Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This is not mvm specific
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241028135215.acb45e8c4a78.I58736fd85d82a1fe641e75037b77878854a91e50@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Those macros are currently in fw/api/binding.h, which should really not
be included in newer code, where this API is not used.
Just move it.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20241028135215.48443f1c1819.I1cfe8c6c58153031d44f81edc0f8731077666355@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
If the NIC is dead upon resume, try to catch the error earlier and exit
earlier. We'll print less error messages and get to the same recovery
path as before: reload the firmware.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241028135215.3a18682261e5.I18f336a4537378a4c1a8537d7246cee1fc82b42c@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add support for range_request_cmd version 15. This version adds a
testing option flag to use bad secure LTF Tx key. The command struct
itself is not changed.
Add support for responder config command version 11. This version only
adds a flag which is part of the MVM_FTM_RESP_FLAGS and does not
require any special handling.
Signed-off-by: Avraham Stern <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241028135215.264826832f16.Iad4fdcd177a9c4bcb0839d3f87c793b4f83eb2c7@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add support version 7 of wowlan_config_cmd and version 5 of
iwl_wowlan_info_notif
This version is mainly a cleanup of the previous version.
Two fields were removed as the device already handled this data.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241028135215.d2afdf720073.I9901c8c4ad4508135d019efa213b1430acc70746@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Cross-merge networking fixes after downstream PR (net-6.12-rc6).
Conflicts:
drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c
cbe84e9ad5e2 ("wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd")
188a1bf89432 ("wifi: mac80211: re-order assigning channel in activate links")
https://lore.kernel.org/all/[email protected]/
net/mac80211/cfg.c
c4382d5ca1af ("wifi: mac80211: update the right link for tx power")
8dd0498983ee ("wifi: mac80211: Fix setting txpower with emulate_chanctx")
drivers/net/ethernet/intel/ice/ice_ptp_hw.h
6e58c3310622 ("ice: fix crash on probe for DPLL enabled E810 LOM")
e4291b64e118 ("ice: Align E810T GPIO to other products")
ebb2693f8fbd ("ice: Read SDP section from NVM for pin definitions")
ac532f4f4251 ("ice: Cleanup unused declarations")
https://lore.kernel.org/all/[email protected]/
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
SAR table format in ACPI and local data base are different,
So modified code to read data properly.
Signed-off-by: Anjaneyulu <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241010140328.f077aced4dee.I4dc618f12d01f7ad19f9f8881f6e09eea77e9a14@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
When starting the suspend flow, HOST_D3_START triggers an _async_
firmware dump collection for debugging purposes. The async worker
may race with suspend flow and fail to get NIC access, resulting in
the following warning:
"Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)"
Fix this by switching to the sync version to ensure the dump
completes before proceeding with the suspend flow, avoiding
potential race issues.
Signed-off-by: Daniel Gabay <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241010140328.9aae318cd593.I4b322009f39489c0b1d8893495c887870f73ed9c@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
We require a message, but the macros shouldn't require a
formatted message, a constant one can be fine. Change the
macros to support that.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241008072037.96e8554cb7a2.I0e06d8fd49f86bd4e9e216fc2265c43d7e78a095@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add a function for getting the error status and error
code for given error table.
Remove a static function of same purpose from mvm/d3.c
Signed-off-by: Yedidya Benshimol <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241008072037.610a38614ce6.Iab5f795bc30ce5d08550cff1772fe051527bcb95@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The flags_mask field is becoming reserved, and a new bandwidth
request is being added for RX OMI purposes. Support the new API
version as preparation.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20241008072037.437c6573df3c.I03612cb6cf47b12038c1db11b95a554cdea714e9@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d151 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b428 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/[email protected]
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
These are not mvm specific
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20240901071542.22e28b56da2c.Ib859a05ed133fa5a1426c5feffa8999a18bba6f2@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This is not mvm specific.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20240901071542.57efe93c2702.I4619885f691cc295cc440a62f23405392da338f4@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This strcuture is not specific to mvm, so rename it.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20240901071542.39c9ceea41d3.I2a06bfca589c467fa84ad82ff86e73ec82e72a5e@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This isn't mvm specific.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20240901071542.5d71a0a2b56c.I7e0fe636d914852963e7a2f5e6037d0c3e367145@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
When we de-activate a link because it started a CSA with mode=1, we want
to tell the firmware it can no longer transmit any frame for that link.
The firmware will do that on its own if the CSA indication (beacon /
action frame) was received on that same link, but with MLO, things got
more complex and the firmware can't track cross link CSA.
Tell the firmware if we de-activate a link because of CSA with mode=1 to
prevent it from transmitting, even if it is only an NDP PM=1 frame that
is part of the de-activation flow.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240901071542.4bef89d438d4.If7147a7a84054e67c05414c753d73f4e2e0e6e37@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The channel number is at the same position across all versions
of the channel description struct, so move it out of the union
that versions it. Also add __packed annotations to all of the
sub-structs and the union so it's packed correctly, and fully
document the structure.
Signed-off-by: Johannes Berg <[email protected]>
Reviewed-by: Ilan Peer <[email protected]>
Reviewed-by: Daniel Gabay <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240901071542.e31623ae4201.I1ea69a8ec3d39492f39d84e31fb105b159359c28@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Block other mcc expect CN from WRDD ACPI.
Signed-off-by: Anjaneyulu <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240808232017.fe6ea7aa4b39.I86004687a2963fe26f990770aca103e2f5cb1628@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Take the proper action upon EML OMN frame failure.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240825090005.01ff45fa69db.I9f2d3ea851050f6031ac07bbe69eb38000fd5683@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
When the firmware fails to send EML OMN frames, it notifies the host and
the host need to take proper action.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240808232017.0c6bc216ef8c.Ida85d2062734a569e1af35f47d14cc5bb4bf893e@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Note that the new API does not have the same notification ID as the
previous notification: the new notification belongs to the group 0x3.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240808232017.4ea52360b32e.Ibc25dcabd8aeadda906549482a6c77bc42fb55bb@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
A new version is coming up. Rename the current struct to include the
current version.
s/iwl_missed_beacons_notif/iwl_missed_beacons_notif_v4
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240808232017.b5c3a83a05ef.I698611582b5ca8395f42a535c51f7230307e2c6f@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add support for enabling channel puncturing for US/CAN based
on BIOS configuration through UEFI
Signed-off-by: Somashekhar(Som) <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240729201718.828f3ecf5118.I5561ab8c7cd48ad4e5d6daf21b037bf88c619a4a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This will help to dump the firmware logs at the right spot if needed.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240729201718.3a91e89e32f8.Ieb28d7756c47dee52c912a71abe82fa0b08b19da@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
We have a new notification the BT profile. It contains almost nothing,
only the wifi loss information. Copy this into mvm. We still need to
iterate over the vifs / links to use this data.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240729201718.637499f3a85a.I8bf654cf5d8aa038100273876c936845ecc338f7@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The iwl_bt_coex_profile_notif is now being obsoleted. It'll be replaced
by a new notification coming with a non-legacy group. Rename it to avoid
confusion.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240729201718.dc29fd0d7817.I5881fce86ec8b76ae98d2948265434b8e7d860c1@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
When the upper layer requests to cancel an ongoing scan, a race
is possible in which by the time the driver starts to handle the
upper layers scan cancel flow, the FW already completed handling
the scan request and the driver received the scan complete
notification but still did not handle the notification. In such a
case the FW will simply ignore the scan abort request coming from
the driver, no notification would arrive from the FW and the entire
abort flow would be considered a failure.
To better handle this, check the status code returned by the FW for
the scan abort command. In case the status indicates that
no scan was aborted, complete the scan abort flow with success, i.e.,
the scan was aborted, as the flow is expected to consume the scan
complete notification.
Signed-off-by: Ilan Peer <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The firmware needs to know what we had in the HE CAP, propagate that
setting to the firmware through the LINK command.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240729201718.fef270d2995b.I328237837df30e1cb98764987eaaf8e8993e058c@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
These are not mvm specific.
Signed-off-by: Miri Korenblit <[email protected]>
Reviewed-by: Emmanuel Grumbach <[email protected]>
Link: https://patch.msgid.link/20240729201718.939b32f84f46.I293957bf172680871eba24448d9d1870e49100b6@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
New API versions are coming up for this command.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240729201718.7ec1527be98c.I52dede6532bc61041c441caee5273734f14a1d78@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
* Rename iwl_dev_tx_power_cmd to iwl_dev_tx_power_cmd_v3_v8
* struct iwl_dev_tx_power_common needs to be packed. It was always the
case, but now that its size is not a multiple of 4, it becomes
meaningful.
* Move per_band data out of the common structure since it won't be
present in the new versions of the command.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240729201718.8da29a66984f.I922bdef4740d990f98cb452e858c4157bbc491c5@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
When the firmware crashes, we first told the op_mode and only then,
changed the transport's state. This is a problem if the op_mode's
nic_error() handler needs to send a host command: it'll see that the
transport's state still reflects that the firmware is alive.
Today, this has no consequences since we set the STATUS_FW_ERROR bit and
that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording
looks at this bit to know not to send a host command for example.
To fix the hibernation, we needed to reset the firmware without having
an error and checking STATUS_FW_ERROR to see whether the firmware is
alive will no longer hold, so this change is necessary as well.
Change the flow a bit.
Change trans->state before calling the op_mode's nic_error() method and
check trans->state instead of STATUS_FW_ERROR. This will keep the
current behavior of iwl_fw_dbg_stop_restart_recording upon firmware
error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording
safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not
alive.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid
[I missed this was a dependency for the hibernation fix, changed
the commit message a bit accordingly]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Check size of WGDS revision 3 is equal to 8 entries size with some header,
but doesn't depend on the number of used entries. Check that used entries
are between min and max but allow more to be present than are used to fix
operation with some BIOSes that have such data.
Fixes: 97f8a3d1610b ("iwlwifi: ACPI: support revision 3 WGDS tables")
Signed-off-by: Anjaneyulu <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240825191257.cc71dfc67ec3.Ic27ee15ac6128b275c210b6de88f2145bd83ca7b@changeid
[edit commit message]
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add support for activate/deactivate unii4 in USA, Canada and WW by
reading DSM function 8 from UEFI or ACPI and sending it to the FW.
Signed-off-by: Anjaneyulu <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703125541.674604cbb6d1.Ibb946ae8ce7a760940a3c9d101e7f4f1808c43e4@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
The v1/v3 remaining bits are not annotated in kernel-doc,
fix that.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703125541.d7adf8b235fe.I91f75e292d1648f61e5e341e1fe58096f858853d@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This is not documented correctly, fix it.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703125541.2ff5ee61e9ec.I3a1299061e472490c38a9fff4bea319ba20f313a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Document the puncture_mask field in the PHY context.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703125541.8ba6536ea36b.I181d8da205a14f4fcbf1d8cc6011dcf194a1638a@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Fix kernel-doc for MAC context APIs.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703125541.a7179f1b0e7e.Idd7ce381960707978ff0b16035101a2a725a4fd9@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Add the missing special_mem union member and use constant
formatting (%) for the type constants.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240703125541.9344b2b94d45.Id770b4f1893308ba43fc039a8851c526312ad2b5@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Fix kernel-doc warnings in datapath.h.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240625194805.1a644d4c38f4.I6060819da2bfc948bee089a91626ff474300a896@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
Fix all the prototype mismatch and "wrong kernel-doc identifier"
warnings, due to typos in or misformatting of the kernel-doc.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240625194805.6ec65cf9b88c.I7804114d7369f352e80a0e8430f7119af8e210de@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
There are naming issues of structs vs. kernel-doc,
fix some that I noticed now.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240625194805.4c530804b4ff.I68b894b9cdbd9560d86b92646e9b6b17a6d5117e@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
We don't use the new field, but at least, document the change.
Signed-off-by: Emmanuel Grumbach <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240625194805.3d7887e2e374.I37bf709969d069ff0392e0976e62e06fb7a87bc9@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
These are not MVM specific.
Signed-off-by: Daniel Gabay <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240625194805.09f672318944.Idffeab6a4dfc12effebd1c50815ae5c540afca74@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
When UATS isn't enabled (no VLP/AFC AP support), we need to still
set the right bits in the channel/regulatory flags, so remove the
uats_enabled argument to the parsing etc.
Also, firmware deals just fine with getting the UATS table if it
supports the command even if the bits aren't set, so always send
it, since it's also needed if BIT(31) is set, but the driver need
not have any knowledge of that. Remove 'uats_enabled' entirely.
Fixes: 0d2fc8821a7d ("wifi: iwlwifi: nvm: parse the VLP/AFC bit from regulatory")
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://patch.msgid.link/20240618195731.a81e7234c4f6.Ic0131180d38e0f1ead2f7fa0e7583407ceaa0bd1@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This is the first step towards removing the P2P Device MAC.
Use ROC (which uses the AUX MAC) for P2P Device
discoveribility and action frames.
Signed-off-by: Shaul Triebitz <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <[email protected]>
|
|
This needs to include dbg-tlv.h since it uses the value of
IWL_FW_INI_ALLOCATION_NUM from that file.
Signed-off-by: Johannes Berg <[email protected]>
Signed-off-by: Miri Korenblit <[email protected]>
Link: https://msgid.link/20240605140327.2d25691283eb.I0909621a0e293a8a21d4f1de6e5fd59c22e4b212@changeid
Signed-off-by: Johannes Berg <[email protected]>
|