aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2012-02-16sfc: Add support for TX MAC filtersBen Hutchings2-5/+72
On Siena each TX queue can be configured to send only packets for which there is a TX MAC filter that matches the source MAC address, queue ID, and optionally VID. This will be used to implement the 'spoofchk' feature for SR-IOV virtual functions. Signed-off-by: Ben Hutchings <[email protected]>
2012-02-16sfc: Add support for configuring RX unicast/multicast default filtersBen Hutchings3-47/+214
On Siena all received packets that don't match a more specific filter will match the unicast or multicast default filter. Currently we leave these set to the default values (RSS with base queue number of 0). Allow them to be reconfigured to select a single RX queue. These default filters are programmed through the FILTER_CTL register, but we represent them internally as an additional table of size 2. Signed-off-by: Ben Hutchings <[email protected]>
2012-02-15cxgb3: update firmware versionDivy Le Ray1-2/+2
Hi Dave, This patch is sent in conjunction with the cxgb3 firmware update submission on linux-firmware. (https://lkml.org/lkml/2012/2/13/27) Cheers, Divy From: Divy Le Ray <[email protected]> This patch updates the firmware version cxgb3 is requesting to 7.12.0. Signed-off-by: Divy Le Ray <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15net/ethernet: ks8851_mll fix irq handlingJan Weitzel1-8/+6
There a two different irq variables ks->irq and netdev->irq. Only ks->irq is set on probe, so disabling irq in ks_start_xmit fails. This patches remove ks->irq from private data and use only netdev->irq. Tested on a kernel 3.0 based OMAP4430 SMP Board Signed-off-by: Jan Weitzel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15renesas/sh_eth.c: fix linux/interrupt.h included twiceDanny Kukawka1-1/+0
Remove double include of linux/interrupt.h. Signed-off-by: Danny Kukawka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15net: use eth_hw_addr_random() and reset addr_assign_typeDanny Kukawka11-9/+19
Use eth_hw_addr_random() instead of calling random_ether_addr() to set addr_assign_type correctly to NET_ADDR_RANDOM. Reset the state to NET_ADDR_PERM as soon as the MAC get changed via .ndo_set_mac_address. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka14-16/+15
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: allow all functions to display the phy FW versionMintz Yuval3-12/+6
The phy FW version is stored in regular memory, no MDC-MDIO access or any special locks are required to read it in the current implementation. Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: removed code re-checking memory base after device openMintz Yuval1-11/+0
Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: allow BCM84833 phy to advertise 100Base-T speedsMintz Yuval1-0/+5
Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: notify cnic of address of info-to-the-mcpMintz Yuval1-0/+5
Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: allocate smaller Rx rings for 1G functionsMintz Yuval1-0/+7
Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: allocate memory dynamically in ethtool self-test.Mintz Yuval1-2/+11
From: Merav Sicron <[email protected]> Current ethtool self tests usesa large buffer on stack. This patch replaces that array by dynamically allocated memory Signed-off-by: Merav Sicron <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: force 10G on 84833 phy should be autoneg with only 10G advertisedMintz Yuval1-8/+1
From: Yaniv Rosner <[email protected]> Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: added autoneg-restart after link advertisement changesMintz Yuval1-1/+1
From: Yaniv Rosner <[email protected]> Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: ethtool publishes link partners speed and FCMintz Yuval3-79/+272
Following the changes in the ethtool source code, this patch enables the bnx2x driver to publish the Link partner's capabilities s, when ethtool is used on an interface which completed autoneg. Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: half duplex support added for several boardsMintz Yuval2-0/+4
From: Yaniv Rosner <[email protected]> Several boards require an additional HW bit written in-order to enable half duplex. Signed-off-by: Yaniv Rosner <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15bnx2x: consistent statistics after internal driver reloadMintz Yuval6-236/+374
Currently bnx2x statistics are reset by inner driver reload, e.g. by MTU change. This patch fixes this issue - from now on statistics should only be reset upon device closure. Thanks to Michal Schmidt <[email protected]> for his initial patch regarding this issue. Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15stmmac: update the driver version to Feb 2012 (v2)Giuseppe CAVALLARO1-1/+1
Signed-off-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15stmmac: move hw init in the probe (v2)Giuseppe CAVALLARO4-116/+105
This patch moves the MAC HW initialization and the HW feature verification from the open to the probe function as D. Miller suggested. So the patch actually reorganizes and tidies-up some parts of the driver and indeed fixes some problem when tune its HW features. These can be overwritten by looking at the HW cap register at run-time and that generated problems. Signed-off-by: Giuseppe Cavallaro <[email protected]> Reviewed-by: Francesco Virlinzi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15stmmac: request_irq when use an ext wake irq line (v2)Francesco Virlinzi1-0/+16
In case of we use an external Wake-Up IRQ line (priv->wol_irq != dev->irq) we need to invoke the request_irq. Signed-off-by: Francesco Virlinzi <[email protected]> Signed-off-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15stmmac: do not discard frame on dribbling bit assertGiuseppe CAVALLARO4-3/+9
If this bit is set and the CRC error is reset, then the packet is valid. Only report this as stat info. Signed-off-by: Giuseppe Cavallaro <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15mlx4: add unicast steering entries to resource_trackerEugenia Emantayev1-7/+11
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15mlx4: fix QP tree trashingEugenia Emantayev1-0/+1
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-15mlx4: fix buffer overrunEugenia Emantayev1-1/+1
When passing MLX4_UC_STEER=1 it was translated to value 2 after mlx4_QP_ATTACH_wrapper. Therefore in new_steering_entry() unicast steer entries were added to index 2 of array of size 2. Fixing this bug by shift right to one position. Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-143c59x: shorten timer period for slave devicesEric Dumazet1-1/+1
Jean Delvare reported bonding on top of 3c59x adapters was not detecting network cable removal fast enough. 3c59x indeed uses a 60 seconds timer to check link status if carrier is on, and 5 seconds if carrier is off. This patch reduces timer period to 5 seconds if device is a bonding slave. Reported-by: Jean Delvare <[email protected]> Acked-by: Jean Delvare <[email protected]> Acked-by: Steffen Klassert <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-14bnx2x: remove the 'poll' module optionMichal Schmidt1-16/+1
'poll' was a debugging option, but turning it on these days leads to kernel panic. Remove it. Signed-off-by: Michal Schmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-14mlx4: add unicast steering entries to resource_trackerEugenia Emantayev1-7/+11
Add unicast steering entries to resource tracker. Do qp_detach also for these entries when VF doesn't shut down gracefully. Otherwise there is leakage of these resources, since they are not tracked. Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-14mlx4: attach multicast with correct flagEugenia Emantayev1-12/+4
mlx4_multicast_attach/detach() should use always MLX4_MC_STEER flag Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-14mlx4: remove redundant adding of steering type to gidEugenia Emantayev1-2/+0
mlx4_uc_steer_add/release() should not add MLX4_UC_STEER flag to gid. It is added in mlx4_unicast_attach/detach(). Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-14mlx4: remove unnecessary variables and argumentsEugenia Emantayev1-12/+10
mlx4_qp_attach/detach_common() don't use hash variable, move it to find_entry() static find_entry() in mcg.c doesn't use steer argument Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-14mlx4: remove unused field high_priosEugenia Emantayev2-4/+1
Remove unnecessary field high_prios from mlx4_steer struct and initialization Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-14mlx4: fix QP tree trashingEugenia Emantayev1-0/+1
When adding new unicast steer entry, before moving qp to state ready, actually before calling mlx4_RST2INIT_QP_wrapper(), there were added a lot of entries with local_qpn=0 into radix tree. This fact impacted the get_res() function and proper functioning of resource tracker in addition to adding trash entries into radix tree. Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-14mlx4_core: fix buffer overrunEugenia Emantayev1-1/+1
When passing MLX4_UC_STEER=1 it was translated to value 2 after mlx4_QP_ATTACH_wrapper. Therefore in new_steering_entry() unicast steer entries were added to index 2 of array of size 2. Fixing this bug by shift right to one position. Signed-off-by: Eugenia Emantayev <[email protected]> Reviewed-by: Yevgeny Petrilin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Update copyrightMatt Carlson2-2/+2
This patch updates the copyright dates in the tg3 driver. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Use *_UNKNOWN ethtool definitionsMatt Carlson2-23/+20
This patch replaces tg3's private SPEED_INVALID and DUPLEX_INVALID definitions with SPEED_UNKNOWN and DUPLEX_UNKNOWN respectively. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Remove unneeded link_config.orig_... membersMatt Carlson2-35/+12
This patch removes the unneeded link_config.orig_* members. When the phy is in a low power state, the TG3_PHYFLG_IS_LOW_POWER flag solely determines how the link is configured. When the phy is powered back up, it can resume using the original settings. For the phylib case, the link configuration still needs to be saved, but since the phylib maintains its own configuration, we can repurpose the (unused in this case) tg3 link configuration members. Signed-off-by: Matt Carlson <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Remove unused link config codeMatt Carlson1-5/+1
When tg3 devices are shutdown, the driver uses the TG3_PHYFLG_IS_LOW_POWER flag to enable a static phy configuration. Any attempt to use the link configuration variables is dead code. This patch removes such code. Signed-off-by: Matt Carlson <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Consolidate ASIC rev detection codeMatt Carlson1-80/+79
Detecting the ASIC revision of a device is getting to be an increasingly complex process. This patch consolidates all the ASIC rev detection code to a single routine for better maintainability. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Reduce UMP event collision windowMatt Carlson1-16/+26
The tg3 driver needs to submit a few phy register values to the UMP firmware each time the link state changes. Up until now, the driver would wait for the previous event to complete, then proceed to gather data through a series of phy accesses. Since phy accesses are relatively slow, it is possible for another thread to attempt to submit its own event while the UMP code is still construction its message. This patch seeks to minimize the collision window as much as possible by preloading the phy data. Signed-off-by: Matt Carlson <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Fix NVRAM page writes on newer devicesMatt Carlson1-2/+5
On newer devices, the hardware expects the NVRAM address register to be written only once per NVRAM page. To do otherwise causes NVRAM corruption. This patch fixes the problem. Signed-off-by: Matt Carlson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Fix copper autoneg adv checksMatt Carlson1-1/+10
When checking the autoneg advertisements, the driver failed to include the master and master enable bits for the bcm5701. This patch fixes the problem. Signed-off-by: Matt Carlson <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Fix stats while interface is downMatt Carlson1-4/+4
If the tg3 interface is down, the driver will return ethtool stats uninitialized. This patch zeroes out the destination stat buffer in such a case. Signed-off-by: Matt Carlson <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13tg3: Disable new DMA engine for 57766Matt Carlson1-5/+0
A bug was found in the new DMA engine for the 57766. This patch disables it, which causes the device to fallback to the old DMA engine. Signed-off-by: Matt Carlson <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-02-13Merge branch 'master' of ↵David S. Miller8-373/+265
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2012-02-13sfc: Warn if unable to create MTDsBen Hutchings2-2/+7
Log an explicit warning if we are unable to create MTDs for a net device. Also correct the comment about why mtd_device_register() may fail; there is no longer an MTD table to fill up. Signed-off-by: Ben Hutchings <[email protected]>
2012-02-13sfc: Replace some literal constants with EFX_PAGE_SIZE/EFX_BUF_SIZEBen Hutchings3-5/+7
The 'page size' for PCIe DMA, i.e. the alignment of boundaries at which DMA must be broken, is 4KB. Name this value as EFX_PAGE_SIZE and use it in efx_max_tx_len(). Redefine EFX_BUF_SIZE as EFX_PAGE_SIZE since its value is also a result of that requirement, and use it in efx_init_special_buffer(). Signed-off-by: Ben Hutchings <[email protected]>
2012-02-13sfc: Do not retry hardware probe if it schedules a resetBen Hutchings1-34/+16
If efx_pci_probe_main() schedules an INVISIBLE or ALL reset (but nothing more drastic), we retry it up to 5 times. So far as I'm aware, this was a workaround for bugs in Falcon A0 which were fixed in production silicon. Remove the retry. Signed-off-by: Ben Hutchings <[email protected]>
2012-02-13sfc: Skip RX end-of-batch work on channels without an RX queueBen Hutchings1-10/+11
The code in efx_process_channel() to update the RX queue after each batch of RX completions works out as a no-op on a TX-only channel where the RX queue structure is set to all-zeroes, but (1) efx_channel_get_rx_queue() will BUG() if DEBUG is defined, and (2) it's a waste of time. Signed-off-by: Ben Hutchings <[email protected]>
2012-02-13e1000e: cleanup goto statements to exit points without common workBruce Allan8-303/+212
Per ./Documentation/CodingStyle, goto statements are acceptable for the centralized exiting of functions when there are multiple exit points which share common work such as cleanup. When no common work is required for multiple exit points, the function should just return at these exit points instead of doing an unnecessary jump to a centralized return. This patch cleans up the inappropriate use of goto statements, and removes unnecessary variables (or move to a smaller scope) where possible as a result of the cleanups. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.