Age | Commit message (Collapse) | Author | Files | Lines |
|
Revert commit dfdfe4be183b ("wifi: iwlwifi: remove retry loops in
start"), it turns out that there's an issue with the PNVM load
notification from firmware not getting processed, that this patch
has been somewhat successfully papering over. Since this is being
reported, revert the loop removal for now.
We will later at least clean this up to only attempt to retry if
there was a timeout, but currently we don't even bubble up the
failure reason to the correct layer, only returning NULL.
Fixes: dfdfe4be183b ("wifi: iwlwifi: remove retry loops in start")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241022092212.4aa82a558a00.Ibdeff9c8f0d608bc97fc42024392ae763b6937b7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This isn't mvm specific.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.5d71a0a2b56c.I7e0fe636d914852963e7a2f5e6037d0c3e367145@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver should call iwl_dbg_tlv_free even if debugfs is not defined
since ini mode does not depend on debugfs ifdef.
Fixes: 68f6f492c4fa ("iwlwifi: trans: support loading ini TLVs from external file")
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Reviewed-by: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240510170500.c8e3723f55b0.I5e805732b0be31ee6b83c642ec652a34e974ff10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
All our firmware versions should now be printed in hex.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240512072733.cae4c562b2c3.I5043383bd0e81f872c55046afd2c6560f482c8e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Given how late we are in the cycle, merge the two fixes from
wireless into wireless-next as they don't see that urgent.
This way, the wireless tree won't need rebasing later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This appears to work around a deadlock regression that came in
with the LED merge in 6.9.
The deadlock happens on my system with 24 iwlwifi radios, so maybe
it something like all worker threads are busy and some work that needs
to complete cannot complete.
Link: https://lore.kernel.org/linux-kernel/20240411070718.GD6194@google.com/
Fixes: f5c31bcf604d ("Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds")
Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://msgid.link/20240430234212.2132958-1-greearb@candelatech.com
[also remove unnecessary "load_module" var and now-wrong comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240320232419.b3715c0d4bdd.I1337ed9c3edbec4ea9ff7e8a8b02410d5e69bf74@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
load b0 version of ucode for both a0 and b0 step of HR RF.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.0166f5d2d5d2.I34c1d46aefd70b34c1c75cea67792bc5ec8bc285@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are some changes coming to wireless-next that will
otherwise cause conflicts, pull wireless in first to be
able to resolve that when applying the individual changes
rather than having to do merge resolution later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The storage for the TLV PC register data wasn't done like all
the other storage in the drv->fw area, which is cleared at the
end of deallocation. Therefore, the freeing must also be done
differently, explicitly NULL'ing it out after the free, since
otherwise there's a nasty double-free bug here if a file fails
to load after this has been parsed, and we get another free
later (e.g. because no other file exists.) Fix that by adding
the missing NULL assignment.
Cc: stable@vger.kernel.org
Fixes: 5e31b3df86ec ("wifi: iwlwifi: dbg: print pc register data once fw dump occurred")
Reported-by: Guy Kaplan <guy.kaplan@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.675f3c24ec0d.I6ab4015cd78d82dd95471f840629972ef0331de3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's either the pldr_sync case, in which case we didn't want
or do the retry loops anyway, or things will just continue to
fail. Remove the retry loop that was added in a previous attempt
to address the issue that was later (though still a bit broken)
addressed by the pldr_sync case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240123200528.f80a88a18799.I48f21eda090f4cc675f40e99eef69a986d21b500@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add the support for new RF based on step-id.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231011130030.d902aa8cfd1b.I7c7b357ba41c00015d6c6255b45b3d17549948f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In 'iwl_parse_tlv_firmware()', check for 'kmemdup()' return value
when handling IWL_UCODE_TLV_CURRENT_PC and set the number of parsed
entries only if an allocation was successful (just like it does with
handling IWL_UCODE_TLV_CMD_VERSIONS above). Compile tested only.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20231009170453.149905-1-dmantipov@yandex.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There's a race when the device is unbound (maybe because the
module is unloaded) while the opmode start hasn't finished yet.
The complete(request_firmware_complete) after the opmode start
was meant (and commented accordingly) to prevent this problem,
but it's not sufficient when the opmode module is loaded after
the firmware load already completed, which happens regularly
now because firmware load doesn't require userspace, unlike
module load.
Fix this by using the existing opmode registration mutex to
protected the start/stop flows against each other properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.85951554fed8.I62f20f40d79d0f136fa05e46d7fc16dc437fa3db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
These retries aren't going to succeed if the device was
deemed dead and needs to be unbound/rebound/... to be
recovered; skip the retries in that case.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230926110319.9f472069d75d.Ib6684c5b2ea8ed98f082c9b0e9bb2b03c3ea4fe3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In case the user sets the enable_ini to some preset, we want to honor
the value.
Remove the ops to set the value of the module parameter is runtime, we
don't want to allow to modify the value in runtime since we configure
the firmware once at the beginning on its life.
Fixes: b49c2b252b58 ("iwlwifi: Configure FW debug preset via module param.")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230830112059.5734e0f374bb.I6698eda8ed2112378dd47ac5d62866ebe7a94f77@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We have the trailing dash here, but that complicates all
the code. Simplify this by removing the dashes, adding
them to the *_MODULE_FIRMWARE macros, and adjusting the
code using this accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.72240ca13b83.I1f4ed547f0964719ed98a3ef928080462d594491@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
All the configurations for the various Bz/Gl devices
are basically identical, except for Gl A-step and the
firmware filename prefixes.
Add some infrastructure to auto-generate the firmware
filename prefix based on the detected MAC step and
RF name/step, and remove all the unneeded configs.
This reduces the size of the iwlwifi module by ~9k:
517582 27111 560 545253 851e5 drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
526885 27083 560 554528 87620 drivers/net/wireless/intel/iwlwifi/iwlwifi.ko
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230621130443.1dc121ba338f.I07d651516eb82cbaded4724ef30558a50f2fa866@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Newer firmware images have a TLV advertising how many
beacons they support, use that to permit adding more
links in AP mode (FW needs to support at least as many
links as beacons).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230416154301.0d7522533557.Ic6b5992e94446c35cb0f3add019defa6e7aded2a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There is a spelling mistake in a IWL_ERR error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230414130637.a00965734d02.I760cb43829b3d7a0f567f0958059f2fae0aa8a93@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add debug print for different FW program counter details of
different CPU. Program counter pc details will be read from
TLV during init.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230413213309.862790d336a9.I34e2ea05a79e8b2552f7f221bacf3af0166cb9c0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We can remove the intermediary string conversion and use drv->fw_index
in the final snprintf directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230127002430.175bfffdf2f5.I7ec7a29b2d93a977cb0a39dbcc7c875032eb14b7@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
Add support for advertising EHT capabilities if supported by
device SKU and not disabled by module parameters.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://lore.kernel.org/r/20221122220713.6bc00d851794.I214005645f3da21d8f2458a70355deeca04a19e8@changeid
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
brcmfmac
* add BCM43454/6 support
rtw89
* add support for 160 MHz channels and 6 GHz band
* hardware scan support
iwlwifi
* support UHB TAS enablement via BIOS
* remove a bunch of W=1 warnings
* add support for channel switch offload
* support 32 Rx AMPDU sessions in newer devices
* add support for a couple of new devices
* add support for band disablement via BIOS
mt76
* mt7915 thermal management improvements
* SAR support for more mt76 drivers
* mt7986 wmac support on mt7915
ath11k
* debugfs interface to configure firmware debug log level
* debugfs interface to test Target Wake Time (TWT)
* provide 802.11ax High Efficiency (HE) data via radiotap
ath9k
* use hw_random API instead of directly dumping into random.c
wcn36xx
* fix wcn3660 to work on 5 GHz band
ath6kl
* add device ID for WLU5150-D81
cfg80211/mac80211
* initial EHT (from 802.11be) support
(EHT rates, 320 MHz, larger block-ack)
* support disconnect on HW restart
* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
mac80211: Add support to trigger sta disconnect on hardware restart
mac80211: fix potential double free on mesh join
mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
rtw89: 8852c: process logic efuse map
rtw89: 8852c: process efuse of phycap
rtw89: support DAV efuse reading operation
rtw89: 8852c: add chip::dle_mem
rtw89: add page_regs to handle v1 chips
rtw89: add chip_info::{h2c,c2h}_reg to support more chips
rtw89: add hci_func_en_addr to support variant generation
rtw89: add power_{on/off}_func
rtw89: read chip version depends on chip ID
rtw89: pci: use a struct to describe all registers address related to DMA channel
rtw89: pci: add V1 of PCI channel address
rtw89: pci: add struct rtw89_pci_info
rtw89: 8852c: add 8852c empty files
MAINTAINERS: add devicetree bindings entry for mt76
...
====================
Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are no shipping firmware versions with this, and there
will also not be in the future, so remove the support.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8b3c8b4adf41.Ib3ddb6b250ea2dd72b4ecc88bdd5cffb86af1dcc@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The module param "enable_ini" is currently used to be enable/disable ini.
Add the option to configure the FW debug preset via this module param,
by change it type from boolean to an integer.
Signed-off-by: Ayala Barazani <ayala.barazani@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220304131517.4929e4b14956.I1bdffa4c37d4ee349aa0001978b716b96e38b090@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There's no good reason to pick the opmode first and load this
under the mutex, so just load it before continuing. This will
let us load it asynchronously more easily later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220204122220.a28df852f70d.Icaf6556d81bc137a459aabf0511d46c3861b0413@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
When enabling W=3 that gets us -Wcast-qual, fix those warnings
in the code and propagate constness properly, or cast it away
via (uintptr_t) where really needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.4ac2f19c121e.Ied9469d93f8199206242bfba96e4e8d1949e3a08@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Most of this change is a continuation of commit 403ea939ea6a
("iwlwifi: dbg: Mark ucode tlv data as const") propagating the
(const) type qualifier for ucode based tlv data to avoid having
the impression that it is writeable.
The other part of the change preserves the (const) type qualifier
over casts and function calls where it was previously lost.
Both changes are needed to avoid compile time errors on system with
more strict error settings, in this case found with clang on FreeBSD.
Sponsored by: The FreeBSD Foundation
Signed-off-by: Bjoern A. Zeeb <bz@FreeBSD.ORG>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
[fix double word in commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20220128153014.3230c41312fc.I0032c597984834258d5a79b97052ed83dbe53b80@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If no firmware was present at all (or, presumably, all of the
firmware files failed to parse), we end up unbinding by calling
device_release_driver(), which calls remove(), which then in
iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However
the new code I added will still erroneously access it after it
was freed.
Set 'failure=false' in this case to avoid the access, all data
was already freed anyway.
Cc: stable@vger.kernel.org
Reported-by: Stefan Agner <stefan@agner.ch>
Reported-by: Wolfgang Walter <linux@stwm.de>
Reported-by: Jason Self <jason@bluehome.net>
Reported-by: Dominik Behr <dominik@dominikbehr.com>
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: ab07506b0454 ("iwlwifi: fix leaks/bad data after failed firmware load")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid
|
|
When CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, iwlwifi crashes
when the opmode module cannot be loaded, due to completing
the completion before using drv->dev, which can then already
be freed.
Fix this by removing the (fairly useless) message. Moving the
completion later causes a deadlock instead, so that's not an
option.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20211210091245.289008-2-luca@coelho.fi
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If firmware load fails after having loaded some parts of the
firmware, e.g. the IML image, then this would leak. For the
host command list we'd end up running into a WARN on the next
attempt to load another firmware image.
Fix this by calling iwl_dealloc_ucode() on failures, and make
that also clear the data so we start fresh on the next round.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.1f742f0eb58a.I1315f22f6aa632d94ae2069f85e1bca5e734dce0@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There's another set of error tables on newer (Bz) hardware,
support finding and dumping those error tables if present.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.c727a975b434.Ie5ad3fd974b700f1b90867b2b52ef7607799e8fe@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
There can be two TCMs in a given device, dump both of the
error tables if present.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.887cba319301.Ifdc3f617f7e0e3e39c90e8c208e60f11b3bb9404@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
With more things being added, we're no longer going to duplicate
the error tables from the debug TLVs nor send them at runtime.
Use the debug TLVs to find the locations of the error tables. As
we've never released firmware using IWL_UCODE_TLV_TCM_DEBUG_ADDRS
just remove that entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211210110539.779d68490f68.I472c7d9cbaca46000a10ec18808ef54836b33a8a@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
first set of iwlwifi patches for v5.17
* A few mei fixes;
* Some improvements in D3;
* Support for new FW API commands;
* Fixes and cleanups in device configurations;
* Support some new FW API command versions;
* Fix WGDS revision 3 reading bug;
* Some firmware debugging improvements;
* Fixes for in device configuration structures;
* Improvements in the session protection code;
* Support SAR GEO Offset Mapping (SGOM) via BIOS;
* Continued work on the new Bz device family;
* Some more firmware debugging improvements;
* Support new FW API version 68;
* Add some new device IDs;
* Some other small fixes, clean-ups and improvements.
|
|
We have a MAC component (which is inside the SoC) and it has several
different HW steps. 3 bits used to be enough but now we need 4-bits
to represent all the different steps.
Properly support 4-bits in the MAC step value by refactoring all the
current handling of the MAC step/dash.
Already from family 8000 and up the dash (bits 0-1) no longer exists
and the step (until 8000 bits 2-3) consists of the dash bits as well.
To do this remove the CSR_HW_REV_STEP and the CSR_HW_REV_DASH
macros, replace them with CSR_HW_REV_STEP_DASH and add hw_rev_step
into the trans struct.
In addition remove the CSR_HW_IF_CONFIG_REG_MSK_MAC_STEP and
CSR_HW_IF_CONFIG_REG_MSK_MAC_DASH macros and create a new macro
combining the 2 (this way we don't need shifting or anything else.)
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Mike Golant <michael.golant@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211207160459.2e81a14d1f80.Ia5287e37fb3439d805336837361f6491f958e465@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In some very rare cases the init flow may fail. In many cases, this is
recoverable, so we can retry. Implement a loop to retry two more times
after the first attempt failed.
This can happen in two different situations, namely during probe and
during mac80211 start. For the first case, a simple loop is enough.
For the second case, we need to add a flag to prevent mac80211 from
trying to restart it as well, leaving full control with the driver.
Cc: <stable@vger.kernel.org>
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/iwlwifi.20211110150132.57514296ecab.I52a0411774b700bdc7dedb124d8b59bf99456eb2@changeid
|
|
Add new TLV for debug config set to read preset
based on TLV is set in context info.
This is needed to set the preset based on ucode in early
trigger point.
Add DRAM frag allocation info in first fragment of
DBGC1 with all details.
New capability from FW for DBGC frag debug support is
added and BUFFER_ALLOCATION_CMD is disabled in capability
is supported.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.cacf0babc521.If3704b5fda09b344e3e438252360898a3f2e90fa@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Parse the memory dump exclusion TLVs from the firmware file
and save the data to be able to apply them later upon dump.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017123741.ec280bcb32cb.Iac0da0e22d7c3c0e237867c9113a06ddd95c7a51@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Consensus seems to be emerging that corporations or groups
shouldn't be listed as module authors, and we will not
maintain this email address any longer. Just remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211017113927.32109514aad0.I91a7d745f4ab50ee8ef918ece00dda8251541595@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210802172232.2a583d006739.Ia782c08525397b6430b1c877a870d688a7f3f494@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
If the TCM is present in the hardware (as advertised in the firmware
file TLV data), dump its error log table during firmware error dumps.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.2d2149f6654f.Id831f8fbca59900ba7efc623ffca0ca938b664d3@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
umac_error_table In TLV address was read using mask on MSB
but on the same table in alive message it was without which
caused mismatch in devices with different memory region MSB
Signed-off-by: Roee Goldfiner <roee.h.goldfiner@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.179fee442115.Ib6eabe86cfda0b6044f07c07448c366b6e07e53d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
The ucode TLV data may be read-only and should be treated as const
pointers, but currently a few code forcibly cast to the writable
pointer unnecessarily. This gave developers a wrong impression as if
it can be modified, resulting in crashing regressions already a couple
of times.
This patch adds the const prefix to those cast pointers, so that such
attempt can be caught more easily in future.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20210112132449.22243-3-tiwai@suse.de
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
Parse phy integration string from FW TLV.
Signed-off-by: Dror Moshe <drorx.moshe@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210117164916.0c790e930484.I23ef2cb9c871e6adc4aab6be378f3811cb531155@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
warning by replacing a /* fall through */ comment with the new
pseudo-keyword macro fallthrough; instead of letting the code fall
through to the next case.
Notice that Clang doesn't recognize /* fall through */ comments as
implicit fall-through markings.
Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/edd98d194bfc98b4be93a9bdc303630b719c0e66.1605896060.git.gustavoars@kernel.org
|
|
Use SPDX tags instead of the long copyright notices. Also cleanup
some duplicate copyright notices and combine the years where possible.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201210000603.481bcb512a6f.I8146abe5a637079e7336209f23cb26af98b12b31@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
|