Age | Commit message (Collapse) | Author | Files | Lines |
|
Indicate to the firmware for each station whether or not MFP
is used with this station. Note that we indicate MFP for it
before authorized since we don't know yet, and that will make
the firmware not handle should-be-protected management frames
without being able to check them.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230601095201.b1052f39af4c.I1b46b751d5808e65ea3d0e7b8b38209c5aecf042@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Remove the check for the IMR debug data size which
leads to dead code.
Signed-off-by: Mukesh Sisodiya <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230531194630.58eec8d40729.Ifb7d64706eed45726db804f36e785283dff7adab@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add 2 new entries for Dell in PPAG approved list.
Signed-off-by: Alon Giladi <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230531194630.a2696f0538ef.I324e4a0cc4696c27830a490b79c42dfeff8ba074@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
There are mainly two types of BTM (BSS Transition Management)
requests, recommendations and notifications. For the first type,
a response is needed otherwise, most probably the STA will be
disconnected.
Since we don't want to wake up the host on it, set the BTM to reject
offload flag (if the device supports it) and rely on the FW to take
care of it. The FW will reject the BTM request and in case the AP
sends DEAUTH the FW can wake up the host to let it decide on the
next steps.
Signed-off-by: Haim Dreyfuss <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230531194629.d95ae6f2804c.I9457acc55bc23ce715c714b5088058f52540c224@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add two new vendors to the PPAG approved vendor list
as Google OEMs.
Signed-off-by: Golan Ben Ami <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230531194629.b89a3f9e3ae0.Iab1e13285c58ef1fee2a8bad8429eda4547b0b74@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Calling this IWL_RX_PHY_DATA1_EHT_B0 is just confusing,
it's the RU allocation bit 0. Also then align the name
for B1-B7 accordingly.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230531194629.824edb28c0eb.Ia9f74573e3ac771911b679558984f1bfb36de674@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add support for the MCC update response version 8.
Versions 5-6 are already covered by the existing
flags conversion, and 7 isn't used.
The capabilities field in iwl_mcc_update_resp is 32 bits
wide now, and the flags moved, so some more changes are
needed.
While at it, convert the flags to bool (to avoid having
to deal with BIT(16) specially etc.) and use the
struct_size() macro for the memory allocation.
Signed-off-by: Abhishek Naik <[email protected]>
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230524203151.fd9016f8f994.Ibddcb9fbfa74895f742c0ac20968720691c94853@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Allows the China bit in the ppag flags to turn on also when
FW cmd version is 1 (if FW has the capability).
Signed-off-by: Alon Giladi <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230524203151.3cc19e799eeb.I9054b1d63fd7ae2b5f0e416825b4b1dc9f79cc80@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add new oem/odm pair to ppag approved vendors list
when specified by platform.
Signed-off-by: Ariel Malamud <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230524203151.549a57a1cf11.I7392b1cd31f4f7ee60aafe2093f4e82b1d6fd3a7@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
In the following notifications and commands mac_id was replaced
with link_id:
* CANCEL_CHANNEL_SWITCH_CMD
* CHANNEL_SWITCH_START_NOTIF
* CHANNEL_SWITCH_ERROR_NOTIF
The logic around was not changed, so only adjust handling
mac/link id.
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230524203151.6aa6e394f5fe.Ie9e78918511ca901f9f3966d774fa74a71a186e3@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The firmware added new fields to be able to pass the link_id as the AP
knows it and the esr_transition_timeout.
For now, pass only the link_id since we don't have access to the
esr_transition_timeout yet.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230524203151.bf80ce717458.Icd4174911227c00cd12783fe1f517ae8097809b9@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This new version of missed beacon notification uses link_id
instead of mac_id. Also add an option to use link id for
retrieving vif.
Signed-off-by: Yedidya Benshimol <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230524203151.17fe1cc632f1.Id1fabb532e2174712fe17d4ad86a2c8c64ae84da@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Fix a spelling mistake.
Fixes: e8e10a37c51c ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Signed-off-by: Alon Giladi <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230514120631.fdd07f36a8bf.I223e5fb16ab5c95d504c3fdaffd0bd70affad1c2@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The DBGI dump is (unsurprisingly) of type DBGI, not SRAM.
This leads to bad register accesses because the union is
built differently, there's no allocation ID, and thus the
allocation ID ends up being 0x8000.
Note that this was already wrong for DRAM vs. SMEM since
they use different parts of the union, but the allocation
ID is at the same place, so it worked.
Fix all of this but set the allocation ID in a way that
the offset calculation ends up without any offset.
Fixes: 34bc27783a31 ("iwlwifi: yoyo: fix DBGI_SRAM ini dump header.")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230514120631.19a302ae4c65.I12272599f7c1930666157b9d5e7f81fe9ec4c421@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
We should pass the newly allocated data to fill.
Signed-off-by: Alon Giladi <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230418122405.aaa6d8874442.I734841c71aad9564cb22c50f2737aaff489fadaf@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Fix a memory leak that occurs when reading the fw_info
file all the way, since we return NULL indicating no
more data, but don't free the status tracking object.
Fixes: 36dfe9ac6e8b ("iwlwifi: dump api version in yaml format")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230418122405.239e501b3b8d.I4268f87809ef91209cbcd748eee0863195e70fa2@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The firmware no longer wants the beacon template inside the MAC command.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230417113648.92aed4180a06.I277efa343c88081cb3fc890dcbeae3161cdffe16@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Newer firmware images have a TLV advertising how many
beacons they support, use that to permit adding more
links in AP mode (FW needs to support at least as many
links as beacons).
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230416154301.0d7522533557.Ic6b5992e94446c35cb0f3add019defa6e7aded2a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The firmware split the HE support field into HE and "pseudo HE",
the latter is really for AP and doesn't implement trigger frame
handling for example.
Use the new field for AP mode.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230416154301.34dbfefe2a49.I0e39cd35dbe03ff9209b26733746479eae1c8966@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Clang static analysis reports this representative issue
dbg.c:1455:6: warning: Branch condition evaluates to
a garbage value
if (!rxf_data.size)
^~~~~~~~~~~~~~
This check depends on iwl_ini_get_rxf_data() to clear
rxf_data but the function can return early without
doing the clear. So move the memset before the early
return.
Fixes: cc9b6012d34b ("iwlwifi: yoyo: use hweight_long instead of bit manipulating")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230414130637.872a7175f1ff.I33802a77a91998276992b088fbe25f61c87c33ac@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Enable the new FW API with MLD based on FW TLV.
Signed-off-by: Miri Korenblit <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230414130637.5dc66b08539e.I1c65024c879346b0349e1e431d36ec2b5fd85dd7@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
In case of UHB scan that follows a scan on legacy bands,
consider both scan commands as part of the same scan cycle,
and thus configure them to use the same antenna configuration.
Signed-off-by: Ayala Beker <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230413213309.fd582c423ad8.I35239f94cb3ee1642d16936199c336a07ec2df8f@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
When NIC is in a bad state, reading data will return 28 bits as
0xa5a5a5a and the lowest 4 bits are not fixed value.
Mask these bits in a few places to skip the dump correctly.
Fixes: 89639e06d0f3 ("iwlwifi: yoyo: support for new DBGI_SRAM region")
Signed-off-by: Daniel Gabay <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230413213309.df6c0663179d.I36d8487b2419c6fefa65e5514855d94327c3b1eb@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Driver is using the dump name generated first time in all
generated dump in case of NMI.
The validity of dump name should be with each dump created
and need to reset after each use.
Fixes: 834f920ef34b ("wifi: iwlwifi: yoyo: Add driver defined dump file name")
Signed-off-by: Mukesh Sisodiya <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230413213309.6c987f820557.I924f2eae1eef2fe82c7a23be566551653d46f729@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
As part of version 2 we don't need to have wake_packet_bufsize
and wake_packet_length. The first one is already calculated by the driver,
the latter is sent as part of the wake packet notification.
Signed-off-by: Haim Dreyfuss <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230413213309.3b53213b10d4.Ibf2f15aca614def2d262dd267d1aad65931b58f1@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Starting from version 4 of ANT_GAIN_CMD verification of ppag table
values is done by the FW. Driver has to send the complete table as
it appears in the BIOS. Make this change.
Signed-off-by: Alon Giladi <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230413213309.a965365e2336.I1081f00ae309d9225d0529fa2da6ba7e34a8bd4f@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add debug print for different FW program counter details of
different CPU. Program counter pc details will be read from
TLV during init.
Signed-off-by: Mukesh Sisodiya <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230413213309.862790d336a9.I34e2ea05a79e8b2552f7f221bacf3af0166cb9c0@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Driver uses link_id as an index in the array. FW currently can
support only 2 concurrently active links per vif with the ids in the
range 0-3. Add a mapping of dirver link ids to fw link id and track the
number of active link ids.
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230328104949.a53e5df49c33.I02b25648d2d5ca370c0697bf19d0d34724eae8a1@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
HE/EHT support is reported to FW if there's at least one link
that supports it. Configure beacon separately for each link.
Don't send the beacon template before adding the MAC.
Co-developed-by: Johannes Berg <[email protected]>
Co-developed-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230328104949.5ef4efeda2dd.I6ebda2b71c964b9aa63240c9fa1ee0d28099fe6e@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The LINK cmd host api has been updated. Align the driver to the
new changes. Also, temporary use mac_id for link_id.
Using the phy_id as the link_id is wrong since we might have 2 macs
operating on the same phy - in this case we will have 2 different
links (one for each mac) with the same link_id. On the other hand,
since we don't have MLO implemented yet, we won't have 2 different
links of the same mac. Therefore, we can use the mac_id as the
link_id.
Signed-off-by: Miri Korenblit <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230328104948.78ae716884fe.Icfeb2794d9652baaccf9b0cdddbd751d0db4f952@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add an MLD version of the remain_on_channel and
cancel_remain_on_channel callbacks.
Signed-off-by: Miri Korenblit <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230328104948.b51813dbebd4.Ia25bbd63d3138e4759237ce2be0cd0436fe01c0a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add debugfs file in mvm to retrieve TAS status per LMAC,
TAS block list, current mcc, OEM name and OEM allowed list.
Signed-off-by: Abhishek Naik <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230320122330.8efc8c41efae.I94e1a6efb9c33e2cdbcf4bf3ed2384005397dee9@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Check hardware/firmware support and enable TX beacon protection
as well if supported, programming the key into the firmware as
usual.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230320122330.6a90a4f4f469.Ia028dea75f9a8eed40786d876d51f97fb3142688@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
For TM/FTM frames, report the hardware timestamps reported by the
fw as part of the RX/TX status. Since the fw reports the timestamps
in a dedicated notification (and not as part of the RX/TX status),
hold the frame until the fw timestamps notification is received.
Timestamping is enabled when a station is connected and disabled
when disconnected. For AP interface, only the first station will
have timestamping enabled since the fw only supports timestamping
for one peer.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230320122330.e0392d498101.I9bf12c8ecfb3f17253a13dc48a48647ddd6e7855@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
If the firmware supports reading synced GP2/ATRB timestamps,
read the synced timestamps from firmware instead of reading the
GP2 register and the system time separately. Reading the synced
time from firmware should be more accurate.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230320122330.a6be5f0b5580.Idedb496a5943fa496143066ffbed08185a8c4582@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
There are a number of issues here:
* if trans->reduce_power_loaded is already true, we call
iwl_trans_set_reduce_power() with an uninitialized len
value
* in this case we also clobber a previous load/setting
* if iwl_uefi_get_reduced_power() returns an ERR_PTR() we
try to kfree() it
Move the iwl_trans_set_reduce_power() call into the success
case only to fix these issues.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230314194113.aa2cf2281f5d.I33b4ab3427f1921c184c52fecd0f46781a89dc8a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Spelling mistakes (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230314194113.fb2fc470e949.I1f3a347b533bcdb6bcd310f752ab3349800efb49@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
As a part of the new MLD FW API changes, we have new commands for STA
related operations (add/remove/aux/disable tx).
Add structures and enum definitions, along with part of the functions
that sends this commands.
This functions will be in used and more will be added in the next patches.
Signed-off-by: Miri Korenblit <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230314194113.132873ce015c.I7b12a77e5be066730762e6ceeeaa7190293c3df1@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
As a part of the new MLD FW API changes, we have a new LINK command
to add/remove/configure a link.
Add structures and enum definitions, along with the functions that
sends this command (i.e. add, remove and change mac ctxt).
These functions will be in used in the next patches.
Signed-off-by: Miri Korenblit <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230314194113.d7808329effb.I13bea2db206b78540bc866bc3ab755ad5be78c53@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
As a part of the new MLD FW API changes, we have a new MAC CTXT command.
Add structures and enum definitions, along with the functions that
sends this command (i.e. add, remove and change mac ctxt).
This functions will be in used in the next patches.
Signed-off-by: Miri Korenblit <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230314194113.99a41a5bc55f.I310312c829f5f2f69b64fcddce487b1eab80165b@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add driver defined dump file name extension for beacon loss
and FW Assert case.
Signed-off-by: Mukesh Sisodiya <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230314194113.2a2ee92995e9.I38fff588e32276796cd757309fc811241f827c7a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add tlv in dump file for dump file name extension.
Signed-off-by: Mukesh Sisodiya <[email protected]>
Signed-off-by: Greenman, Gregory <[email protected]>
Link: https://lore.kernel.org/r/20230314194113.ffc28212994e.Ie5f10709548497061f95c1634d942dd2facf72ec@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
FW new API added the info missing for update RU allocation,
so use the new API to update radiotap information.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230305124407.b16acaa4bad1.I53afa03058dbd2cd8afbaf5e82596c8ed501a476@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
VHT, HE and EHT rates use the same bits for NSS, so no need for
defines per PHY version.
Also use spatch to replace bit manipulation with FIELD_GET:
@@
identifier rate;
@@
-((rate & RATE_MCS_NSS_MSK) >> RATE_MCS_NSS_POS)
+FIELD_GET(RATE_MCS_NSS_MSK, rate)
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230305124407.167ed9477aa8.Ibd8e71d31896e8d8f067ce4e3a6e9a0e86c78f3f@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
In EHT sniffer mode DW4 is all used for sniffer data (unlike we have in
HE mode), so move the full DW4 into a union, and we extract the new data5
used for parsing USIG info and set all to radiotap TLVs with the
extracted data.
Also parse OFDM_RX_VECTOR_USIG_A1_OUT and OFDM_RX_VECTOR_USIG_A2_OUT for
rx_no_data notification.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230305124407.557d3870753b.I4e9fa4d21900a187753529d46956ba2a7ee75fda@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The type RX_NO_DATA_INFO_TYPE_HE_TB_UNMATCHED is applied to all TB
frames including EHT mode, so rename accordingly.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230305124407.e4f51f347e48.I2d6ecb6eadc95666d2ef9794662ee779488ceac1@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Update all radiotap EHT TLVs that we can extract from data0 in HW.
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230305124407.730f219e02ee.Ife3dd85c65758694d7602e8bc8660887d77faacf@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
rate_n_flags is always present in the data so at least give all of
the information we can extract from rate_n_flags
Signed-off-by: Mordechay Goodstein <[email protected]>
Signed-off-by: Gregory Greenman <[email protected]>
Link: https://lore.kernel.org/r/20230305124407.b1c7d49ad35e.Ie2412ac6f88700aa3767ff95ffb52a806b13b7ce@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Read the STEP equalizer parameters from the BIOS during init
and transfer it to the firmware.
This table provides values to configure an equalizer at the transmitter
that can be used to compensate for PCB channel attenuation.
Signed-off-by: Ayala Barazani <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.f25f871c5e17.I8390ab916c8f681229433ebc576ed37a594c6d30@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|
|
We add TSF overwrite for EHT MU/TB high and low, and add definitions
for EHT Data 5 meta data.
Signed-off-by: Mordechay Goodstein <[email protected]>
Link: https://lore.kernel.org/r/20230127002430.6729c0be66aa.I95ad94d5e137ec80010facd8ee57cd40461a0721@changeid
Signed-off-by: Gregory Greenman <[email protected]>
|