aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2023-10-24net: ethernet: davinci_emac: Use MAC Address from Device TreeAdam Ford1-10/+12
Currently there is a device tree entry called "local-mac-address" which can be filled by the bootloader or manually set.This is useful when the user does not want to use the MAC address programmed into the SoC. Currently, the davinci_emac reads the MAC from the DT, copies it from pdata->mac_addr to priv->mac_addr, then blindly overwrites it by reading from registers in the SoC, and falls back to a random MAC if it's still not valid. This completely ignores any MAC address in the device tree. In order to use the local-mac-address, check to see if the contents of priv->mac_addr are valid before falling back to reading from the SoC when the MAC address is not valid. Signed-off-by: Adam Ford <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-24net: ti: icssg-prueth: Add phys_port_name supportJan Kiszka1-0/+14
Helps identifying the ports in udev rules e.g. Signed-off-by: Jan Kiszka <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-24net: microchip: lan743x: improve throughput with rx timestamp configVishvambar Panth S4-2/+63
Currently all RX frames are timestamped which results in a performance penalty when timestamping is not needed. The default is now being changed to not timestamp any Rx frames (HWTSTAMP_FILTER_NONE), but support has been added to allow changing the desired RX timestamping mode (HWTSTAMP_FILTER_ALL - which was the previous setting and HWTSTAMP_FILTER_PTP_V2_EVENT are now supported) using SIOCSHWTSTAMP. All settings were tested using the hwstamp_ctl application. It is also noted that ptp4l, when started, preconfigures the device to timestamp using HWTSTAMP_FILTER_PTP_V2_EVENT, so this driver continues to work properly "out of the box". Test setup: x64 PC with LAN7430 ---> x64 PC as partner iperf3 with - Timestamp all incoming packets: - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-5.05 sec 517 MBytes 859 Mbits/sec 0 sender [ 5] 0.00-5.00 sec 515 MBytes 864 Mbits/sec receiver iperf Done. iperf3 with - Timestamp only PTP packets: - - - - - - - - - - - - - - - - - - - - - - - - - [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-5.04 sec 563 MBytes 937 Mbits/sec 0 sender [ 5] 0.00-5.00 sec 561 MBytes 941 Mbits/sec receiver Signed-off-by: Vishvambar Panth S <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-23page_pool: remove PP_FLAG_PAGE_FRAGYunsheng Lin5-9/+3
PP_FLAG_PAGE_FRAG is not really needed after pp_frag_count handling is unified and page_pool_alloc_frag() is supported in 32-bit arch with 64-bit DMA, so remove it. Signed-off-by: Yunsheng Lin <[email protected]> CC: Lorenzo Bianconi <[email protected]> CC: Alexander Duyck <[email protected]> CC: Liang Chen <[email protected]> CC: Alexander Lobakin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23idpf: cancel mailbox work in error pathPavan Kumar Linga1-0/+1
In idpf_vc_core_init, the mailbox work is queued on a mailbox workqueue but it is not cancelled on error. This results in a call trace when idpf_mbx_task tries to access the freed mailbox queue pointer. Fix it by cancelling the mailbox work in the error path. Fixes: 4930fbf419a7 ("idpf: add core init and interrupt request") Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Pavan Kumar Linga <[email protected]> Tested-by: Krishneil Singh <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23idpf: set scheduling mode for completion queueMichal Kubiak2-3/+15
The HW must be programmed differently for queue-based scheduling mode. To program the completion queue context correctly, the control plane must know the scheduling mode not only for the Tx queue, but also for the completion queue. Unfortunately, currently the driver sets the scheduling mode only for the Tx queues. Propagate the scheduling mode data for the completion queue as well when sending the queue configuration messages. Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues") Reviewed-by: Alexander Lobakin <[email protected]> Signed-off-by: Michal Kubiak <[email protected]> Reviewed-by: Alan Brady <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Krishneil Singh <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23sfc: cleanup and reduce netlink error messagesPieter Jansen van Vuuren1-19/+19
Reduce the length of netlink error messages as they are likely to be truncated anyway. Additionally, reword netlink error messages so they are more consistent with previous messages. Fixes: 9dbc8d2b9a02 ("sfc: add decrement ipv6 hop limit by offloading set hop limit actions") Fixes: 3c9561c0a5b9 ("sfc: support TC decap rules matching on enc_ip_tos") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Pieter Jansen van Vuuren <[email protected]> Reviewed-by: Edward Cree <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-23net: lan966x: remove useless code in lan966x_xtr_irq_handlerSu Hui1-1/+0
'err' is useless after break, remove this to save space and be more clear. Signed-off-by: Su Hui <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-23chtls: fix tp->rcv_tstamp initializationEric Dumazet1-1/+1
tp->rcv_tstamp should be set to tcp_jiffies, not tcp_time_stamp(). Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Eric Dumazet <[email protected]> Cc: Ayush Sawal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22net: fec: use dma_alloc_noncoherent for data cache enabled coldfireChristoph Hellwig1-10/+76
Coldfire platforms with data caches can't properly implement dma_alloc_coherent and currently just return noncoherent memory from dma_alloc_coherent. The fec driver than works around this with a flush of all caches in the receive path. Make this hack a little less bad by using the explicit dma_alloc_noncoherent API and documenting the hacky cache flushes so that the DMA API level hack can be removed. Also replace the check for CONFIG_M532x for said hack with a check for COLDFIRE && !COLDFIRE_COHERENT_DMA. While m532x is the only such platform with a fec module, this makes the code more consistent and easier to follow. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Greg Ungerer <[email protected]> Tested-by: Greg Ungerer <[email protected]>
2023-10-22bnxt_en: extend media types to supported and autoneg modesEdwin Peer1-120/+153
The current driver code does not accurately report the supported and advertised link modes. It basically always assumes the media type is copper for any particular speed. Utilize the recently added link mode mappings to accurately report fully qualified ethtool link modes for advertised and supported speeds. If the media type is known, we will report the supported link modes for that media only. If the media is not known, we will report all possible supported link modes. The user can now specify any supported link modes (including NRZ and PAM4) to advertise for autoneg. It used to only accept copper NRZ modes. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22bnxt_en: convert to linkmode_set_bit() APIEdwin Peer1-24/+24
Barring the BNXT_FW_TO_ETHTOOL speed macros, which will be removed in the next patch, update code to use the newer API. No functional change. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22bnxt_en: Refactor NRZ/PAM4 link speed related logicMichael Chan1-31/+67
Refactor some NRZ/PAM4 link speed related logic into helper functions. The NRZ and PAM4 link parameters are stored in separate structure fields. The driver logic has to check whether it is in NRZ or PAM4 mode and then use the appropriate field. Refactor this logic into helper functions for better readability. Reviewed-by: Damodharam Ammepalli <[email protected]> Reviewed-by: Ajit Khaparde <[email protected]> Reviewed-by: Andy Gospodarek <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22bnxt_en: refactor speed independent ethtool modesEdwin Peer1-38/+40
A future patch in this series will change the algorithm used to determine ethtool speed and media modes. Extract the handling of the unrelated pause, autoneg modes into an independent function. Also separate FEC handling out of bnxt_fw_to_ethtool_*_spds(). No functional change. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22bnxt_en: support lane configuration via ethtoolEdwin Peer1-7/+25
Recent kernels support changing the number of link lanes via ethtool. This is useful for determining the appropriate signal mode to use when a given link speed can be achieved using different lane configurations. Accept the ethtool lanes parameter when configuring forced speed. If there is no lanes parameter, select a default. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22bnxt_en: add infrastructure to lookup ethtool link modeEdwin Peer2-20/+258
Add infrastructure to look up the enum ethtool_link_mode_bit_indices from link information provided by the firmware. The link speed, signal mode, and media type returned by firmware will be used to look up the ethtool link mode. The immediate benefit is that once the link mode is determined, we can now use ethtool_params_from_link_mode() to fill the basic ethtool parameters including the number of lanes. Lanes will be fully supported in the next patch. Signed-off-by: Edwin Peer <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22bnxt_en: Fix invoking hwmon_notify_eventKalesh AP1-5/+11
FW sends the async event to the driver when the device temperature goes above or below the threshold values. Only notify hwmon if the temperature is increasing to the next alert level, not when it is decreasing. Cc: Guenter Roeck <[email protected]> Reviewed-by: Kashyap Desai <[email protected]> Reviewed-by: Somnath Kotur <[email protected]> Signed-off-by: Kalesh AP <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22bnxt_en: Do not call sleeping hwmon_notify_event() from NAPIKalesh AP4-9/+18
Defer hwmon_notify_event() to bnxt_sp_task() workqueue because hwmon_notify_event() can try to acquire a mutex shown in the stack trace below. Modify bnxt_event_error_report() to return true if we need to schedule bnxt_sp_task() to notify hwmon. __schedule+0x68/0x520 hwmon_notify_event+0xe8/0x114 schedule+0x60/0xe0 schedule_preempt_disabled+0x28/0x40 __mutex_lock.constprop.0+0x534/0x550 __mutex_lock_slowpath+0x18/0x20 mutex_lock+0x5c/0x70 kobject_uevent_env+0x2f4/0x3d0 kobject_uevent+0x10/0x20 hwmon_notify_event+0x94/0x114 bnxt_hwmon_notify_event+0x40/0x70 [bnxt_en] bnxt_event_error_report+0x260/0x290 [bnxt_en] bnxt_async_event_process.isra.0+0x250/0x850 [bnxt_en] bnxt_hwrm_handler.isra.0+0xc8/0x120 [bnxt_en] bnxt_poll_p5+0x150/0x350 [bnxt_en] __napi_poll+0x3c/0x210 net_rx_action+0x308/0x3b0 __do_softirq+0x120/0x3e0 Cc: Guenter Roeck <[email protected]> Fixes: a19b4801457b ("bnxt_en: Event handler for Thermal event") Signed-off-by: Kalesh AP <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-22net: chelsio: cxgb4: add an error code check in t4_load_phy_fwSu Hui1-0/+2
t4_set_params_timeout() can return -EINVAL if failed, add check for this. Signed-off-by: Su Hui <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-21octeon_ep: assert hardware structure sizesShinas Rasheed2-0/+7
Clean up structure defines related to hardware data to be asserted to fixed sizes, as padding is not allowed by hardware. Signed-off-by: Shinas Rasheed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-21net: ethernet: adi: adin1110: Fix uninitialized variableDell Jin1-1/+1
The spi_transfer struct has to have all it's fields initialized to 0 in this case, since not all of them are set before starting the transfer. Otherwise, spi_sync_transfer() will sometimes return an error. Fixes: a526a3cc9c8d ("net: ethernet: adi: adin1110: Fix SPI transfers") Signed-off-by: Dell Jin <[email protected]> Signed-off-by: Ciprian Regus <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-21net: stmmac: update MAC capabilities when tx queues are updatedMichael Sit Wei Hong1-4/+13
Upon boot up, the driver will configure the MAC capabilities based on the maximum number of tx and rx queues. When the user changes the tx queues to single queue, the MAC should be capable of supporting Half Duplex, but the driver does not update the MAC capabilities when it is configured so. Using the stmmac_reinit_queues() to check the number of tx queues and set the MAC capabilities accordingly. Fixes: 0366f7e06a6b ("net: stmmac: add ethtool support for get/set channels") Cc: <[email protected]> # 5.17+ Signed-off-by: Michael Sit Wei Hong <[email protected]> Signed-off-by: Gan, Yi Fang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-21net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OFRob Herring1-1/+1
Commit b0377116decd ("net: ethernet: Use device_get_match_data()") dropped the unconditional use of xgene_enet_of_match resulting in this warning: drivers/net/ethernet/apm/xgene/xgene_enet_main.c:2004:34: warning: unused variable 'xgene_enet_of_match' [-Wunused-const-variable] The fix is to drop of_match_ptr() which is not necessary because DT is always used for this driver (well, it could in theory support ACPI only, but CONFIG_OF is always enabled for arm64). Fixes: b0377116decd ("net: ethernet: Use device_get_match_data()") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Rob Herring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20i40e: sync next_to_clean and next_to_process for programming status descTirthendu Sarkar1-1/+8
When a programming status desc is encountered on the rx_ring, next_to_process is bumped along with cleaned_count but next_to_clean is not. This causes I40E_DESC_UNUSED() macro to misbehave resulting in overwriting whole ring with new buffers. Update next_to_clean to point to next_to_process on seeing a programming status desc if not in the middle of handling a multi-frag packet. Also, bump cleaned_count only for such case as otherwise next_to_clean buffer may be returned to hardware on reaching clean_threshold. Fixes: e9031f2da1ae ("i40e: introduce next_to_process to i40e_ring") Suggested-by: Maciej Fijalkowski <[email protected]> Reported-by: [email protected] Reported by: Solomon Peachy <[email protected]> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217678 Tested-by: [email protected] Tested by: Indrek Järve <[email protected]> Signed-off-by: Tirthendu Sarkar <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <[email protected]> Acked-by: Maciej Fijalkowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-20igc: Fix ambiguity in the ethtool advertisingSasha Neftin1-10/+25
The 'ethtool_convert_link_mode_to_legacy_u32' method does not allow us to advertise 2500M speed support and TP (twisted pair) properly. Convert to 'ethtool_link_ksettings_test_link_mode' to advertise supported speed and eliminate ambiguity. Fixes: 8c5ad0dae93c ("igc: Add ethtool support") Suggested-by: Dima Ruinskiy <[email protected]> Suggested-by: Vitaly Lifshits <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-20pds_core: add an error code check in pdsc_dl_info_getSu Hui1-0/+2
check the value of 'ret' after call 'devlink_info_version_stored_put'. Signed-off-by: Su Hui <[email protected]> Reviewed-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-20igb: Fix potential memory leak in igb_add_ethtool_nfc_entryMateusz Palczewski1-1/+5
Add check for return of igb_update_ethtool_nfc_entry so that in case of any potential errors the memory alocated for input will be freed. Fixes: 0e71def25281 ("igb: add support of RX network flow classification") Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Arpana Arland <[email protected]> (A Contingent worker at Intel) Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20treewide: Spelling fix in commentKunwu Chan1-1/+1
reques -> request Fixes: 09dde54c6a69 ("PS3: gelic: Add wireless support for PS3") Signed-off-by: Kunwu Chan <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ixgbe: fix end of loop test in ixgbe_set_vf_macvlan()Dan Carpenter1-9/+10
The list iterator in a list_for_each_entry() loop can never be NULL. If the loop exits without hitting a break then the iterator points to an offset off the list head and dereferencing it is an out of bounds access. Before we transitioned to using list_for_each_entry() loops, then it was possible for "entry" to be NULL and the comments mention this. I have updated the comments to match the new code. Fixes: c1fec890458a ("ethernet/intel: Use list_for_each_entry() helper") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20igb: Fix an end of loop testDan Carpenter1-3/+6
When we exit a list_for_each_entry() without hitting a break statement, the list iterator isn't NULL, it just point to an offset off the list_head. In that situation, it wouldn't be too surprising for entry->free to be true and we end up corrupting memory. The way to test for these is to just set a flag. Fixes: c1fec890458a ("ethernet/intel: Use list_for_each_entry() helper") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: cleanup ice_find_netlist_nodeJacob Keller1-15/+15
The ice_find_netlist_node function was introduced in commit 8a3a565ff210 ("ice: add admin commands to access cgu configuration"). Variations of this function were reviewed concurrently on both intel-wired-lan[1][2], and netdev [3][4] [1]: https://lore.kernel.org/intel-wired-lan/[email protected]/ [2]: https://lore.kernel.org/intel-wired-lan/[email protected]/ [3]: https://lore.kernel.org/netdev/[email protected]/ [4]: https://lore.kernel.org/netdev/[email protected]/ The variant I posted had a few changes due to review feedback which were never incorporated into the DPLL series: * Replace the references to ancient and long removed ICE_SUCCESS and ICE_ERR_DOES_NOT_EXIST status codes in the function comment. * Return -ENOENT instead of -ENOTBLK, as a more common way to indicate that an entry doesn't exist. * Avoid the use of memset() and use simple static initialization for the cmd variable. * Use FIELD_PREP to assign the node_type_ctx. * Remove an unnecessary local variable to keep track of rec_node_handle, just pass the node_handle pointer directly into ice_aq_get_netlist_node. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Reviewed-by: Paul Menzel <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: make ice_get_pf_c827_idx staticJacob Keller2-2/+1
The ice_get_pf_c827_idx function is only called inside of ice_ptp_hw.c, so there is no reason to export it. Mark it static and remove the declaration from ice_ptp_hw.h Signed-off-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: manage VFs MSI-X using resource trackingMichal Swiatkowski1-19/+151
Track MSI-X for VFs using bitmap, by setting and clearing bitmap during allocation and freeing. Try to linearize irqs usage for VFs, by freeing them and allocating once again. Do it only for VFs that aren't currently running. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: set MSI-X vector count on VFMichal Swiatkowski3-0/+84
Implement ops needed to set MSI-X vector count on VF. sriov_get_vf_total_msix() should return total number of MSI-X that can be used by the VFs. Return the value set by devlink resources API (pf->req_msix.vf). sriov_set_msix_vec_count() will set number of MSI-X on particular VF. Disable VF register mapping, rebuild VSI with new MSI-X and queues values and enable new VF register mapping. For best performance set number of queues equal to number of MSI-X. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: add bitmap to track VF MSI-X usageMichal Swiatkowski2-0/+11
Create a bitamp to track MSI-X usage for VFs. The bitmap has the size of total MSI-X amount on device, because at init time the amount of MSI-X used by VFs isn't known. The bitmap is used in follow up patchset to provide a block of continuous block of MSI-X indexes for each created VF. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: implement num_msix field per VFMichal Swiatkowski4-7/+14
Store the amount of MSI-X per VF instead of storing it in pf struct. It is used to calculate number of q_vectors (and queues) for VF VSI. This is necessary because with follow up changes the number of MSI-X can be different between VFs. Use it instead of using pf->vf_msix value in all cases. Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Przemek Kitszel <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: store VF's pci_dev ptr in ice_vfPrzemek Kitszel5-28/+32
Extend struct ice_vf by vfdev. Calculation of vfdev falls more nicely into ice_create_vf_entries(). Caching of vfdev enables simplification of ice_restore_all_vfs_msi_state(). Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Signed-off-by: Przemek Kitszel <[email protected]> Co-developed-by: Mateusz Polchlopek <[email protected]> Signed-off-by: Mateusz Polchlopek <[email protected]> Tested-by: Rafal Romanowski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: add drop rule matching on not active lportMichal Swiatkowski3-20/+75
Inactive LAG port should not receive any packets, as it can cause adding invalid FDBs (bridge offload). Add a drop rule matching on inactive lport in LAG. Reviewed-by: Simon Horman <[email protected]> Co-developed-by: Marcin Szycik <[email protected]> Signed-off-by: Marcin Szycik <[email protected]> Signed-off-by: Michal Swiatkowski <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20ice: remove unused ice_flow_entry fieldsPrzemek Kitszel2-7/+1
Remove ::entry and ::entry_sz fields of &ice_flow_entry, as they were never set. Suggested-by: Maciej Fijalkowski <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Przemek Kitszel <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20i40e: Fix I40E_FLAG_VF_VLAN_PRUNING valueIvan Vecera1-1/+1
Commit c87c938f62d8f1 ("i40e: Add VF VLAN pruning") added new PF flag I40E_FLAG_VF_VLAN_PRUNING but its value collides with existing I40E_FLAG_TOTAL_PORT_SHUTDOWN_ENABLED flag. Move the affected flag at the end of the flags and fix its value. Reproducer: [root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close on [root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning on [root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off [ 6323.142585] i40e 0000:02:00.0: Setting link-down-on-close not supported on this port (because total-port-shutdown is enabled) netlink error: Operation not supported [root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 vf-vlan-pruning off [root@cnb-03 ~]# ethtool --set-priv-flags enp2s0f0np0 link-down-on-close off The link-down-on-close flag cannot be modified after setting vf-vlan-pruning because vf-vlan-pruning shares the same bit with total-port-shutdown flag that prevents any modification of link-down-on-close flag. Fixes: c87c938f62d8 ("i40e: Add VF VLAN pruning") Cc: Mateusz Palczewski <[email protected]> Cc: Simon Horman <[email protected]> Signed-off-by: Ivan Vecera <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: spectrum: Set SW LAG mode on Spectrum>1Petr Machata1-0/+2
On Spectrum-2, Spectrum-3 and Spectrum-4 machines, request SW responsibility for placement of the LAG table. On Spectrum-1, some FW versions claim to support lag_mode field despite quietly ignoring any settings made to that field. Thus refrain from attempting to configure lag_mode on those systems at all. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: spectrum: Allocate LAG table when in SW LAG modePetr Machata2-11/+83
In this patch, if the LAG mode is SW, allocate the LAG table and configure SGCR to indicate where it was allocated. We use the default "DDD" (for dynamic data duplication) layout of the LAG table. In the DDD mode, the membership information for each LAG is copied in 8 PGT entries. This is done for performance reasons. The LAG table then needs to be allocated on an address aligned to 8. Deal with this by moving the LAG init ahead so that the LAG table is allocated at address 0. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: spectrum_pgt: Generalize PGT allocationPetr Machata3-23/+7
PGT blocks are allocated through the function mlxsw_sp_pgt_mid_alloc_range(). The interface assumes that the caller knows which piece of PGT exactly they want to get. That was fine while the FID code was the only client allocating blocks of PGT. However for SW-allocated LAG table, there will be an additional client: mlxsw_sp_lag_init(). The interface should therefore be changed to not require particular coordinates, but to take just the requested size, allocate the block wherever, and give back the PGT address. In this patch, change the interface accordingly. Initialize FID family's pgt_base from the result of the PGT allocation (note that mlxsw makes a copy of the family structure, so what gets initialized is not actually the global structure). Drop the now-unnecessary pgt_base initializations and the corresponding defines. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: spectrum_fid: Allocate PGT for the whole FID family in one goPetr Machata1-30/+33
PGT blocks are allocated through the function mlxsw_sp_pgt_mid_alloc_range(). The interface assumes that the caller knows which piece of PGT exactly they want to get. That was fine while the FID code was the only client allocating blocks of PGT. However for SW-allocated LAG table, there will be an additional client: mlxsw_sp_lag_init(). The interface should therefore be changed to not require particular coordinates, but to take just the requested size, allocate the block wherever, and give back the PGT address. The current FID mode has one place where PGT address can be stored: the FID family's pgt_base. The allocation scheme should therefore be changed from allocating a block per FID flood table, to allocating a block per FID family. Do just that in this patch. The per-family allocation is going to be useful for another related feature as well: the CFF mode. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: pci: Permit toggling LAG modePetr Machata2-4/+13
Add to struct mlxsw_config_profile a field lag_mode_prefer_sw for the driver to indicate that SW LAG mode should be configured if possible. Add to the PCI module code to set lag_mode as appropriate. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: core, pci: Add plumbing related to LAG modePetr Machata3-0/+24
lag_mode describes where the responsibility for LAG table placement lies: SW or FW. The bus module determines whether LAG is supported, can configure it if it is, and knows what (if any) configuration has been applied. Therefore add a bus callback to determine the configured LAG mode. Also add to core an API to query it. The LAG mode is for now kept at the default value of 0 for FW-managed. The code to actually toggle it will be added later. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: cmd: Add QUERY_FW.lag_mode_supportPetr Machata1-0/+6
Add QUERY_FW.lag_mode_support, which determines whether CONFIG_PROFILE.lag_mode is available. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: cmd: Add CONFIG_PROFILE.{set_, }lag_modePetr Machata1-0/+21
Add CONFIG_PROFILE.lag_mode, which serves for moving responsibility for placement of the LAG table from FW to SW. Whether lag_mode should be configured is determined by CONFIG_PROFILE.set_lag_mode, which also add. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: cmd: Fix omissions in CONFIG_PROFILE field names in commentsPetr Machata1-8/+8
A number of CONFIG_PROFILE fields' comments refer to a field named like cmd_mbox_config_* instead of cmd_mbox_config_profile_*. Correct these omissions. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-10-20mlxsw: reg: Add SGCR.lag_lookup_pgt_basePetr Machata1-1/+10
Add SGCR.lag_lookup_pgt_base, which is used for configuring the base address of the LAG table within the PGT table for cases when the driver is responsible for the table placement. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.