aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2023-03-08r8169: prepare rtl_hw_aspm_clkreq_enable for usage in atomic contextHeiner Kallweit1-2/+3
Bail out if the function is used with chip versions that don't support ASPM configuration. In addition remove the delay, it tuned out that it's not needed, also vendor driver r8125 doesn't have it. Suggested-by: Kai-Heng Feng <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Kai-Heng Feng <[email protected]> Tested-by: Holger Hoffstätte <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-08r8169: enable cfg9346 config register access in atomic contextHeiner Kallweit1-2/+16
For disabling ASPM during NAPI poll we'll have to unlock access to the config registers in atomic context. Other code parts running with config register access unlocked are partially longer and can sleep. Add a usage counter to enable parallel execution of code parts requiring unlocked config registers. Reviewed-by: Simon Horman <[email protected]> Tested-by: Kai-Heng Feng <[email protected]> Tested-by: Holger Hoffstätte <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-08r8169: use spinlock to protect access to registers Config2 and Config5Heiner Kallweit1-10/+37
For disabling ASPM during NAPI poll we'll have to access both registers in atomic context. Use a spinlock to protect access. Reviewed-by: Simon Horman <[email protected]> Tested-by: Kai-Heng Feng <[email protected]> Tested-by: Holger Hoffstätte <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-08r8169: use spinlock to protect mac ocp register accessHeiner Kallweit1-4/+33
For disabling ASPM during NAPI poll we'll have to access mac ocp registers in atomic context. This could result in races because a mac ocp read consists of a write to register OCPDR, followed by a read from the same register. Therefore add a spinlock to protect access to mac ocp registers. Reviewed-by: Simon Horman <[email protected]> Tested-by: Kai-Heng Feng <[email protected]> Tested-by: Holger Hoffstätte <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-08netxen_nic: Replace fake flex-array with flexible-array memberGustavo A. R. Silva1-1/+1
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Transform zero-length array into flexible-array member in struct nx_cardrsp_rx_ctx_t. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:361:26: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=] drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:372:25: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=] This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/265 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/ZAZ57I6WdQEwWh7v@work Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-07igc: Clean up and optimize watchdog taskSasha Neftin2-19/+0
i225/i226 parts used only one media type copper. The copper media type is not replaceable. Clean up the code accordingly, and remove the obsolete media replacement and reset options. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-03-07igc: offload queue max SDU from tc-taprioTan Tee Min3-4/+31
Add support for configuring the max SDU for each Tx queue. If not specified, keep the default. Signed-off-by: Tan Tee Min <[email protected]> Signed-off-by: Muhammad Husaini Zulkifli <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-03-07igc: Add qbv_config_change_errors counterMuhammad Husaini Zulkifli4-0/+15
Add ConfigChangeError(qbv_config_change_errors) when user try to set the AdminBaseTime to past value while the current GCL is still running. The ConfigChangeError counter should not be increased when a gate control list is scheduled into the future. User can use "ethtool -S <interface> | grep qbv_config_change_errors" command to check the counter values. Signed-off-by: Muhammad Husaini Zulkifli <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-03-07ethernet: ice: avoid gcc-9 integer overflow warningArnd Bergmann1-4/+4
With older compilers like gcc-9, the calculation of the vlan priority field causes a false-positive warning from the byteswap: In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4: drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower': include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow] 15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \ | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16' 106 | ___constant_swab16(x) : \ | ^~~~~~~~~~~~~~~~~~ include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16' 42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x))) | ^~~~~~~~ include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16' 96 | #define cpu_to_be16 __cpu_to_be16 | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16' 1458 | cpu_to_be16((match.key->vlan_priority << | ^~~~~~~~~~~ After a change to be16_encode_bits(), the code becomes more readable to both people and compilers, which avoids the warning. Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev") Suggested-by: Alexander Lobakin <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-03-07ice: don't ignore return codes in VSI related codeMichal Swiatkowski1-7/+10
There were few smatch warnings reported by Dan: - ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner - return values in ice_vsi_cfg_def were ignored - in ice_vsi_rebuild return value was ignored in case rebuild failed, it was a never reached code, however, rewrite it for clarity. - ice_vsi_cfg_tc can return 0 instead of ret Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-03-07ice: Fix DSCP PFC TLV creationDave Ertman1-1/+1
When creating the TLV to send to the FW for configuring DSCP mode PFC,the PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8 bit bitmask for enabled classes for PFC. This means that traffic classes 4-7 could not be enabled for PFC. Remove the mask completely, as it is not necessary, as we are assigning 8 bits to an 8 bit field. Fixes: 2a87bd73e50d ("ice: Add DSCP support") Signed-off-by: Dave Ertman <[email protected]> Signed-off-by: Karen Ostrowska <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-03-06net: ethernet: mtk_eth_soc: fix RX data corruption issueDaniel Golle2-1/+3
Fix data corruption issue with SerDes connected PHYs operating at 1.25 Gbps speed where we could previously observe about 30% packet loss while the bad packet counter was increasing. As almost all boards with MediaTek MT7622 or MT7986 use either the MT7531 switch IC operating at 3.125Gbps SerDes rate or single-port PHYs using rate-adaptation to 2500Base-X mode, this issue only got exposed now when we started trying to use SFP modules operating with 1.25 Gbps with the BananaPi R3 board. The fix is to set bit 12 which disables the RX FIFO clear function when setting up MAC MCR, MediaTek SDK did the same change stating: "If without this patch, kernel might receive invalid packets that are corrupted by GMAC."[1] [1]: https://git01.mediatek.com/plugins/gitiles/openwrt/feeds/mtk-openwrt-feeds/+/d8a2975939a12686c4a95c40db21efdc3f821f63 Fixes: 42c03844e93d ("net-next: mediatek: add support for MediaTek MT7622 SoC") Tested-by: Bjørn Mork <[email protected]> Signed-off-by: Daniel Golle <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/138da2735f92c8b6f8578ec2e5a794ee515b665f.1677937317.git.daniel@makrotopia.org Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-06bnxt_en: Fix the double free during device removalSelvin Xavier2-2/+2
Following warning reported by KASAN during driver unload ================================================================== BUG: KASAN: double-free in bnxt_remove_one+0x103/0x200 [bnxt_en] Free of addr ffff88814e8dd4c0 by task rmmod/17469 CPU: 47 PID: 17469 Comm: rmmod Kdump: loaded Tainted: G S 6.2.0-rc7+ #2 Hardware name: Dell Inc. PowerEdge R740/01YM03, BIOS 2.3.10 08/15/2019 Call Trace: <TASK> dump_stack_lvl+0x33/0x46 print_report+0x17b/0x4b3 ? __call_rcu_common.constprop.79+0x27e/0x8c0 ? __pfx_free_object_rcu+0x10/0x10 ? __virt_addr_valid+0xe3/0x160 ? bnxt_remove_one+0x103/0x200 [bnxt_en] kasan_report_invalid_free+0x64/0xd0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kasan_slab_free+0x179/0x1c0 ? bnxt_remove_one+0x103/0x200 [bnxt_en] __kmem_cache_free+0x194/0x350 bnxt_remove_one+0x103/0x200 [bnxt_en] pci_device_remove+0x62/0x110 device_release_driver_internal+0xf6/0x1c0 driver_detach+0x76/0xe0 bus_remove_driver+0x89/0x160 pci_unregister_driver+0x26/0x110 ? strncpy_from_user+0x188/0x1c0 bnxt_exit+0xc/0x24 [bnxt_en] __x64_sys_delete_module+0x21f/0x390 ? __pfx___x64_sys_delete_module+0x10/0x10 ? __pfx_mem_cgroup_handle_over_high+0x10/0x10 ? _raw_spin_lock+0x87/0xe0 ? __pfx__raw_spin_lock+0x10/0x10 ? __audit_syscall_entry+0x185/0x210 ? ktime_get_coarse_real_ts64+0x51/0x80 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x37/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7effcb6fd71b Code: 73 01 c3 48 8b 0d 6d 17 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 17 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffeada270b8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 00005623660e0750 RCX: 00007effcb6fd71b RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005623660e07b8 RBP: 0000000000000000 R08: 00007ffeada26031 R09: 0000000000000000 R10: 00007effcb771280 R11: 0000000000000206 R12: 00007ffeada272e0 R13: 00007ffeada28bc4 R14: 00005623660e02a0 R15: 00005623660e0750 </TASK> Auxiliary device structures are freed in bnxt_aux_dev_release. So avoid calling kfree from bnxt_remove_one. Also, set bp->edev to NULL before freeing the auxilary private structure. Fixes: d80d88b0dfff ("bnxt_en: Add auxiliary driver support") Reviewed-by: Ajit Khaparde <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-06bnxt_en: Avoid order-5 memory allocation for TPA dataMichael Chan1-11/+12
The driver needs to keep track of all the possible concurrent TPA (GRO/LRO) completions on the aggregation ring. On P5 chips, the maximum number of concurrent TPA is 256 and the amount of memory we allocate is order-5 on systems using 4K pages. Memory allocation failure has been reported: NetworkManager: page allocation failure: order:5, mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 15 PID: 2995 Comm: NetworkManager Kdump: loaded Not tainted 5.10.156 #1 Hardware name: Dell Inc. PowerEdge R660/0M1CC5, BIOS 0.2.25 08/12/2022 Call Trace: dump_stack+0x57/0x6e warn_alloc.cold.120+0x7b/0xdd ? _cond_resched+0x15/0x30 ? __alloc_pages_direct_compact+0x15f/0x170 __alloc_pages_slowpath.constprop.108+0xc58/0xc70 __alloc_pages_nodemask+0x2d0/0x300 kmalloc_order+0x24/0xe0 kmalloc_order_trace+0x19/0x80 bnxt_alloc_mem+0x1150/0x15c0 [bnxt_en] ? bnxt_get_func_stat_ctxs+0x13/0x60 [bnxt_en] __bnxt_open_nic+0x12e/0x780 [bnxt_en] bnxt_open+0x10b/0x240 [bnxt_en] __dev_open+0xe9/0x180 __dev_change_flags+0x1af/0x220 dev_change_flags+0x21/0x60 do_setlink+0x35c/0x1100 Instead of allocating this big chunk of memory and dividing it up for the concurrent TPA instances, allocate each small chunk separately for each TPA instance. This will reduce it to order-0 allocations. Fixes: 79632e9ba386 ("bnxt_en: Expand bnxt_tpa_info struct to support 57500 chips.") Reviewed-by: Somnath Kotur <[email protected]> Reviewed-by: Damodharam Ammepalli <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-06net: stmmac: add to set device wake up flag when stmmac init phyRongguang Wei1-0/+1
When MAC is not support PMT, driver will check PHY's WoL capability and set device wakeup capability in stmmac_init_phy(). We can enable the WoL through ethtool, the driver would enable the device wake up flag. Now the device_may_wakeup() return true. But if there is a way which enable the PHY's WoL capability derectly, like in BIOS. The driver would not know the enable thing and would not set the device wake up flag. The phy_suspend may failed like this: [ 32.409063] PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x50 returns -16 [ 32.409065] PM: Device stmmac-1:00 failed to suspend: error -16 [ 32.409067] PM: Some devices failed to suspend, or early wake event detected Add to set the device wakeup enable flag according to the get_wol function result in PHY can fix the error in this scene. v2: add a Fixes tag. Fixes: 1d8e5b0f3f2c ("net: stmmac: Support WOL with phy") Signed-off-by: Rongguang Wei <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-03thermal: Use thermal_zone_device_type() accessorDaniel Lezcano1-1/+1
Replace the accesses to 'tz->type' by its accessor version in order to self-encapsulate the thermal_zone_device structure. Signed-off-by: Daniel Lezcano <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> #mlxsw Reviewed-by: AngeloGioacchino Del Regno <[email protected]> #MediaTek LVTS Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-03-03thermal/core: Use the thermal zone 'devdata' accessor in remaining driversDaniel Lezcano2-8/+8
The thermal zone device structure is exposed to the different drivers and obviously they access the internals while that should be restricted to the core thermal code. In order to self-encapsulate the thermal core code, we need to prevent the drivers accessing directly the thermal zone structure and provide accessor functions to deal with. Use the devdata accessor introduced in the previous patch. No functional changes intended. Signed-off-by: Daniel Lezcano <[email protected]> Acked-by: Mark Brown <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> #mlxsw Acked-by: Gregory Greenman <[email protected]> #iwlwifi Acked-by: Sebastian Reichel <[email protected]> #power_supply Acked-by: Damien Le Moal <[email protected]> #ahci Acked-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2023-03-03nfp: fix esp-tx-csum-offload doesn't take effectHuanhuan Wang1-0/+4
When esp-tx-csum-offload is set to on, the protocol stack shouldn't calculate the IPsec offload packet's csum, but it does. Because the callback `.ndo_features_check` incorrectly masked NETIF_F_CSUM_MASK bit. Fixes: 57f273adbcd4 ("nfp: add framework to support ipsec offloading") Signed-off-by: Huanhuan Wang <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-03nfp: fix incorrectly set csum flag for nfdk pathHuanhuan Wang2-4/+10
The csum flag of IPsec packet are set repeatedly. Therefore, the csum flag set of IPsec and non-IPsec packet need to be distinguished. As the ipv6 header does not have a csum field, so l3-csum flag is not required to be set for ipv6 case. Fixes: 436396f26d50 ("nfp: support IPsec offloading for NFP3800") Signed-off-by: Huanhuan Wang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-03nfp: fix incorrectly set csum flag for nfd3 pathHuanhuan Wang2-5/+27
The csum flag of IPsec packet are set repeatedly. Therefore, the csum flag set of IPsec and non-IPsec packet need to be distinguished. As the ipv6 header does not have a csum field, so l3-csum flag is not required to be set for ipv6 case. L4-csum flag include the tcp csum flag and udp csum flag, we shouldn't set the udp and tcp csum flag at the same time for one packet, should set l4-csum flag according to the transport layer is tcp or udp. Fixes: 57f273adbcd4 ("nfp: add framework to support ipsec offloading") Signed-off-by: Huanhuan Wang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-03ice: copy last block omitted in ice_get_module_eeprom()Petr Oros1-2/+4
ice_get_module_eeprom() is broken since commit e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") In this refactor, ice_get_module_eeprom() reads the eeprom in blocks of size 8. But the condition that should protect the buffer overflow ignores the last block. The last block always contains zeros. Bug uncovered by ethtool upstream commit 9538f384b535 ("netlink: eeprom: Defer page requests to individual parsers") After this commit, ethtool reads a block with length = 1; to read the SFF-8024 identifier value. unpatched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 00 00 00 00 00 00 $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 00 00 00 00 $ $ ethtool -m enp65s0f0np0 Offset Values ------ ------ 0x0000: 11 06 06 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 01 08 00 0x0070: 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 patched driver: $ ethtool -m enp65s0f0np0 offset 0x90 length 8 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c $ ethtool -m enp65s0f0np0 offset 0x90 length 12 Offset Values ------ ------ 0x0090: 00 00 01 a0 4d 65 6c 6c 61 6e 6f 78 $ ethtool -m enp65s0f0np0 Identifier : 0x11 (QSFP28) Extended identifier : 0x00 Extended identifier description : 1.5W max. Power consumption Extended identifier description : No CDR in TX, No CDR in RX Extended identifier description : High Power Class (> 3.5 W) not enabled Connector : 0x23 (No separable connector) Transceiver codes : 0x88 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Transceiver type : 40G Ethernet: 40G Base-CR4 Transceiver type : 25G Ethernet: 25G Base-CR CA-N Encoding : 0x05 (64B/66B) BR, Nominal : 25500Mbps Rate identifier : 0x00 Length (SMF,km) : 0km Length (OM3 50um) : 0m Length (OM2 50um) : 0m Length (OM1 62.5um) : 0m Length (Copper or Active cable) : 1m Transmitter technology : 0xa0 (Copper cable unequalized) Attenuation at 2.5GHz : 4db Attenuation at 5.0GHz : 5db Attenuation at 7.0GHz : 7db Attenuation at 12.9GHz : 10db ........ .... Fixes: e9c9692c8a81 ("ice: Reimplement module reads used by ethtool") Signed-off-by: Petr Oros <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Jesse Brandeburg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-03-01net: lan966x: Fix port police support using tc-matchallHoratiu Vultur1-1/+1
When the police was removed from the port, then it was trying to remove the police from the police id and not from the actual police index. The police id represents the id of the police and police index represents the position in HW where the police is situated. The port police id can be any number while the port police index is a number based on the port chip port. Fix this by deleting the police from HW that is situated at the police index and not police id. Fixes: 5390334b59a3 ("net: lan966x: Add port police support using tc-matchall") Signed-off-by: Horatiu Vultur <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-28bgmac: fix *initial* chip reset to support BCM5358Rafał Miłecki2-2/+8
While bringing hardware up we should perform a full reset including the switch bit (BGMAC_BCMA_IOCTL_SW_RESET aka SICF_SWRST). It's what specification says and what reference driver does. This seems to be critical for the BCM5358. Without this hardware doesn't get initialized properly and doesn't seem to transmit or receive any packets. Originally bgmac was calling bgmac_chip_reset() before setting "has_robosw" property which resulted in expected behaviour. That has changed as a side effect of adding platform device support which regressed BCM5358 support. Fixes: f6a95a24957a ("net: ethernet: bgmac: Add platform device support") Cc: Jon Mason <[email protected]> Signed-off-by: Rafał Miłecki <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-27Merge tag 'net-6.3-rc1' of ↵Linus Torvalds20-116/+123
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from wireless and netfilter. The notable fixes here are the EEE fix which restores boot for many embedded platforms (real and QEMU); WiFi warning suppression and the ICE Kconfig cleanup. Current release - regressions: - phy: multiple fixes for EEE rework - wifi: wext: warn about usage only once - wifi: ath11k: allow system suspend to survive ath11k Current release - new code bugs: - mlx5: Fix memory leak in IPsec RoCE creation - ibmvnic: assign XPS map to correct queue index Previous releases - regressions: - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces - netfilter: ctnetlink: make event listener tracking global - nf_tables: allow to fetch set elements when table has an owner - mlx5: - fix skb leak while fifo resync and push - fix possible ptp queue fifo use-after-free Previous releases - always broken: - sched: fix action bind logic - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also uses a mutex - netfilter: conntrack: fix rmmod double-free race - netfilter: xt_length: use skb len to match in length_mt6, avoid issues with BIG TCP Misc: - ice: remove unnecessary CONFIG_ICE_GNSS - mlx5e: remove hairpin write debugfs files - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy" * tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits) tcp: tcp_check_req() can be called from process context net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard xen-netback: remove unused variables pending_idx and index net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy net: dsa: ocelot_ext: remove unnecessary phylink.h include net: mscc: ocelot: fix duplicate driver name error net: dsa: felix: fix internal MDIO controller resource length net: dsa: seville: ignore mscc-miim read errors from Lynx PCS net/sched: act_sample: fix action bind logic net/sched: act_mpls: fix action bind logic net/sched: act_pedit: fix action bind logic wifi: wext: warn about usage only once wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue qede: avoid uninitialized entries in coal_entry array nfc: fix memory leak of se_io context in nfc_genl_se_io ice: remove unnecessary CONFIG_ICE_GNSS net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy() ibmvnic: Assign XPS map to correct queue index docs: net: fix inaccuracies in msg_zerocopy.rst tools: net: add __pycache__ to gitignore ...
2023-02-26qede: avoid uninitialized entries in coal_entry arrayMichal Schmidt1-14/+7
Even after commit 908d4bb7c54c ("qede: fix interrupt coalescing configuration"), some entries of the coal_entry array may theoretically be used uninitialized: 1. qede_alloc_fp_array() allocates QEDE_MAX_RSS_CNT entries for coal_entry. The initial allocation uses kcalloc, so everything is initialized. 2. The user sets a small number of queues (ethtool -L). coal_entry is reallocated for the actual small number of queues. 3. The user sets a bigger number of queues. coal_entry is reallocated bigger. The added entries are not necessarily initialized. In practice, the reallocations will actually keep using the originally allocated region of memory, but we should not rely on it. The reallocation is unnecessary. coal_entry can always have QEDE_MAX_RSS_CNT entries. Fixes: 908d4bb7c54c ("qede: fix interrupt coalescing configuration") Signed-off-by: Michal Schmidt <[email protected]> Nacked-by: Manish Chopra <[email protected]> Acked-by: Manish Chopra <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-26Merge tag 'mlx5-fixes-2023-02-24' of ↵David S. Miller10-8/+40
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahemeed says: ==================== mlx5 fixes 2023-02-24 V1->V2: - Toss away arguably non-fixes patches This series provides bug fixes for mlx5 driver. Please pull and let me know if there is any problem. ====================
2023-02-26ice: remove unnecessary CONFIG_ICE_GNSSJacob Keller3-6/+4
CONFIG_ICE_GNSS was added by commit c7ef8221ca7d ("ice: use GNSS subsystem instead of TTY") as a way to allow the ice driver to optionally support GNSS features without forcing a dependency on CONFIG_GNSS. The original implementation of that commit at [1] used IS_REACHABLE. This was rejected by Olek at [2] with the suggested implementation of CONFIG_ICE_GNSS. Eventually after merging, Linus reported a .config which had CONFIG_ICE_GNSS = y when both GNSS = n and ICE = n. This confused him and he felt that the config option was not useful, and commented about it at [3]. CONFIG_ICE_GNSS is defined to y whenever GNSS = ICE. This results in it being set in cases where both options are not enabled. The goal of CONFIG_ICE_GNSS is to ensure that the GNSS support in the ice driver is enabled when GNSS is enabled. The complaint from Olek about the original IS_REACHABLE was due to the required IS_REACHABLE checks throughout the ice driver code and the fact that ice_gnss.c was compiled regardless of GNSS support. This can be fixed in the Makefile by using ice-$(CONFIG_GNSS) += ice_gnss.o In this case, if GNSS = m and ICE = y, we can result in some confusing behavior where GNSS support is not enabled because its not built in. See [4]. To disallow this, have CONFIG_ICE depend on GNSS || GNSS = n. This ensures that we cannot enable CONFIG_ICE as builtin while GNSS is a module. Drop CONFIG_ICE_GNSS, and replace the IS_ENABLED checks for it with checks for GNSS. Update the Makefile to add the ice_gnss.o object based on CONFIG_GNSS. This works to ensure that GNSS support can optionally be enabled, doesn't have an unnnecessary extra config option, and has Kbuild enforce the dependency such that you can't accidentally enable GNSS as a module and ICE as a builtin. [1] https://lore.kernel.org/intel-wired-lan/[email protected]/ [2] https://lore.kernel.org/intel-wired-lan/[email protected]/ [3] https://lore.kernel.org/all/CAHk-=wi_410KZqHwF-WL5U7QYxnpHHHNP-3xL=g_y89XnKc-uw@mail.gmail.com/ [4] https://lore.kernel.org/netdev/[email protected]/ Reported-by: Linus Torvalds <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Fixes: c7ef8221ca7d ("ice: use GNSS subsystem instead of TTY") Cc: Arkadiusz Kubalewski <[email protected]> Cc: Alexander Lobakin <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Anthony Nguyen <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-02-24ibmvnic: Assign XPS map to correct queue indexNick Child1-2/+2
When setting the XPS map value for TX queues, use the index of the transmit queue. Previously, the function was passing the index of the loop that iterates over all queues (RX and TX). This was causing invalid XPS map values. Fixes: 6831582937bd ("ibmvnic: Toggle between queue types in affinity mapping") Signed-off-by: Nick Child <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-24Merge tag 'phy-for-6.3' of ↵Linus Torvalds2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy Pull phy updates from Vinod Koul: "This features a bunch of new device support, a couple of new drivers, yaml conversion and updates of a few drivers. Core support: - New devm_of_phy_optional_get() API with users and conversion New hardware support: - Mediatek MT7986 phy support - Qualcomm SM8550 UFS, PCIe, combo phy support, SM6115 / SM4250 USB3 phy support, SM6350 combo phy support, SM6125 UFS PHY support amd SM8350 & SM8450 combo phy support - Qualcomm SNPS eUSB2 eUSB2 repeater drivers - Allwinner F1C100s USB PHY support - Tegra xusb support for Tegra234 Updates: - Yaml conversion for Qualcomm pcie2 phy and usb-hsic-phy - G4 mode support in Qualcomm UFS phy and support for various SoCs - Yaml conversion for Meson usb2 phy - TI Type C support for usb phy for j721 - Yaml conversion for Tegra xusb binding" * tag 'phy-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (106 commits) phy: qcom: phy-qcom-snps-eusb2: Add support for eUSB2 repeater phy: qcom: Add QCOM SNPS eUSB2 repeater driver dt-bindings: phy: qcom,snps-eusb2-phy: Add phys property for the repeater dt-bindings: phy: Add qcom,snps-eusb2-repeater schema file dt-bindings: phy: amlogic,g12a-usb3-pcie-phy: add missing optional phy-supply property phy: rockchip-typec: Fix unsigned comparison with less than zero phy: rockchip-typec: fix tcphy_get_mode error case phy: qcom: snps-eusb2: Add missing headers phy: qcom-qmp-combo: Add support for SM8550 phy: qcom-qmp: Add v6 DP register offsets phy: qcom-qmp: pcs-usb: Add v6 register offsets dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Document SM8550 compatible phy: qcom: Add QCOM SNPS eUSB2 driver dt-bindings: phy: Add qcom,snps-eusb2-phy schema file phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6.20 register offsets phy: qcom-qmp: pcs-pcie: Add v6 register offsets phy: qcom-qmp: pcs: Add v6.20 register offsets ...
2023-02-24Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds2-6/+30
Pull rdma updates from Jason Gunthorpe: "Quite a small cycle this time, even with the rc8. I suppose everyone went to sleep over xmas. - Minor driver updates for hfi1, cxgb4, erdma, hns, irdma, mlx5, siw, mana - inline CQE support for hns - Have mlx5 display device error codes - Pinned DMABUF support for irdma - Continued rxe cleanups, particularly converting the MRs to use xarray - Improvements to what can be cached in the mlx5 mkey cache" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (61 commits) IB/mlx5: Extend debug control for CC parameters IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors IB/hfi1: Fix math bugs in hfi1_can_pin_pages() RDMA/irdma: Add support for dmabuf pin memory regions RDMA/mlx5: Use query_special_contexts for mkeys net/mlx5e: Use query_special_contexts for mkeys net/mlx5: Change define name for 0x100 lkey value net/mlx5: Expose bits for querying special mkeys RDMA/rxe: Fix missing memory barriers in rxe_queue.h RDMA/mana_ib: Fix a bug when the PF indicates more entries for registering memory on first packet RDMA/rxe: Remove rxe_alloc() RDMA/cma: Distinguish between sockaddr_in and sockaddr_in6 by size Subject: RDMA/rxe: Handle zero length rdma iw_cxgb4: Fix potential NULL dereference in c4iw_fill_res_cm_id_entry() RDMA/mlx5: Use rdma_umem_for_each_dma_block() RDMA/umem: Remove unused 'work' member from struct ib_umem RDMA/irdma: Cap MSIX used to online CPUs + 1 RDMA/mlx5: Check reg_create() create for errors RDMA/restrack: Correct spelling RDMA/cxgb4: Fix potential null-ptr-deref in pass_establish() ...
2023-02-24net/mlx5: Geneve, Fix handling of Geneve object id as error codeMaor Dickman1-0/+1
On success, mlx5_geneve_tlv_option_create returns non negative Geneve object id. In case the object id is positive value the caller functions will handle it as an error (non zero) and will fail to offload the Geneve rule. Fix this by changing caller function ,mlx5_geneve_tlv_option_add, to return 0 in case valid non negative object id was provided. Fixes: 0ccc171ea6a2 ("net/mlx5: Geneve, Manage Geneve TLV options") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Raed Salem <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-24net/mlx5e: Verify flow_source cap before using itRoi Dayan1-1/+2
When adding send to vport rule verify flow_source matching is supported by checking the flow_source cap. Fixes: d04442540372 ("net/mlx5: E-Switch, set flow source for send to uplink rule") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-24net/mlx5: ECPF, wait for VF pages only after disabling host PFsMaher Sanalla2-0/+8
Currently, during the early stages of their unloading, particularly during SRIOV disablement, PFs/ECPFs wait on the release of all of their VFs memory pages. Furthermore, ECPFs are considered the page supplier for host VFs, hence the host VFs memory pages are freed only during ECPF cleanup when host interfaces get disabled. Thus, disabling SRIOV early in unload timeline causes the DPU ECPF to stall on driver unload while waiting on the release of host VF pages that won't be freed before host interfaces get disabled later on. Therefore, for ECPFs, wait on the release of VFs pages only after the disablement of host PFs during ECPF cleanup flow. Then, host PFs and VFs are disabled and their memory shall be freed accordingly. Fixes: 143a41d7623d ("net/mlx5: Disable SRIOV before PF removal") Signed-off-by: Maher Sanalla <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-24mlx5: fix possible ptp queue fifo use-after-freeVadim Fedorenko4-1/+22
Fifo indexes are not checked during pop operations and it leads to potential use-after-free when poping from empty queue. Such case was possible during re-sync action. WARN_ON_ONCE covers future cases. There were out-of-order cqe spotted which lead to drain of the queue and use-after-free because of lack of fifo pointers check. Special check and counter are added to avoid resync operation if SKB could not exist in the fifo because of OOO cqe (skb_id must be between consumer and producer index). Fixes: 58a518948f60 ("net/mlx5e: Add resiliency for PTP TX port timestamp") Signed-off-by: Vadim Fedorenko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-24mlx5: fix skb leak while fifo resync and pushVadim Fedorenko2-3/+5
During ptp resync operation SKBs were poped from the fifo but were never freed neither by napi_consume nor by dev_kfree_skb_any. Add call to napi_consume_skb to properly free SKBs. Another leak was happening because mlx5e_skb_fifo_has_room() had an error in the check. Comparing free running counters works well unless C promotes the types to something wider than the counter. In this case counters are u16 but the result of the substraction is promouted to int and it causes wrong result (negative value) of the check when producer have already overlapped but consumer haven't yet. Explicit cast to u16 fixes the issue. Fixes: 58a518948f60 ("net/mlx5e: Add resiliency for PTP TX port timestamp") Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Vadim Fedorenko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-24net/mlx5e: TC, fix return value check in mlx5e_tc_act_stats_create()Yang Yingliang1-1/+1
kvzalloc() returns NULL pointer not PTR_ERR() when it fails, so replace the IS_ERR() check with NULL pointer check. Fixes: d13674b1d14c ("net/mlx5e: TC, map tc action cookie to a hw counter") Signed-off-by: Yang Yingliang <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-24net/mlx5: Remove NULL check before dev_{put, hold}Yang Li1-2/+1
The call netdev_{put, hold} of dev_{put, hold} will check NULL, so there is no need to check before using dev_{put, hold}, remove it to silence the warning： ./drivers/net/ethernet/mellanox/mlx5/core/en/rep/tc.c:714:2-9: WARNING: NULL check before dev_{put, hold} functions is not needed. Reported-by: Abaci Robot <[email protected]> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4174 Signed-off-by: Yang Li <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-23net/mlx5e: Remove hairpin write debugfs filesGal Pressman1-59/+0
Per the discussion in [1], hairpin parameters will be exposed using devlink, remove the debugfs files. [1] https://lore.kernel.org/all/[email protected]/ Signed-off-by: Gal Pressman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-23octeontx2-pf: Use correct struct reference in test conditionDeepak R Varma1-1/+1
Fix the typo/copy-paste error by replacing struct variable ah_esp_mask name by ah_esp_hdr. Issue identified using doublebitand.cocci Coccinelle semantic patch. Fixes: b7cf966126eb ("octeontx2-pf: Add flow classification using IP next level protocol") Link: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Deepak R Varma <[email protected]> Link: https://lore.kernel.org/r/Y/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-23net: sunhme: Fix region requestSean Anderson1-2/+4
devm_request_region is for I/O regions. Use devm_request_mem_region instead. This fixes the driver failing to probe since 99df45c9e0a4 ("sunhme: fix an IS_ERR() vs NULL check in probe"), which checked the result. Fixes: 914d9b2711dd ("sunhme: switch to devres") Signed-off-by: Sean Anderson <[email protected]> Reviewed-by: Pavan Chebbi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-23octeontx2-pf: Recalculate UDP checksum for ptp 1-step sync packetGeetha sowjanya1-19/+57
When checksum offload is disabled in the driver via ethtool, the PTP 1-step sync packets contain incorrect checksum, since the stack calculates the checksum before driver updates PTP timestamp field in the packet. This results in PTP packets getting dropped at the other end. This patch fixes the issue by re-calculating the UDP checksum after updating PTP timestamp field in the driver. Fixes: 2958d17a8984 ("octeontx2-pf: Add support for ptp 1-step mode on CN10K silicon") Signed-off-by: Geetha sowjanya <[email protected]> Signed-off-by: Hariprasad Kelam <[email protected]> Signed-off-by: Sunil Kovvuri Goutham <[email protected]> Signed-off-by: Sai Krishna <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-23net/mlx5: Fix memory leak in IPsec RoCE creationPatrisious Haddad1-5/+8
During IPsec RoCE TX creation a struct for the flow group creation is allocated, but never freed. Free that struct once it is no longer in use. Fixes: 22551e77e550 ("net/mlx5: Configure IPsec steering for egress RoCEv2 traffic") Signed-off-by: Patrisious Haddad <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/a69739482cca7176d3a466f87bbf5af1250b09bb.1677056384.git.leon@kernel.org Signed-off-by: Paolo Abeni <[email protected]>
2023-02-21Merge tag 'net-next-6.3' of ↵Linus Torvalds463-15059/+35904
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ...
2023-02-21Merge tag 'thermal-6.3-rc1' of ↵Linus Torvalds3-195/+55
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "The majority of changes here are related to the general switch-over to using arrays of generic trip point structures registered along with a thermal zone instead of trip point callbacks (this has been done mostly by Daniel Lezcano with some help from yours truly on the Intel drivers front). Apart from that and the related reorganization of code, there are some enhancements of the existing driver and a new Mediatek Low Voltage Thermal Sensor (LVTS) driver. The Intel powerclamp undergoes a major rework so it will use the generic idle_inject facility for CPU idle time injection going forward and it will take additional module parameters for specifying the subset of CPUs to be affected by it (work done by Srinivas Pandruvada). Also included are assorted fixes and a whole bunch of cleanups. Specifics: - Rework a large bunch of drivers to use the generic thermal trip structure and use the opportunity to do more cleanups by removing unused functions from the OF code (Daniel Lezcano) - Remove core header inclusion from drivers (Daniel Lezcano) - Fix some locking issues related to the generic thermal trip rework (Johan Hovold) - Fix a crash when requesting the critical temperature on tegra, which is related to the generic trip point work (Jon Hunter) - Clean up thermal device unregistration code (Viresh Kumar) - Fix and clean up thermal control core initialization error code paths (Daniel Lezcano) - Relocate the trip points handling code into a separate file (Daniel Lezcano) - Make the thermal core fail registration of thermal zones and cooling devices if the thermal class has not been registered (Rafael Wysocki) - Add trip point initialization helper functions for ACPI-defined trip points and modify two thermal drivers to use them (Rafael Wysocki, Daniel Lezcano) - Make the core thermal control code use sysfs_emit_at() instead of scnprintf() where applicable (ye xingchen) - Consolidate code accessing the Intel TCC (Thermal Control Circuitry) MSRs by introducing library functions for that and making the TCC-related code in thermal drivers use them (Zhang Rui) - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax changes (Zhang Rui) - Address an "unsigned expression compared with zero" warning in the intel_soc_dts_iosf thermal driver (Yang Li) - Update comments regarding two functions in the Intel Menlow thermal driver (Deming Wang) - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal driver (ye xingchen) - Make the intel_pch thermal driver support the Wellsburg PCH (Tim Zimmermann) - Modify the intel_pch and processor_thermal_device_pci thermal drivers use generic trip point tables instead of thermal zone trip point callbacks (Daniel Lezcano) - Add production mode attribute sysfs attribute to the int340x thermal driver (Srinivas Pandruvada) - Rework dynamic trip point updates handling and locking in the int340x thermal driver (Rafael Wysocki) - Make the int340x thermal driver use a generic trip points table instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel Lezcano) - Clean up and improve the int340x thermal driver (Rafael Wysocki) - Simplify and clean up the intel_pch thermal driver (Rafael Wysocki) - Fix the Intel powerclamp thermal driver and make it use the common idle injection framework (Srinivas Pandruvada) - Add two module parameters, cpumask and max_idle, to the Intel powerclamp thermal driver to allow it to affect only a specific subset of CPUs instead of all of them (Srinivas Pandruvada) - Make the Intel quark_dts thermal driver Use generic trip point objects instead of its own trip point representation (Daniel Lezcano) - Add toctree entry for thermal documents and fix two issues in the Intel powerclamp driver documentation (Bagas Sanjaya) - Use strscpy() to instead of strncpy() in the thermal core (Xu Panda) - Fix thermal_sampling_exit() (Vincent Guittot) - Add Mediatek Low Voltage Thermal Sensor (LVTS) driver (Balsam Chihi) - Add r8a779g0 RCar support to the rcar_gen3 thermal driver (Geert Uytterhoeven) - Fix useless call to set_trips() when resuming in the rcar_gen3 thermal control driver and add interrupt support detection at init time to it (Niklas Söderlund) - Fix memory corruption in the hi3660 thermal driver (Yongqin Liu) - Fix include path for libnl3 in pkg-config file for libthermal (Vibhav Pant) - Remove syscfg-based driver for st as the platform is not supported any more (Alain Volmat)" * tag 'thermal-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (135 commits) thermal/drivers/st: Remove syscfg based driver thermal: Remove core header inclusion from drivers tools/lib/thermal: Fix include path for libnl3 in pkg-config file. thermal/drivers/hisi: Drop second sensor hi3660 thermal/drivers/rcar_gen3_thermal: Fix device initialization thermal/drivers/rcar_gen3_thermal: Create device local ops struct thermal/drivers/rcar_gen3_thermal: Do not call set_trips() when resuming thermal/drivers/rcar_gen3: Add support for R-Car V4H dt-bindings: thermal: rcar-gen3-thermal: Add r8a779g0 support thermal/drivers/mediatek: Add the Low Voltage Thermal Sensor driver dt-bindings: thermal: mediatek: Add LVTS thermal controllers thermal/drivers/mediatek: Relocate driver to mediatek folder tools/lib/thermal: Fix thermal_sampling_exit() Documentation: powerclamp: Fix numbered lists formatting Documentation: powerclamp: Escape wildcard in cpumask description Documentation: admin-guide: Add toctree entry for thermal docs thermal: intel: powerclamp: Add two module parameters Documentation: admin-guide: Move intel_powerclamp documentation thermal: core: Use sysfs_emit_at() instead of scnprintf() thermal: intel: powerclamp: Fix duration module parameter ...
2023-02-21Merge tag 'hardening-v6.3-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "Beyond some specific LoadPin, UBSAN, and fortify features, there are other fixes scattered around in various subsystems where maintainers were okay with me carrying them in my tree or were non-responsive but the patches were reviewed by others: - Replace 0-length and 1-element arrays with flexible arrays in various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees Cook) - randstruct: Disable Clang 15 support (Eric Biggers) - GCC plugins: Drop -std=gnu++11 flag (Sam James) - strpbrk(): Refactor to use strchr() (Andy Shevchenko) - LoadPin LSM: Allow root filesystem switching when non-enforcing - fortify: Use dynamic object size hints when available - ext4: Fix CFI function prototype mismatch - Nouveau: Fix DP buffer size arguments - hisilicon: Wipe entire crypto DMA pool on error - coda: Fully allocate sig_inputArgs - UBSAN: Improve arm64 trap code reporting - copy_struct_from_user(): Add minimum bounds check on kernel buffer size" * tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randstruct: disable Clang 15 support uaccess: Add minimum bounds check on kernel buffer size arm64: Support Clang UBSAN trap codes for better reporting coda: Avoid partial allocation of sig_inputArgs gcc-plugins: drop -std=gnu++11 to fix GCC 13 build lib/string: Use strchr() in strpbrk() crypto: hisilicon: Wipe entire pool on error net/i40e: Replace 0-length array with flexible array io_uring: Replace 0-length array with flexible array ext4: Fix function prototype mismatch for ext4_feat_ktype i915/gvt: Replace one-element array with flexible-array member drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size LoadPin: Allow filesystem switch when not enforcing LoadPin: Move pin reporting cleanly out of locking LoadPin: Refactor sysctl initialization LoadPin: Refactor read-only check into a helper ARM: ixp4xx: Replace 0-length arrays with flexible arrays fortify: Use __builtin_dynamic_object_size() when available rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
2023-02-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-13/+13
Per-next-PR merge. net/smc/af_smc.c b5dd4d698171 ("net/smc: llc_conf_mutex refactor, replace it with rw_semaphore") e40b801b3603 ("net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-20net/mlx5e: Align IPsec ASO result memory to be as required by hardwareLeon Romanovsky1-1/+1
Hardware requires an alignment to 64 bytes to return ASO data. Missing this alignment caused to unpredictable results while ASO events were generated. Fixes: 8518d05b8f9a ("net/mlx5e: Create Advanced Steering Operation object for IPsec") Reported-by: Emeel Hakim <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/de0302c572b90c9224a72868d4e0d657b6313c4b.1676797613.git.leon@kernel.org Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-20Merge tag 'mlx5-updates-2023-02-15' of ↵Jakub Kicinski9-49/+145
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2023-02-15 1) From Gal Tariq and Parav, Few cleanups for mlx5 driver. 2) From Vlad: Allow offloading of ct 'new' match based on [1] [1] https://lore.kernel.org/netdev/[email protected]/ * tag 'mlx5-updates-2023-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: RX, Remove doubtful unlikely call net/mlx5e: Fix outdated TLS comment net/mlx5e: Remove unused function mlx5e_sq_xmit_simple net/mlx5e: Allow offloading of ct 'new' match net/mlx5e: Implement CT entry update net/mlx5: Simplify eq list traversal net/mlx5e: Remove redundant page argument in mlx5e_xdp_handle() net/mlx5e: Remove redundant page argument in mlx5e_xmit_xdp_buff() net/mlx5e: Switch to using napi_build_skb() ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-20net/mlx5e: TC, Set CT miss to the specific ct action instancePaul Blakey5-24/+82
Currently, CT misses restore the missed chain on the tc skb extension so tc will continue from the relevant chain. Instead, restore the CT action's miss cookie on the extension, which will instruct tc to continue from the this specific CT action instance on the relevant filter's action list. Map the CT action's miss_cookie to a new miss object (ACT_MISS), and use this miss mapping instead of the current chain miss object (CHAIN_MISS) for CT action misses. To restore this new miss mapping value, add a RX restore rule for each such mapping value. Signed-off-by: Paul Blakey <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Oz Sholmo <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-20net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REGPaul Blakey5-14/+14
This reg usage is always a mapped object, not necessarily containing chain info. Rename to properly convey what it stores. This patch doesn't change any functionality. Signed-off-by: Paul Blakey <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.