aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/hostap
AgeCommit message (Collapse)AuthorFilesLines
2010-09-29pcmcia: simplify IntTypeDominik Brodowski1-1/+0
IntType was only set to INT_MEMORY (driver pcmciamtd) or INT_MEMORY_AND_IO (all other drivers). As this flags seems to relate to ioport access, make it conditional to the driver having requested IO port access. There are two drivers which do not request IO ports, but did set INT_MEMORY_AND_IO: ray_cs and b43. For those, we consistently only set INT_MEMORY in future. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: Jiri Kosina <[email protected]> CC: [email protected] Acked-by: Gustavo F. Padovan <[email protected]> (for drivers/bluetooth) Tested-by: Wolfram Sang <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-09-29pcmcia: simplify Status, ExtStatus register accessDominik Brodowski1-3/+1
The Status (CISREG_CCSR) and ExtStatus (CISREG_ESR) registers were only accessed to enable audio output for some drivers and IRQ for serial_cs.c. The former also required setting config_req_t.Attributes to CONF_ENABLE_SPKR; the latter can be simplified to setting this field to CONF_ENABLE_ESR. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] Tested-by: Wolfram Sang <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-09-29pcmcia: move Vpp setup to struct pcmcia_deviceDominik Brodowski1-5/+5
Some drivers prefer to explicitly set Vpp. Instead of passing the voltage inside config_req_t, store it in struct pcmcia_device. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] Acked-by: Gustavo F. Padovan <[email protected]> (for drivers/bluetooth) Tested-by: Wolfram Sang <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-09-23Fix typo configue => configure in commentsThomas Weber1-1/+1
Signed-off-by: Thomas Weber <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2010-08-25Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/libertas/if_sdio.c
2010-08-24Hostap: Fix "'ret' set but not used" warning message from GCC in hostapJulian Calaby1-1/+1
CC [M] drivers/net/wireless/hostap/hostap_ioctl.o drivers/net/wireless/hostap/hostap_ioctl.c: In function 'prism2_request_scan': drivers/net/wireless/hostap/hostap_ioctl.c:1666:6: warning: variable 'ret' set but not used Signed-off-by: Julian Calaby <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds1-93/+43
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: avoid buffer overflow in pcmcia_setup_isa_irq pcmcia: do not request windows if you don't need to pcmcia: insert PCMCIA device resources into resource tree pcmcia: export resource information to sysfs pcmcia: use struct resource for PCMCIA devices, part 2 pcmcia: remove memreq_t pcmcia: move local definitions out of include/pcmcia/cs.h pcmcia: do not use io_req_t when calling pcmcia_request_io() pcmcia: do not use io_req_t after call to pcmcia_request_io() pcmcia: use struct resource for PCMCIA devices pcmcia: clean up cs.h pcmcia: use pcmica_{read,write}_config_byte pcmcia: remove cs_types.h pcmcia: remove unused flag, simplify headers pcmcia: remove obsolete CS_EVENT_ definitions pcmcia: split up central event handler pcmcia: simplify event callback pcmcia: remove obsolete ioctl Conflicts in: - drivers/staging/comedi/drivers/* - drivers/staging/wlags49_h2/wl_cs.c due to dev_info_t and whitespace changes
2010-08-04Merge branch 'for-next' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (48 commits) Documentation: update broken web addresses. fix comment typo "choosed" -> "chosen" hostap:hostap_hw.c Fix typo in comment Fix spelling contorller -> controller in comments Kconfig.debug: FAIL_IO_TIMEOUT: typo Faul -> Fault fs/Kconfig: Fix typo Userpace -> Userspace Removing dead MACH_U300_BS26 drivers/infiniband: Remove unnecessary casts of private_data fs/ocfs2: Remove unnecessary casts of private_data libfc: use ARRAY_SIZE scsi: bfa: use ARRAY_SIZE drm: i915: use ARRAY_SIZE drm: drm_edid: use ARRAY_SIZE synclink: use ARRAY_SIZE block: cciss: use ARRAY_SIZE comment typo fixes: charater => character fix comment typos concerning "challenge" arm: plat-spear: fix typo in kerneldoc reiserfs: typo comment fix update email address ...
2010-08-04Merge branch 'master' into for-nextJiri Kosina4-3/+28
2010-08-04hostap:hostap_hw.c Fix typo in commentJustin P. Mattock1-1/+1
The patch below fixes a typo in a comment. Signed-off-by: Justin P. Mattock <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2010-08-03pcmcia: do not use io_req_t when calling pcmcia_request_io()Dominik Brodowski1-17/+11
Instead of io_req_t, drivers are now requested to fill out struct pcmcia_device *p_dev->resource[0,1] for up to two ioport ranges. After a call to pcmcia_request_io(), the ports found there are reserved, after calling pcmcia_request_configuration(), they may be used. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: Michael Buesch <[email protected]> Acked-by: Marcel Holtmann <[email protected]> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <[email protected]>
2010-08-03pcmcia: do not use io_req_t after call to pcmcia_request_io()Dominik Brodowski1-10/+8
After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] Acked-by: Marcel Holtmann <[email protected]> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <[email protected]>
2010-08-03pcmcia: use pcmica_{read,write}_config_byteDominik Brodowski1-66/+25
Use pcmcia_read_config_byte and pcmcia_write_config_byte instead of pcmcia_access_configuration_register. CC: [email protected] CC: [email protected] CC: [email protected] CC: Michael Buesch <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-07-30pcmcia: remove cs_types.hDominik Brodowski1-2/+1
Remove cs_types.h which is no longer needed: Most definitions aren't used at all, a few can be made away with, and two remaining definitions (typedefs, unfortunatley) may be moved to more specific places. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] Acked-by: Marcel Holtmann <[email protected]> (for drivers/bluetooth/) Acked-by: David S. Miller <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2010-07-20Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/vhost/net.c net/bridge/br_device.c Fix merge conflict in drivers/vhost/net.c with guidance from Stephen Rothwell. Revert the effects of net-2.6 commit 573201f36fd9c7c6d5218cdcd9948cee700b277d since net-next-2.6 has fixes that make bridge netpoll work properly thus we don't need it disabled. Signed-off-by: David S. Miller <[email protected]>
2010-07-19fix comment typos concerning "challenge"Uwe Kleine-König1-1/+1
Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2010-07-14hostap_pci: set dev->base_addr during probeJohn W. Linville1-0/+1
"hostap: Protect against initialization interrupt" (which reinstated "wireless: hostap, fix oops due to early probing interrupt") reintroduced Bug 16111. This is because hostap_pci wasn't setting dev->base_addr, which is now checked in prism2_interrupt. As a result, initialization was failing for PCI-based hostap devices. This corrects that oversight. Signed-off-by: John W. Linville <[email protected]>
2010-07-13Merge branch 'master' of ↵John W. Linville1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-07-12hostap: fixup strlen() mathDan Carpenter1-1/+1
In hostap_add_interface() we do: sprintf(dev->name, "%s%s", prefix, name); dev->name has IFNAMSIZ (16) characters. prefix is local->dev->name. name is "wds%d" strlen() returns the number of characters in the string not counting the NULL so if we have a string with 11 characters we get "12345678901wds%d" which is 16 characters and a NULL so we're past the end of the array. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-07-01Merge branch 'master' of ↵David S. Miller2-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/libertas/host.h
2010-06-18wireless:hostap_ap.c Fix warning: variable 'fc' set but not usedJustin P. Mattock1-2/+1
The below patch fixes a warning message when compiling with gcc 4.6.0 CC [M] drivers/net/wireless/hostap/hostap_ap.o drivers/net/wireless/hostap/hostap_ap.c: In function 'hostap_ap_tx_cb_assoc': drivers/net/wireless/hostap/hostap_ap.c:691:6: warning: variable 'fc' set but not used Signed-off-by: Justin P. Mattock <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-06-18wireless:hostap_main.c warning: variable 'iface' set but not usedJustin P. Mattock1-2/+0
The patch below fixes a warning message Im seeing with gcc 4.6.0 CC [M] drivers/net/wireless/hostap/hostap_main.o drivers/net/wireless/hostap/hostap_main.c: In function 'hostap_set_multicast_list_queue': drivers/net/wireless/hostap/hostap_main.c:744:27: warning: variable 'iface' set but not used Signed-off-by: Justin P. Mattock <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-06-17Merge branch 'master' of ↵David S. Miller3-3/+27
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-06-15hostap: Protect against initialization interruptTim Gardner3-3/+27
Use an irq spinlock to hold off the IRQ handler until enough early card init is complete such that the handler can run without faulting. Signed-off-by: Tim Gardner <[email protected]> Cc: [email protected] Signed-off-by: John W. Linville <[email protected]>
2010-06-11Merge branch 'master' of ↵David S. Miller1-9/+0
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-06-04Revert "wireless: hostap, fix oops due to early probing interrupt"John W. Linville1-9/+0
This reverts commit 15920d8afc87861672e16fa95ae2764b065d6dd3. This patch was discovered to cause some hostap devices to fail to initialized. https://bugzilla.kernel.org/show_bug.cgi?id=16111 Signed-off-by: John W. Linville <[email protected]>
2010-06-03drivers/net: use __packed annotationEric Dumazet3-30/+30
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds4-6/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1674 commits) qlcnic: adding co maintainer ixgbe: add support for active DA cables ixgbe: dcb, do not tag tc_prio_control frames ixgbe: fix ixgbe_tx_is_paused logic ixgbe: always enable vlan strip/insert when DCB is enabled ixgbe: remove some redundant code in setting FCoE FIP filter ixgbe: fix wrong offset to fc_frame_header in ixgbe_fcoe_ddp ixgbe: fix header len when unsplit packet overflows to data buffer ipv6: Never schedule DAD timer on dead address ipv6: Use POSTDAD state ipv6: Use state_lock to protect ifa state ipv6: Replace inet6_ifaddr->dead with state cxgb4: notify upper drivers if the device is already up when they load cxgb4: keep interrupts available when the ports are brought down cxgb4: fix initial addition of MAC address cnic: Return SPQ credit to bnx2x after ring setup and shutdown. cnic: Convert cnic_local_flags to atomic ops. can: Fix SJA1000 command register writes on SMP systems bridge: fix build for CONFIG_SYSFS disabled ARCNET: Limit com20020 PCI ID matches for SOHARD cards ... Fix up various conflicts with pcmcia tree drivers/net/ {pcmcia/3c589_cs.c, wireless/orinoco/orinoco_cs.c and wireless/orinoco/spectrum_cs.c} and feature removal (Documentation/feature-removal-schedule.txt). Also fix a non-content conflict due to pm_qos_requirement getting renamed in the PM tree (now pm_qos_request) in net/mac80211/scan.c
2010-05-17drivers/net: remove useless semicolonsJoe Perches2-2/+2
switch and while statements don't need semicolons at end of statement [ Fixup minor conflicts with recent wimax merge... -DaveM ] Signed-off-by: Joe Perches <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-17Merge branch 'master' of ↵John W. Linville2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-05-12drivers/net/wireless/hostap: Drop memory allocation castJulia Lawall2-4/+2
Drop cast on the result of kmalloc and similar functions. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; @@ - (T *) (\(kmalloc\|kzalloc\|kcalloc\|kmem_cache_alloc\|kmem_cache_zalloc\| kmem_cache_alloc_node\|kmalloc_node\|kzalloc_node\)(...)) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-05-10pcmcia: dev_node removal (write-only drivers)Dominik Brodowski1-7/+2
dev_node_t was only used to transport some minor/major numbers from the PCMCIA device drivers to deprecated userspace helpers. However, only a few drivers made use of it, and the userspace helpers are deprecated anyways. Therefore, get rid of dev_node_t . As a first step, remove any usage of dev_node_t from drivers which only wrote to this typedef/struct, but did not make use of it. CC: [email protected] CC: Harald Welte <[email protected]> CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] Signed-off-by: Dominik Brodowski <[email protected]>
2010-05-10pcmcia: re-work pcmcia_request_irq()Dominik Brodowski1-23/+6
Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] Signed-off-by: Dominik Brodowski <[email protected]>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo8-0/+9
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <[email protected]> Guess-its-ok-by: Christoph Lameter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Lee Schermerhorn <[email protected]>
2010-02-25Merge branch 'master' of ↵David S. Miller1-13/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.h drivers/net/wireless/rt2x00/rt2800pci.c
2010-02-19Introduce PCMCIA_DEVICE_PROD_ID3Pavel Roskin1-13/+4
...and use it in hostap_cs and orinoco_cs. Another PCMCIA device with Intersil Prism chipset has been reported: Socket 0: product info: "Gigabyte", "GN-WLM01_P25L_ADAPTER", "ISL37300P", "Eval-RevA" manfid: 0x02e0, 0x1011 function: 6 (network) As it's the case with some other Prism based devices, the third ID string contains a design name that should be sufficient to identify the card as having Intersil Prism chipset and thus compatible with both orinoco_cs and hostap_cs. Introduce PCMCIA_DEVICE_PROD_ID3 that matches the third ID string only. Use it in orinoco_cs and hostap_cs to match cards with the third ID string indicating Prism chipset. Remove corresponding entries that use PCMCIA_DEVICE_PROD_ID123. Reported-by: Ozzy <[email protected]> Signed-off-by: Pavel Roskin <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-01-07drivers/net/: use DEFINE_PCI_DEVICE_TABLE()Alexey Dobriyan2-2/+2
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: Alexey Dobriyan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2009-12-21wireless: hostap, fix oops due to early probing interruptColin Ian King1-0/+9
BugLink: https://bugs.launchpad.net/ubuntu/+bug/254837 Spurious shared interrupts or early probing interrupts can cause the hostap interrupt handler to oops before the driver has fully configured the IO base port addresses. In some cases the oops can be because the hardware shares an interrupt line, on other cases it is due to a race condition between probing for the hardware and configuring the IO base port. The latter occurs because the probing is required to determin the hardware port address which is only determined when the probe can interrupt the hardware (catch 22). This patch catches this pre-configured condition to avoid the oops. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Stefan Bader <[email protected]> Acked-by: Tim Gardner <[email protected]> Acked-by: Stefan Bader <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2009-12-05Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller1-40/+11
Conflicts: drivers/net/pcmcia/fmvj18x_cs.c drivers/net/pcmcia/nmclan_cs.c drivers/net/pcmcia/xirc2ps_cs.c drivers/net/wireless/ray_cs.c
2009-11-28pcmcia: rework the irq_req_t typedefDominik Brodowski1-4/+1
Most of the irq_req_t typedef'd struct can be re-worked quite easily: (1) IRQInfo2 was unused in any case, so drop it. (2) IRQInfo1 was used write-only, so drop it. (3) Instance (private data to be passed to the IRQ handler): Most PCMCIA drivers using pcmcia_request_irq() to actually register an IRQ handler set the "dev_id" to the same pointer as the "priv" pointer in struct pcmcia_device. Modify the two exceptions (ipwireless, ibmtr_cs) to also work this waym and set the IRQ handler's "dev_id" to p_dev->priv unconditionally. (4) Handler is to be of type irq_handler_t. (5) Handler != NULL already tells whether an IRQ handler is present. Therefore, we do not need the IRQ_HANDLER_PRESENT flag in irq_req_t.Attributes. CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: [email protected] CC: Jaroslav Kysela <[email protected]> CC: Jiri Kosina <[email protected]> CC: Karsten Keil <[email protected]> for the Bluetooth parts: Acked-by: Marcel Holtmann <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2009-11-28pcmcia: remove deprecated handle_to_dev() macroDominik Brodowski1-1/+1
Update remaining users and remove deprecated handle_to_dev() macro CC: Harald Welte <[email protected]> CC: [email protected] CC: [email protected] CC: [email protected] Signed-off-by: Dominik Brodowski <[email protected]>
2009-11-18Merge branch 'master' of ↵David S. Miller2-0/+2
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/sfc/sfe4001.c drivers/net/wireless/libertas/cmd.c drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/rtl8187se/Kconfig drivers/staging/rtl8192e/Kconfig
2009-11-09pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (wireless)Dominik Brodowski1-15/+8
Convert PCMCIA drivers to use the dynamic debug infrastructure, instead of requiring manual settings of PCMCIA_DEBUG. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: [email protected] CC: [email protected] Signed-off-by: Dominik Brodowski <[email protected]>
2009-11-08pcmcia: use pre-determined valuesDominik Brodowski1-20/+1
A few PCMCIA network drivers can make use of values provided by the pcmcia core, instead of tedious, independent CIS parsing. xirc32ps_cs.c: manf_id hostap_cs.c: multifunction count b43/pcmcia.c: ConfigBase address and "Present" smc91c92_cs.c: By default, mhz_setup() can use VERS_1 as it is stored in struct pcmcia_device. Only some cards require workarounds, such as reading out VERS_1 twice. CC: David S. Miller <[email protected]> CC: [email protected] CC: [email protected] Acked-by: John W. Linville <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
2009-10-30wireless: remove WLAN_80211 and WLAN_PRE80211 from KconfigJohn W. Linville1-1/+0
With the WLAN_PRE80211 drivers moved to drivers/staging, this distinction becomes unnecessary. Signed-off-by: John W. Linville <[email protected]>
2009-10-11headers: remove sched.h from interrupt.hAlexey Dobriyan2-0/+2
After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <[email protected]>
2009-10-07wext: refactorJohannes Berg1-0/+2
Refactor wext to * split out iwpriv handling * split out iwspy handling * split out procfs support * allow cfg80211 to have wireless extensions compat code w/o CONFIG_WIRELESS_EXT After this, drivers need to - select WIRELESS_EXT - for wext support - select WEXT_PRIV - for iwpriv support - select WEXT_SPY - for iwspy support except cfg80211 -- which gets new hooks in wext-core.c and can then get wext handlers without CONFIG_WIRELESS_EXT. Wireless extensions procfs support is auto-selected based on PROC_FS and anything that requires the wext core (i.e. WIRELESS_EXT or CFG80211_WEXT). Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2009-09-14hostap: Revert a toxic part of the conversion to net_device_opsMartin Decky1-1/+2
As the hostap driver was converted to use net_device_ops, a mistake was made in hostap_main.c (commit 5ae4efbcd2611562a8b93596be034e63495706a5). Originally, the tx_queue_len was set to 0 for every other interface than HOSTAP_INTERFACE_MASTER, but the new fragment of code sets tx_queue_len to 0 only for HOSTAP_INTERFACE_MASTER. The opposite of the previous behavior makes the driver to drop all packets in AP mode. Change the way 0 is assigned to tx_queue_len according to the original logic. Signed-off-by: Martin Decky <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2009-09-01wireless: convert drivers to netdev_tx_tStephen Hemminger2-7/+14
Mostly just simple conversions: * ray_cs had bogus return of NET_TX_LOCKED but driver was not using NETIF_F_LLTX * hostap and ipw2x00 had some code that returned value from a called function that also had to change to return netdev_tx_t Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2009-07-24hostap_cs: Enable shared interruptsLarry Finger1-1/+2
The hostap_cs driver is programmed for exclusive rather that shared interrupts. Signed-off-by: Larry Finger <[email protected]> Reported-and-Tested-by: Jack Schneider <[email protected]> Signed-off-by: John W. Linville <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.