big enough to warrant a separate file. Move existing related functions to the new file. Signed-off-by: Golan Ben-Ami <golan.ben.ami@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-26iwlwifi: mvm: flush all used TX queues before suspendingLuca Coelho1-0/+5
There is a potential race condition when entering suspend with d0i3 in PCIe. If there is a frame queued just before we suspend, it won't complete and we will never clear the queue stuck timer. To solve this, call TX_PATH_FLUSH to flush all queues (except the command queue) as part of the d0i3 entry process. Add a new function that returns all the flushable queues. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-26iwlwifi: mvm: drop low_latency_agg_frame_cnt_limitEyal Shapira1-1/+0
This was an old workaround for solving latency issues with certain Miracast adapters like ActionTec. However this isn't needed anymore and furthermore it hurts throughput in other use cases. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-26iwlwifi: mvm: remove stray nd_config elementLuca Coelho1-6/+0
When the netdetect debugfs entry was removed, the nd_config element was accidentally left in the iwl_mvm structure. Remove it. Fixes: dbb04b0d29f8 ("iwlwifi: mvm: remove netdetect debugfs entry") Reported-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-26iwlwifi: add support for 12K Receive BuffersEmmanuel Grumbach1-1/+15
802.11ac allows A-MSDU that can be up to 12KB long. Since an entire A-MSDU needs to fit into one single Receive Buffer (RB), add support for big RBs. Since this adds lots of pressure to the memory manager and significantly increase the true_size of the RX buffers, don't enable this by default. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-11-18iwlwifi: move under intel vendor directoryKalle Valo1-0/+1434
Part of reorganising wireless drivers directory and Kconfig. Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Powered by cgit, Gruvboxed by Blaster4385.