aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/iwl-config.h
AgeCommit message (Collapse)AuthorFilesLines
2019-04-19iwlwifi: remove unused 0x40C0 PCI device IDsLuca Coelho1-1/+0
This device ID and device type was never released, so we can remove it from the PCI IDs list. Signed-off-by: Luca Coelho <[email protected]>
2019-04-18Merge tag 'wireless-drivers-next-for-davem-2019-04-18' of ↵David S. Miller1-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Nothing really special standing out this time, iwlwifi being the most active driver. Major changes: iwlwifi * send NO_DATA events so they can be captured in radiotap * support for multiple BSSID * support for some new FW API versions * support new hardware * debugfs cleanups by Greg-KH qtnfmac * allow each MAC to specify its own regulatory rules ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-03iwlwifi: set 512 TX queue slots for AX210 devicesShaul Triebitz1-0/+3
AX210 devices support 256 BA (256 MPDUs in an AMPDU). The firmware requires that the number of TFDs will be minimum twice as big as the BA size (2 * 256 = 512). Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-03iwlwifi: mvm: use correct GP2 register address for 22000 familyAvraham Stern1-0/+1
The device time register address has changed for 22000 devices. Add a util function for getting the GP2 time and use the correct register address depending on the device family. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-03iwlwifi: dbg_ini: add monitor header to smem monitorShahar S Matityahu1-0/+4
Add write pointer and cycle count registers to smem monitor header. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-03iwlwifi: add support for quz firmwaresLuca Coelho1-0/+1
Add a new configuration with a new firmware name for quz devices. And, since these devices have the same PCI device and subsystem IDs, we need to add some code to switch from a normal qu firmware to the quz firmware. Signed-off-by: Luca Coelho <[email protected]>
2019-03-22iwlwifi: for AX210 device support radio GF4Shaul Triebitz1-0/+1
Add support for radio gf4 (CDB radio). Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-03-22iwlwifi: add support for 6-7 GHz channelsShaul Triebitz1-1/+3
Add UHB (ultra high band) channels and use 16 bit variables to fit the new channels. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-03-22iwlwifi: rename structs to fit the new namesIhab Zhaika1-1/+1
rename few structs to fit the new marketing names Signed-off-by: Ihab Zhaika <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-20iwlwifi: add new cards for 22000 and killer series and change the market nameIhab Zhaika1-1/+1
Add a few PCI ID'S for 22000 and killer series in addition to chainging the marketing name. Signed-off-by: Ihab Zhaika <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: start using B-step for some 9000 devicesLuca Coelho1-1/+1
We don't support A-step for some device combinations anymore. So change them to use B-step, renaming and reorganizing the config structures. Additionally, fix one device that was using the wrong configuration. Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: align to new periphery address space for AX210 familyShaul Triebitz1-2/+4
In AX210 family, UMAC periphery address space moved from 0xA00000 to 0xD00000. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: introduce device family AX210Shaul Triebitz1-0/+7
Add new device family AX210. Make the needed changes for this family. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-04iwlwifi: implement BISR HW workaround for 22260 devicesJohannes Berg1-1/+3
There's a small hardware bug in 22260 devices which thus require a few more delays during initialization. Implement this workaround. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-04iwlwifi: move config structs to C fileJohannes Berg1-29/+2
Even if they're static const, there's no need to duplicate the structs every time they're included and used. Move them to an appropriate C file instead. Also remove useless parentheses along the way. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-01-29iwlwifi: update product name for 9260 and 9560Ihab Zhaika1-0/+5
update the product name for the some of the cards from the series of 9260 and 9560 Signed-off-by: Ihab Zhaika <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-01-25iwlwifi: remove support for 9000 A-step devicesLuca Coelho1-6/+0
We don't support 9000 A-step devices anymore, so we can remove support for loading both the a0/a0 and a0/b0 FWs. Signed-off-by: Luca Coelho <[email protected]>
2019-01-25iwlwifi: add new cards for 22560, 9260 and killer seriesIhab Zhaika1-0/+2
add few PCI ID'S for 22560, 9260 and killer series. Signed-off-by: Ihab Zhaika <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-01-25iwlwifi: correct one of the PCI struct namesIhab Zhaika1-0/+1
One of the cfg struct names is mistakenly "iwl22000", when it should be "iwl22560". Chage-Id: If9fbfa4bceef81d028c90c98d47115fbe39da547 Signed-off-by: Ihab Zhaika <[email protected]> Fixes: 2f7a3863191a ("iwlwifi: rename the temporary name of A000 to the official 22000") Signed-off-by: Luca Coelho <[email protected]>
2019-01-25iwlwifi: add PCI IDs for the 22260 device seriesLuca Coelho1-0/+3
Add new structs and PCI IDs for 22260 devices. Signed-off-by: Luca Coelho <[email protected]>
2018-12-14iwlwifi: don't define OTP_LOW_IMAGE_SIZE per family, but per sizeLuca Coelho1-5/+3
Using OTP_LOW_IMAGE_SIZE_FAMILY_8000/9000/22000 only obfuscates the actual values, since these 3 are the same. Redefine the values per size so it's easier to understand and compare the different configurations. Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: fix devices with PCI Device ID 0x34F0 and 11ac RF modulesLuca Coelho1-1/+8
The devices with PCI device ID 0x34F0 are part of the SoC and can be combined with some different external RF modules. The configuration for these devices should reflect that, but are currently mixed up. To avoid confusion with discrete devices, add part of the firmware to be used and the official name of the device to the cfg structs. This is least reorganization possible (without messing things even more) that could be done as a bugfix for this SoC. Further reorganization of this code will be done separately. Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho1-5/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: add d3 debug data supportShahar S Matityahu1-0/+4
During d3, the firmware records debug data into internal buffer if debug data collection occurs, collect the data that was written to the buffer Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-08-05Merge tag 'wireless-drivers-next-for-davem-2018-08-05' of ↵David S. Miller1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 This time a bigger pull request as we have two new Mediatek drivers MT76x2u (CONFIG_MT76x2U) and MT76x0U (CONFIG_MT76x0U). Also iwlwifi got support for the new IEEE 802.11ax standard, the successor for 802.11ac. And naturally smaller new features and bugfixes all over. Major changes: wcn36xx * fix WEP in client mode wil6210 * add support for Talyn-MB (Talyn ver 2.0) device * add support for enhanced DMA firmware feature iwlwifi * implement 802.11ax D2.0 * support for the new 22560 device family * new PCI IDs for 22000 and 22560 qtnfmac * implement cfg80211 power management callback * enable multiple SSIDs scan support * qtnfmac: implement basic WoWLAN support mt7601u * fall back to software encryption for hw unsupported ciphers * enable 802.11 Management Frame Protection (MFP) mt76 * support setting RTS threshold * add USB support * add support for MT76x2u devices * add support for MT76x0U devices mwifiex * allow user space to set all other IEs except WMM IE rsi * add firmware support for AP+BT dual mode ==================== Signed-off-by: David S. Miller <[email protected]>
2018-07-26iwlwifi: support multiple tfd queue max sizes for different devicesGolan Ben Ami1-0/+2
22560 devices tfd queue max size is 2^16. Allow a configurable max size in the driver for supporting different devices. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-07-26iwlwifi: introduce device family 22560Golan Ben Ami1-0/+1
Device 22560 have many different hw and sw features than 22000 family, so introduce a new family of devices - 22560. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-07-26iwlwifi: allow different csr flags for different device familiesGolan Ben Ami1-1/+1
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Additionally, support 22560 device csr flags and addresses. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-07-26iwlwifi: add support for 22560 devicesLuca Coelho1-1/+3
Add support for the new 22560 family of devices and, while at it, reorganize the 22000 family so it fits better with the new one. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-07-25iwlwifi: add more card IDs for 9000 seriesEmmanuel Grumbach1-0/+5
Add new device IDs for the 9000 series. Cc: [email protected] # 4.14 Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2018-04-26iwlwifi: make bitfield a u32 instead of u16Luca Coelho1-1/+1
The bitfield we use in struct iwl_cfg contains 17 bits, but we declare it as u16. The compiler doesn't seem to have any problems with that (it probably automatically makes it u32), but it's cleaner to use a type that is long enough for all the flags. Signed-off-by: Luca Coelho <[email protected]>
2018-04-26iwlwifi: support new csr addresses for hw addressGolan Ben Ami1-2/+18
In future devices we use different csr addresses for hw addresses. Update csr addresses to support new and legacy devices. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-04-26iwlwifi: cfg: remove unnecessary cfg data in non-dvm devicesLuca Coelho1-2/+2
The max_data_size and max_inst_size values are only needed for DVM devices. Remove the assignment to those fields in 7000 and newer families so we can also remove the otherwise unnecessary inclusion of iwl-agn.h headers. Signed-off-by: Luca Coelho <[email protected]>
2018-04-26iwlwifi: allow different csr flags for different device familiesGolan Ben Ami1-0/+65
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-04-20iwlwifi: mvm: update rs-fw APINaftali Goldstein1-0/+2
Update rs-fw API to match changes in FW. Specifically, the TLC_MNG_NOTIF_REQ_CMD command and TLC_MNG_AMSDU_ENABLE_NOTIF notification are removed, the A-MSDU related info is received from FW via the TLC_MNG_UPDATE_NOTIF, and the TLC_MNG_CONFIG_CMD uses version 2 of its data structure. Additionally, constify some arguments in a couple of functions. Signed-off-by: Naftali Goldstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-04-20iwlwifi: Revert "iwlwifi: pcie: dynamic Tx command queue size"Sara Sharon1-3/+0
This reverts commit dd05f9aab4426ff178b12d601e50d19d336eba30. Shorter TX queues support was added eventually without the need for the parameters this patch added. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-03-16iwlwifi: add shared clock PHY config flag for some devicesLuca Coelho1-0/+5
Some devices use a shared clock which is very sensitive to variations and cause trouble in some situations. We need to set a bit in the phy configuration to indicate that to the FW. To make this generic, add a extra_phy_config_flags element to the device configuration and OR it into the phy_cfg before sending it to the firmware. And also create a set of configurations for devices that use shared clocks and need this extra bit to be set. Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <[email protected]>
2017-12-02Merge tag 'iwlwifi-next-for-kalle-2017-11-29' of ↵Kalle Valo1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi updates for v4.16 * Rename the temporary name A000 to 22000; * Change in the way we print the firmware version; * Remove some unused code; * Other small improvements; kvalo: There were conflicts, I fixed them with taking into account commit c2c48ddfc8b0 ("iwlwifi: fix firmware names for 9000 and A000 series hw"): CONFLICT (content): Merge conflict in drivers/net/wireless/intel/iwlwifi/iwl-config.h CONFLICT (modify/delete): drivers/net/wireless/intel/iwlwifi/cfg/a000.c deleted in ca495785063c428641cc6df8888afd2587ca6677 and modified in HEAD. Version HEAD of drivers/net/wireless/intel/iwlwifi/cfg/a000.c left in tree.
2017-11-28iwlwifi: rename the temporary name of A000 to the official 22000Luca Coelho1-10/+10
The family name A000 was just a place-holder when we didn't know what the official name would be yet. Now we know that the family name is 22000, so rename all occurrences accordingly. Signed-off-by: Luca Coelho <[email protected]>
2017-11-16iwlwifi: fix PCI IDs and configuration mapping for 9000 seriesLuca Coelho1-0/+5
A lot of PCI IDs were missing and there were some problems with the configuration and firmware selection for devices on the 9000 series. Fix the firmware selection by adding files for the B-steps; add configuration for some integrated devices; and add a bunch of PCI IDs (mostly for integrated devices) that were missing from the driver's list. Without this patch, a lot of devices will not be recognized or will try to load the wrong firmware file. Cc: [email protected] # 4.13 Signed-off-by: Luca Coelho <[email protected]>
2017-11-03iwlwifi: remove dead code for internal devices onlyEmmanuel Grumbach1-3/+0
We had a bunch of code that was relevant for internal devices only. Those devices are now being depreceated. Kill all the now unneeded code. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-10-18iwlwifi: define minimum valid address for umac_error_event_table in cfgLuca Coelho1-0/+1
We now have two different minimum valid values for umac_error_event_table. To avoid hardcoding the minimum value in the driver, add a value to cfg where it can be read from. Signed-off-by: Luca Coelho <[email protected]>
2017-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo1-2/+14
Mark Brown reported that there are conflicts in iwlwifi between the two trees so fix those now.
2017-10-06iwlwifi: pcie: dynamic Tx command queue sizeShahar S Matityahu1-0/+3
Devices in the A000 family can use a different size for the command queue. To allow this, make the command queue size configurable and set the size for A000 devices to 32. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-10-06iwlwifi: nvm: set the correct offsets to 3168 seriesChaya Rachel Ivgi1-2/+14
The driver currently handles two NVM formats, one for 7000 family and below, and one for 8000 family and above. The 3168 series uses something in between, so currently the driver uses incorrect offsets for it. Fix the incorrect offsets. Fixes: c4836b056d83 ("iwlwifi: Add PCI IDs for the new 3168 series") Signed-off-by: Chaya Rachel Ivgi <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo1-4/+4
Stephen Rothwell reported quite a few conflicts in iwlwifi between wireless-drivers and wireless-drivers-next. To avoid any problems later in other trees merge w-d to w-d-next to fix those conflicts early.
2017-08-18iwlwifi: distinguish different RF modules in A000 devicesTzipi Peres1-1/+3
Newer versions of A000 devices come with two diffenent RF modules. The PCI_ID, the subsystem ID and the RF ID are identical in these two cases, so we need to differentiate them by using the CSR_HW_RF_ID register- in order to load the appropriate firmware. Signed-off-by: Tzipi Peres <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-08-09iwlwifi: add support of FPGA fwTzipi Peres1-0/+1
Load FW according to NIC type, taking into account simulation, if exists. This is determined by a prph register. Signed-off-by: Tzipi Peres <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-08-01iwlwifi: fix fw_pre_next_step to apply also for C stepHaim Dreyfuss1-4/+4
C step NICs should use the latest FW (currently B step). Correct the condition to make C step NICs advanced its default FW name to the latest one. Also rename _next_ to b_or_c to avoid confusion. Fixes: 5da083d1922c ("iwlwifi: add support for 9000 HW B-step NICs") Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-29iwlwifi: add the new a000_2ax seriesTzipi Peres1-0/+1
Add a new config struct for the new a000 2ax series and add the five PCI ID for it. Signed-off-by: Tzipi Peres <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.