aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)AuthorFilesLines
2006-07-05[PATCH] Add support for the Cicada 8201 PHYKim Phillips1-6/+36
Add support for the Cicada 8201 PHY, a.k.a Vitesse VSC8201. This PHY is present on the MPC8349mITX. Signed-off-by: Kim Phillips <[email protected]> Signed-off-by: Andy Fleming <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2006-07-02[PATCH] irq-flags: drivers/net: Use the new IRQF_ constantsThomas Gleixner1-1/+1
Signed-off-by: Thomas Gleixner <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Jeff Garzik <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel8-8/+0
Signed-off-by: Jörn Engel <[email protected]> Signed-off-by: Adrian Bunk <[email protected]>
2006-06-26[PATCH] Fix phy id for LXT971A/LXT972AUwe Zeisberger1-4/+4
From: Uwe Zeisberger <[email protected]> The phy ids used are taken from an driver that used a right shift of 4 to chop off the revision number. This driver does not shift, so the id and mask values are wrong and must be left shifted by 4 to actually detect the chips. Signed-off-by: Uwe Zeisberger <[email protected]> Acked-by: Andy Fleming <[email protected]> [akpm: this is a previously-nacked patch, but the problem is real] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2006-06-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds3-0/+118
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (139 commits) [POWERPC] re-enable OProfile for iSeries, using timer interrupt [POWERPC] support ibm,extended-*-frequency properties [POWERPC] Extra sanity check in EEH code [POWERPC] Dont look for class-code in pci children [POWERPC] Fix mdelay badness on shared processor partitions [POWERPC] disable floating point exceptions for init [POWERPC] Unify ppc syscall tables [POWERPC] mpic: add support for serial mode interrupts [POWERPC] pseries: Print PCI slot location code on failure [POWERPC] spufs: one more fix for 64k pages [POWERPC] spufs: fail spu_create with invalid flags [POWERPC] spufs: clear class2 interrupt status before wakeup [POWERPC] spufs: fix Makefile for "make clean" [POWERPC] spufs: remove stop_code from struct spu [POWERPC] spufs: fix spu irq affinity setting [POWERPC] spufs: further abstract priv1 register access [POWERPC] spufs: split the Cell BE support into generic and platform dependant parts [POWERPC] spufs: dont try to access SPE channel 1 count [POWERPC] spufs: use kzalloc in create_spu [POWERPC] spufs: fix initial state of wbox file ... Manually resolved conflicts in: drivers/net/phy/Makefile include/asm-powerpc/spu.h
2006-06-21[POWERPC] Add Vitesse 8244 PHY for MPC8641 HPCN platform.Jon Loeliger3-0/+118
Signed-off-by: Kriston Carson <[email protected]> Signed-off-by: Xianghua Xiao <[email protected]> Signed-off-by: Jon Loeliger <[email protected]> Acked-by: Jeff Garzik <[email protected]> Signed-off-by: Paul Mackerras <[email protected]>
2006-05-24[PATCH] phy: new SMSC LAN83C185 PHY driverHerbert Valerio Riedel3-0/+108
new SMSC LAN83C185 10BaseT/100BaseTX PHY driver for the PHY subsystem Signed-off-by: Herbert Valerio Riedel <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2006-05-10phy: mdiobus_register(): initialize all phy_map entriesHerbert Valerio Riedel1-1/+3
make sure phy_map entries whose PHY address is masked are initialized to NULL, given that other code (such as mdiobus_unregister for instance) assumes that non-NULL phy_map entries are allocated phy_devices Signed-off-by: Herbert Valerio Riedel <[email protected]> Signed-off-by: Stephen Hemminger <[email protected]>
2006-03-03Massive net driver const-ification.Arjan van de Ven1-1/+1
2006-01-12[PATCH] phy: Added a macro to represent the string format used to match a ↵Kumar Gala2-2/+2
phy device Add the PHY_ID_FMT macro to ensure that the format of the id string used by a driver to match to its specific phy is consistent between the mdio_bus and the driver. Signed-off-by: Kumar Gala <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2006-01-06[PATCH] s390: cleanup KconfigMartin Schwidefsky1-1/+1
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2005-12-24[PATCH] missing license for libphy.koOlaf Hering1-0/+4
Andy, libphy has no license tag. Something like the attached (untested!) patch is needed. Hopefully such a change finds its way into 2.6.15. filename: /lib/modules/2.6.15-rc5-3-ppc64/kernel/drivers/net/phy/libphy.ko vermagic: 2.6.15-rc5-3-ppc64 SMP gcc-4.1 depends: srcversion: ACC921B5E82701BE1E6F603 drivers/net/phy/phy_device.c | 4 ++++ 1 files changed, 4 insertions(+) Signed-off-by: Jeff Garzik <[email protected]>
2005-11-05Remove linux/version.h include from drivers/net/phy/* and net/ieee80211/*.Jeff Garzik8-8/+0
Unused, and causes the files to be needlessly rebuilt in some cases.
2005-11-05[PATCH] phy address mask support for generic phy layerMatt Porter1-0/+3
Adds a phy_mask field to struct mii_bus and uses it. This field indicates each phy address to be ignored when probing the mdio bus. This support is needed for the fs_enet and ibm_emac drivers to be converted to the generic phy layer among other drivers. Many systems lock up on probing certain phy addresses or probing doesn't return 0xffff when nothing is found at the address. A new driver I'm working on also makes use of this mask. Signed-off-by: Matt Porter <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2005-10-28Merge ../bleed-2.6Greg KH3-19/+0
2005-10-28[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King1-14/+6
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2005-09-23[netdrvr] delete CONFIG_PHYCONTROLJeff Garzik3-19/+0
2005-09-05[PATCH] Kconfig fix (PHYLIB vs. s390)[email protected]1-1/+1
drivers/net/phy/phy.c is broken on s390; it uses enable_irq() and friends and these do not exist on s390. Marked as broken for now. Signed-off-by: Al Viro <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2005-09-05[PATCH] 'mdio_bus_exit' in discarded section .text.exitPeter Chubb1-1/+1
When building with CONFIG_PHYLIB=y on Itanium, I see: `mdio_bus_exit' referenced in section `.init.text' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o I believe that mdio_bus_exit should not be declared __exit, because it is referencesd from __init sections in, say, phy_init(). Signed-off-by: Peter Chubb <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2005-09-05[PATCH] swsusp: fix remaining u32 vs. pm_message_t confusionPavel Machek1-1/+1
Fix remaining bits of u32 vs. pm_message confusion. Should not break anything. Signed-off-by: Pavel Machek <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2005-08-28[PATCH] PHY Layer fixupAndy Fleming5-102/+493
This patch adds back the code that was taken out, thus re-enabling: * The PHY Layer to initialize without crashing * Drivers to actually connect to PHYs * The entire PHY Control Layer This patch is used by the gianfar driver, and other drivers which are in development. Signed-off-by: Andy Fleming <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
2005-08-11phy subsystem: more cleanupsJeff Garzik4-397/+12
- unexport symbols never used outside of home module - remove dead code - remove CONFIG_PHYCONTROL, make it unconditionally enabled
2005-08-11Fix numerous minor problems with new phy subsystem.Jeff Garzik6-892/+53
Includes fixes for problems noted by Adrian Bunk, Andrew Morton, and one other person lost in the annals of history (and email folders).
2005-07-30This patch adds a PHY Abstraction Layer to the Linux Kernel, enablingAndy Fleming11-0/+3434
ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details. Signed-off-by: Andy Fleming <[email protected]> Signed-off-by: Jeff Garzik <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.