aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/phy
AgeCommit message (Collapse)AuthorFilesLines
2020-03-03phylink: Improve error message when validate failedHauke Mehrtens1-1/+7
This should improve the error message when the PHY validate in the MAC driver failed. I ran into this problem multiple times that I put wrong interface values into the device tree and was searching why it is failing with -22 (-EINVAL). This should make it easier to spot the problem. Signed-off-by: Hauke Mehrtens <[email protected]> Acked-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-03net: phy: bcm63xx: fix OOPS due to missing driver nameJonas Gorski1-0/+1
719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") was a bit over-eager and also removed the second phy driver's name, resulting in a nasty OOPS on registration: [ 1.319854] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804dd50c, ra == 804dd4f0 [ 1.330859] Oops[#1]: [ 1.333138] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.22 #0 [ 1.339217] $ 0 : 00000000 00000001 87ca7f00 805c1874 [ 1.344590] $ 4 : 00000000 00000047 00585000 8701f800 [ 1.349965] $ 8 : 8701f800 804f4a5c 00000003 64726976 [ 1.355341] $12 : 00000001 00000000 00000000 00000114 [ 1.360718] $16 : 87ca7f80 00000000 00000000 80639fe4 [ 1.366093] $20 : 00000002 00000000 806441d0 80b90000 [ 1.371470] $24 : 00000000 00000000 [ 1.376847] $28 : 87c1e000 87c1fda0 80b90000 804dd4f0 [ 1.382224] Hi : d1c8f8da [ 1.385180] Lo : 5518a480 [ 1.388182] epc : 804dd50c kset_find_obj+0x3c/0x114 [ 1.393345] ra : 804dd4f0 kset_find_obj+0x20/0x114 [ 1.398530] Status: 10008703 KERNEL EXL IE [ 1.402833] Cause : 00800008 (ExcCode 02) [ 1.406952] BadVA : 00000000 [ 1.409913] PrId : 0002a075 (Broadcom BMIPS4350) [ 1.414745] Modules linked in: [ 1.417895] Process swapper/0 (pid: 1, threadinfo=(ptrval), task=(ptrval), tls=00000000) [ 1.426214] Stack : 87cec000 80630000 80639370 80640658 80640000 80049af4 80639fe4 8063a0d8 [ 1.434816] 8063a0d8 802ef078 00000002 00000000 806441d0 80b90000 8063a0d8 802ef114 [ 1.443417] 87cea0de 87c1fde0 00000000 804de488 87cea000 8063a0d8 8063a0d8 80334e48 [ 1.452018] 80640000 8063984c 80639bf4 00000000 8065de48 00000001 8063a0d8 80334ed0 [ 1.460620] 806441d0 80b90000 80b90000 802ef164 8065dd70 80620000 80b90000 8065de58 [ 1.469222] ... [ 1.471734] Call Trace: [ 1.474255] [<804dd50c>] kset_find_obj+0x3c/0x114 [ 1.479141] [<802ef078>] driver_find+0x1c/0x44 [ 1.483665] [<802ef114>] driver_register+0x74/0x148 [ 1.488719] [<80334e48>] phy_driver_register+0x9c/0xd0 [ 1.493968] [<80334ed0>] phy_drivers_register+0x54/0xe8 [ 1.499345] [<8001061c>] do_one_initcall+0x7c/0x1f4 [ 1.504374] [<80644ed8>] kernel_init_freeable+0x1d4/0x2b4 [ 1.509940] [<804f4e24>] kernel_init+0x10/0xf8 [ 1.514502] [<80018e68>] ret_from_kernel_thread+0x14/0x1c [ 1.520040] Code: 1060000c 02202025 90650000 <90810000> 24630001 14250004 24840001 14a0fffb 90650000 [ 1.530061] [ 1.531698] ---[ end trace d52f1717cd29bdc8 ]--- Fix it by readding the name. Fixes: 719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap") Signed-off-by: Jonas Gorski <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-01net: phy: mscc: add constants for used interrupt mask bitsHeiner Kallweit1-2/+8
Add constants for the used interrupts bits. This avoids the magic number for MII_VSC85XX_INT_MASK_MASK. Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-01net: phy: avoid clearing PHY interrupts twice in irq handlerHeiner Kallweit1-1/+2
On all PHY drivers that implement did_interrupt() reading the interrupt status bits clears them. This means we may loose an interrupt that is triggered between calling did_interrupt() and phy_clear_interrupt(). As part of the fix make it a requirement that did_interrupt() clears the interrupt. The Fixes tag refers to the first commit where the patch applies cleanly. Fixes: 49644e68f472 ("net: phy: add callback for custom interrupt handler to struct phy_driver") Reported-by: Michael Walle <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-10/+16
The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: phylink: propagate resolved link config via mac_link_up()Russell King1-2/+7
Propagate the resolved link parameters via the mac_link_up() call for MACs that do not automatically track their PCS state. We propagate the link parameters via function arguments so that inappropriate members of struct phylink_link_state can't be accessed, and creating a new structure just for this adds needless complexity to the API. Tested-by: Andre Przywara <[email protected]> Tested-by: Alexandre Belloni <[email protected]> Tested-by: Vladimir Oltean <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: phy: marvell10g: read copper results from CSSR1Russell King1-52/+89
Read the copper autonegotiation results from the copper specific status register, rather than decoding the advertisements. Reading what the link is actually doing will allow us to support downshift modes. Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: phy: marvell: don't interpret PHY status unless resolvedRussell King1-0/+5
Don't attempt to interpret the PHY specific status register unless the PHY is indicating that the resolution is valid. Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Russell King <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-26net: phy: mscc: fix firmware pathsAntoine Tenart1-2/+2
The firmware paths for the VSC8584 PHYs not not contain the leading 'microchip/' directory, as used in linux-firmware, resulting in an error when probing the driver. This patch fixes it. Fixes: a5afc1678044 ("net: phy: mscc: add support for VSC8584 PHY") Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-26net: phy: mscc: add missing shift for media operation mode selectionAntoine Tenart1-3/+3
This patch adds a missing shift for the media operation mode selection. This does not fix the driver as the current operation mode (copper) has a value of 0, but this wouldn't work for other modes. Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-26net: phy: corrected the return value for genphy_check_and_restart_aneg and ↵Sudheesh Mavila2-6/+6
genphy_c45_check_and_restart_aneg When auto-negotiation is not required, return value should be zero. Changes v1->v2: - improved comments and code as Andrew Lunn and Heiner Kallweit suggestion - fixed issue in genphy_c45_check_and_restart_aneg as Russell King suggestion. Fixes: 2a10ab043ac5 ("net: phy: add genphy_check_and_restart_aneg()") Fixes: 1af9f16840e9 ("net: phy: add genphy_c45_check_and_restart_aneg()") Signed-off-by: Sudheesh Mavila <[email protected]> Reviewed-by: Heiner Kallweit <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24mdio_bus: Add generic mdio_find_bus()Jeremy Linton1-0/+17
It appears most ethernet drivers follow one of two main strategies for mdio bus/phy management. A monolithic model where the net driver itself creates, probes and uses the phy, and one where an external mdio/phy driver instantiates the mdio bus/phy and the net driver only attaches to a known phy. Usually in this latter model the phys are discovered via DT relationships or simply phy name/address hardcoding. This is a shame because modern well behaved mdio buses are self describing and can be probed. The mdio layer itself is fully capable of this, yet there isn't a clean way for a standalone net driver to attach and enumerate the discovered devices. This is because outside of of_mdio_find_bus() there isn't a straightforward way to acquire the mii_bus pointer. So, lets add a mdio_find_bus which can return the mii_bus based only on its name. Signed-off-by: Jeremy Linton <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-23net: phy: Avoid multiple suspendsFlorian Fainelli1-2/+3
It is currently possible for a PHY device to be suspended as part of a network device driver's suspend call while it is still being attached to that net_device, either via phy_suspend() or implicitly via phy_stop(). Later on, when the MDIO bus controller get suspended, we would attempt to suspend again the PHY because it is still attached to a network device. This is both a waste of time and creates an opportunity for improper clock/power management bugs to creep in. Fixes: 803dd9c77ac3 ("net: phy: avoid suspending twice a PHY") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-2/+22
Conflict resolution of ice_virtchnl_pf.c based upon work by Stephen Rothwell. Signed-off-by: David S. Miller <[email protected]>
2020-02-21net: phy: dp83867: Add speed optimization featureDan Murphy1-0/+150
Set the speed optimization bit on the DP83867 PHY. This feature can also be strapped on the 64 pin PHY devices but the 48 pin devices do not have the strap pin available to enable this feature in the hardware. PHY team suggests to have this bit set. With this bit set the PHY will auto negotiate and report the link parameters in the PHYSTS register. This register provides a single location within the register set for quick access to commonly accessed information. In this case when auto negotiation is on the PHY core reads the bits that have been configured or if auto negotiation is off the PHY core reads the BMCR register and sets the phydev parameters accordingly. This Giga bit PHY can throttle the speed to 100Mbps or 10Mbps to accomodate a 4-wire cable. If this should occur the PHYSTS register contains the current negotiated speed and duplex mode. In overriding the genphy_read_status the dp83867_read_status will do a genphy_read_status to setup the LP and pause bits. And then the PHYSTS register is read and the phydev speed and duplex mode settings are updated. Signed-off-by: Dan Murphy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-19net: phy: broadcom: Wire suspend/resume for BCM54810Florian Fainelli1-0/+16
The BCM54810 PHY can use the standard BMCR Power down suspend, but needs a custom resume routine which first clear the Power down bit, and then re-initializes the PHY. While in low-power mode, the PHY only accepts writes to the BMCR register. The datasheet clearly says it: Reads or writes to any MII register other than MII Control register (address 00h) while the device is in the standby power-down mode may cause unpredictable results. Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-19net: phy: broadcom: Have bcm54xx_adjust_rxrefclk() check for flagsFlorian Fainelli1-4/+1
bcm54xx_adjust_rxrefclk() already checks for PHY_BRCM_AUTO_PWRDWN_ENABLE and PHY_BRCM_DIS_TXCRXC_NOENRGY in order to set the appropriate bit. The situation is a bit more complicated with the flag PHY_BRCM_RX_REFCLK_UNUSED but essentially amounts to the same situation. The default setting for the 125MHz clock is to be on for all PHYs and we still treat BCM50610 and BCM50610M specifically with the polarity of the bit reversed. Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-19net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()Florian Fainelli1-1/+2
The function bcm54xx_adjust_rxrefclk() works correctly on the BCM54810 PHY, allow this device ID to proceed through. Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-19phy: avoid unnecessary link-up delay in polling modePetr Oros2-4/+6
commit 93c0970493c71f ("net: phy: consider latched link-down status in polling mode") removed double-read of latched link-state register for polling mode from genphy_update_link(). This added extra ~1s delay into sequence link down->up. Following scenario: - After boot link goes up - phy_start() is called triggering an aneg restart, hence link goes down and link-down info is latched. - After aneg has finished link goes up. In phy_state_machine is checked link state but it is latched "link is down". The state machine is scheduled after one second and there is detected "link is up". This extra delay can be avoided when we keep link-state register double read in case when link was down previously. With this solution we don't miss a link-down event in polling mode and link-up is faster. Details about this quirky behavior on Realtek phy: Without patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), here i read link-down (BMSR_LSTATUS==0), T0+5s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), up-to-date link-up is read (BMSR_LSTATUS==1), phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING With patch: T0: aneg is started, link goes down, link-down status is latched T0+3s: state machine runs, up-to-date link-down is read T0+4s: state machine runs, aneg is finished (BMSR_ANEGCOMPLETE==1), first BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==0, second BMSR read: BMSR_ANEGCOMPLETE==1 and BMSR_LSTATUS==1, phydev->link goes up, state change PHY_NOLINK to PHY_RUNNING Signed-off-by: Petr Oros <[email protected]> Reviewed-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-18ethtool: Add support for low latency RS FECAya Levin1-1/+1
Add support for low latency Reed Solomon FEC as LLRS. The LL-FEC is defined by the 25G/50G ethernet consortium, in the document titled "Low Latency Reed Solomon Forward Error Correction" Signed-off-by: Aya Levin <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> CC: Andrew Lunn <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Reviewed-by: Andrew Lunn <[email protected]>
2020-02-18net: phy: broadcom: Fix a typo ("firsly")Jonathan Neuschäfer1-2/+2
Signed-off-by: Jonathan Neuschäfer <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-17net: phy: allow bcm84881 to be a moduleRussell King1-2/+2
Now that the phylib module loading issue has been resolved, we can allow this PHY driver to be built as a module. Signed-off-by: Russell King <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: phylink: improve initial mac configurationRussell King1-2/+34
Improve the initial MAC configuration so we get a configuration which more represents the final operating mode, in particular with respect to the flow control settings. We do this by: 1) more fully initialising our phy state, so we can use this as the initial state for PHY based connections. 2) reading the fixed link state. 3) ensuring that in-band mode has sane pause settings for SGMII vs 802.3z negotiation modes. In all three cases, we ensure that state->link is false, just in case any MAC drivers have other ideas by mis-using this member, and we also take account of manual pause mode configuration at this point. This avoids MLO_PAUSE_AN being seen in mac_config() when operating in PHY, fixed mode or inband SGMII mode, thereby giving cleaner semantics to the pause flags. As a result of this, the pause flags now indicate in a mode-independent way what is required from a mac_config() implementation. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: phylink: allow ethtool -A to change flow control advertisementRussell King1-0/+18
When ethtool -A is used to change the pause modes, the pause advertisement is not being changed, but the documentation in uapi/linux/ethtool.h says we should be. Add that capability to phylink. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: phylink: resolve fixed link flow controlRussell King1-39/+31
Resolve the fixed link flow control using the recently introduced linkmode_resolve_pause() helper, which we use in phylink_get_fixed_state() only when operating in full duplex mode. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: phylink: use phylib resolved flow control modesRussell King1-8/+9
Use the new phy_get_pause() helper to get the resolved pause modes for a PHY rather than resolving the pause modes ourselves. We temporarily retain our pause mode resolution for causes where there is no PHY attached, e.g. for fixed-link modes. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: phylink: ensure manual flow control is selected appropriatelyRussell King1-17/+25
Split the application of manually controlled flow control modes from phylink_resolve_flow(), so that we can use alternative providers of flow control resolution. We also want to clear the MLO_PAUSE_AN flag when autoneg is disabled, since flow control can't be negotiated in this circumstance. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: phylink: remove pause mode ethtool setting for fixed linksRussell King1-12/+5
Remove the ability for ethtool -A to change the pause settings for fixed links; if this is really required, we can reinstate it later. Andrew Lunn agrees: "So I think it is safe to not implement ethtool -A, at least until somebody has a real use case for it." Lets avoid making things too complex for use cases that aren't being used. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: add linkmode helper for setting flow control advertisementRussell King2-16/+52
Add a linkmode helper to set the flow control advertisement in an ethtool linkmode mask according to the tx/rx capabilities. This implementation is moved from phylib, and documented with an analysis of its shortcomings. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: add helpers to resolve negotiated flow controlRussell King3-1/+72
Add a couple of helpers to resolve negotiated flow control. Two helpers are provided: - linkmode_resolve_pause() which takes the link partner and local advertisements, and decodes whether we should enable TX or RX pause at the MAC. This is useful outside of phylib, e.g. in phylink. - phy_get_pause(), which returns the TX/RX enablement status for the current negotiation results of the PHY. This allows us to centralise the flow control resolution, rather than spreading it around. Signed-off-by: Russell King <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-16net: phy: restore mdio regs in the iproc mdio driverArun Parameswaran1-0/+20
The mii management register in iproc mdio block does not have a retention register so it is lost on suspend. Save and restore value of register while resuming from suspend. Fixes: bb1a619735b4 ("net: phy: Initialize mdio clock at probe function") Signed-off-by: Arun Parameswaran <[email protected]> Signed-off-by: Scott Branden <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds2-0/+18
Pull networking fixes from David Miller: 1) Use after free in rxrpc_put_local(), from David Howells. 2) Fix 64-bit division error in mlxsw, from Nathan Chancellor. 3) Make sure we clear various bits of TCP state in response to tcp_disconnect(). From Eric Dumazet. 4) Fix netlink attribute policy in cls_rsvp, from Eric Dumazet. 5) txtimer must be deleted in stmmac suspend(), from Nicolin Chen. 6) Fix TC queue mapping in bnxt_en driver, from Michael Chan. 7) Various netdevsim fixes from Taehee Yoo (use of uninitialized data, snapshot panics, stack out of bounds, etc.) 8) cls_tcindex changes hash table size after allocating the table, fix from Cong Wang. 9) Fix regression in the enforcement of session ID uniqueness in l2tp. We only have to enforce uniqueness for IP based tunnels not UDP ones. From Ridge Kennedy. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (46 commits) gtp: use __GFP_NOWARN to avoid memalloc warning l2tp: Allow duplicate session creation with UDP r8152: Add MAC passthrough support to new device net_sched: fix an OOB access in cls_tcindex qed: Remove set but not used variable 'p_link' tc-testing: add missing 'nsPlugin' to basic.json tc-testing: fix eBPF tests failure on linux fresh clones net: hsr: fix possible NULL deref in hsr_handle_frame() netdevsim: remove unused sdev code netdevsim: use __GFP_NOWARN to avoid memalloc warning netdevsim: use IS_ERR instead of IS_ERR_OR_NULL for debugfs netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init() netdevsim: fix panic in nsim_dev_take_snapshot_write() netdevsim: disable devlink reload when resources are being used netdevsim: fix using uninitialized resources bnxt_en: Fix TC queue mapping. bnxt_en: Fix logic that disables Bus Master during firmware reset. bnxt_en: Fix RDMA driver failure with SRIOV after firmware reset. bnxt_en: Refactor logic to re-enable SRIOV after firmware reset detected. net: stmmac: Delete txtimer in suspend() ...
2020-02-03Merge tag 'clk-for-linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "There are a few changes to the core framework this time around, in addition to the normal collection of driver updates to support new SoCs, fix incorrect data, and convert various drivers to clk_hw based APIs. In the core, we allow clk_ops::init() to return an error code now so that we can fail clk registration if the callback does something like fail to allocate memory. We also add a new "terminate" clk_op so that things done in clk_ops::init() can be undone, e.g. free memory. We also spit out a warning now when critical clks fail to enable and we support changing clk rates and enable/disable state through debugfs when developers compile the kernel themselves. On the driver front, we get support for what seems like a lot of Qualcomm and NXP SoCs given that those vendors dominate the diffstat. There are a couple new drivers for Xilinx and Amlogic SoCs too. The updates are all small things like fixing the way glitch free muxes switch parents, avoiding div-by-zero problems, or fixing data like parent names. See the updates section below for more details. Finally, the "basic" clk types have been converted to support specifying parents with clk_hw pointers. This work includes an overhaul of the fixed-rate clk type to be more modern by using clk_hw APIs. Core: - Let clk_ops::init() return an error code - Add a clk_ops::terminate() callback to undo clk_ops::init() - Warn about critical clks that fail to enable or prepare - Support dangerous debugfs actions on clks with dead code New Drivers: - Support for Xilinx Versal platform clks - Display clk controller on qcom sc7180 - Video clk controller on qcom sc7180 - Graphics clk controller on qcom sc7180 - CPU PLLs for qcom msm8916 - Move qcom msm8974 gfx3d clk to RPM control - Display port clk support on qcom sdm845 SoCs - Global clk controller on qcom ipq6018 - Add a driver for BCLK of Freescale SAI cores - Add cam, vpe and sgx clock support for TI dra7 - Add aess clock support for TI omap5 - Enable clks for CPUfreq on Allwinner A64 SoCs - Add Amlogic meson8b DDR clock controller - Add input clocks to Amlogic meson8b controllers - Add SPIBSC (SPI FLASH) clock on Renesas RZ/A2 - i.MX8MP clk driver support Updates: - Convert gpio, fixed-factor, mux, gate, divider basic clks to hw based APIs - Detect more PRMCU variants in ux500 driver - Adjust the composite clk type to new way of describing clk parents - Fixes for clk controllers on qcom msm8998 SoCs - Fix gmac main clock for TI dra7 - Move TI dra7-atl clock header to correct location - Fix hidden node name dependency on TI clkctrl clocks - Fix Amlogic meson8b mali clock update using the glitch free mux - Fix Amlogic pll driver division by zero at init - Prepare for split of Renesas R-Car H3 ES1.x and ES2.0+ config symbols - Switch more i.MX clk drivers to clk_hw based APIs - Disable non-functional divider between pll4_audio_div and pll4_post_div on imx6q - Fix watchdog2 clock name typo in imx7ulp clock driver - Set CLK_GET_RATE_NOCACHE flag for DRAM related clocks on i.MX8M SoCs - Suppress bind attrs for i.MX8M clock driver - Add a big comment in imx8qxp-lpcg driver to tell why devm_platform_ioremap_resource() shouldn't be used for the driver - A correction on i.MX8MN usb1_ctrl parent clock setting" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (140 commits) dt/bindings: clk: fsl,plldig: Drop 'bindings' from schema id clk: ls1028a: Fix warning on clamp() usage clk: qoriq: add ls1088a hwaccel clocks support clk: ls1028a: Add clock driver for Display output interface dt/bindings: clk: Add YAML schemas for LS1028A Display Clock bindings clk: fsl-sai: new driver dt-bindings: clock: document the fsl-sai driver clk: composite: add _register_composite_pdata() variants clk: qcom: rpmh: Sort OF match table dt-bindings: fix warnings in validation of qcom,gcc.yaml dt-binding: fix compilation error of the example in qcom,gcc.yaml clk: zynqmp: Add support for clock with CLK_DIVIDER_POWER_OF_TWO flag clk: zynqmp: Fix divider calculation clk: zynqmp: Add support for get max divider clk: zynqmp: Warn user if clock user are more than allowed clk: zynqmp: Extend driver for versal dt-bindings: clock: Add bindings for versal clock driver clk: ti: clkctrl: Fix hidden dependency to node name clk: ti: add clkctrl data dra7 sgx clk: ti: omap5: Add missing AESS clock ...
2020-01-31net: phy: at803x: disable vddio regulatorMichael Walle1-0/+11
The probe() might enable a VDDIO regulator, which needs to be disabled again before calling regulator_put(). Add a remove() function. Fixes: 2f664823a470 ("net: phy: at803x: add device tree binding") Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-01-31net: mii_timestamper: fix static allocation by PHY driverMichael Walle1-0/+7
If phydev->mii_ts is set by the PHY driver, it will always be overwritten in of_mdiobus_register_phy(). Fix it. Also make sure, that the unregister() doesn't do anything if the mii_timestamper was provided by the PHY driver. Fixes: 1dca22b18421 ("net: mdio: of: Register discovered MII time stampers.") Signed-off-by: Michael Walle <[email protected]> Acked-by: Richard Cochran <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-01-28net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROCScott Branden1-0/+1
Add default MDIO_BCM_IPROC Kconfig setting such that it is default on for IPROC family of devices. Signed-off-by: Scott Branden <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-23net: phy: DP83822: Add support for additional DP83825 devicesDan Murphy2-3/+12
Add PHY IDs for the DP83825CS, DP83825CM and the DP83825S devices to the DP83822 driver. Signed-off-by: Dan Murphy <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-23phy: dp83826: Add phy IDs for DP83826N and 826NCDan Murphy2-2/+8
Add phy IDs to the DP83822 phy driver for the DP83826N and the DP83826NC devices. The register map and features are the same for basic enablement. Signed-off-by: Dan Murphy <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-21net: phy: add new version of phy_do_ioctlHeiner Kallweit1-3/+13
Add a new version of phy_do_ioctl that doesn't check whether net_device is running. It will typically be used if suitable drivers attach the PHY in probe already. Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-21net: phy: rename phy_do_ioctl to phy_do_ioctl_runningHeiner Kallweit1-3/+3
We just added phy_do_ioctl, but it turned out that we need another version of this function that doesn't check whether net_device is running. So rename phy_do_ioctl to phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-20net: phy: add generic ndo_do_ioctl handler phy_do_ioctlHeiner Kallweit1-0/+15
A number of network drivers has the same glue code to use phy_mii_ioctl as ndo_do_ioctl handler. So let's add such a generic ndo_do_ioctl handler to phylib. Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-20net: phylink: allow in-band AN for USXGMIIAlex Marginean1-0/+1
USXGMII supports passing link information in-band between PHY and MAC PCS, add it to the list of protocols that support in-band AN mode. Being a MAC-PHY protocol that can auto-negotiate link speeds up to 10 Gbps, we populate the initial supported mask with the entire spectrum of link modes up to 10G that PHYLINK supports, and we let the driver reduce that mask in its .phylink_validate method. Signed-off-by: Alex Marginean <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-20net: phy: don't crash in phy_read/_write_mmd without a PHY driverAlex Marginean1-2/+2
The APIs can be used by Ethernet drivers without actually loading a PHY driver. This may become more widespread in the future with 802.3z compatible MAC PCS devices being locally driven by the MAC driver when configuring for a PHY mode with in-band negotiation. Check that drv is not NULL before reading from it. Signed-off-by: Alex Marginean <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-20net: phylink: Allow 2.5BASE-T, 5GBASE-T and 10GBASE-T for the 10G link modesVladimir Oltean1-0/+4
For some reason, PHYLINK does not put the copper modes for 802.3bz (NBASE-T) and 802.3an-2006 (10GBASE-T) in the PHY's supported mask, when the PHY-MAC connection is a 10G-capable one (10GBase-KR, 10GBase-R, USXGMII). One possible way through which the cable side can work at the lower speed is by having the PHY emit PAUSE frames towards the MAC. So fix that omission. Also include the 2500Base-X fiber mode in this list while we're at it. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-5/+11
2020-01-19net: phy: adin: fix a warning about msleepDejin Zheng1-1/+1
found a warning by the following command: ./scripts/checkpatch.pl -f drivers/net/phy/adin.c WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.rst #628: FILE: drivers/net/phy/adin.c:628: + msleep(10); Signed-off-by: Dejin Zheng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17net: phy: adin: const-ify static dataAlexandru Ardelean1-5/+5
Some bits of static data should have been made const from the start. This change adds the const qualifier where appropriate. Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Alexandru Ardelean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17net: phy: dp83867: Set FORCE_LINK_GOOD to default after resetMichael Grzeschik1-1/+7
According to the Datasheet this bit should be 0 (Normal operation) in default. With the FORCE_LINK_GOOD bit set, it is not possible to get a link. This patch sets FORCE_LINK_GOOD to the default value after resetting the phy. Signed-off-by: Michael Grzeschik <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17net: phy: Maintain MDIO device and bus statisticsFlorian Fainelli1-2/+249
We maintain global statistics for an entire MDIO bus, as well as broken down, per MDIO bus address statistics. Given that it is possible for MDIO devices such as switches to access MDIO bus addresses for which there is not a mdio_device instance created (therefore not a a corresponding device directory in sysfs either), we also maintain per-address statistics under the statistics folder. The layout looks like this: /sys/class/mdio_bus/../statistics/ transfers errrors writes reads transfers_<addr> errors_<addr> writes_<addr> reads_<addr> When a mdio_device instance is registered, a statistics/ folder is created with the tranfers, errors, writes and reads attributes which point to the appropriate MDIO bus statistics structure. Statistics are 64-bit unsigned quantities and maintained through the u64_stats_sync.h helper functions. Signed-off-by: Florian Fainelli <[email protected]> Tested-by: Andrew Lunn <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-14net: phy: mscc: PN rollover supportAntoine Tenart2-1/+61
This patch adds support for handling MACsec PN rollover in the mscc PHY driver. When a flow rolls over, an interrupt is fired. This patch adds the logic to check all flows and identify the one rolling over in the handle_interrupt PHY helper, then disables the flow and report the event to the MACsec core. Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.