aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless/ath/ath9k/channel.c
AgeCommit message (Collapse)AuthorFilesLines
2014-10-02ath9k: Pass context to ath9k_chanctx_wake_queues()Sujith Manoharan1-3/+3
Change the ath9k_chanctx_wake_queues() API so that we can pass the channel context that needs its queues to be stopped. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-10-02ath9k: Print RoC expirationSujith Manoharan1-0/+7
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-26ath9k: Cache BSS informationSujith Manoharan1-3/+3
Using the BSS information stored in mac80211 directly is racy in certain conditions. For example, in a MCC setup, if the scheduler is switching channels when a local deauth is issued, calculation of the opmode/bssid etc. is incorrect. To avoid this, store the bss params in the driver and use it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Check beaconing mode properlySujith Manoharan1-0/+3
In MCC mode, the TSF of a context needs to be adjusted only if it is GO/AP. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: Remove unnecessary tbtt assignmentSujith Manoharan1-3/+2
The next_tbtt variable in the scheduler is needed only for GO/AP mode operation and is always read from the NEXT_TBTT_TIMER in the HW. There is no need to store the timestamp for received beacons. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-15ath9k: fix radar parameters initializationLorenzo Bianconi1-2/+0
Move ath9k_hw_set_radar_params() in ath9k_hw_reset() in order to avoid AR_PHY_RADAR registers are overwritten after hw reset Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix beacon miss handlingSujith Manoharan1-12/+32
The NoA duration for a GO is half the beacon interval and a concurrent context like a STA can be active only for that duration, before switching back to the GO's operating channel. Currently, when multiple beacons are missed, the dwell time for the STA context is extended to improve the chances of receiving a beacon. But the NoA is not updated and this will cause problems since the GO is offline for a period that is longer than the advertised duration. Fix this by ensuring that the NoA is updated first before extending the time slot for the STA context. Also make sure that non-periodic NoA is used for a one-time, longer absence period. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix channel switch time durationSujith Manoharan1-1/+1
Since the NoA duration is the maximum time the GO interface can be offline, it needs to include the time take to switch channels in the HW. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Clear offchannel duration properlySujith Manoharan1-1/+4
Clearing the offchannel duration value in the scheduler unconditionally breaks NoA when multiple contexts are active and an offchannel request is deferred, for example, in a scan run. Fix this by clearing the duration only if there is no pending offchannel request. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Fix Notice of Absence issuesSujith Manoharan1-35/+70
* The index has to incremented only when advertising a new NoA schedule. * Switch to non-periodic NoA when starting a scan operation and multiple channel contexts are active. * Make sure that periodic NoA is advertised again when scan ends. Since the offchannel timer moves the offchannel state to IDLE after the GO operating channel becomes active, use a flag "force_noa_update" to update the NoA contents. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-11ath9k: Assign offchannel duration properlySujith Manoharan1-2/+7
In multi-channel mode, an offchannel request will be deferred if both contexts are active. The duration of the offchannel operation is calculated but is not stored in the scheduler state. Fix this. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix MCC scanningSujith Manoharan1-1/+3
Scanning is curently broken when two channel contexts are active. For example in a P2P-GO/STA setup, the offchannel timer allows HZ / 10 to elapse before initiating a switch to the next scan channel from the current operating channel, which in this case would be the P2P-GO context. But, the channel context timer might decide to switch to the STA context when an SWBA comes early and a beacon is sent out. Since pending offchannel requests are processed in EVENT_BEACON_PREPARE, this causes inconsistent scanning. Fix this by making sure that a context switch happens before processing the pending offchannel request. This also makes sure that active channel contexts will always have higher priority than offchannel operations and the scan sequence looks like this: p2p-go, sta, p2p-go, offchannel, p2p-go, sta, p2p-go, offchannel,..... The oper-channel is p2p-go, so the STA context has to switch to p2p-go again before switching offchannel. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix offchannel operationSujith Manoharan1-0/+4
When multiple channel contexts are active, an offchannel request will not be handled immediately, but will be queued to be handled later. But, currently, the channel definition is not copied to the local offchannel state. This breaks operation like scanning when MCC is active. Fix this by storing the offchannel parameters properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Add CTWindow supportSujith Manoharan1-0/+26
Since CTWindow can be used for improving discoverability, fill this field in the NoA Attribute properly. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix offchannel duration calculationSujith Manoharan1-4/+5
Currently, different units are used for handling sc->offchannel.duration. In scan mode, it contains jiffies and in RoC mode, milliseconds is used. This causes confusion since in ath_chanctx_switch(), TU_TO_USEC is used to determine the offchannel duration, resulting in incorrect values. Fix this by using jiffies in both modes. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-09-09ath9k: Fix NoA start time calculationSujith Manoharan1-2/+2
The start time field in the NoA attribute needs to be updated based on the TSF timer when an absence notification is sent by the P2P GO. When two channel contexts are active, continuous, cyclic NoA is announced by setting the count value to 255, but the start time is updated only once, for one beacon and the same value is sent in all subsequent beacons, even though the timestamp keeps moving. Fix this by removing the check for 'periodic_noa_duration' and assign the interface's start_time/duration values directly when there is more than one active context. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix channel context timerSujith Manoharan1-1/+1
Setup the channel context correctly. Not doing this was causing beacon loss in a P2P-GO/STA concurrent setup. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add more debug statements for channel contextSujith Manoharan1-12/+78
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix channel context creationSujith Manoharan1-1/+21
If a new context is being added in addition to the current one, then send the ASSIGN event to abort a running scan since the addition of a context is usually followed by VIF assignment and further operations. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Print the event/state in ath_chanctx_eventSujith Manoharan1-2/+35
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add new chanctx eventsSujith Manoharan1-0/+4
This will be useful in handling addition/change of new channel contexts. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Move ath9k_beacon_add_noa to channel.cSujith Manoharan1-0/+49
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Remove redundant ifdefSujith Manoharan1-2/+0
This was introduced in an earlier patch to handle a compilation warning, but since the channel context code has been mostly isolated, this is not required now. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Use ath_chanctx_check_active properlySujith Manoharan1-45/+45
ath_chanctx_check_active() is required only when channel contexts are used. Make sure that it is not called in normal usage. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add ath9k_offchannel_initSujith Manoharan1-8/+25
This patch adds a routine to setup the offchannel instance in ath_softc. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add ath9k_chanctx_wake_queuesSujith Manoharan1-0/+26
Introduce a function that handles queues in channel context mode. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add wrappers for beacon eventsSujith Manoharan1-0/+14
Using these wrappers allows us to move the 'sched' variable in ath_softc inside CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Fix channel context eventsSujith Manoharan1-20/+24
Check if channel context usage is enabled before calling ath_chanctx_event() from various parts of the driver. Also, make sure that ath_chanctx_event() is compiled only when CONFIG_ATH9K_CHANNEL_CONTEXT is enabled. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_switch staticSujith Manoharan1-37/+37
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_get_oper_chan staticSujith Manoharan1-17/+18
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_offchan_switch staticSujith Manoharan1-13/+13
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Conditionally compile more functionsSujith Manoharan1-19/+19
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude: ath_scan_complete() ath_roc_complete() ath_offchannel_next() ath_scan_next_channel() ath_scan_channel_duration() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Exclude more functionsSujith Manoharan1-60/+60
Use CONFIG_ATH9K_CHANNEL_CONTEXT to exclude more functions: ath_offchannel_channel_change() ath_scan_channel_start() ath_scan_send_probe() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Conditionally compile a few functionsSujith Manoharan1-146/+146
Exclude these functions when CONFIG_ATH9K_CHANNEL_CONTEXT is not enabled: ath_chanctx_send_vif_ps_frame() ath_chanctx_send_ps_frame() ath_chanctx_defer_switch() ath_chanctx_set_next() Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Cleanup mgd_prepare_tx callbackSujith Manoharan1-31/+1
Rename the callback from ath9k_chanctx_force_active() to ath9k_mgd_prepare_tx(). Also, move it to main.c and group it with the other callbacks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Make ath_chanctx_work staticSujith Manoharan1-9/+9
Also compile it conditionally based on CONFIG_ATH9K_CHANNEL_CONTEXT. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a routine to tear down channel contextsSujith Manoharan1-0/+5
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add a routine for initializing channel contextsSujith Manoharan1-9/+19
Setup the offchannel/sched timers and the chanctx work inside the new function. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Isolate ath9k_use_chanctx module parameterSujith Manoharan1-0/+5
This patch ensures that the module parameter "use_chanctx" is visible only when CONFIG_ATH9K_CHANNEL_CONTEXT is selected. Also register the channel context callbacks with mac80211 only when it is explicitly enabled and compile them out of the driver when CONFIG_ATH9K_CHANNEL_CONTEXT is not selected. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Isolate P2P powersave routinesSujith Manoharan1-10/+68
Use CONFIG_ATH9K_CHANNEL_CONTEXT to conditionally compile P2P-PS code. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Move P2P functions to channel.cSujith Manoharan1-0/+86
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Add debug informationSujith Manoharan1-1/+60
Add a few statements to debug channel context operation. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-08-28ath9k: Move channel operations to channel.cSujith Manoharan1-0/+202
This reduces clutter in main.c Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add recovery mechanism for hw TSF timerFelix Fietkau1-7/+25
Configure the TSF based hardware timer for a channel switch. Also set up backup software timer, in case the gen timer fails. This could be caused by a hardware reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Update channel switch timerFelix Fietkau1-0/+11
TSF time might have been updated by the incoming beacon, need update the channel switch timer to reflect the change. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Handle beacon miss on multi channel contextFelix Fietkau1-4/+26
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add periodic NoA supportFelix Fietkau1-3/+21
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Add multi-channel scheduling supportFelix Fietkau1-4/+91
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Implement mgd_prepare_txFelix Fietkau1-8/+42
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19ath9k: Adjust AP beacon tsf based on station contextFelix Fietkau1-0/+48
In multi channel context (AP + STA case), adjust the TSF time of the AP chanctx to keep its beacons at half beacon interval offset relative to the STA chanctx. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Powered by cgit, Gruvboxed by Blaster4385.