aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/mvm/ops.c
AgeCommit message (Collapse)AuthorFilesLines
2019-04-03iwlwifi: mvm: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-11/+1
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Johannes Berg <johannes.berg@intel.com> Cc: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Intel Linux Wireless <linuxwifi@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-04-03iwlwifi: dbg_ini: support HW error triggerShahar S Matityahu1-4/+3
Differentiate between SW and HW error interrupts and support ini HW error trigger. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: use dump worker during restart instead of sync dumpShahar S Matityahu1-0/+2
In restart flow, the driver requests HW restart from mac80211 and then mac80211 uses a worker to do the restart flow. In that flow a sync dump is performed. Instead, schedule the dump worker before requesting HW restart from mac80211. This approach simplifies the restart flow. Also, it is neeeded in order to differentiate between the handling of SW and HW errors in a future commit. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-03-22iwlwifi: mvm: report all NO_DATA events to mac80211Johannes Berg1-3/+3
Report all NO_DATA events to mac80211 so they get captured in radiotap for usage in sniffer scenarios; map the info type to a reasonable radiotap type for this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: mvm: remove IWL_MVM_INIT_STATUS_REG_HW_INIT_COMPLETEJohannes Berg1-4/+1
There's no point in this, we already do everything in a nested fashion, and if we didn't we'd already crash in iwl_mvm_leds_exit() etc. Just remove the bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-20iwlwifi: mvm: Don't request HW restart if already requestedIlan Peer1-0/+3
In case mac80211 was requested to perform an HW restart, but the HW restart has not started yet, there is no need to request another one. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: stop static queues correctlyAvraham Stern1-0/+15
AP interfaces still use some static TX queues (for probes, broadcast and multicast frames). These queues were not stopped correctly when the transport layer indicated the queue should be stopped. As a result, when flushing the queues, new frames from the overflow queue were tx'd, so the queues still had frames after flushing. This ended up in an assert since trying to remove a station with non-empty queues. Fix it by stopping the static queues correctly when required. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: add a debug_enable opShahar S Matityahu1-0/+6
D3 debug data is disabled by default. Currently it is done by tampering the dump mask. Add an operation that will allow this to be changed without recompilation. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: add FW recovery flowMordechay Goodstein1-0/+18
Add new API and TLV for the ability to send commands in the beginning and end of reset flow. The full flow of recovery is: 1. While loading FW, get address (from the TLV) of target buffer to read in case of reset 2. If an error/assert happens read the address data from step 1. 3. Reset the HW and load the FW. 4. Send the data read in step 2. 5. Add station keys 6. Send notification to FW that reset flow is done. The main use of the recovery flow is for support in PN/SN recovery when offloaded Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: support FTM initiatorJohannes Berg1-0/+7
Add support for FTM initiator, i.e. peer measurements with FTM if the firmware supports FTM. Additionally, add two defines we depend on in include/linux/ieee80211.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-14iwlwifi: mvm: support FTM responderJohannes Berg1-0/+2
Add support for FTM responder for hardware/firmware combinations that advertise support for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: mvm: add tlc command name to outputLiad Kaufman1-0/+1
Instead of having the command appear as "UNKNOWN" in the dmesg, add the name to it. Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: Fix pre operational dumping flowsShahar S Matityahu1-0/+2
There are several dumping flows in the driver in case of a fail prior to operational. In some cases we get 2 dumps while in others we get none. Fix this by uniting the different flows. Add a different dump type to driver triggered dumps in case we want a dump but did not got assert, and make all dumping go through iwl_fw_dbg_collect_desc to avoid multiple dumps. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: mvm: remove duplicated include from ops.cYueHaibing1-1/+0
Remove duplicated include. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: differentiate between alive timeout and alive flow failureShahar S Matityahu1-2/+0
There are two cases that can cause the alive flow to fail, an assert or a timeout. Currently we mask any incoming asserts when we wait for alive. Solve this by differentiating between the two cases: 1. Let the regular error handling to handle a received assert 2. Do a dump collection in the case of a timeout Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Fixes: f38efdb29389 ("iwlwifi: add dump collection in case alive flow fails") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-02-04iwlwifi: mvm: support CHANNEL_SWITCH_TIME_EVENT_CMD commandSara Sharon1-0/+1
When we do channel switch, we used to schedule time events ourselves. This was offloaded to FW. Support the new command and flow. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: implement CSI reportingJohannes Berg1-0/+1
Implement CSI (channel estimation matrix) reporting in the mvm driver, if the firmware has the capability. Currently only a debugfs API is provided as the API is still under discussion. For now, RX aggregation must be disabled to use this feature on data frames as we haven't found a good way to attach the data to A-MPDUs, given complexities with multi-queue. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: add location APIsJohannes Berg1-0/+17
Add the location/time-of-flight/FTM APIs that we'll use in follow-up patches to implement FTM responder and initiator. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: remove TOF implementationJohannes Berg1-8/+0
This is an ancient (~2015) implementation that no longer matches the firmware in any way, and most likely never worked. Remove all of it so it can be reintroduced properly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-29iwlwifi: mvm: clean up LDBG config command usageJohannes Berg1-0/+3
Clean up the LDBG config command to not be called "continuous recording", and while at it actually remove the continuous recording implementation completely since it was only used for store & forward architectures. This also fixes a bug at least in iwl_fw_dbg_buffer_allocation() because what's now "__le32 type" (matching the firmware) used to be "__le16 enable_recording", so the buffer allocation config sub-struct would erroneously have started at the wrong offset. In the other cases this didn't actually lead to a bug as other bytes in pad[] were all zeroes, so accessing the 16-bit value as a 32-bit value wouldn't make a difference (in little endian.) Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2019-01-25iwlwifi: mvm: support mac80211 TXQs modelSara Sharon1-38/+49
Move to use the new mac80211 TXQs implementation. This has quite a few benefits for us. We can get rid of the awkward mapping of DQA to mac80211 queues. We can stop buffering traffic while waiting for the queue to be allocated. We can also use mac80211 AMSDUs instead of building it ourselves. The usage is pretty simple: Each ieee80211_txq contains iwl_mvm_txq. There is such a queue for each TID, and one for management frames. We keep having static AP queues for probes and non-bufferable MMPDUs, along with broadcast and multicast queues. Those are being used from the "old" TX invocation path - iwl_mvm_mac_tx. When there is a new frame in a TXQ, iwl_mvm_mac_wake_tx is being called, and either invokes the TX path, or allocates the queue if it does not exist. Most of the TX path is left untouched, although we can consider cleaning it up some more, for example get rid of the duplication of txq_id in both iwl_mvm_txq and iwl_mvm_dqa_txq_info. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-12-20iwlwifi: mvm: handle RX no data notificationShaul Triebitz1-0/+2
Handle RX no data notification, which is used for advertising NDP to radiotap. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-12-03Merge tag 'wireless-drivers-next-for-davem-2018-11-30' of ↵David S. Miller1-13/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.21 First set of patches for 4.21. Most notable here is support for Quantenna's QSR1000/QSR2000 chipsets and more flexible ways to provide nvram files for brcmfmac. Major changes: brcmfmac * add support for first trying to get a board specific nvram file * add support for getting nvram contents from EFI variables qtnfmac * use single PCIe driver for all platforms and rename Kconfig option CONFIG_QTNFMAC_PEARL_PCIE to CONFIG_QTNFMAC_PCIE * add support for QSR1000/QSR2000 (Topaz) family of chipsets ath10k * add support for WCN3990 firmware crash recovery * add firmware memory dump support for QCA4019 wil6210 * add firmware error recovery while in AP mode ath9k * remove experimental notice from dynack feature iwlwifi * PCI IDs for some new 9000-series cards * improve antenna usage on connection problems * new firmware debugging infrastructure * some more work on 802.11ax * improve support for multiple RF modules with 22000 devices cordic * move cordic macros and defines to a public header file * convert brcmsmac and b43 to fully use cordic library ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23iwlwifi: dbg: don't limit dump decisions to all or monitorSara Sharon1-1/+0
Currently opmode is limited to asking transport to either dump all the dumps configured at startup, or monitor only. Instead, pass to transport a bitmask, to allow flexibility. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-15iwlwifi: fix D3 debug data buffer memory leakShahar S Matityahu1-0/+2
If the driver is unloaded when D3 debug data pulling is enabled but not triggered, it doesn't release the data buffer. Fix this by adding iwl_fw_runtime_free and calling it from the relevant places. Fixes: 2d8c261511ab ("iwlwifi: add d3 debug data support") Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11iwlwifi: dbg: avoid passing trigger aroundSara Sharon1-1/+1
The trigger structure is being passed around, when all we care about is whether to dump only monitor or not. Pass a bool instead. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11iwlwifi: mvm: switch management tx antenna only on tx failureAvraham Stern1-0/+2
Switch the antenna used for management tx only if previous tx failed. If previous tx succeeded, there is no reason to switch antennas. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-11-11iwlwifi: mvm: remove queue_info_lockJohannes Berg1-11/+2
All the queue management code runs under mvm->mutex, so there are only very few cases of accessing the data structures without it: * TX path, which doesn't take any locks anyway * iwl_mvm_wake_sw_queue() and iwl_mvm_stop_sw_queue() where we just (atomically) read a bitmap, so the lock isn't needed. Therefore, we can remove the spinlock. This enables some cleanup in the ugly locking in iwl_mvm_inactivity_check(). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: dbg: make trigger functions type agnosticSara Sharon1-1/+1
As preparation for new trigger type, make iwl_fw_dbg_collect_desc agnostic to the trigger structure. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: runtime: add send host command op to firmware runtime op structShahar S Matityahu1-0/+13
Add send host command op to firmware runtime op struct to allow sending host commands to the op mode from the fw runtime context. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: add dump collection in case alive flow failsShahar S Matityahu1-0/+2
Trigger dump collection if the alive flow fails, regardless of the reason. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: mvm: set max TX/RX A-MPDU subframes to HE limitJohannes Berg1-0/+4
In mac80211, the default remains for HT, so set the limit to HE for our driver. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: dbg: group trigger condition to helper functionSara Sharon1-5/+3
The triplet of get trigger, is trigger enabled and is trigger stopped repeats itself. Group them in a function to avoid code duplication. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-10-06iwlwifi: dbg: move debug data to a structSara Sharon1-5/+5
The debug variables are bloating the iwl_fw struct. And the fields are out of order, missing docs and some are redundant. Clean this up. This serves as preparation for unionizing it for the new ini infra. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: configure power scheme to balanced for 22560 devicesGolan Ben Ami1-4/+0
As a temporary stage in the 22560 devices bring up, we disabled power save, to avoid bugs related to that domain. Now we would like to use power save so enable the balanced mode, and allow configuring the mode via module parameter. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-09-28iwlwifi: mvm: do not override amsdu size user settingsShaul Triebitz1-8/+12
Since AMSDUs are not de-aggregated by HW in monitor mode, we still need the option for setting large RBs (up to 12K). Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho1-5/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: improve the flow when a NIC is disconnectedEmmanuel Grumbach1-2/+4
When the NIC is disconnected, we just can't do anything besides seeking for help from the bus driver. Dumping the device's memory is not necessary and just bloats the logs with unusable data. Moreover, asking mac80211 to restart the hardware is also useless. Bypass all this. Also, use the STATUS_TRANS_DEAD status bit instead of a bool inside the transport layer. The advantage of this is that now, the transport and the op_mode can know what is the situation and bypass the useless recovery steps mentioned above. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: support new WoWLAN status FW APILuca Coelho1-10/+7
A new FW API has been added for WOWLAN_GET_STATUSES to support multiple GTK keys and IGTK keys. Check the respective TLV and use the new API when it is set. Let most of the code use the new version (v7) and convert the old version (v6) to the new one when needed. Also refactor some functions a bit so that they can be reused more easily. Particularly the part that calls WOWLAN_GET_STATUSES which is reused in D3 and D0i3. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: mvm: protect D0i3 code behind CONFIG_PMLuca Coelho1-2/+13
Runtime PM can only be used if CONFIG_PM is set. Move all the d0i3 code (which is essentially runtime PM) behind the CONFIG_PM flag. This prevents undefined usage of some functions when CONFIG_PM is not defined. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-31iwlwifi: add d3 debug data supportShahar S Matityahu1-1/+5
During d3, the firmware records debug data into internal buffer if debug data collection occurs, collect the data that was written to the buffer Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: hard code power save mode to CAM for 22560 devicesGolan Ben Ami1-2/+5
Balanced power save mode isn't supported in the fw for 22560 devices yet. Configure the power save mode to CAM until it gets implemented. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02Revert "iwlwifi: implement fseq version mismatch warning"Sara Sharon1-3/+1
This reverts commit f2e66c8df0d0f10c70ed7f5e14a939714e9ee6a9. The firmware never implemented this, and they do not plan to. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: mvm: configure multi RX queueSara Sharon1-0/+1
Currently multi-queue is disabled for 22000 devices. This was since driver isn't supposed to write to prph registers anymore, and FW needs to configure the RFH. Now that FW added support for the API - use it and remove the 22000 multi RX queue disablement. Bump min API version to avoid compatibility issues. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: allow masking out memory areas from the fw dumpShahar S Matityahu1-0/+1
Reading and dumping memory areas takes time, and sometimes dumping all of the areas isn't necessary. Allow choosing the memory areas which should be dumped. Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-08-02iwlwifi: support new rx_mpdu_desc apiGolan Ben Ami1-3/+6
22560 devices use a new rx_mpdu_desc api. Update the code to use the new api. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: pcie: support 2k rx buffersGolan Ben Ami1-1/+4
The smallest rb size supported today is 4k rx buffers. 22560 devices use 2k rxb's, so allow using 2k buffers. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: pcie: update bytes in the byte count tableGolan Ben Ami1-1/+2
For devices which use the image loader image, the length of the frame must be updated in the byte count in bytes, and not dwords as today. Avoid dividing the input length by 4. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-07-26iwlwifi: add support for IEEE802.11axLuca Coelho1-0/+1
Add support for the HE in the iwlwifi driver conforming with P802.11ax_D2.0. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2018-04-26iwlwifi: introduce Image Loader (IML) - new firmware imageGolan Ben-Ami1-0/+3
In future devices a new image will be introduced - IML. The IML, image loader, is loaded by the ROM, and as part of the new self-init flow, loads the rest of the firmware images to the device. Store the image, so the ROM can load it to the device. Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.