aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2013-07-13Merge tag 'rdma-for-linus' of ↵Linus Torvalds22-0/+5773
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - AF_IB (native IB addressing) for CMA from Sean Hefty - new mlx5 driver for Mellanox Connect-IB adapters (including post merge request fixes) - SRP fixes from Bart Van Assche (including fix to first merge request) - qib HW driver updates - resurrection of ocrdma HW driver development - uverbs conversion to create fds with O_CLOEXEC set - other small changes and fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits) mlx5: Return -EFAULT instead of -EPERM IB/qib: Log all SDMA errors unconditionally IB/qib: Fix module-level leak mlx5_core: Adjust hca_cap.uar_page_sz to conform to Connect-IB spec IB/srp: Let srp_abort() return FAST_IO_FAIL if TL offline IB/uverbs: Use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd() mlx5_core: Fixes for sparse warnings IB/mlx5: Make profile[] static in main.c mlx5: Fix parameter type of health_handler_t mlx5: Add driver for Mellanox Connect-IB adapters IB/core: Add reserved values to enums for low-level driver use IB/srp: Bump driver version and release date IB/srp: Make HCA completion vector configurable IB/srp: Maintain a single connection per I_T nexus IB/srp: Fail I/O fast if target offline IB/srp: Skip host settle delay IB/srp: Avoid skipping srp_reset_host() after a transport error IB/srp: Fix remove_one crash due to resource exhaustion IB/qib: New transmitter tunning settings for Dell 1.1 backplane IB/core: Fix error return code in add_port() ...
2013-07-12via-rhine: fix dma mapping errorsNeil Horman1-1/+16
this bug: https://bugzilla.redhat.com/show_bug.cgi?id=951695 Reported a dma debug backtrace: WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930() Hardware name: To Be Filled By O.E.M. via-rhine 0000:00:12.0: DMA-API: device driver failed to check map error[device address=0x0000000075a837b2] [size=90 bytes] [mapped as single] Modules linked in: ip6_tables gspca_spca561 gspca_main videodev media snd_hda_codec_realtek snd_hda_intel i2c_viapro snd_hda_codec snd_hwdep snd_seq ppdev mperf via_rhine coretemp snd_pcm mii microcode snd_page_alloc snd_timer snd_mpu401 snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore parport_pc parport shpchp ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm pata_via sata_via i2c_core uinput Pid: 295, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.1.fc20.x86_64 #1 Call Trace: <IRQ> [<ffffffff81068dd0>] warn_slowpath_common+0x70/0xa0 [<ffffffff81068e4c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8137ec6d>] check_unmap+0x47d/0x930 [<ffffffff810ace9f>] ? local_clock+0x5f/0x70 [<ffffffff8137f17f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffffa0225edc>] ? rhine_ack_events.isra.14+0x3c/0x50 [via_rhine] [<ffffffffa02275f8>] rhine_napipoll+0x1d8/0xd80 [via_rhine] [<ffffffff815d3d51>] ? net_rx_action+0xa1/0x380 [<ffffffff815d3e22>] net_rx_action+0x172/0x380 [<ffffffff8107345f>] __do_softirq+0xff/0x400 [<ffffffff81073925>] irq_exit+0xb5/0xc0 [<ffffffff81724cd6>] do_IRQ+0x56/0xc0 [<ffffffff81719ff2>] common_interrupt+0x72/0x72 <EOI> [<ffffffff8170ff57>] ? __slab_alloc+0x4c2/0x526 [<ffffffff811992e0>] ? mmap_region+0x2b0/0x5a0 [<ffffffff810d5807>] ? __lock_is_held+0x57/0x80 [<ffffffff811992e0>] ? mmap_region+0x2b0/0x5a0 [<ffffffff811bf1bf>] kmem_cache_alloc+0x2df/0x360 [<ffffffff811992e0>] mmap_region+0x2b0/0x5a0 [<ffffffff811998e6>] do_mmap_pgoff+0x316/0x3d0 [<ffffffff81183ca0>] vm_mmap_pgoff+0x90/0xc0 [<ffffffff81197d6c>] sys_mmap_pgoff+0x4c/0x190 [<ffffffff81367d7e>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8101eb42>] sys_mmap+0x22/0x30 [<ffffffff81722fd9>] system_call_fastpath+0x16/0x1b Usual problem with the usual fix, add the appropriate calls to dma_mapping_error where appropriate Untested, as I don't have hardware, but its pretty straightforward Signed-off-by: Neil Horman <[email protected]> CC: David S. Miller <[email protected]> CC: Roger Luethi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-12atl1e: fix dma mapping warningsNeil Horman1-3/+25
Recently had this backtrace reported: WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930() Hardware name: System Product Name ATL1E 0000:02:00.0: DMA-API: device driver failed to check map error[device address=0x00000000cbfd1000] [size=90 bytes] [mapped as single] Modules linked in: xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek iTCO_wdt iTCO_vendor_support snd_hda_intel acpi_cpufreq mperf coretemp btrfs zlib_deflate snd_hda_codec snd_hwdep microcode raid6_pq libcrc32c snd_seq usblp serio_raw xor snd_seq_device joydev snd_pcm snd_page_alloc snd_timer snd lpc_ich i2c_i801 soundcore mfd_core atl1e asus_atk0110 ata_generic pata_acpi radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core pata_marvell uinput Pid: 314, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.3.fc19.x86_64 #1 Call Trace: <IRQ> [<ffffffff81069106>] warn_slowpath_common+0x66/0x80 [<ffffffff8106916c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8138151d>] check_unmap+0x47d/0x930 [<ffffffff810ad048>] ? sched_clock_cpu+0xa8/0x100 [<ffffffff81381a2f>] debug_dma_unmap_page+0x5f/0x70 [<ffffffff8137ce30>] ? unmap_single+0x20/0x30 [<ffffffffa01569a1>] atl1e_intr+0x3a1/0x5b0 [atl1e] [<ffffffff810d53fd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff81119636>] handle_irq_event_percpu+0x56/0x390 [<ffffffff811199ad>] handle_irq_event+0x3d/0x60 [<ffffffff8111cb6a>] handle_fasteoi_irq+0x5a/0x100 [<ffffffff8101c36f>] handle_irq+0xbf/0x150 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50 [<ffffffff81073b10>] ? irq_enter+0x50/0xa0 [<ffffffff8172738d>] do_IRQ+0x4d/0xc0 [<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50 [<ffffffff8171c6b2>] common_interrupt+0x72/0x72 <EOI> [<ffffffff810db5b2>] ? lock_release+0xc2/0x310 [<ffffffff8109ea04>] lg_local_unlock_cpu+0x24/0x50 [<ffffffff811dcb2f>] file_sb_list_del+0x3f/0x50 [<ffffffff811dcb6d>] fput+0x2d/0xc0 [<ffffffff811d8ea1>] filp_close+0x61/0x90 [<ffffffff811fae4d>] __close_fd+0x8d/0x150 [<ffffffff811d8ef0>] sys_close+0x20/0x50 [<ffffffff81725699>] system_call_fastpath+0x16/0x1b The usual straighforward failure to check for dma_mapping_error after a map operation is completed. This patch should fix it, the reporter wandered off after filing this bz: https://bugzilla.redhat.com/show_bug.cgi?id=954170 and I don't have hardware to test, but the fix is pretty straightforward, so I figured I'd post it for review. Signed-off-by: Neil Horman <[email protected]> CC: Jay Cliburn <[email protected]> CC: Chris Snook <[email protected]> CC: "David S. Miller" <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-11drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in ↵Wolfram Sang1-11/+0
probe Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <[email protected]> (personally at LCE13) Signed-off-by: Wolfram Sang <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-11mlx5: Return -EFAULT instead of -EPERMDan Carpenter2-13/+9
For copy_to/from_user() failure, the correct error code is -EFAULT not -EPERM. Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Or Gerlitz <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2013-07-11mlx5_core: Adjust hca_cap.uar_page_sz to conform to Connect-IB specMoshe Lazer1-1/+1
Sparse reported an endianness bug in the assignment to hca_cap.uar_page_sz. Fix the declaration of this field to be __be16 (which is what is in the firmware spec), renaming the field to log_uar_pg_size to conform to the spec, which fixes the endianness bug reported by sparse. Reported-by: Fengguang Wu <[email protected]> Signed-off-by: Moshe Lazer <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2013-07-11bnx2x: fix tunneling CSUM calculationDmitry Kravkov1-3/+3
Since commit c957d09ffda417f6c8e3d1f10e2b05228607d6d7 "bnx2x: Remove sparse and coccinelle warnings" driver provided wrong partial csum for HW in tunneing scenarios. Reported-by: Eric Dumazet <[email protected]> CC: Alexander Duyck <[email protected]> CC: Pravin Shelar <[email protected]> CC: Cong Wang <[email protected]> Signed-off-by: Dmitry Kravkov <[email protected]> Tested-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-11alx: fix lockdep annotationMaarten Lankhorst1-3/+2
Move spin_lock_init to be called before the spinlocks are used, preventing a lockdep splat. Signed-off-by: Maarten Lankhorst <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-10sh_eth: SH_ETH should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: drivers/built-in.o: In function `sh_eth_free_dma_buffer': drivers/net/ethernet/renesas/sh_eth.c:1103: undefined reference to `dma_free_coherent' drivers/net/ethernet/renesas/sh_eth.c:1110: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `sh_eth_ring_init': drivers/net/ethernet/renesas/sh_eth.c:1065: undefined reference to `dma_alloc_coherent' drivers/net/ethernet/renesas/sh_eth.c:1086: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `sh_eth_ring_format': drivers/net/ethernet/renesas/sh_eth.c:988: undefined reference to `dma_map_single' drivers/built-in.o: In function `sh_eth_txfree': drivers/net/ethernet/renesas/sh_eth.c:1220: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `sh_eth_rx': drivers/net/ethernet/renesas/sh_eth.c:1323: undefined reference to `dma_map_single' drivers/built-in.o: In function `sh_eth_start_xmit': drivers/net/ethernet/renesas/sh_eth.c:1954: undefined reference to `dma_map_single' Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-10r8169: add a new chip for RTL8411hayeswang1-0/+67
Add a new chip for RTL8411 series. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-10net: rename ll methods to busy-pollEliezer Tamir5-6/+6
Rename ndo_ll_poll to ndo_busy_poll. Rename sk_mark_ll to sk_mark_napi_id. Rename skb_mark_ll to skb_mark_napi_id. Correct all useres of these functions. Update comments and defines in include/net/busy_poll.h Signed-off-by: Eliezer Tamir <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-10net: rename include/net/ll_poll.h to include/net/busy_poll.hEliezer Tamir4-4/+4
Rename the file and correct all the places where it is included. Signed-off-by: Eliezer Tamir <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-10sunvnet: vnet_port_remove must call unregister_netdevDave Kleikamp1-0/+2
The missing call to unregister_netdev() leaves the interface active after the driver is unloaded by rmmod. Signed-off-by: Dave Kleikamp <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds274-4237/+10464
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct [email protected] net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-07-09drivers/net: enic: release rtnl_lock on error-pathKonstantin Khlebnikov1-0/+2
enic_change_mtu_work() must call rtnl_unlock() on all exiting paths. Signed-off-by: Konstantin Khlebnikov <[email protected]> Cc: Christian Benvenuti <[email protected]> Cc: Roopa Prabhu <[email protected]> Cc: Neel Patel <[email protected]> Cc: Nishank Trivedi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-09net: mv643xx_eth: do not use port number as platform device idJonas Gorski1-2/+11
The port number is only local to the ethernet block, not global, so there can be two ethernet blocks both using the same port, like kirkwood with both using port 0. Fix this by using the array index offset for the allocated platform devices as the id. Signed-off-by: Jonas Gorski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-09net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bitJongsung Kim1-1/+1
Signed-off-by: Jongsung Kim <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-08mlx5_core: Fixes for sparse warningsRoland Dreier2-11/+21
- use be32_to_cpu() instead of cpu_to_be32() where appropriate. - use proper accessors for pointers marked __iomem. Signed-off-by: Roland Dreier <[email protected]>
2013-07-08mlx5: Add driver for Mellanox Connect-IB adaptersEli Cohen22-0/+5767
The driver is comprised of two kernel modules: mlx5_ib and mlx5_core. This partitioning resembles what we have for mlx4, except that mlx5_ib is the pci device driver and not mlx5_core. mlx5_core is essentially a library that provides general functionality that is intended to be used by other Mellanox devices that will be introduced in the future. mlx5_ib has a similar role as any hardware device under drivers/infiniband/hw. Signed-off-by: Eli Cohen <[email protected]> Signed-off-by: Jack Morgenstein <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> [ Merge in coccinelle fixes from Fengguang Wu <[email protected]>. - Roland ] Signed-off-by: Roland Dreier <[email protected]>
2013-07-05sfc: Fix memory leak when discarding scattered packetsBen Hutchings1-7/+20
Commit 2768935a4660 ('sfc: reuse pages to avoid DMA mapping/unmapping costs') did not fully take account of DMA scattering which was introduced immediately before. If a received packet is invalid and must be discarded, we only drop a reference to the first buffer's page, but we need to drop a reference for each buffer the packet used. I think this bug was missed partly because efx_recycle_rx_buffers() was not renamed and so no longer does what its name says. It does not change the state of buffers, but only prepares the underlying pages for recycling. Rename it accordingly. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-04Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-5/+3
Pull device tree updates from Grant Likely: "This branch contains the following changes: - Removal of CONFIG_OF_DEVICE, it is always enabled by CONFIG_OF - Remove #ifdef from linux/of_platform.h to increase compiler syntax coverage - Bug fix for address decoding on Bimini and js2x powerpc platforms. - miscellaneous binding changes One note on the above. The binding changes going in from all kinds of different trees has gotten rather out of hand. I picked up some during this cycle, but even going though my tree isn't a great fit. Ian Campbell has prototyped splitting the bindings and .dtb files into a separate repository. The plan is to migrate to using that sometime in the next few kernel releases which should get rid of a lot of the churn on binding docs and .dts files" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: of: Fix address decoding on Bimini and js2x machines of: remove CONFIG_OF_DEVICE usb: chipidea: depend on CONFIG_OF instead of CONFIG_OF_DEVICE of: remove of_platform_driver ibmebus: convert of_platform_driver to platform_driver driver core: move to_platform_driver to platform_device.h mfd: DT bindings for the palmas family MFD ARM: dts: omap3-devkit8000: fix NAND memory binding of/base: fix typos of: remove #ifdef from linux/of_platform.h
2013-07-04dt:net:stmmac: Add dt specific phy reset callback support.Srinivas Kandagatla1-2/+46
This patch adds phy reset callback support for stmmac driver via device trees. It adds three new properties to gmac device tree bindings to define the reset signal via gpio. With this patch users can conveniently pass reset gpio number with pre, pulse and post delay in micro secs via DTs. active low: _________ ____________ <pre-delay> |<pulse-delay> |<post-delay> | | |_______________| active high: ________________ <pre-delay> |<pulse-delay> |<post-delay> | | ________| |___________ Signed-off-by: Srinivas Kandagatla <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-04dt:net:stmmac: Add support to dwmac version 3.610 and 3.710Srinivas Kandagatla1-0/+26
This patch adds dt support to dwmac version 3.610 and 3.710 these versions are integrated in STiH415 and STiH416 ARM A9 SOCs. To support these IP version, some of the device tree properties are extended. Signed-off-by: Srinivas Kandagatla <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-04dt:net:stmmac: Allocate platform data only if its NULL.Srinivas Kandagatla1-3/+3
In some DT use-cases platform data might be already allocated and passed via AUXDATA. These are the cases where machine level code populates few callbacks in the platform data. This patch adds check and reuses platform_data if its valid, before allocating a new one. Signed-off-by: Srinivas Kandagatla <[email protected]> Acked-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-04net:stmmac: fix memleak in the open methodGiuseppe CAVALLARO1-10/+10
This patch is to fix a memory leak in the open method, it reviews error conditions freeing the resources previously allocated and not freed in cased of DMA failure. Signed-off-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds4-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-07-03net/mlx4: fix small memory leak on errorDan Carpenter1-0/+1
"work" needs to be freed before returning on this error path. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-03net: fec: Add VLAN receive HW support.Jim Baxter2-10/+55
This enables the driver to take advantage of the FEC VLAN indicator to improve performance. Signed-off-by: Jim Baxter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-03alx: remove WoL supportJohannes Berg4-323/+15
Unfortunately, WoL is broken and the system will immediately resume after suspending, and I can't seem to figure out why. Remove WoL support until the issue can be found. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller14-72/+143
Conflicts: drivers/net/ethernet/freescale/fec_main.c drivers/net/ethernet/renesas/sh_eth.c net/ipv4/gre.c The GRE conflict is between a bug fix (kfree_skb --> kfree_skb_list) and the splitting of the gre.c code into seperate files. The FEC conflict was two sets of changes adding ethtool support code in an "!CONFIG_M5272" CPP protected block. Finally the sh_eth.c conflict was between one commit add bits set in the .eesr_err_check mask whilst another commit removed the .tx_error_check member and assignments. Signed-off-by: David S. Miller <[email protected]>
2013-07-03Merge tag 'pinctrl-for-v3.11-1' of ↵Linus Torvalds2-0/+21
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
2013-07-03Merge branch 'for-linus' of ↵Linus Torvalds1-21/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull second set of VFS changes from Al Viro: "Assorted f_pos race fixes, making do_splice_direct() safe to call with i_mutex on parent, O_TMPFILE support, Jeff's locks.c series, ->d_hash/->d_compare calling conventions changes from Linus, misc stuff all over the place." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) Document ->tmpfile() ext4: ->tmpfile() support vfs: export lseek_execute() to modules lseek_execute() doesn't need an inode passed to it block_dev: switch to fixed_size_llseek() cpqphp_sysfs: switch to fixed_size_llseek() tile-srom: switch to fixed_size_llseek() proc_powerpc: switch to fixed_size_llseek() ubi/cdev: switch to fixed_size_llseek() pci/proc: switch to fixed_size_llseek() isapnp: switch to fixed_size_llseek() lpfc: switch to fixed_size_llseek() locks: give the blocked_hash its own spinlock locks: add a new "lm_owner_key" lock operation locks: turn the blocked_list into a hashtable locks: convert fl_link to a hlist_node locks: avoid taking global lock if possible when waking up blocked waiters locks: protect most of the file_lock handling with i_lock locks: encapsulate the fl_link list handling locks: make "added" in __posix_lock_file a bool ...
2013-07-02stmmac: dity-up and rework the driver debug levelsGiuseppe CAVALLARO9-267/+117
Prior this patch, the internal debugging was based on ifdef and also some printk were useless because many info are exposed via ethtool. This patch remove all the ifdef defines and now we only use netif_msg_XXX levels. Signed-off-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-02net: fec: Fix RMON registers on imx6Jim Baxter1-5/+2
commit 38ae92d "fec: Add support for reading RMON registers" causes the imx6Q to crash. This fixes it by only enabling the RMON registers, the registers are already cleared by the MAC being reset. Signed-off-by: Jim Baxter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-02cxgb3: Missing rtnl lock in error recoveryBenjamin Herrenschmidt1-0/+2
When exercising error injection on IBM pseries machine, I hit the following warning: [ 251.450043] RTAS: event: 89, Type: Platform Error, Severity: 2 [ 253.549822] cxgb3 0006:01:00.0: enabling device (0140 -> 0142) [ 253.713560] cxgb3 0006:01:00.0: adapter recovering, PEX ERR 0x100 [ 254.895437] RTNL: assertion failed at net/core/dev.c (2031) [ 254.895467] CPU: 6 PID: 5449 Comm: eehd Tainted: G W 3.10.0-rc7-00157-gea461ab #19 [ 254.895474] Call Trace: [ 254.895483] [c000000fac56f7d0] [c000000000014dcc] .show_stack+0x7c/0x1f0 (unreliable) [ 254.895493] [c000000fac56f8a0] [c0000000007ba318] .dump_stack+0x28/0x3c [ 254.895500] [c000000fac56f910] [c0000000006c0384] .netif_set_real_num_tx_queues+0x224/0x230 [ 254.895515] [c000000fac56f9b0] [d00000000ef35510] .cxgb_open+0x80/0x3f0 [cxgb3] [ 254.895525] [c000000fac56fa50] [d00000000ef35914] .t3_resume_ports+0x94/0x100 [cxgb3] [ 254.895533] [c000000fac56fae0] [c00000000005fc8c] .eeh_report_resume+0x8c/0xd0 [ 254.895539] [c000000fac56fb60] [c00000000005e9fc] .eeh_pe_dev_traverse+0x9c/0x190 [ 254.895545] [c000000fac56fc10] [c000000000060000] .eeh_handle_event+0x110/0x330 [ 254.895551] [c000000fac56fca0] [c000000000060350] .eeh_event_handler+0x130/0x1a0 [ 254.895558] [c000000fac56fd30] [c0000000000ad758] .kthread+0xe8/0xf0 [ 254.895566] [c000000fac56fe30] [c00000000000a05c] .ret_from_kernel_thread+0x5c/0x80 It appears that t3_resume_ports() is called with the rtnl_lock held from the fatal error task but not from the PCI error callbacks. This fixes it. Signed-off-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-02net: fec: Fix Transmitted bytes counterJim Baxter1-0/+1
The tx_bytes field was not being updated so the network card statistics showed 0.0B transmitted. Signed-off-by: Jim Baxter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-02net: ethernet: davinci_emac: remove redundant dev_err call in ↵Wei Yongjun1-1/+0
davinci_emac_probe() There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <[email protected]> Acked-by: Lad, Prabhakar <[email protected]> Acked-by: Mugunthan V N <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-02bnx2x: fill in sane dump flag informationMichal Schmidt1-2/+2
bnx2x did not set dump->version in its .get_dump_flag() method. Let's set it to BNX2X_DUMP_VERSION. It's not a particularly nice number (0x50acff01 currently), but at least it's something deterministic. dump->flag should report the value previously set using ethtool -W. Signed-off-by: Michal Schmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-02bnx2x: fix dump flag handlingMichal Schmidt2-0/+5
bnx2x interprets the dump flag as an index of a register preset. It is important to validate the index to avoid out of bounds memory accesses. Signed-off-by: Michal Schmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-02bnx2x: remove zeroing of dump data bufferMichal Schmidt1-2/+0
There is no need to initialize the dump data with zeros. data is allocated with vzalloc, so it's already zero-filled. More importantly, the memset is harmful, because dump->len (the length requested by userspace) can be bigger than the allocated buffer (whose size is determined by asking the driver's .get_dump_flag method). Signed-off-by: Michal Schmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01cassini: Make missing firmware non-fatalBen Hutchings1-10/+8
The firmware patch for the Saturn PHY fixes a bug, but is not absolutely essential. And its licence is unclear, so it is not included in all distributions. Just log an error message and continue if it is missing or invalid. References: http://bugs.debian.org/712674 Signed-off-by: Ben Hutchings <[email protected]> Tested-by: Jose Andres Arias Velichko <[email protected]> (against 3.2) Signed-off-by: David S. Miller <[email protected]>
2013-07-01net: stmmac: fixed enh_desc set always zeroByungho An1-3/+3
This patch fixed that enh_desc value is always zero. Due to calling order of stmmac_selec_desc_mode(), enh_desc value is always zero. Even though mac is set to use enhanced dma descriptor, if enh_desc is zero, functions related dma descriptor are not working correctly. Signed-off-by: Byungho An <[email protected]> Acked-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01net: stmmac: fixed operator typoByungho An1-5/+5
This patch fixed operator typo from & to ==. Due to incorrect operator, the result is incorrect. Signed-off-by: Byungho An <[email protected]> Acked-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01net: fec: Fix multicast list setup in fec_restart().Christoph Müllner1-3/+4
Setup the multicast list of the net_device instead of clearing it blindly. This restores the multicast groups in case of a link down/up event or when resuming from suspend. Signed-off-by: Christoph Muellner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01alx: fix ethtool support codeJohannes Berg1-35/+29
A number of places treated features wrongly, listing not-supported features instead of supported ones. Also, the get_drvinfo ethtool callback isn't needed, and alx_get_pauseparam can be simplified. Reported-by: Ben Hutchings <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01alx: fix MAC address alignment problemJohannes Berg1-4/+4
In two places, parts of MAC addresses are used as u32/u16 values. This can cause alignment problems, use put_unaligned and get_unaligned to fix this. Reported-by: Ben Hutchings <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01alx: separate link speed/duplex fieldsJohannes Berg4-125/+106
As suggested by Ben Hutchings, use separate fields to track current link speed and duplex setting. Reported-by: Ben Hutchings <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01alx: make sizes unsignedJohannes Berg1-4/+4
The ring sizes should be unsigned, pointed out by Ben Hutchings. Reported-by: Ben Hutchings <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01alx: remove NET_CORE Kconfig selectJohannes Berg1-1/+0
That select doesn't make any sense, remove it. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-07-01alx: fix 100mbit/half duplex speed translationJohannes Berg1-1/+1
100mbit half duplex is ADVERTISED_100baseT_Half, not ADVERTISED_10baseT_Half. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.