aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/intel/iwlwifi/fw/file.h
AgeCommit message (Collapse)AuthorFilesLines
2019-05-05Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of ↵David S. Miller1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.2 Most likely the last patchset of new feature for 5.2, and this time we have quite a lot of new features. Most obvious being rtw88 from Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We have also new hardware support for existing drivers and improvements. There's one conflict in iwlwifi, my example conflict resolution below. Major changes: iwlwifi * bump the 20000-series FW API version * work on new hardware continues * RTT confidence indication support for Fine Timing Measurement (FTM) * an improvement in HE (802.11ax) rate-scaling * add command version parsing from the fimware TLVs * add support for a new WoWLAN patterns firmware API rsi * add support for rs9116 mwifiex * add support for SD8987 brcmfmac * add quirk for ACEPC T8 and T11 mini PCs rt2x00 * add RT3883 support qtnfmac * fix debugfs interface to support multiple cards rtw88 * new driver mt76 * share more code across drivers * add support for MT7615 chipset * rework DMA API * tx/rx performance optimizations * use NAPI for tx cleanup on mt76x02 * AP mode support for USB devices * USB stability fixes * tx power handling fixes for 76x2 * endian fixes Conflicts: There's a trivial conflict in drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be just empty: diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h index cd622af90077,b0671e16e1ce..000000000000 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h ==================== Signed-off-by: David S. Miller <[email protected]>
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-6/+9
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <[email protected]>
2019-04-29iwlwifi: parse command version TLVJohannes Berg1-0/+17
In newer firmware images there's a command version TLV that states, for each listed command or notification, which version of the command and/or notification structure is used. Read and keep this data to be able to use it in the future. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-29iwlwifi: support fseq tlv and print fseq versionShahar S Matityahu1-5/+9
Support fseq tlv and print fseq version to dmesg. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-29iwlwifi: mvm: support v2 of the WoWLAN patterns commandLuca Coelho1-0/+1
Add new definitions for the WoWLAN patterns API version 2 and support for version 2 of the WoWLAN patterns command without implementing the new features. With this commit we only supporting the existing bitmask pattern match. Use the new version only if the TLV is set. Signed-off-by: Luca Coelho <[email protected]>
2019-04-19iwlwifi: mvm: support rtt confidence indicationAvraham Stern1-0/+1
The range response notification API has changed to add a value that indicates the confidence of the rtt result. Support the new API and print the rtt confidence for debug. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-04-18iwlwifi: dbg_ini: check debug TLV type explicitlyShahar S Matityahu1-6/+9
In ini debug TLVs bit 24 is set. The driver relies on it in the memory allocation for the debug configuration. This implementation is problematic in case of a new debug TLV that is not supported yet is added and uses bit 24. In such a scenario the driver allocate space without using it which causes errors in the apply point enabling flow. Solve it by explicitly checking if a given TLV is part of the list of the supported ini debug TLVs. Signed-off-by: Shahar S Matityahu <[email protected]> Fixes: f14cda6f3b31 ("iwlwifi: trans: parse and store debug ini TLVs") Signed-off-by: Luca Coelho <[email protected]>
2019-04-03iwlwifi: mvm: support HE context cmd API changeSara Sharon1-0/+3
Support API change to pass all mbssid parameters to the firmware. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-03-22iwlwifi: mvm: Support new format of SCAN_OFFLOAD_PROFILES_QUERY_RSPIlan Peer1-0/+4
Newer FWs use a new format of the SCAN_OFFLOAD_PROFILES_QUERY_RSP, which now supports indicating match on an higher number of channels. Modify the code to support both the old format and the newer one, based on a FW TLV. Signed-off-by: Ilan Peer <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-03-22iwlwifi: support new NVM response APIShaul Triebitz1-0/+3
Support REGULATORY_NVM_GET_INFO_RSP_API_S_VER_4. This API adds the new 6-7GHz channels. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-03-22iwlwifi: mvm: track CSA beaconsSara Sharon1-0/+2
Send to FW modify command for every beacon we receive during channel switch. FW will track the count, and make sure the event is scheduled in time even if AP changed count. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: mvm: add support for new FTM fw APIAvraham Stern1-0/+5
The FTM new API uses API TLV bit 15. The driver mistakenly uses this bit for beacon filter API, although no TLV was assigned for the beacon filter API. For now, make beacon filter use bit 16 instead (not set by the fw anyway). Once a TLV is assigned to the beacon filter API it should be updated. Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: add FW recovery flowMordechay Goodstein1-0/+1
Add new API and TLV for the ability to send commands in the beginning and end of reset flow. The full flow of recovery is: 1. While loading FW, get address (from the TLV) of target buffer to read in case of reset 2. If an error/assert happens read the address data from step 1. 3. Reset the HW and load the FW. 4. Send the data read in step 2. 5. Add station keys 6. Send notification to FW that reset flow is done. The main use of the recovery flow is for support in PN/SN recovery when offloaded Signed-off-by: Mordechay Goodstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: receive umac and lmac error table addresses from TLVsShahar S Matityahu1-0/+2
TLV 54 holds umac debug related addresses. TLV 55 holds lmac debug related addresses. These TLVs aim to replace the alive notification data in the future. Parse and keep error table addresses received from the TLVs for both lmac and umac and use these addresses instead of the pointer received from alive notification. The feature supports only unified image. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-14iwlwifi: mvm: support FTM responderJohannes Berg1-0/+9
Add support for FTM responder for hardware/firmware combinations that advertise support for it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Avraham Stern <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-04iwlwifi: mvm: support absolute thresholds in bf configurationAvigail Grinstein1-0/+3
Update iwl_beacon_filter_cmd to support BEACON_FILTER_CONFIG_API_S_VER_4. Currently driver configs them to be zero (i.e. disable them, so no change is applied). Signed-off-by: Avigail Grinstein <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-04iwlwifi: mvm: support new format for the beacon notificationEmmanuel Grumbach1-0/+3
The firmware is changing the format of the beacon notification to remove the dependency on the Tx response format. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-02-04iwlwifi: mvm: support CHANNEL_SWITCH_TIME_EVENT_CMD commandSara Sharon1-0/+2
When we do channel switch, we used to schedule time events ourselves. This was offloaded to FW. Support the new command and flow. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-01-29iwlwifi: mvm: Change FW channel info APIDavid Spinadel1-0/+3
Change iwl_fw_channel_info structure so it can have channel number greater than 255. This is needed for 6 GHz channel numbers. Change all relevant structs and member accesses accordingly. The new API is indicated by a TLV capability bit. Signed-off-by: David Spinadel <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-01-29iwlwifi: mvm: implement CSI reportingJohannes Berg1-1/+6
Implement CSI (channel estimation matrix) reporting in the mvm driver, if the firmware has the capability. Currently only a debugfs API is provided as the API is still under discussion. For now, RX aggregation must be disabled to use this feature on data frames as we haven't found a good way to attach the data to A-MPDUs, given complexities with multi-queue. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2019-01-29iwlwifi: remove TOF implementationJohannes Berg1-2/+0
This is an ancient (~2015) implementation that no longer matches the firmware in any way, and most likely never worked. Remove all of it so it can be reintroduced properly. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-11-23iwlwifi: trans: parse and store debug ini TLVsSara Sharon1-0/+7
The new debug ini TLVs can be either packed into firmware binary or written in external file. Support loading them from both. Store the data per apply point. Apply point is a point during driver runtime, where the TLV becomes active. For example, a trigger of hardware error may be configured to collect a subset of data pre-alive, as a opposed to HW error that occurs after alive. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-10-06iwlwifi: mvm Support new MCC update responseHaim Dreyfuss1-2/+5
Change MCC update response API to be compatible with new FW API. While at it change v2 which is not in use anymore to v3 and cleanup mcc_update v1 command and response which is obsolete. Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-09-28iwlwifi: fix LED command capability bitJohannes Berg1-1/+1
The capability bit was added to the driver and had been negotiated with the firmware, but then got forgotten in the firmware and later reused for a different capability. Now the firmware added it in a new bit. Fixes: 2eabc84d2f8e ("iwlwifi: mvm: only send LEDS_CMD when the FW supports it") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-08-31Revert "iwlwifi: allow memory debug TLV to specify the memory type"Johannes Berg1-14/+1
This reverts the addition of memory type in the memory debug TLV as the firmware never ended up implementing it, and now the PRPH dump is added as a different TLV. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: remove all occurrences of the FSF address paragraphLuca Coelho1-5/+0
The Free Software Foundation address is superfluous and causes checkpatch to issue a warning when present. Remove all paragraphs with FSF's address to prevent that. Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: mvm: support Coex Schema 2Erel Geron1-0/+2
The new coex schema requires moving to SISO only when BT AG is 4. Adjust the SISO criteria according to the coex schema version reported by firmware. Signed-off-by: Erel Geron <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: mvm: support new reduce tx power FW API.Haim Dreyfuss1-0/+3
Update reduce tx power command API to be compatible with new FW API. Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: mvm: skip EBS in low latency mode while fragmented scan isn't supportedAyala Beker1-0/+2
While associated in low latency mode, or when traffic load is high, don't enable EBS in scan request if fragmented EBS is not supported by the FW. Signed-off-by: Ayala Beker <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: mvm: support new WoWLAN status FW APILuca Coelho1-0/+1
A new FW API has been added for WOWLAN_GET_STATUSES to support multiple GTK keys and IGTK keys. Check the respective TLV and use the new API when it is set. Let most of the code use the new version (v7) and convert the old version (v6) to the new one when needed. Also refactor some functions a bit so that they can be reused more easily. Particularly the part that calls WOWLAN_GET_STATUSES which is reused in D3 and D0i3. Signed-off-by: Luca Coelho <[email protected]>
2018-08-31iwlwifi: add d3 debug data supportShahar S Matityahu1-0/+2
During d3, the firmware records debug data into internal buffer if debug data collection occurs, collect the data that was written to the buffer Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-08-02iwlwifi: mvm: remove dead gscan codeLuca Coelho1-36/+1
There was a bunch of code to support gscan which has never been used. Remove it all to cleanup and get rid of a lot of dead code. Signed-off-by: Luca Coelho <[email protected]>
2018-08-02iwlwifi: allow masking out memory areas from the fw dumpShahar S Matityahu1-0/+3
Reading and dumping memory areas takes time, and sometimes dumping all of the areas isn't necessary. Allow choosing the memory areas which should be dumped. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-04-26iwlwifi: introduce Image Loader (IML) - new firmware imageGolan Ben-Ami1-0/+3
In future devices a new image will be introduced - IML. The IML, image loader, is loaded by the ROM, and as part of the new self-init flow, loads the rest of the firmware images to the device. Store the image, so the ROM can load it to the device. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-03-28iwlwifi: wrt: add fw force restart via triggersShahar S Matityahu1-1/+11
We can set triggers that cause a debug data collection when something of interest happens (e.g. when too many probes are lost conscutively). Normally, this triggers don't cause the FW to be restarted, but in some cases that may be desired, so we recover from the problem. To support this, add a flag that indicates that the FW should be restarted when the trigger fires. Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-03-28iwlwifi: fw api: support the new scan request FW API versionAyala Beker1-0/+3
Remove fragmented_dwell_time and add num_of_fragments to support the new API version. Signed-off-by: Ayala Beker <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-03-28iwlwifi: mvm: add support for oceZamir, Roee1-0/+1
Add support for Optimized Connectivity Experience (OCE). Get capabilities from the fw, expose them with nl80211, and enable them in UMAC scan if the relevant nl80211 flags are set by the userspace. Signed-off-by: Roee Zamir <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2018-03-16iwlwifi: add shared clock PHY config flag for some devicesLuca Coelho1-0/+1
Some devices use a shared clock which is very sensitive to variations and cause trouble in some situations. We need to set a bit in the phy configuration to indicate that to the FW. To make this generic, add a extra_phy_config_flags element to the device configuration and OR it into the phy_cfg before sending it to the firmware. And also create a set of configurations for devices that use shared clocks and need this extra bit to be set. Fixes: c62446d2b028 ("iwlwifi: add new 9460 series PCI IDs") Signed-off-by: Luca Coelho <[email protected]>
2017-12-20iwlwifi: mvm: adjust to quota offloadShaul Triebitz1-0/+2
Skip Quota handling if firmware implements Quota. Signed-off-by: Shaul Triebitz <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-12-20iwlwifi: mvm: support RX flags API changeSara Sharon1-0/+3
Latest firmware calculates both phases of the TKIP field, so the TTAK ok flag is not needed and deprecated. Support this API change. Signed-off-by: Sara Sharon <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-12-20iwlwifi: support internal debug data collection for new devicesGolan Ben Ami1-4/+24
Support internal debug data collection on 9000 and newer devices. The method for finding the base and end address has changed on new HW's, so introduce a new version of debug destination tlv. Signed-off-by: Golan Ben Ami <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-12-05iwlwifi: mvm: rs: introduce new API for rate scalingGregory Greenman1-0/+2
New devices will have rate scaling algorithm running in the firmware. With this feature, the driver's responsiblity is to provide an initial configuration and to handle notifications regarding recent rates and some other parameters. Debugfs hooks will be still available for reading the current rate/statistics and setting a fixed rate. The old API is supported so far, though both APIs cannot be used simultaneously. This is the first patch in the series. It adds a new TLV specifying FW support for the new API and updates lq_sta to support two types of rate scaling. Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-12-02Merge tag 'iwlwifi-next-for-kalle-2017-11-29' of ↵Kalle Valo1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi updates for v4.16 * Rename the temporary name A000 to 22000; * Change in the way we print the firmware version; * Remove some unused code; * Other small improvements; kvalo: There were conflicts, I fixed them with taking into account commit c2c48ddfc8b0 ("iwlwifi: fix firmware names for 9000 and A000 series hw"): CONFLICT (content): Merge conflict in drivers/net/wireless/intel/iwlwifi/iwl-config.h CONFLICT (modify/delete): drivers/net/wireless/intel/iwlwifi/cfg/a000.c deleted in ca495785063c428641cc6df8888afd2587ca6677 and modified in HEAD. Version HEAD of drivers/net/wireless/intel/iwlwifi/cfg/a000.c left in tree.
2017-11-25iwlwifi: mvm: revert support new Coex firmware APIEmmanuel Grumbach1-3/+0
This new API will not be used, remove the code that supports it. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-11-15iwlwifi: mvm: support version 7 of the SCAN_REQ_UMAC FW commandLuca Coelho1-0/+1
Newer firmware versions (such as iwlwifi-8000C-34.ucode) have introduced an API change in the SCAN_REQ_UMAC command that is not backwards compatible. The driver needs to detect and use the new API format when the firmware reports it, otherwise the scan command will not work properly, causing a command timeout. Fix this by adding a TLV that tells the driver that the new API is in use and use the correct structures for it. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=197591 Fixes: d7a5b3e9e42e ("iwlwifi: mvm: bump API to 34 for 8000 and up") Signed-off-by: Luca Coelho <[email protected]>
2017-11-03iwlwifi: remove dead code for internal devices onlyEmmanuel Grumbach1-1/+1
We had a bunch of code that was relevant for internal devices only. Those devices are now being depreceated. Kill all the now unneeded code. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-10-06iwlwifi: mvm: Add new quota command APIDavid Spinadel1-0/+3
New quota command adds a field indicating low latency direction per quota. A TLV API bit was added to indicate the new API. Signed-off-by: David Spinadel <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-09-07iwlwifi: mvm: only send LEDS_CMD when the FW supports itLuca Coelho1-0/+1
The LEDS_CMD command is only supported in some newer FW versions (e.g. iwlwifi-8000C-31.ucode), so we can't send it to older versions (such as iwlwifi-8000C-27.ucode). To fix this, check for a new bit in the FW capabilities TLV that tells when the command is supported. Note that the current version of -31.ucode in linux-firmware.git (31.532993.0) does not have this capability bit set, so the LED won't work, even though this version should support it. But we will update this firmware soon, so it won't be a problem anymore. Fixes: 7089ae634c50 ("iwlwifi: mvm: use firmware LED command where applicable") Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]>
2017-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers.gitKalle Valo1-0/+2
Stephen Rothwell reported quite a few conflicts in iwlwifi between wireless-drivers and wireless-drivers-next. To avoid any problems later in other trees merge w-d to w-d-next to fix those conflicts early.
2017-08-18iwlwifi: mvm: support new Coex firmware APIEmmanuel Grumbach1-0/+3
The firmware now adds more information about time sharing with the Bluetooth core. Adapt the API structures and add the new fields in the debugfs hooks. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.