aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/usb
AgeCommit message (Collapse)AuthorFilesLines
2018-06-26r8152: napi hangup fix after disconnectJiri Slaby1-1/+2
When unplugging an r8152 adapter while the interface is UP, the NIC becomes unusable. usb->disconnect (aka rtl8152_disconnect) deletes napi. Then, rtl8152_disconnect calls unregister_netdev and that invokes netdev->ndo_stop (aka rtl8152_close). rtl8152_close tries to napi_disable, but the napi is already deleted by disconnect above. So the first while loop in napi_disable never finishes. This results in complete deadlock of the network layer as there is rtnl_mutex held by unregister_netdev. So avoid the call to napi_disable in rtl8152_close when the device is already gone. The other calls to usb_kill_urb, cancel_delayed_work_sync, netif_stop_queue etc. seem to be fine. The urb and netdev is not destroyed yet. Signed-off-by: Jiri Slaby <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2018-06-26Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2018-06-24qmi_wwan: add support for the Dell Wireless 5821e moduleAleksander Morgado1-0/+1
This module exposes two USB configurations: a QMI+AT capable setup on USB config #1 and a MBIM capable setup on USB config #2. By default the kernel will choose the MBIM capable configuration as long as the cdc_mbim driver is available. This patch adds support for the QMI port in the secondary configuration. Signed-off-by: Aleksander Morgado <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-23net: drivers/net: Convert random_ether_addr to eth_random_addrJoe Perches1-1/+1
random_ether_addr is a #define for eth_random_addr which is generally preferred in kernel code by ~3:1 Convert the uses of random_ether_addr to enable removing the #define Miscellanea: o Convert &vfmac[0] to equivalent vfmac and avoid unnecessary line wrap Signed-off-by: Joe Perches <[email protected]> Acked-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-22net: usb: rtl8150: use irqsave() in USB's complete callbackSebastian Andrzej Siewior1-2/+3
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: Petko Manolov <[email protected]> Cc: "David S. Miller" <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-22net: usb: r8152: use irqsave() in USB's complete callbackSebastian Andrzej Siewior1-4/+6
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: "David S. Miller" <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-22net: usb: kaweth: use irqsave() in USB's complete callbackSebastian Andrzej Siewior1-4/+4
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: "David S. Miller" <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-22net: usb: hso: use irqsave() in USB's complete callbackSebastian Andrzej Siewior1-14/+21
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: "David S. Miller" <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-22net: usb: cdc-phonet: use irqsave() in USB's complete callbackSebastian Andrzej Siewior1-2/+3
The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: "David S. Miller" <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-20net/usb/drivers: Remove useless hrtimer_active checkDaniel Lezcano1-2/+1
The code does: if (hrtimer_active(&t)) hrtimer_cancel(&t); However, hrtimer_cancel() checks if the timer is active, so the test above is pointless. Signed-off-by: Daniel Lezcano <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook3-8/+8
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-06-08cdc_ncm: avoid padding beyond end of skbBjørn Mork1-2/+2
Commit 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") added logic to reserve space for the NDP at the end of the NTB/skb. This reservation did not take the final alignment of the NDP into account, causing us to reserve too little space. Additionally the padding prior to NDP addition did not ensure there was enough space for the NDP. The NTB/skb with the NDP appended would then exceed the configured max size. This caused the final padding of the NTB to use a negative count, padding to almost INT_MAX, and resulting in: [60103.825970] BUG: unable to handle kernel paging request at ffff9641f2004000 [60103.825998] IP: __memset+0x24/0x30 [60103.826001] PGD a6a06067 P4D a6a06067 PUD 4f65a063 PMD 72003063 PTE 0 [60103.826013] Oops: 0002 [#1] SMP NOPTI [60103.826018] Modules linked in: (removed( [60103.826158] CPU: 0 PID: 5990 Comm: Chrome_DevTools Tainted: G O 4.14.0-3-amd64 #1 Debian 4.14.17-1 [60103.826162] Hardware name: LENOVO 20081 BIOS 41CN28WW(V2.04) 05/03/2012 [60103.826166] task: ffff964193484fc0 task.stack: ffffb2890137c000 [60103.826171] RIP: 0010:__memset+0x24/0x30 [60103.826174] RSP: 0000:ffff964316c03b68 EFLAGS: 00010216 [60103.826178] RAX: 0000000000000000 RBX: 00000000fffffffd RCX: 000000001ffa5000 [60103.826181] RDX: 0000000000000005 RSI: 0000000000000000 RDI: ffff9641f2003ffc [60103.826184] RBP: ffff964192f6c800 R08: 00000000304d434e R09: ffff9641f1d2c004 [60103.826187] R10: 0000000000000002 R11: 00000000000005ae R12: ffff9642e6957a80 [60103.826190] R13: ffff964282ff2ee8 R14: 000000000000000d R15: ffff9642e4843900 [60103.826194] FS: 00007f395aaf6700(0000) GS:ffff964316c00000(0000) knlGS:0000000000000000 [60103.826197] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [60103.826200] CR2: ffff9641f2004000 CR3: 0000000013b0c000 CR4: 00000000000006f0 [60103.826204] Call Trace: [60103.826212] <IRQ> [60103.826225] cdc_ncm_fill_tx_frame+0x5e3/0x740 [cdc_ncm] [60103.826236] cdc_ncm_tx_fixup+0x57/0x70 [cdc_ncm] [60103.826246] usbnet_start_xmit+0x5d/0x710 [usbnet] [60103.826254] ? netif_skb_features+0x119/0x250 [60103.826259] dev_hard_start_xmit+0xa1/0x200 [60103.826267] sch_direct_xmit+0xf2/0x1b0 [60103.826273] __dev_queue_xmit+0x5e3/0x7c0 [60103.826280] ? ip_finish_output2+0x263/0x3c0 [60103.826284] ip_finish_output2+0x263/0x3c0 [60103.826289] ? ip_output+0x6c/0xe0 [60103.826293] ip_output+0x6c/0xe0 [60103.826298] ? ip_forward_options+0x1a0/0x1a0 [60103.826303] tcp_transmit_skb+0x516/0x9b0 [60103.826309] tcp_write_xmit+0x1aa/0xee0 [60103.826313] ? sch_direct_xmit+0x71/0x1b0 [60103.826318] tcp_tasklet_func+0x177/0x180 [60103.826325] tasklet_action+0x5f/0x110 [60103.826332] __do_softirq+0xde/0x2b3 [60103.826337] irq_exit+0xae/0xb0 [60103.826342] do_IRQ+0x81/0xd0 [60103.826347] common_interrupt+0x98/0x98 [60103.826351] </IRQ> [60103.826355] RIP: 0033:0x7f397bdf2282 [60103.826358] RSP: 002b:00007f395aaf57d8 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff6e [60103.826362] RAX: 0000000000000000 RBX: 00002f07bc6d0900 RCX: 00007f39752d7fe7 [60103.826365] RDX: 0000000000000022 RSI: 0000000000000147 RDI: 00002f07baea02c0 [60103.826368] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 [60103.826371] R10: 00000000ffffffff R11: 0000000000000000 R12: 00002f07baea02c0 [60103.826373] R13: 00002f07bba227a0 R14: 00002f07bc6d090c R15: 0000000000000000 [60103.826377] Code: 90 90 90 90 90 90 90 0f 1f 44 00 00 49 89 f9 48 89 d1 83 e2 07 48 c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 <f3> 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 [60103.826442] RIP: __memset+0x24/0x30 RSP: ffff964316c03b68 [60103.826444] CR2: ffff9641f2004000 Commit e1069bbfcf3b ("net: cdc_ncm: Reduce memory use when kernel memory low") made this bug much more likely to trigger by reducing the NTB size under memory pressure. Link: https://bugs.debian.org/893393 Reported-by: Горбешко Богдан <[email protected]> Reported-and-tested-by: Dennis Wassenberg <[email protected]> Cc: Enrico Mioso <[email protected]> Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-1/+2
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <[email protected]>
2018-06-01net: usb: cdc_mbim: add flag FLAG_SEND_ZLPDaniele Palmas1-1/+1
Testing Telit LM940 with ICMP packets > 14552 bytes revealed that the modem needs FLAG_SEND_ZLP to properly work, otherwise the cdc mbim data interface won't be anymore responsive. Signed-off-by: Daniele Palmas <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-29net: qmi_wwan: Add Netgear Aircard 779SJosh Hill1-0/+1
Add support for Netgear Aircard 779S Signed-off-by: Josh Hill <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-28qmi_wwan: apply SET_DTR quirk to the SIMCOM shared device IDBjørn Mork1-1/+1
SIMCOM are reusing a single device ID for many (all of their?) different modems, based on different chipsets and firmwares. Newer Qualcomm chipset generations require setting DTR to wake the QMI function. The SIM7600E modem is using such a chipset, making it fail to work with this driver despite the device ID match. Fix by unconditionally enabling the SET_DTR quirk for all SIMCOM modems using this specific device ID. This is similar to what we already have done for another case of device IDs recycled over multiple chipset generations: 14cf4a771b30 ("drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201") Initial testing on an older SIM7100 modem shows no immediate side effects. Reported-by: Sebastian Sjoholm <[email protected]> Cc: Reinhard Speyerer <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-16drivers: net: Remove device_node checks with of_mdiobus_register()Florian Fainelli1-5/+2
A number of drivers have the following pattern: if (np) of_mdiobus_register() else mdiobus_register() which the implementation of of_mdiobus_register() now takes care of. Remove that pattern in drivers that strictly adhere to it. Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Grygorii Strashko <[email protected]> Reviewed-by: Fugang Duan <[email protected]> Reviewed-by: Antoine Tenart <[email protected]> Reviewed-by: Jose Abreu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+13
Overlapping changes in selftests Makefile. Signed-off-by: David S. Miller <[email protected]>
2018-05-03qmi_wwan: do not steal interfaces from class driversBjørn Mork1-0/+12
The USB_DEVICE_INTERFACE_NUMBER matching macro assumes that the { vendorid, productid, interfacenumber } set uniquely identifies one specific function. This has proven to fail for some configurable devices. One example is the Quectel EM06/EP06 where the same interface number can be either QMI or MBIM, without the device ID changing either. Fix by requiring the vendor-specific class for interface number based matching. Functions of other classes can and should use class based matching instead. Fixes: 03304bcb5ec4 ("net: qmi_wwan: use fixed interface number matching") Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-29lan78xx: Modify error messagesRaghuram Chary J1-2/+2
Modify the error messages when phy registration fails. Signed-off-by: Raghuram Chary J <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-29lan78xx: Remove DRIVER_VERSION for lan78xx driverRaghuram Chary J1-2/+0
Remove driver version info from the lan78xx driver. Signed-off-by: Raghuram Chary J <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-29lan78xx: Lan7801 Support for Fixed PHYRaghuram Chary J2-28/+77
Adding Fixed PHY support to the lan78xx driver. Signed-off-by: Raghuram Chary J <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-27NET: usb: qmi_wwan: add support for ublox R410M PID 0x90b2SZ Lin (林上智)1-0/+1
This patch adds support for PID 0x90b2 of ublox R410M. qmicli -d /dev/cdc-wdm0 --dms-get-manufacturer [/dev/cdc-wdm0] Device manufacturer retrieved: Manufacturer: 'u-blox' qmicli -d /dev/cdc-wdm0 --dms-get-model [/dev/cdc-wdm0] Device model retrieved: Model: 'SARA-R410M-02B' Signed-off-by: SZ Lin (林上智) <[email protected]> Cc: stable <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Conflicts were simple overlapping changes in microchip driver. Signed-off-by: David S. Miller <[email protected]>
2018-04-20lan78xx: Add support to dump lan78xx registersRaghuram Chary J1-0/+54
In order to dump lan78xx family registers using ethtool, add support at lan78xx driver level. Signed-off-by: Raghuram Chary J <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-20lan78xx: Read LED states from Device TreePhil Elwell1-1/+31
Add support for DT property "microchip,led-modes", a vector of zero to four cells (u32s) in the range 0-15, each of which sets the mode for one of the LEDs. Some possible values are: 0=link/activity 1=link1000/activity 2=link100/activity 3=link10/activity 4=link100/1000/activity 5=link10/1000/activity 6=link10/100/activity 14=off 15=on These values are given symbolic constants in a dt-bindings header. Also use the presence of the DT property to indicate that the LEDs should be enabled - necessary in the event that no valid OTP or EEPROM is available. Signed-off-by: Phil Elwell <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-20lan78xx: Read MAC address from DT if presentPhil Elwell1-22/+20
There is a standard mechanism for locating and using a MAC address from the Device Tree. Use this facility in the lan78xx driver to support applications without programmed EEPROM or OTP. At the same time, regularise the handling of the different address sources. Signed-off-by: Phil Elwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19net: qmi_wwan: add Wistron Neweb D19Q1Pawel Dembicki1-0/+1
This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Pawel Dembicki <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-11lan78xx: Don't reset the interface on openPhil Elwell1-4/+0
Commit 92571a1aae40 ("lan78xx: Connect phy early") moves the PHY initialisation into lan78xx_probe, but lan78xx_open subsequently calls lan78xx_reset. As well as forcing a second round of link negotiation, this reset frequently prevents the phy interrupt from being generated (even though the link is up), rendering the interface unusable. Fix this issue by removing the lan78xx_reset call from lan78xx_open. Fixes: 92571a1aae40 ("lan78xx: Connect phy early") Signed-off-by: Phil Elwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-11cdc_ether: flag the Cinterion AHS8 modem by gemalto as WWANBassem Boubaker1-0/+6
The Cinterion AHS8 is a 3G device with one embedded WWAN interface using cdc_ether as a driver. The modem is controlled via AT commands through the exposed TTYs. AT+CGDCONT write command can be used to activate or deactivate a WWAN connection for a PDP context defined with the same command. UE supports one WWAN adapter. Signed-off-by: Bassem Boubaker <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-11lan78xx: Avoid spurious kevent 4 "error"Phil Elwell1-1/+1
lan78xx_defer_event generates an error message whenever the work item is already scheduled. lan78xx_open defers three events - EVENT_STAT_UPDATE, EVENT_DEV_OPEN and EVENT_LINK_RESET. Being aware of the likelihood (or certainty) of an error message, the DEV_OPEN event is added to the set of pending events directly, relying on the subsequent deferral of the EVENT_LINK_RESET call to schedule the work. Take the same precaution with EVENT_STAT_UPDATE to avoid a totally unnecessary error message. Signed-off-by: Phil Elwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-11lan78xx: Correctly indicate invalid OTPPhil Elwell1-1/+2
lan78xx_read_otp tries to return -EINVAL in the event of invalid OTP content, but the value gets overwritten before it is returned and the read goes ahead anyway. Make the read conditional as it should be and preserve the error code. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Phil Elwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-04lan78xx: Connect phy earlyAlexander Graf1-16/+18
When using wicked with a lan78xx device attached to the system, we end up with ethtool commands issued on the device before an ifup got issued. That lead to the following crash: Unable to handle kernel NULL pointer dereference at virtual address 0000039c pgd = ffff800035b30000 [0000039c] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: [...] Supported: Yes CPU: 3 PID: 638 Comm: wickedd Tainted: G E 4.12.14-0-default #1 Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018 task: ffff800035e74180 task.stack: ffff800036718000 PC is at phy_ethtool_ksettings_get+0x20/0x98 LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx] pc : [<ffff0000086f7f30>] lr : [<ffff000000dcca84>] pstate: 20000005 sp : ffff80003671bb20 x29: ffff80003671bb20 x28: ffff800035e74180 x27: ffff000008912000 x26: 000000000000001d x25: 0000000000000124 x24: ffff000008f74d00 x23: 0000004000114809 x22: 0000000000000000 x21: ffff80003671bbd0 x20: 0000000000000000 x19: ffff80003671bbd0 x18: 000000000000040d x17: 0000000000000001 x16: 0000000000000000 x15: 0000000000000000 x14: ffffffffffffffff x13: 0000000000000000 x12: 0000000000000020 x11: 0101010101010101 x10: fefefefefefefeff x9 : 7f7f7f7f7f7f7f7f x8 : fefefeff31677364 x7 : 0000000080808080 x6 : ffff80003671bc9c x5 : ffff80003671b9f8 x4 : ffff80002c296190 x3 : 0000000000000000 x2 : 0000000000000000 x1 : ffff80003671bbd0 x0 : ffff80003671bc00 Process wickedd (pid: 638, stack limit = 0xffff800036718000) Call trace: Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20) b9e0: ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000 ba00: ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080 ba20: fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101 ba40: 0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000 ba60: 0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0 ba80: 0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809 baa0: ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000 bac0: ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20 bae0: ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900 bb00: 0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30 [<ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98 [<ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx] [<ffff0000087cbc40>] ethtool_get_settings+0x68/0x210 [<ffff0000087cc0d4>] dev_ethtool+0x214/0x2180 [<ffff0000087e5008>] dev_ioctl+0x400/0x630 [<ffff00000879dd00>] sock_do_ioctl+0x70/0x88 [<ffff00000879f5f8>] sock_ioctl+0x208/0x368 [<ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848 [<ffff0000082ce634>] SyS_ioctl+0x8c/0xa8 Exception stack(0xffff80003671bec0 to 0xffff80003671c000) bec0: 0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465 bee0: 0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465 bf00: 000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f bf20: 0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68 bf40: 0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0 bf60: 0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000 bf80: 0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00 bfa0: 0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0 bfc0: 0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 The culprit is quite simple: The driver tries to access the phy left and right, but only actually has a working reference to it when the device is up. The fix thus is quite simple too: Get a reference to the phy on probe already and keep it even when the device is going down. With this patch applied, I can successfully run wicked on my system and bring the interface up and down as many times as I want, without getting NULL pointer dereferences in between. Signed-off-by: Alexander Graf <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+36
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <[email protected]>
2018-04-01Revert "net: usb: asix88179_178a: de-duplicate code"David S. Miller1-31/+86
This reverts commit cf29bded91f9153208c4c2145d602cd82430ad1a. It causes regressions. Signed-off-by: David S. Miller <[email protected]>
2018-03-29lan78xx: Crash in lan78xx_writ_reg (Workqueue: events ↵Raghuram Chary J1-2/+21
lan78xx_deferred_multicast_write) Description: Crash was reported with syzkaller pointing to lan78xx_write_reg routine. Root-cause: Proper cleanup of workqueues and init/setup routines was not happening in failure conditions. Fix: Handled the error conditions by cleaning up the queues and init/setup routines. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Reported-by: Andrey Konovalov <[email protected]> Signed-off-by: Raghuram Chary J <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27net-usb: add qmi_wwan if on lte modem wistron neweb d18q1Giuseppe Lippolis1-0/+3
This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Giuseppe Lippolis <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-26net/usb/qmi_wwan.c: Add USB id for lt4120 modemTorsten Hilbrich1-0/+1
This is needed to support the modem found in HP EliteBook 820 G3. Signed-off-by: Torsten Hilbrich <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-26net: qmi_wwan: add BroadMobi BM806U 2020:2033Pawel Dembicki1-0/+1
BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. The USB id is added to qmi_wwan.c to allow QMI communication with the BM806U. Tested on 4.14 kernel and OpenWRT. Signed-off-by: Pawel Dembicki <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-26drivers/net: Use octal not symbolic permissionsJoe Perches2-10/+10
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <[email protected]> Reviewed-by: Wei Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-25lan78xx: Set ASD in MAC_CR when EEE is enabled.Raghuram Chary J1-0/+10
Description: EEE does not work with lan7800 when AutoSpeed is not set. (This can happen when EEPROM is not populated or configured incorrectly) Root-Cause: When EEE is enabled, the mac config register ASD is not set i.e. in default state, causing EEE fail. Fix: Set the register when eeprom is not present. Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by: Raghuram Chary J <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+6
Fun set of conflict resolutions here... For the mac80211 stuff, these were fortunately just parallel adds. Trivially resolved. In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the function phy_disable_interrupts() earlier in the file, whilst in 'net-next' the phy_error() call from this function was removed. In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the 'rt_table_id' member of rtable collided with a bug fix in 'net' that added a new struct member "rt_mtu_locked" which needs to be copied over here. The mlxsw driver conflict consisted of net-next separating the span code and definitions into separate files, whilst a 'net' bug fix made some changes to that moved code. The mlx5 infiniband conflict resolution was quite non-trivial, the RDMA tree's merge commit was used as a guide here, and here are their notes: ==================== Due to bug fixes found by the syzkaller bot and taken into the for-rc branch after development for the 4.17 merge window had already started being taken into the for-next branch, there were fairly non-trivial merge issues that would need to be resolved between the for-rc branch and the for-next branch. This merge resolves those conflicts and provides a unified base upon which ongoing development for 4.17 can be based. Conflicts: drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524 (IB/mlx5: Fix cleanup order on unload) added to for-rc and commit b5ca15ad7e61 (IB/mlx5: Add proper representors support) add as part of the devel cycle both needed to modify the init/de-init functions used by mlx5. To support the new representors, the new functions added by the cleanup patch needed to be made non-static, and the init/de-init list added by the representors patch needed to be modified to match the init/de-init list changes made by the cleanup patch. Updates: drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function prototypes added by representors patch to reflect new function names as changed by cleanup patch drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init stage list to match new order from cleanup patch ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-15net: drivers/net: Remove unnecessary skb_copy_expand OOM messagesJoe Perches1-5/+1
skb_copy_expand without __GFP_NOWARN already does a dump_stack on OOM so these messages are redundant. Signed-off-by: Joe Perches <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-08net: usb: asix88179_178a: de-duplicate codeAlexander Kurz1-86/+31
Remove the duplicated code for asix88179_178a bind and reset methods. Signed-off-by: Alexander Kurz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-08net: usb: asix88179_178a: set permanent address once onlyAlexander Kurz1-1/+0
The permanent address of asix88179_178a devices is read at probe time and should not be overwritten later. Otherwise it may be overwritten unintentionally with a configured address. Signed-off-by: Alexander Kurz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-07net: cdc_eem: clean up bind error pathJohan Hovold1-4/+1
Drop bogus call to usb_driver_release_interface() from an error path in the usbnet bind() callback, which is called during interface probe. At this point the interface is not bound and usb_driver_release_interface() returns early. Also remove the bogus call to clear the interface data, which is owned by the usbnet driver and would not even have been set by the time bind() is called. Signed-off-by: Johan Hovold <[email protected]> Acked-by: Oliver Neukum <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-07net: kalmia: clean up bind error pathJohan Hovold1-5/+1
Drop bogus call to usb_driver_release_interface() from an error path in the usbnet bind() callback, which is called during interface probe. At this point the interface is not bound and usb_driver_release_interface() returns early. Also remove the bogus call to clear the interface data, which is owned by the usbnet driver and would not even have been set by the time bind() is called. Signed-off-by: Johan Hovold <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-07net: usbnet: fix potential deadlock on 32bit hostsEric Dumazet1-4/+6
Marek reported a LOCKDEP issue occurring on 32bit host, that we tracked down to the fact that usbnet could either run from soft or hard irqs. This patch adds u64_stats_update_begin_irqsave() and u64_stats_update_end_irqrestore() helpers to solve this case. [ 17.768040] ================================ [ 17.772239] WARNING: inconsistent lock state [ 17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted [ 17.783329] -------------------------------- [ 17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 17.798751] (&syncp->seq#5){?.-.}, at: [<9b22e5f0>] asix_rx_fixup_internal+0x188/0x288 [ 17.806790] {IN-HARDIRQ-W} state was registered at: [ 17.811677] tx_complete+0x100/0x208 [ 17.815319] __usb_hcd_giveback_urb+0x60/0xf0 [ 17.819770] xhci_giveback_urb_in_irq+0xa8/0x240 [ 17.824469] xhci_td_cleanup+0xf4/0x16c [ 17.828367] xhci_irq+0xe74/0x2240 [ 17.831827] usb_hcd_irq+0x24/0x38 [ 17.835343] __handle_irq_event_percpu+0x98/0x510 [ 17.840111] handle_irq_event_percpu+0x1c/0x58 [ 17.844623] handle_irq_event+0x38/0x5c [ 17.848519] handle_fasteoi_irq+0xa4/0x138 [ 17.852681] generic_handle_irq+0x18/0x28 [ 17.856760] __handle_domain_irq+0x6c/0xe4 [ 17.860941] gic_handle_irq+0x54/0xa0 [ 17.864666] __irq_svc+0x70/0xb0 [ 17.867964] arch_cpu_idle+0x20/0x3c [ 17.871578] arch_cpu_idle+0x20/0x3c [ 17.875190] do_idle+0x144/0x218 [ 17.878468] cpu_startup_entry+0x18/0x1c [ 17.882454] start_kernel+0x394/0x400 [ 17.886177] irq event stamp: 161912 [ 17.889616] hardirqs last enabled at (161912): [<7bedfacf>] __netdev_alloc_skb+0xcc/0x140 [ 17.897893] hardirqs last disabled at (161911): [<d58261d0>] __netdev_alloc_skb+0x94/0x140 [ 17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout [ 17.906116] softirqs last enabled at (161904): [<387102ff>] irq_enter+0x78/0x80 [ 17.906123] softirqs last disabled at (161905): [<cf4c628e>] irq_exit+0x134/0x158 [ 17.925722]. [ 17.925722] other info that might help us debug this: [ 17.933435] Possible unsafe locking scenario: [ 17.933435]. [ 17.940331] CPU0 [ 17.942488] ---- [ 17.944894] lock(&syncp->seq#5); [ 17.948274] <Interrupt> [ 17.950847] lock(&syncp->seq#5); [ 17.954386]. [ 17.954386] *** DEADLOCK *** [ 17.954386]. [ 17.962422] no locks held by swapper/0/0. Fixes: c8b5d129ee29 ("net: usbnet: support 64bit stats") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Marek Szyprowski <[email protected]> Cc: Greg Ungerer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-1/+7
All of the conflicts were cases of overlapping changes. In net/core/devlink.c, we have to make care that the resouce size_params have become a struct member rather than a pointer to such an object. Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.