aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/usb/smsc75xx.c
AgeCommit message (Collapse)AuthorFilesLines
2012-05-07smsc75xx: replace 0xffff with PHY_INT_SRC_CLEAR_ALLSteve Glendinning1-1/+2
This patch defines PHY_INT_SRC_CLEAR_ALL to replace the value 0xffff in order to be more self-documenting. This patch should make no functional change, it is purely cosmetic. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: enable mac to detect speed/duplex from phySteve Glendinning1-0/+8
This patch sets the automatic speed and duplex detection bits in MAC_CR to enable the mac to determine its speed automatically from the phy. Note this must be done BEFORE the receiver or transmitter is enabled. Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: declare smsc75xx's MII as GMII capableSteve Glendinning1-0/+3
also explicitly set the phy to advertise 1000 speeds Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: fix phy interrupt acknowledgeSteve Glendinning1-5/+7
smsc75xx phy interrupt acknowledge needs an mdio_write to clear PHY_INT_SRC instead of just a read like in smsc95xx. Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: fix phy init reset loopSteve Glendinning1-1/+1
fix bug in phy_init loop that was ignoring BMCR reset bit, akin to smsc95xx's d946092000698fd204d82a9d239103c656fb63bf Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: add more information to register io failure warningsSteve Glendinning1-2/+2
Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: fix mdio reads and writesSteve Glendinning1-2/+2
smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O. Note smsc75xx is different from smsc95xx in this regard. Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-30smsc75xx: mark link down on startup and let PHY interrupt deal with carrier ↵Steve Glendinning1-1/+1
changes This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-04-16net: usb: smsc75xx: fix mtuStephane Fillod1-0/+1
Make smsc75xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1492 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Omap3 with EVB-LAN7500-LC. Signed-off-by: Stephane Fillod <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka1-1/+1
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-01-07Merge branch 'driver-core-next' of ↵Linus Torvalds1-11/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h
2012-01-06Merge branch 'driver-core-next' into Linux 3.2Greg Kroah-Hartman1-11/+1
This resolves the conflict in the arch/arm/mach-s3c64xx/s3c6400.c file, and it fixes the build error in the arch/x86/kernel/microcode_core.c file, that the merge did not catch. The microcode_core.c patch was provided by Stephen Rothwell <[email protected]> who was invaluable in the merge issues involved with the large sysdev removal process in the driver-core tree. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-12-19module_param: make bool parameters really bool (net & drivers/net)Rusty Russell1-1/+1
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. (Thanks to Joe Perches for suggesting coccinelle for 0/1 -> true/false). Cc: "David S. Miller" <[email protected]> Cc: [email protected] Signed-off-by: Rusty Russell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-11-18USB: convert drivers/net/* to use module_usb_driver()Greg Kroah-Hartman1-11/+1
This converts the drivers in drivers/net/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Wolfgang Grandegger <[email protected]> Cc: Samuel Ortiz <[email protected]> Cc: Oliver Neukum <[email protected]> Cc: Peter Korsgaard <[email protected]> Cc: Petko Manolov <[email protected]> Cc: Steve Glendinning <[email protected]> Cc: Christian Lamparter <[email protected]> Cc: "John W. Linville" <[email protected]> Cc: Dan Williams <[email protected]> Cc: Jussi Kivilinna <[email protected]> Cc: Ivo van Doorn <[email protected]> Cc: Gertjan van Wingerde <[email protected]> Cc: Helmut Schaa <[email protected]> Cc: Herton Ronaldo Krzesinski <[email protected]> Cc: Hin-Tak Leung <[email protected]> Cc: Larry Finger <[email protected]> Cc: Chaoming Li <[email protected]> Cc: Lucas De Marchi <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Roel Kluin <[email protected]> Cc: Paul Gortmaker <[email protected]> Cc: Jiri Pirko <[email protected]> Cc: Pavel Roskin <[email protected]> Cc: Yoann DI-RUZZA <[email protected]> Cc: George <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław1-1/+2
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-11-08Fix incorrect usage of NET_IP_ALIGNNico Erfurth1-3/+4
The driver used NET_IP_ALIGN to remove some additional padding inside of the rx_fixup function. On many architectures NET_IP_ALIGN defaults to 2 which removed the correct amount of bytes. On MCORE2-machines commit ea812ca1b06113597adcd8e70c0f84a413d97544 introduces a change which sets NET_IP_ALIGN to 0 by default. Which triggered the bug on these machines. This fix introduces a new RXW_PADDING define and uses this instead of NET_IP_ALIGN. The name was taken from the original SMSC7500 driver which is provided by SMSC. Signed-off-by: Nico Erfurth <[email protected]> Tested-by: Phil Sutter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko1-1/+1
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-04-29ethtool: Call ethtool's get/set_settings callbacks with cleaned dataDavid Decotigny1-3/+4
This makes sure that when a driver calls the ethtool's get/set_settings() callback of another driver, the data passed to it is clean. This guarantees that speed_hi will be zeroed correctly if the called callback doesn't explicitely set it: we are sure we don't get a corrupted speed from the underlying driver. We also take care of setting the cmd field appropriately (ETHTOOL_GSET/SSET). This applies to dev_ethtool_get_settings(), which now makes sure it sets up that ethtool command parameter correctly before passing it to drivers. This also means that whoever calls dev_ethtool_get_settings() does not have to clean the ethtool command parameter. This function also becomes an exported symbol instead of an inline. All drivers visible to make allyesconfig under x86_64 have been updated. Signed-off-by: David Decotigny <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-04-01net: convert SMSC USB net drivers to hw_featuresMichał Mirosław1-80/+44
There's a race (not fixed here) in smsc75xx in setting RFE_CTL that's not properly handled via rfe_ctl_lock. Spinlock is not a good tool here, as this has to wait for URB completion (or maybe just submission) after issuing register write request. Otherwise, the rfe_ctl might be changed just after spin_unlock() and device left programmed with other value. smsc95xx has increased hard_header_len for the case of TX checksumming. smsc75xx is fixed to advertise IP+IPV6_CSUM instead of HW_CSUM as it does not use csum_start/csum_offset. Signed-off-by: Michał Mirosław <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-04-11Merge branch 'master' of ↵David S. Miller1-0/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/stmmac/stmmac_main.c drivers/net/wireless/wl12xx/wl1271_cmd.c drivers/net/wireless/wl12xx/wl1271_main.c drivers/net/wireless/wl12xx/wl1271_spi.c net/core/ethtool.c net/mac80211/scan.c
2010-04-03net: convert multicast list to list_headJiri Pirko1-3/+3
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <[email protected]> Guess-its-ok-by: Christoph Lameter <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Lee Schermerhorn <[email protected]>
2010-03-16smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driverSteve Glendinning1-0/+1288
This patch adds a driver for SMSC's LAN7500 family of USB 2.0 to gigabit ethernet adapters. It's loosely based on the smsc95xx driver but the device registers for LAN7500 are completely different. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.