aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/usb/usbnet.c
AgeCommit message (Collapse)AuthorFilesLines
2020-10-13net: usbnet: use new function dev_fetch_sw_netstatsHeiner Kallweit1-23/+1
Simplify the code by using new function dev_fetch_sw_netstats(). Signed-off-by: Heiner Kallweit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-10net: usbnet: remove driver versionHeiner Kallweit1-4/+0
Obviously this driver version doesn't make sense. Go with the default and let ethtool display the kernel version. Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-03usbnet: Use fallthrough pseudo-keywordGustavo A. R. Silva1-1/+1
Replace // FALLTHROUGH comment with the new pseudo-keyword macro fallthrough[1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-3/+3
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]>
2020-07-17net: usbnet: export usbnet_set_rx_mode()Bjørn Mork1-1/+2
This function can be reused by other usbnet minidrivers. Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <[email protected]>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-1/+1
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Heiner Kallweit <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Acked-by: Shannon Nelson <[email protected]> Reviewed-by: Martin Habets <[email protected]> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <[email protected]>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya1-1/+1
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Kees Cook <[email protected]> Signed-off-by: Kees Cook <[email protected]> Acked-by: David Miller <[email protected]> # for net
2019-11-26net: usbnet: Fix -Wcast-function-typePhong Tran1-1/+8
correct usage prototype of callback in tasklet_init(). Report by https://github.com/KSPP/linux/issues/20 Signed-off-by: Phong Tran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-21usbnet: ignore endpoints with invalid wMaxPacketSizeBjørn Mork1-0/+5
Endpoints with zero wMaxPacketSize are not usable for transferring data. Ignore such endpoints when looking for valid in, out and status pipes, to make the drivers more robust against invalid and meaningless descriptors. The wMaxPacketSize of these endpoints are used for memory allocations and as divisors in many usbnet minidrivers. Avoiding zero is therefore critical. Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-09-19usbnet: sanity checking of packet sizes and device mtuOliver Neukum1-0/+3
After a reset packet sizes and device mtu can change and need to be reevaluated to calculate queue sizes. Malicious devices can set this to zero and we divide by it. Introduce sanity checking. Reported-and-tested-by: [email protected] Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-07-30net: Use skb_frag_off accessorsJonathan Lemon1-1/+1
Use accessor functions for skb fragment's page_offset instead of direct references, in preparation for bvec conversion. Signed-off-by: Jonathan Lemon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)1-2/+2
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+6
Pull networking fixes from David Miller: 1) Clear up some recent tipc regressions because of registration ordering. Fix from Junwei Hu. 2) tipc's TLV_SET() can read past the end of the supplied buffer during the copy. From Chris Packham. 3) ptp example program doesn't match the kernel, from Richard Cochran. 4) Outgoing message type fix in qrtr, from Bjorn Andersson. 5) Flow control regression in stmmac, from Tan Tee Min. 6) Fix inband autonegotiation in phylink, from Russell King. 7) Fix sk_bound_dev_if handling in rawv6_bind(), from Mike Manning. 8) Fix usbnet crash after disconnect, from Kloetzke Jan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (21 commits) usbnet: fix kernel crash after disconnect selftests: fib_rule_tests: use pre-defined DEV_ADDR net-next: net: Fix typos in ip-sysctl.txt ipv6: Consider sk_bound_dev_if when binding a raw socket to an address net: phylink: ensure inband AN works correctly usbnet: ipheth: fix racing condition net: stmmac: dma channel control register need to be init first net: stmmac: fix ethtool flow control not able to get/set net: qrtr: Fix message type of outgoing packets networking: : fix typos in code comments ptp: Fix example program to match kernel. fddi: fix typos in code comments selftests: fib_rule_tests: enable forwarding before ipv4 from/iif test selftests: fib_rule_tests: fix local IPv4 address typo tipc: Avoid copying bytes beyond the supplied data 2/2] net: xilinx_emaclite: use readx_poll_timeout() in mdio wait function 1/2] net: axienet: use readx_poll_timeout() in mdio wait function vlan: Mark expected switch fall-through macvlan: Mark expected switch fall-through net/mlx4_en: ethtool, Remove unsupported SFP EEPROM high pages query ...
2019-05-21usbnet: fix kernel crash after disconnectKloetzke Jan1-0/+6
When disconnecting cdc_ncm the kernel sporadically crashes shortly after the disconnect: [ 57.868812] Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... [ 58.006653] PC is at 0x0 [ 58.009202] LR is at call_timer_fn+0xec/0x1b4 [ 58.013567] pc : [<0000000000000000>] lr : [<ffffff80080f5130>] pstate: 00000145 [ 58.020976] sp : ffffff8008003da0 [ 58.024295] x29: ffffff8008003da0 x28: 0000000000000001 [ 58.029618] x27: 000000000000000a x26: 0000000000000100 [ 58.034941] x25: 0000000000000000 x24: ffffff8008003e68 [ 58.040263] x23: 0000000000000000 x22: 0000000000000000 [ 58.045587] x21: 0000000000000000 x20: ffffffc68fac1808 [ 58.050910] x19: 0000000000000100 x18: 0000000000000000 [ 58.056232] x17: 0000007f885aff8c x16: 0000007f883a9f10 [ 58.061556] x15: 0000000000000001 x14: 000000000000006e [ 58.066878] x13: 0000000000000000 x12: 00000000000000ba [ 58.072201] x11: ffffffc69ff1db30 x10: 0000000000000020 [ 58.077524] x9 : 8000100008001000 x8 : 0000000000000001 [ 58.082847] x7 : 0000000000000800 x6 : ffffff8008003e70 [ 58.088169] x5 : ffffffc69ff17a28 x4 : 00000000ffff138b [ 58.093492] x3 : 0000000000000000 x2 : 0000000000000000 [ 58.098814] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 58.205800] [< (null)>] (null) [ 58.210521] [<ffffff80080f5298>] expire_timers+0xa0/0x14c [ 58.215937] [<ffffff80080f542c>] run_timer_softirq+0xe8/0x128 [ 58.221702] [<ffffff8008081120>] __do_softirq+0x298/0x348 [ 58.227118] [<ffffff80080a6304>] irq_exit+0x74/0xbc [ 58.232009] [<ffffff80080e17dc>] __handle_domain_irq+0x78/0xac [ 58.237857] [<ffffff8008080cf4>] gic_handle_irq+0x80/0xac ... The crash happens roughly 125..130ms after the disconnect. This correlates with the 'delay' timer that is started on certain USB tx/rx errors in the URB completion handler. The problem is a race of usbnet_stop() with usbnet_start_xmit(). In usbnet_stop() we call usbnet_terminate_urbs() to cancel all URBs in flight. This only makes sense if no new URBs are submitted concurrently, though. But the usbnet_start_xmit() can run at the same time on another CPU which almost unconditionally submits an URB. The error callback of the new URB will then schedule the timer after it was already stopped. The fix adds a check if the tx queue is stopped after the tx list lock has been taken. This should reliably prevent the submission of new URBs while usbnet_terminate_urbs() does its job. The same thing is done on the rx side even though it might be safe due to other flags that are checked there. Signed-off-by: Jan Klötzke <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13Thomas Gleixner1-13/+1
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details [based] [from] [clk] [highbank] [c] you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 355 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Jilayne Lovejoy <[email protected]> Reviewed-by: Steve Winslow <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2018-10-02net: usbnet: make driver_info constBen Dooks1-6/+6
The driver_info field that is used for describing each of the usb-net drivers using the usbnet.c core all declare their information as const and the usbnet.c itself does not try and modify the struct. It is therefore a good idea to make this const in the usbnet.c structure in case anyone tries to modify it. Signed-off-by: Ben Dooks <[email protected]> Signed-off-by: Ben Dooks <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-09-04net: usbnet: mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1077614 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-03-07net: usbnet: fix potential deadlock on 32bit hostsEric Dumazet1-4/+6
Marek reported a LOCKDEP issue occurring on 32bit host, that we tracked down to the fact that usbnet could either run from soft or hard irqs. This patch adds u64_stats_update_begin_irqsave() and u64_stats_update_end_irqrestore() helpers to solve this case. [ 17.768040] ================================ [ 17.772239] WARNING: inconsistent lock state [ 17.776511] 4.16.0-rc3-next-20180227-00007-g876c53a7493c #453 Not tainted [ 17.783329] -------------------------------- [ 17.787580] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 17.793607] swapper/0/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 17.798751] (&syncp->seq#5){?.-.}, at: [<9b22e5f0>] asix_rx_fixup_internal+0x188/0x288 [ 17.806790] {IN-HARDIRQ-W} state was registered at: [ 17.811677] tx_complete+0x100/0x208 [ 17.815319] __usb_hcd_giveback_urb+0x60/0xf0 [ 17.819770] xhci_giveback_urb_in_irq+0xa8/0x240 [ 17.824469] xhci_td_cleanup+0xf4/0x16c [ 17.828367] xhci_irq+0xe74/0x2240 [ 17.831827] usb_hcd_irq+0x24/0x38 [ 17.835343] __handle_irq_event_percpu+0x98/0x510 [ 17.840111] handle_irq_event_percpu+0x1c/0x58 [ 17.844623] handle_irq_event+0x38/0x5c [ 17.848519] handle_fasteoi_irq+0xa4/0x138 [ 17.852681] generic_handle_irq+0x18/0x28 [ 17.856760] __handle_domain_irq+0x6c/0xe4 [ 17.860941] gic_handle_irq+0x54/0xa0 [ 17.864666] __irq_svc+0x70/0xb0 [ 17.867964] arch_cpu_idle+0x20/0x3c [ 17.871578] arch_cpu_idle+0x20/0x3c [ 17.875190] do_idle+0x144/0x218 [ 17.878468] cpu_startup_entry+0x18/0x1c [ 17.882454] start_kernel+0x394/0x400 [ 17.886177] irq event stamp: 161912 [ 17.889616] hardirqs last enabled at (161912): [<7bedfacf>] __netdev_alloc_skb+0xcc/0x140 [ 17.897893] hardirqs last disabled at (161911): [<d58261d0>] __netdev_alloc_skb+0x94/0x140 [ 17.904903] exynos5-hsi2c 12ca0000.i2c: tx timeout [ 17.906116] softirqs last enabled at (161904): [<387102ff>] irq_enter+0x78/0x80 [ 17.906123] softirqs last disabled at (161905): [<cf4c628e>] irq_exit+0x134/0x158 [ 17.925722]. [ 17.925722] other info that might help us debug this: [ 17.933435] Possible unsafe locking scenario: [ 17.933435]. [ 17.940331] CPU0 [ 17.942488] ---- [ 17.944894] lock(&syncp->seq#5); [ 17.948274] <Interrupt> [ 17.950847] lock(&syncp->seq#5); [ 17.954386]. [ 17.954386] *** DEADLOCK *** [ 17.954386]. [ 17.962422] no locks held by swapper/0/0. Fixes: c8b5d129ee29 ("net: usbnet: support 64bit stats") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Marek Szyprowski <[email protected]> Cc: Greg Ungerer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-01-22usbnet: silence an unnecessary warningOliver Neukum1-5/+3
That a kevent could not be scheduled is not an error. Such handlers must be able to deal with multiple events anyway. As the successful scheduling of a work is a debug event, make the failure debug priority, too. V2: coding style Signed-off-by: Oliver Neukum <[email protected]> Reported-by: Cristian Caravena <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-12-07usbnet: fix alignment for frames with no ethernet headerBjørn Mork1-1/+4
The qmi_wwan minidriver support a 'raw-ip' mode where frames are received without any ethernet header. This causes alignment issues because the skbs allocated by usbnet are "IP aligned". Fix by allowing minidrivers to disable the additional alignment offset. This is implemented using a per-device flag, since the same minidriver also supports 'ethernet' mode. Fixes: 32f7adf633b9 ("net: qmi_wwan: support "raw IP" mode") Reported-and-tested-by: Jay Foster <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-10-18net/usb/usbnet: Convert timers to use timer_setup()Kees Cook1-7/+5
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Since the callback is called from both a timer and a tasklet, adjust the tasklet to pass the timer address too. When tasklets have their .data field removed, this can be refactored to call a central function after resolving the correct container_of() for a separate callback function for timer and tasklet. Cc: Oliver Neukum <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-05net/{mii, smsc}: Make mii_ethtool_get_link_ksettings and smc_netdev_get_ecmd ↵[email protected]1-1/+3
return void Make return value void since functions never returns meaningfull value. Signed-off-by: Yuval Shaia <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+15
Conflicts were simply overlapping changes. In the net/ipv4/route.c case the code had simply moved around a little bit and the same fix was made in both 'net' and 'net-next'. In the net/sched/sch_generic.c case a fix in 'net' happened at the same time that a new argument was added to qdisc_hash_add(). Signed-off-by: David S. Miller <[email protected]>
2017-04-06usbnet: make sure no NULL pointer is passed throughOliver Neukum1-4/+15
Coverity reports: ** CID 751368: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/usbnet.c: 1925 in __usbnet_read_cmd() ________________________________________________________________________________________________________ *** CID 751368: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/usbnet.c: 1925 in __usbnet_read_cmd() 1919 EXPORT_SYMBOL(usbnet_link_change); 1920 1921 /*-------------------------------------------------------------------------*/ 1922 static int __usbnet_read_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, 1923 u16 value, u16 index, void *data, u16 size) 1924 { >>> CID 751368: Null pointer dereferences (FORWARD_NULL) >>> Assigning: "buf" = "NULL". 1925 void *buf = NULL; 1926 int err = -ENOMEM; 1927 1928 netdev_dbg(dev->net, "usbnet_read_cmd cmd=0x%02x reqtype=%02x" 1929 " value=0x%04x index=0x%04x size=%d\n", 1930 cmd, reqtype, value, index, size); ** CID 751370: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/usbnet.c: 1952 in __usbnet_write_cmd() ________________________________________________________________________________________________________ *** CID 751370: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/usbnet.c: 1952 in __usbnet_write_cmd() 1946 } 1947 1948 static int __usbnet_write_cmd(struct usbnet *dev, u8 cmd, u8 reqtype, 1949 u16 value, u16 index, const void *data, 1950 u16 size) 1951 { >>> CID 751370: Null pointer dereferences (FORWARD_NULL) >>> Assigning: "buf" = "NULL". 1952 void *buf = NULL; 1953 int err = -ENOMEM; 1954 1955 netdev_dbg(dev->net, "usbnet_write_cmd cmd=0x%02x reqtype=%02x" 1956 " value=0x%04x index=0x%04x size=%d\n", 1957 cmd, reqtype, value, index, size); ** CID 1325026: Null pointer dereferences (FORWARD_NULL) /drivers/net/usb/ch9200.c: 143 in control_write() It is valid to offer commands without a buffer, but then you need a size of zero. This should actually be checked. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-06net: usbnet: Remove unused driver_name variableFlorian Fainelli1-2/+0
With GCC 6.3, we can get the following warning: drivers/net/usb/usbnet.c:85:19: warning: 'driver_name' defined but not used [-Wunused-const-variable=] static const char driver_name [] = "usbnet"; ^~~~~~~~~~~ Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-04-03net: usbnet: support 64bit statsGreg Ungerer1-4/+51
Add support for the net stats64 counters to the usbnet core. With that in place put the hooks into every usbnet driver to use it. This is a strait forward addition of 64bit counters for RX and TX packet and byte counts. It is done in the same style as for the other net drivers that support stats64. Note that the other stats fields remain as 32bit sized values (error counts, etc). The motivation to add this is that it is not particularly difficult to get the RX and TX byte counts to wrap on 32bit platforms. Signed-off-by: Greg Ungerer <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-21net: usb: usb: remove old api ethtool_{get|set}_settingsPhilippe Reynes1-35/+0
The function usbnet_{get|set}_settings is no longer used, so we remove it. Signed-off-by: Philippe Reynes <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-03-21net: usb: usbnet: add new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-0/+36
The ethtool api {get|set}_settings is deprecated. We add the new api {get|set}_link_ksettings to this driver. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-10-20net: use core MTU range checking in USB NIC driversJarod Wilson1-2/+2
usbnet: - Remove stale new_mtu <= 0 check in usbnet.c - Set min_mtu = 0, max_mtu = 65535 (sub-drivers must set their own max_mtu and/or min_mtu as needed) r8152: - Set appropriate max_mtu for different variants (1500 or 9194) lan78xx: - Set max_mtu = 9000 asix_driver: - max_mtu = 16384 for ax88178 variant ax88179: - max_mtu = 4088 cdc_ncm: - max_mtu from hardware cdc-phonet: - min_mtu = 6, max_mtu = 65541 sierra_net: - max_mtu = 1500, call usbnet_change_mtu directly - sierra_net_change_mtu checked for MTU > 1500, then called usbnet_change_mtu, but if we set max_mtu to let the network core handle the range check, then we can simply call usbnet_change_mtu directly smsc75xx: - max_mtu = 9000 CC: [email protected] CC: Woojung Huh <[email protected]> CC: Microchip Linux Driver Support <[email protected]> CC: Hayes Wang <[email protected]> CC: Oliver Neukum <[email protected]> CC: Steve Glendinning <[email protected]> Signed-off-by: Jarod Wilson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-08-13net: usb: usbnet: don't print error when allocating urb failsWolfram Sang1-4/+1
kmalloc will print enough information in case of failure. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-24Merge tag 'usb-4.8-rc1' of ↵Linus Torvalds1-138/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big USB driver update for 4.8-rc1. Lots of the normal stuff in here, musb, gadget, xhci, and other updates and fixes. All of the details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits) cdc-acm: beautify probe() cdc-wdm: use the common CDC parser cdc-acm: cleanup error handling cdc-acm: use the common parser usbnet: move the CDC parser into USB core usb: musb: sunxi: Simplify dr_mode handling usb: musb: sunxi: make unexported symbols static usb: musb: cppi41: add dma channel tracepoints usb: musb: cppi41: move struct cppi41_dma_channel to header usb: musb: cleanup cppi_dma header usb: musb: gadget: add usb-request tracepoints usb: musb: host: add urb tracepoints usb: musb: add tracepoints to dump interrupt events usb: musb: add tracepoints for register access usb: musb: dsps: use musb register read/write wrappers instead usb: musb: switch dev_dbg to tracepoints usb: musb: add tracepoints support for debugging usb: quirks: Add no-lpm quirk for Elan phy: rcar-gen3-usb2: fix mutex_lock calling in interrupt phy: rockhip-usb: use devm_add_action_or_reset() ...
2016-07-18usbnet: move the CDC parser into USB coreOliver Neukum1-138/+0
The dependencies were impossible to handle preventing drivers for CDC devices not which are not network drivers from using the common parser. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2016-06-30usbnet: Stop RX Q on MTU changeSoohoon Lee1-3/+7
When MTU is changed unlink_urbs() flushes RX Q but mean while usbnet_bh() can fill up the Q at the same time. Depends on which HCD is down there unlink takes long time then the flush never ends. Signed-off-by: Soohoon Lee <[email protected]> Reviewed-by: Kimball Murray <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal1-2/+2
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Florian Westphal <[email protected]> Acked-by: Felipe Balbi <[email protected]> Acked-by: Mugunthan V N <[email protected]> Acked-by: Antonio Quartulli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-05-03usbnet: correct speed testingOliver Neukum1-0/+1
Allow for SS+ USB Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-03-07usbnet: cleanup after bind() in probe()Oliver Neukum1-0/+7
In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-12-04usbnet: allow mini-drivers to consume L2 headersBjørn Mork1-1/+4
Assume the minidriver has taken care of all L2 header parsing if it sets skb->protocol. This allows the minidriver to support non-ethernet L2 headers, and even operate without any L2 header at all. Signed-off-by: Bjørn Mork <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-11-10usbnet: remove ifdefed out call to dma_supportedChristoph Hellwig1-6/+0
Signed-off-by: Christoph Hellwig <[email protected]> Cc: Oliver Neukum <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2015-09-15CDC: common parser for extra headersOliver Neukum1-0/+138
CDC drivers all implement their own parser for the extra headers. This patch fixes the code duplication introducing a single common parser in usbnet. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-09-08usbnet: Fix a race between usbnet_stop() and the BHEugene Shatokhin1-11/+28
The race may happen when a device (e.g. YOTA 4G LTE Modem) is unplugged while the system is downloading a large file from the Net. Hardware breakpoints and Kprobes with delays were used to confirm that the race does actually happen. The race is on skb_queue ('next' pointer) between usbnet_stop() and rx_complete(), which, in turn, calls usbnet_bh(). Here is a part of the call stack with the code where the changes to the queue happen. The line numbers are for the kernel 4.1.0: *0 __skb_unlink (skbuff.h:1517) prev->next = next; *1 defer_bh (usbnet.c:430) spin_lock_irqsave(&list->lock, flags); old_state = entry->state; entry->state = state; __skb_unlink(skb, list); spin_unlock(&list->lock); spin_lock(&dev->done.lock); __skb_queue_tail(&dev->done, skb); if (dev->done.qlen == 1) tasklet_schedule(&dev->bh); spin_unlock_irqrestore(&dev->done.lock, flags); *2 rx_complete (usbnet.c:640) state = defer_bh(dev, skb, &dev->rxq, state); At the same time, the following code repeatedly checks if the queue is empty and reads these values concurrently with the above changes: *0 usbnet_terminate_urbs (usbnet.c:765) /* maybe wait for deletions to finish. */ while (!skb_queue_empty(&dev->rxq) && !skb_queue_empty(&dev->txq) && !skb_queue_empty(&dev->done)) { schedule_timeout(msecs_to_jiffies(UNLINK_TIMEOUT_MS)); set_current_state(TASK_UNINTERRUPTIBLE); netif_dbg(dev, ifdown, dev->net, "waited for %d urb completions\n", temp); } *1 usbnet_stop (usbnet.c:806) if (!(info->flags & FLAG_AVOID_UNLINK_URBS)) usbnet_terminate_urbs(dev); As a result, it is possible, for example, that the skb is removed from dev->rxq by __skb_unlink() before the check "!skb_queue_empty(&dev->rxq)" in usbnet_terminate_urbs() is made. It is also possible in this case that the skb is added to dev->done queue after "!skb_queue_empty(&dev->done)" is checked. So usbnet_terminate_urbs() may stop waiting and return while dev->done queue still has an item. Locking in defer_bh() and usbnet_terminate_urbs() was revisited to avoid this race. Signed-off-by: Eugene Shatokhin <[email protected]> Reviewed-by: Bjørn Mork <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25usbnet: Get EVENT_NO_RUNTIME_PM bit before it is clearedEugene Shatokhin1-3/+4
It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in usbnet_stop(), but its value should be read before it is cleared when dev->flags is set to 0. The problem was spotted and the fix was provided by Oliver Neukum <[email protected]>. Signed-off-by: Eugene Shatokhin <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-05-09usbnet: avoid integer overflow in start_xmitJason A. Donenfeld1-2/+2
transfer_buffer_length is of type u32. It's therefore wrong to assign it to a signed integer. This patch avoids the overflow. It's worth noting that entry->length here is a long; perhaps it would be beneficial at somepoint to change this to be unsigned as well, if nothing else relies on its signedness for error conditions or the like. Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-04-09usbnet: rename work handlerOliver Neukum1-2/+2
"kevent" is an extremely generic name that causes trouble if debugging for work queues is used. So change it to something clear. Signed-off-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-03-29usbnet: Fix tx_bytes statistic running backward in cdc_ncmBen Hutchings1-3/+13
cdc_ncm disagrees with usbnet about how much framing overhead should be counted in the tx_bytes statistics, and tries 'fix' this by decrementing tx_bytes on the transmit path. But statistics must never be decremented except due to roll-over; this will thoroughly confuse user-space. Also, tx_bytes is only incremented by usbnet in the completion path. Fix this by requiring drivers that set FLAG_MULTI_FRAME to set a tx_bytes delta along with the tx_packets count. Fixes: beeecd42c3b4 ("net: cdc_ncm/cdc_mbim: adding NCM protocol statistics") Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Bjørn Mork <[email protected]>
2015-03-29usbnet: Fix tx_packets stat for FLAG_MULTI_FRAME driversBen Hutchings1-2/+3
Currently the usbnet core does not update the tx_packets statistic for drivers with FLAG_MULTI_PACKET and there is no hook in the TX completion path where they could do this. cdc_ncm and dependent drivers are bumping tx_packets stat on the transmit path while asix and sr9800 aren't updating it at all. Add a packet count in struct skb_data so these drivers can fill it in, initialise it to 1 for other drivers, and add the packet count to the tx_packets statistic on completion. Signed-off-by: Ben Hutchings <[email protected]> Tested-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-01-25usbnet: re-use native hex2bin()Andy Shevchenko1-9/+8
Call hex2bin() library function, instead of doing conversion here. Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-28usbnet: add a callback for set_rx_modeOlivier Blin1-0/+20
To delegate promiscuous mode and multicast filtering to the subdriver. Signed-off-by: Olivier Blin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-09-23usb: hub: rename khubd to hub_wq in documentation and commentsPetr Mladek1-6/+8
USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.