aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2018-08-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds449-9679/+27830
Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
2018-08-14Merge tag 'acpi-4.19-rc1' of ↵Linus Torvalds3-7/+13
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These revert two ACPICA commits that are not needed any more, rework the property graphs support in ACPI to be more aligned with the analogous DT code, add some new quirks and remove one that isn't needed any more, add a special platform driver to enumerate multiple I2C devices hooked up to the same device object in the ACPI tables and update the battery and button drivers. Specifics: - Revert two ACPICA commits that are not needed any more (Erik Schmauss). - Rework property graph support in the ACPI device properties framework to make it behave more like the analogous DT code and update the documentation of it (Sakari Ailus). - Change the default ACPI device status after initialization to ACPI_STA_DEFAULT instead of 0 (Hans de Goede). - Add a special platform driver for enumerating multiple I2C devices hooked up to the same object in the ACPI tables (Hans de Goede). - Fix the ACPI battery driver to avoid reporting full capacity on systems without support for that and clean it up (Hans de Goede, Dmitry Rozhkov, Lucas Rangit Magasweran). - Add two system wakeup quirks to the ACPI EC driver (Aaron Ma, Mika Westerberg). - Add the touchscreen on Dell Venue Pro 7139 to the list of "always present" devices to make it work (Tristian Celestin). - Revert a special tables handling quirk for Dell XPS 9570 and Precision M5530 which is not needed any more (Kai Heng Feng). - Add support for a new OEM _OSI string to allow system vendors to work around issues with NVidia HDMI audio (Alex Hung). - Prevent the ACPI button driver from reporting excessive system wakeup events and clean it up (Ravi Chandra Sadineni, Randy Dunlap). - Clean up two minor code style issues in the ACPI core and GHES handling on ARM64 (Dongjiu Geng, John Garry, Tom Todd)" * tag 'acpi-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits) platform/x86: Add ACPI i2c-multi-instantiate pseudo driver ACPI / x86: utils: Remove status workaround from acpi_device_always_present() ACPI / scan: Create platform device for fwnodes with multiple i2c devices ACPI / scan: Initialize status to ACPI_STA_DEFAULT ACPI / EC: Add another entry for Thinkpad X1 Carbon 6th ACPI: bus: Fix a pointer coding style issue arm64 / ACPI: clean the additional checks before calling ghes_notify_sea() ACPI / scan: Add static attribute to indirect_io_hosts[] ACPI / battery: Do not export energy_full[_design] on devices without full_charge_capacity ACPI / EC: Use ec_no_wakeup on ThinkPad X1 Yoga 3rd ACPI / battery: get rid of negations in conditions ACPI / battery: use specialized print macros ACPI / battery: reorder headers alphabetically ACPI / battery: drop inclusion of init.h ACPI: battery: remove redundant old_present check on insertion ACPI: property: graph: Update graph documentation to use generic references ACPI: property: graph: Improve graph documentation for port/ep numbering ACPI: property: graph: Fix graph documentation ACPI: property: Update documentation for hierarchical data extension 1.1 ACPI: property: Document key numbering for hierarchical data extension refs ...
2018-08-14cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0Ganesh Goudar1-0/+2
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Add vlan filter setting by ethtool command -KPeng Li1-0/+6
Revision(0x20) HW does not support enabling or disabling individual netdev's HW_VLAN_CTAG_FILTER feature, and Revision(0x21) supports enabling or disabling individual netdev's HW_VLAN_CTAG_FILTER feature. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Set tx ring' tc info when netdev is upYunsheng Lin2-0/+25
The HNS3_RING_TX_RING_TC_REG register is used to map tx ring to specific tc, the tx queue to tc mapping is needed by the hardware to do the correct tx schedule. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Remove tx ring BD len register in hns3_enetYunsheng Lin2-3/+0
There is no HNS3_RING_TX_RING_BD_LEN_REG register according to UM, so this patch removes it. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Fix desc num set to default when setting channelYunsheng Lin1-10/+12
When user set the channel num using "ethtool -L ethX", the desc num of BD will set to default value, which will cause desc num set by user lost problem. This patch fixes it by restoring the desc num set by user when setting channel num. Fixes: 09f2af6405b8 ("net: hns3: add support to modify tqps number") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Fix for phy link issue when using marvell phy driverJian Shen1-0/+2
For marvell phy m88e1510, bit SUPPORTED_FIBRE of phydev->supported is default on. Both phy_resume() and phy_suspend() will check the SUPPORTED_FIBRE bit and write register of fibre page. Currently in hns3 driver, the SUPPORTED_FIBRE bit will be cleared after phy_connect_direct() finished. Because phy_resume() is called in phy_connect_direct(), and phy_suspend() is called when disconnect phy device, so the operation for fibre page register is not symmetrical. It will cause phy link issue when reload hns3 driver. This patch fixes it by disable the SUPPORTED_FIBRE before connecting phy. Fixes: 256727da7395 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Fix for information of phydev lost problem when down/upFuyun Liang3-9/+44
Function call of phy_connect_direct will reinitialize phydev. Some information like advertising will be lost. Phy_connect_direct only needs to be called once. And driver can run well. This patch adds some functions to ensure that phy_connect_direct is called only once to solve the information of phydev lost problem occurring when we stop the net and open it again. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zeroXi Wang1-1/+1
According to the functional specification of hardware, the first descriptor of response from command 'lookup vlan talbe' is not valid. Currently, the first descriptor is parsed as normal value, which will cause an expected error. This patch fixes this problem by skipping the first descriptor. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Xi Wang <wangxi11@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14net: hns3: Add support for serdes loopback selftestPeng Li3-5/+75
This patch adds support for serdes loopback selftest in hns3 driver. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-14Merge branches 'acpica' and 'acpi-property'Rafael J. Wysocki3-7/+13
Merge ACPICA changes and updates of the ACPI device properties framework for 4.19. These revert two ACPICA commits that are not needed any more and modify the properties graph support in ACPI to be more in-line with the analogous DT code. * acpica: ACPICA: Update version to 20180629 ACPICA: Revert "iASL compiler: allow compilation of externals with paths that refer to existing names" ACPICA: Revert "iASL: change processing of external op namespace nodes for correctness" * acpi-property: ACPI: property: graph: Update graph documentation to use generic references ACPI: property: graph: Improve graph documentation for port/ep numbering ACPI: property: graph: Fix graph documentation ACPI: property: Update documentation for hierarchical data extension 1.1 ACPI: property: Document key numbering for hierarchical data extension refs ACPI: property: Use data node name and reg property for graphs ACPI: property: Allow direct graph endpoint references ACPI: property: Make the ACPI graph API private ACPI: property: Document hierarchical data extension references ACPI: property: Allow making references to non-device nodes ACPI: Convert ACPI reference args to generic fwnode reference args
2018-08-13bnxt_en: take coredump_record structure off stackArnd Bergmann1-6/+3
The bnxt_coredump_record structure is very long, causing a warning about possible stack overflow on 32-bit architectures: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c: In function 'bnxt_get_coredump': drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2989:1: error: the frame size of 1188 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] I could not see any reason to operate on an on-stack copy of the structure before copying it back into the caller-provided buffer, which also simplifies the code here. Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13net: systemport: fix unused function warningArnd Bergmann1-4/+2
The only remaining caller of this function is inside of an #ifdef after another caller got removed. This causes a harmless warning in some configurations: drivers/net/ethernet/broadcom/bcmsysport.c:1068:13: error: 'bcm_sysport_resume_from_wol' defined but not used [-Werror=unused-function] Removing the #ifdef around the PM functions simplifies the code and avoids the problem but letting the compiler drop the unused functions silently. Fixes: 9e85e22713d6 ("net: systemport: Do not re-configure upon WoL interrupt") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13net: stmmac: mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
The newly added suspend/resume functions cause a build warning when CONFIG_PM is disabled: drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c:324:12: error: 'stmmac_pci_resume' defined but not used [-Werror=unused-function] drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c:306:12: error: 'stmmac_pci_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so gcc can drop them silently. Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13bnxt_en: avoid string overflow for record->system_nameArnd Bergmann1-2/+2
The utsname()->nodename string may be 64 bytes long, and it gets copied without the trailing nul byte into the shorter record->system_name, as gcc now warns: In file included from include/linux/bitmap.h:9, from include/linux/ethtool.h:16, from drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:13: In function 'strncpy', inlined from 'bnxt_fill_coredump_record' at drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2863:2: include/linux/string.h:254:9: error: '__builtin_strncpy' output truncated before terminating nul copying as many bytes from a string as its length [-Werror=stringop-truncation] Using strlcpy() at least avoids overflowing the destination buffer and adds proper nul-termination. It may still truncate long names though, which probably can't be solved here. Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13net: lan743x: fix building without CONFIG_PTP_1588_CLOCKArnd Bergmann2-11/+6
Building without CONFIG_PTP_1588_CLOCK results in multiple failures, this was obviously not well tested: drivers/net/ethernet/microchip/lan743x_ptp.c: In function 'lan743x_ptp_isr': drivers/net/ethernet/microchip/lan743x_ptp.c:781:28: error: 'struct lan743x_ptp' has no member named 'ptp_clock'; did you mean 'tx_ts_lock'? ptp_schedule_worker(ptp->ptp_clock, 0); ^~~~~~~~~ tx_ts_lock drivers/net/ethernet/microchip/lan743x_ptp.c: In function 'lan743x_ptp_open': drivers/net/ethernet/microchip/lan743x_ptp.c:879:6: error: unused variable 'ret' [-Werror=unused-variable] int ret = -ENODEV; ^~~ At top level: drivers/net/ethernet/microchip/lan743x_ptp.c:63:13: error: 'lan743x_ptp_tx_ts_enqueue_ts' defined but not used [-Werror=unused-function] static void lan743x_ptp_tx_ts_enqueue_ts(struct lan743x_adapter *adapter, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors drivers/net/ethernet/microchip/lan743x_ethtool.c: In function 'lan743x_ethtool_get_ts_info': drivers/net/ethernet/microchip/lan743x_ethtool.c:558:19: error: 'struct lan743x_ptp' has no member named 'ptp_clock'; did you mean 'tx_ts_lock'? Those #ifdef checks are hard to get right, replace them all with IS_ENABLED() checks that leave the same code visible to the compiler but let it optimize out the unused bits based on the configuration. Fixes: 07624df1c9ef ("lan743x: lan743x: Add PTP support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13net: lan743x: select CRC16Arnd Bergmann1-0/+1
lan743x now fails to build when CONFIG_CRC16 is disabled: drivers/net/ethernet/microchip/lan743x_main.o: In function crc16' Force it on like all other users do. Fixes: 4d94282afd95 ("lan743x: Add power management support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13nfp: clean up return types in kdoc commentsJakub Kicinski2-6/+2
Remove 'Return:' information from functions which no longer return a value. Also update name and return types of nfp_nffw_info access functions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13net/mlx5: Improve argument name for add flow APIEli Cohen1-4/+4
The last argument to mlx5_add_flow_rules passes the number of destinations in the struct pointed to by the dest arg. Change the name to better reflect this fact. Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-13net/mlx5: Reorganize the makefileSaeed Mahameed1-17/+40
Reorganize the Makefile and group files together according to their functionality and importance. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-13net/mlx5e: clock.c depends on CONFIG_PTP_1588_CLOCKMoshe Shemesh6-6/+34
lib/clock.c includes clock related functions which require ptp support. Thus compile out lib/clock.c and add the needed function stubs in case kconfig CONFIG_PTP_1588_CLOCK is off. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-13net/mlx5e: vxlan.c depends on CONFIG_VXLANSaeed Mahameed3-9/+11
When vxlan is not enabled by kernel, no need to enable it in mlx5. Compile out lib/vxlan.c if CONFIG_VXLAN is not selected. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
2018-08-13net/mlx5e: Move flow steering declarations into en/fs.hSaeed Mahameed2-126/+129
Move flow steering declarations and definitions into the dedicated en/fs.h header file Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
2018-08-13net/mlx5e: Add CONFIG_MLX5_EN_ARFS for accelerated flow steering supportSaeed Mahameed6-68/+68
Add new mlx5 Kconfig flag to allow selecting accelerated flow steering support, and compile out en_arfs.c if not selected. Move arfs declarations and definitions to en/fs.h header file. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
2018-08-13net/mlx5e: Add CONFIG_MLX5_EN_RXNFC for ethtool rx nfcSaeed Mahameed5-21/+53
Add new mlx5 Kconfig flag to allow selecting ethtool rx nfc support, and compile out en_fs_ehtool.c if not selected. Add en/fs.h header file to host all steering declarations and definitions. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
2018-08-13net/mlx5e: Ethtool steering, move ethtool callbacksSaeed Mahameed3-64/+62
Move ethool rxnfc callback into en_fs_etthool file where they belong. This will allow us to make many ethtool fs related helper functions static. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-13net/mlx5e: Ethtool steering, l4 proto supportSaeed Mahameed1-3/+16
Add support for l4 proto ip field in ethtool flow steering. Example: Redirect icmpv6 to rx queue #2 ethtool -U eth0 flow-type ip6 l4proto 58 action 2 Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-13net/mlx5e: Ethtool steering, ip6 supportSaeed Mahameed1-0/+129
Add ip6 support for ethtool flow steering. New supported flow types: ip6|tcp6|udp6| Supported fields: src-ip|dst-ip|src-port|dst-port Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-13net/mlx5e: Ethtool steering flow parsing refactoringSaeed Mahameed1-102/+128
Have a parsing function per flow type, that converts from ethtool rx flow spec to mlx5 flow spec. Will be useful to add support for ip6 ethtool flow steering in the next patch. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-13net/mlx5e: Ethtool steering flow validation refactoringSaeed Mahameed1-64/+100
Have a ethtool rx flow spec validation helper function per flow type. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-08-13Merge tag 'm68k-for-v4.19-tag1' of ↵Linus Torvalds1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - Enable mac_scsi PDMA on PowerBook 500 - Generic dma_noncoherent_ops conversion - Time handling improvements - I/O accessor improvements - Conversion to MEMBLOCK and NO_BOOTMEM, to bring m68k in line with other mainstream architectures - Miscellaneous fixes and cleanups - Defconfig updates * tag 'm68k-for-v4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.18-rc6 m68k: switch to MEMBLOCK + NO_BOOTMEM m68k/page_no.h: force __va argument to be unsigned long m68k/bitops: convert __ffs to match generic declaration m68k/io: Switch mmu variant to <asm-generic/io.h> m68k/io: Move mem*io define guards to <asm/kmap.h> Input: hilkbd - Add casts to HP9000/300 I/O accessors net: mac8390: Use standard memcpy_{from,to}io() m68k/io: Add missing ioremap define guards, fix typo m68k: Remove unused set_clock_mmss() helpers m68k: mac: Use time64_t in RTC handling m68k: Use generic dma_noncoherent_ops nubus: Set default dma mask for nubus_board devices m68k/mac: Enable PDMA for PowerBook 500 series
2018-08-13liquidio: remove set but not used variable 'is25G'YueHaibing1-6/+2
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/cavium/liquidio/lio_ethtool.c: In function 'lio_set_link_ksettings': drivers/net/ethernet/cavium/liquidio/lio_ethtool.c:392:6: warning: variable 'is25G' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13cxgb4: remove set but not used variable 'spd'YueHaibing1-8/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c: In function 'print_port_info': drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:5147:14: warning: variable 'spd' set but not used [-Wunused-but-set-variable] variable 'spd' is set but not used since commit 547fd27241a8 ("cxgb4: Warn if device doesn't have enough PCI bandwidth") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13lan743x: lan743x: Remove duplicated include from lan743x_ptp.cYue Haibing1-1/+0
Remove duplicated include. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13r8169: don't use MSI-X on RTL8168gHeiner Kallweit1-0/+5
There have been two reports that network doesn't come back on resume from suspend when using MSI-X. Both cases affect the same chip version (RTL8168g - version 40), on different systems. Falling back to MSI fixes the issue. Even though we don't really have a proof yet that the network chip version is to blame, let's disable MSI-X for this version. Reported-by: Steve Dodd <steved424@gmail.com> Reported-by: Lou Reed <gogen@disroot.org> Tested-by: Steve Dodd <steved424@gmail.com> Tested-by: Lou Reed <gogen@disroot.org> Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13net: nixge: Don't store skb in app4 field of descriptorMoritz Fischer1-1/+0
Don't store skb in app4 field of descriptor since it is not being used anywhere (including hardware). Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13net: nixge: Do not zero application specific fields in descMoritz Fischer1-10/+0
Do not zero application specific fields in DMA descriptors. The hardware does ignore them, so should software. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-15/+12
2018-08-11net: socionext: Increase descriptors to 256Ilias Apalodimas1-3/+2
Increasing descriptors to 256 from 128 and adjusting the NAPI weight to 64 increases performace on Rx by ~20% on 64byte packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: socionext: Use descriptor info instead of MMIO reads on RxIlias Apalodimas1-15/+10
MMIO reads for remaining packets in queue occur (at least)twice per invocation of netsec_process_rx(). We can use the packet descriptor to identify if it's owned by the hardware and break out, avoiding the more expensive MMIO read operations. This has a ~2% increase on the pps of the Rx path when tested with 64byte packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11vxge: remove set but not used variable 'req_out', 'status' and 'ret'YueHaibing1-21/+6
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/neterion/vxge/vxge-config.c:1097:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/neterion/vxge/vxge-config.c:2263:6: warning: variable 'req_out' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/neterion/vxge/vxge-config.c:2262:22: warning: variable 'status' set but not used [-Wunused-but-set-variable] drivers/net/ethernet/neterion/vxge/vxge-config.c:2360:22: warning: variable 'status' set but not used [-Wunused-but-set-variable] enum vxge_hw_status status = VXGE_HW_OK; Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11lan743x: lan743x: Add PTP supportBryan Whitehead6-5/+1443
PTP support includes: Ingress, and egress timestamping. One step timestamping available. PTP clock support. Periodic output support. Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: ethernet: ti: cpsw: fix runtime_pm while add/kill vlanIvan Khoronzhuk1-4/+7
It's exclusive with normal behaviour but if try to set vlan to one of the reserved values is made, the cpsw runtime pm is broken. Fixes: a6c5d14f5136 ("drivers: net: cpsw: ndev: fix accessing to suspended device") Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: ethernet: ti: cpsw: clear all entries when delete vidIvan Khoronzhuk2-11/+5
In cases if some of the entries were not found in forwarding table while killing vlan, the rest not needed entries still left in the table. No need to stop, as entry was deleted anyway. So fix this by returning error only after all was cleaned. To implement this, return -ENOENT in cpsw_ale_del_mcast() as it's supposed to be. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10bnxt_en: Fix strcpy() warnings in bnxt_ethtool.cVasundhara Volam1-3/+3
This patch fixes following smatch warnings: drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2826 bnxt_fill_coredump_seg_hdr() error: strcpy() '"sEgM"' too large for 'seg_hdr->signature' (5 vs 4) drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2858 bnxt_fill_coredump_record() error: strcpy() '"cOrE"' too large for 'record->signature' (5 vs 4) drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:2879 bnxt_fill_coredump_record() error: strcpy() 'utsname()->sysname' too large for 'record->os_name' (65 vs 32) Fixes: 6c5657d085ae ("bnxt_en: Add support for ethtool get dump.") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10liquidio: copperhead LED identificationRaghu Vatsavayi2-5/+23
Add LED identification support for liquidio TP copperhead cards. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qed/qede: qede_setup_tc() can be statickbuild test robot1-1/+1
Fixes: 5e7baf0fcb2a ("qed/qede: Multi CoS support.") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10mlxsw: core: remove unnecessary function mlxsw_core_driver_putYueHaibing1-12/+0
The function mlxsw_core_driver_put only traverse mlxsw_core_driver_list to find the matched mlxsw_driver,but never used it. So it can be removed safely. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10net: mvneta: fix mvneta_config_rss on armada 3700Jisheng Zhang1-11/+20
The mvneta Ethernet driver is used on a few different Marvell SoCs. Some SoCs have per cpu interrupts for Ethernet events, the driver uses a per CPU napi structure for this case. Some SoCs such as armada 3700 have a single interrupt for Ethernet events, the driver uses a global napi structure for this case. Current mvneta_config_rss() always operates the per cpu napi structure. Fix it by operating a global napi for "single interrupt" case, and per cpu napi structure for remaining cases. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Fixes: 2636ac3cc2b4 ("net: mvneta: Add network support for Armada 3700 SoC") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.