aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2014-09-19Merge branch 'master' of ↵David S. Miller5-88/+83
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-09-18 This series contains updates to ixgbe and ixgbevf. Ethan Zhao cleans up ixgbe and ixgbevf by removing bd_number from the adapter struct because it is not longer useful. Mark fixes ixgbe where if a hardware transmit timestamp is requested, an uninitialized workqueue entry may be scheduled. Added a check for a PTP clock to avoid that. Jacob provides a number of cleanups for ixgbe. Since we may call ixgbe_acquire_msix_vectors() prior to registering our netdevice, we should not use the netdevice specific printk and use e_dev_warn() instead. Similar to how ixgbevf handles acquiring MSI-X vectors, we can return an error code instead of relying on the flag being set. This makes it more clear that we have failed to setup MSI-X mode and will make it easier to consolidate MSI-X related code into a single function. In the case of disabling DCB, it is not an error since we still can function, we just have to let the user know. So use e_dev_warn() instead of e_err(). Added warnings for other features that are disabled when we are without MSI-X support. Cleanup flags that are no longer used or needed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net/mlx4_en: Add mlx4_en_get_cqe helperIdo Shamay4-4/+11
This function derives the base address of the CQE from the CQE size, and calculates the real CQE context segment in it from the factor (this is like before). Before this change the code used the factor to calculate the base address of the CQE as well. The factor indicates in which segment of the cqe stride the cqe information is located. For 32-byte strides, the segment is 0, and for 64 byte strides, the segment is 1 (bytes 32..63). Using the factor was ok as long as we had only 32 and 64 byte strides. However, with larger strides, the factor is zero, and so cannot be used to calculate the base of the CQE. The helper uses the same method of CQE buffer pulling made by all other components that reads the CQE buffer (mlx4_ib driver and libmlx4). Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net/mlx4_core: Cache line EQE size supportIdo Shamay1-11/+19
Enable mlx4 interrupt handler to work with EQE stride feature, The feature may be enabled when cache line is bigger than 64B. The EQE size will then be the cache line size, and the context segment resides in [0-31] offset. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net/mlx4_core: Enable CQE/EQE stride supportIdo Shamay4-4/+100
This feature is intended for archs having cache line larger then 64B. Since our CQE/EQEs are generally 64B in those systems, HW will write twice to the same cache line consecutively, causing pipe locks due to he hazard prevention mechanism. For elements in a cyclic buffer, writes are consecutive, so entries smaller than a cache line should be avoided, especially if they are written at a high rate. Reduce consecutive writes to same cache line in CQs/EQs, by allowing the driver to increase the distance between entries so that each will reside in a different cache line. Until the introduction of this feature, there were two types of CQE/EQE: 1. 32B stride and context in the [0-31] segment 2. 64B stride and context in the [32-63] segment This feature introduces two additional types: 3. 128B stride and context in the [0-31] segment (128B cache line) 4. 256B stride and context in the [0-31] segment (256B cache line) Modify the mlx4_core driver to query the device for the CQE/EQE cache line stride capability and to enable that capability when the host cache line size is larger than 64 bytes (supported cache lines are 128B and 256B). The mlx4 IB driver and libmlx4 need not be aware of this change. The PF context behaviour is changed to require this change in VF drivers running on such archs. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: Add a fallback multi-function mode NPAR1.5Yuval Mintz3-21/+42
When using new Multi-function modes it's possible that due to incompatible configuration management FW will fallback into an existing mode. Notice that at the moment this fallback is exactly the same as the already existing switch-independent multi-function mode, but we still use existing infrastructure to hold this information [in case some small differences will arise in the future]. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: New multi-function mode: UFPYuval Mintz6-18/+200
Add support for a new multi-function mode based on the Unified Fabric Port system specifications. Support includes configuration of: 1. Outer vlan tags. 2. Bandwidth settings. 3. Virtual link enable/disable. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19bnx2x: Changes with storage & MAC macrosDmitry Kravkov5-42/+54
Rearrange macros to query for storage-only modes in different MF environment. Improves the readibility and maintainability of the code. E.g.: - if (IS_MF_STORAGE_SD(bp) || IS_MF_FCOE_AFEX(bp)) + if (IS_MF_STORAGE_ONLY(bp)) In addition, this removes the need for bnx2x_is_valid_ether_addr(). Signed-off-by: Dmitry Kravkov <Dmitry.Kravkov@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: bcmgenet: communicate integrated PHY revision to PHY driverFlorian Fainelli3-2/+14
The integrated BCM7xxx PHY contains no useful revision information in its MII_PHYSID2 bits 3:0, that information is instead contained in the GENET hardware block. We already read the GENET 32-bit revision register, so store the integrated PHY revision in the driver private structure, and then communicate this revision value to the PHY driver by overriding the phy_flags value. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: bcmgenet: remove PHY_BRCM_100MBPS_WARFlorian Fainelli1-10/+0
Now that we have removed the need for the PHY_BRCM_100MBPS_WAR flag, we can remove it from the GENET driver and the broadcom shared header file. The PHY driver checks the PHY supported bitmask instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: fec: Workaround for imx6sx enet tx hang when enable three queuesFugang Duan1-2/+15
When enable three queues on imx6sx enet, and then do tx performance test with iperf tool, after some time running, tx hang. Found that: If uDMA is running, software set TDAR may cause tx hang. If uDMA is in idle, software set TDAR don't cause tx hang. There is a TDAR race condition for mutliQ when the software sets TDAR and the UDMA clears TDAR simultaneously or in a small window (2-4 cycles). This will cause the udma_tx and udma_tx_arbiter state machines to hang. The issue exist at i.MX6SX enet IP. So, the Workaround is checking TDAR status four time, if TDAR cleared by hardware and then write TDAR, otherwise don't set TDAR. The patch is only one Workaround for the issue ERR007885. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net:fec: increase DMA queue numberFugang Duan1-1/+1
when enable interrupt coalesce, 8 BD is not enough. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: fec: add interrupt coalescence feature supportFugang Duan2-0/+151
i.MX6 SX support interrupt coalescence feature By default, init the interrupt coalescing frame count threshold and timer threshold. Supply the ethtool interfaces as below for user tuning to improve enet performance: rx_max_coalesced_frames rx_coalesce_usecs tx_max_coalesced_frames tx_coalesce_usecs Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-19net: fec: refine error handle of parser queue number from DTFrank Li1-10/+10
check tx and rx queue seperately. fix typo, "Invalidate" and "fail". change pr_err to pr_warn. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-18ixgbe: remove IXGBE_FLAG_MSI(X)_CAPABLE flagsJacob Keller1-2/+0
They were not used, and we don't need them, so we shouldn't bother with keeping values in the flags field that could be misleading. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: add warnings for other disabled features without MSI-X supportJacob Keller1-2/+5
When we can't get MSI-X vectors, we disable a few features which require MSI-X vectors. Print warnings just like we do when disabling DCB. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: use e_dev_warn instead of netif_printkJacob Keller1-7/+5
Again, we should not be directly using netif_printk, as we have our own error print routines that we generate. In addition, instead of using an early return we can just use the else block of this one line if statement. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: use e_dev_warn instead of e_err for displaying warningJacob Keller1-2/+2
In this case, disabling DCB is not an error. We can still function, but we just have to let the user know. In addition, since we call this during probe before allocating our netdevice structure, we should use e_dev_warn instead of e_warn. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: determine vector count inside ixgbe_acquire_msix_vectorsJacob Keller1-37/+37
Our calculated v_budget doesn't matter except if we allocate MSI-X vectors. We shouldn't need to calculate this outside of the function, so don't. Instead, only calculate it once we attempt to acquire MSI-X vectors. This helps collocate all of the MSI-X vector code together. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: move msix_entries allocation into ixgbe_acquire_msix_vectorsJacob Keller1-11/+13
We already have to kfree this value if we fail, and this is only part of MSI-X mode, so we should simply allocate the value where we need it. This is cleaner, and makes it a lot more obvious why we are freeing it inside of ixgbe_acquire_msix_vectors. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: return integer from ixgbe_acquire_msix_vectorsJacob Keller1-14/+18
Similar to how ixgbevf handles acquiring MSI-X vectors, we can return an error code instead of relying on the flag being set. This makes it more clear that we have failed to setup MSI-X mode, and also will make it easier to consolidate MSI-X related code all into the single function. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: use e_dev_warn instead of netif_printkJacob Keller1-5/+5
The netif_printk relies on our netdevice structure to be registered already. We may call ixgbe_acquire_msix_vectors prior to registering our netdevice, so we should not use the netdevice specific printk. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: Do not schedule an uninitialized workqueue entryMark Rustad1-3/+4
If a hardware Tx timestamp is requested, an uninitialized workqueue entry may be scheduled, especially on an 82598 adapter. Add a check for a PTP clock to avoid that. Also only apply the unlikely to the first term of the conditional. That will make the rest of the checks be in the cold path. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbe: remove useless bd_number from adapter structEthan Zhao2-6/+0
Because bd_number is not useful anymore, so remove it from adapter struct, or if keep it, we have to fix the boards driven counter bug in ixgbe_remove() and ixgbe_probe() only for trivial debug purpose -- other output is enough. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-18ixgbevf: remove useless bd_number from struct ixgbevf_adapterEthan Zhao2-5/+0
It is useless and buggy, just remove it. Signed-off-by: Ethan Zhao <ethan.zhao@oracle.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-16net: fec: fix build error at m68k platformFrank Li1-5/+25
reproduce: wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross git checkout 4d494cdc92b3b9a0f5fb9e1560810fa27d5a0489 make.cross ARCH=m68k m5272c3_defconfig make.cross ARCH=m68k drivers/net/ethernet/freescale/fec.h:262:0: warning: "FEC_R_DES_START" redefined #define FEC_R_DES_START(X) ((X == 1) ? FEC_R_DES_START_1 : \ ^ drivers/net/ethernet/freescale/fec.h:158:0: note: this is the location of the previous definition #define FEC_R_DES_START 0x3d0 /* Receive descriptor ring */ ^ drivers/net/ethernet/freescale/fec.h:265:0: warning: "FEC_X_DES_START" redefined #define FEC_X_DES_START(X) ((X == 1) ? FEC_X_DES_START_1 : \ ... Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15net: ethernet: neterion: vxge: vxge-main.c: Cleaning up missing ↵Rickard Strandqvist1-1/+1
null-terminate in conjunction with strncpy Replacing strncpy with strlcpy to avoid strings that lacks null terminate. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15net: ethernet: freescale: fec_main.c: Cleaning up missing null-terminate in ↵Rickard Strandqvist1-2/+2
conjunction with strncpy Replacing strncpy with strlcpy to avoid strings that lacks null terminate. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15bna: use container_of to resolve bufdesc_ex from bufdescFabian Frederick2-5/+8
Use container_of instead of casting first structure member. Compiled but untested. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-15net: fec: use container_of to resolve bufdesc_ex from bufdescFabian Frederick1-2/+2
Use container_of instead of casting first structure member. ARM cross-compiled but untested. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net/macb: Add hardware revision information during probeBo Shen1-3/+3
Print the IP revision when probing. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: fec: init complete variable in early to avoid kernel dumpFugang Duan1-0/+1
Software clear the MDIO interrupt before MDIO bus access, but MAC still generate MDIO interrupt. The issue only happen on imx6slx chip. CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc1-00399-g0bcad17 #315 Backtrace: [<800121fc>] (dump_backtrace) from [<800124e0>] (show_stack+0x18/0x1c) r6:8096e534 r5:8096e534 r4:00000000 r3:00000000 [<800124c8>] (show_stack) from [<806a4c60>] (dump_stack+0x8c/0xa4) [<806a4bd4>] (dump_stack) from [<80060ab8>] (__lock_acquire+0x1814/0x1c40) r6:be078000 r5:be074000 r4:be03f6e4 r3:be078000 [<8005f2a4>] (__lock_acquire) from [<800616e0>] (lock_acquire+0x70/0x84) r10:809ada33 r9:be010600 r8:00000096 r7:00000001 r6:be074000 r5:00000000 r4:60000193 [<80061670>] (lock_acquire) from [<806abb20>] (_raw_spin_lock_irqsave+0x40/0x54) r7:00000000 r6:8005a3f8 r5:00000193 r4:be03f6d4 [<806abae0>] (_raw_spin_lock_irqsave) from [<8005a3f8>] (complete+0x1c/0x4c) r6:80950904 r5:be03f6d0 r4:be03f6d4 [<8005a3dc>] (complete) from [<8041b4c0>] (fec_enet_interrupt+0x128/0x164) r6:80950904 r5:00800000 r4:be03f000 r3:00000000 [<8041b398>] (fec_enet_interrupt) from [<8006aeac>] (handle_irq_event_percpu+0x38/0x13c) r6:00000000 r5:be01065c r4:be399e00 r3:8041b398 [<8006ae74>] (handle_irq_event_percpu) from [<8006aff4>] (handle_irq_event+0x44/0x64) r10:be03f000 r9:80989fe0 r8:00000000 r7:00000096 r6:be399e00 r5:be01065c r4:be010600 [<8006afb0>] (handle_irq_event) from [<8006e3e8>] (handle_fasteoi_irq+0xc8/0x1bc) r6:8096e764 r5:be01065c r4:be010600 r3:00000000 [<8006e320>] (handle_fasteoi_irq) from [<8006a63c>] (generic_handle_irq+0x30/0x44) r6:be074010 r5:80945e4c r4:00000096 r3:8006e320 [<8006a60c>] (generic_handle_irq) from [<8000f218>] (handle_IRQ+0x54/0xbc) r4:80950d74 r3:00000180 [<8000f1c4>] (handle_IRQ) from [<800086cc>] (gic_handle_irq+0x30/0x68) r8:be3ab478 r7:c080e100 r6:be075bd8 r5:80950eec r4:c080e10c r3:000000a0 [<8000869c>] (gic_handle_irq) from [<80013064>] (__irq_svc+0x44/0x5c) Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: fec: change FEC alignment according to i.mx6 sx requirementFugang Duan2-11/+27
i.MX6 SX change FEC alignment requirement. i.MX6 SX change internal bus from AHB to AXI. It require RX buffer must be 64 bytes alignment. And remove TX buffer alignment requirement. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net:fec: Add fsl,imx6sx-fec compatible stringsFugang Duan1-0/+2
Add compatible string "fsl,imx6sx-fec" for i.MX6SX. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: fec: add enet-avb IP supportFrank Li2-18/+51
i.MX6SX Enet-AVB support 3 tx queues, 3 rx queues. For tx queues: ring 0 -> best effort ring 1 -> Class A ring 2 -> Class B For rx queues: ring 0 -> best effort ring 1 -> receive VLAN packet with classification match ring 2 -> receive VLAN packet with classification match Add enet-avb IP multiqueue support for the driver. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net:fec: Disable enet-avb MAC instead of reset MACFugang Duan1-6/+20
For i.MX6SX enet use AXI bus, reset MAC will make system bus dead if ENET-AXI bus has pending access (AHB bus should not have such issue). So, disable enet with AVB MAC instead of reset MAC itself. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: fec: init multi queue date structureFrank Li1-113/+252
initilized all queues according to queue number get from DT file. Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Duan Fugang <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: fec: parser max queue number from dt fileFugang Duan2-1/+47
By default, the tx/rx queue number is 1, user can config the queue number at DTS file like this: fsl,num-tx-queues=<3>; fsl,num-rx-queues=<3> Since i.MX6SX enet-AVB IP support multi queues, so use multi queues interface to allocate and set up an Ethernet device. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: fec: change data structure to support multiqueueFugang Duan2-196/+400
This patch just change data structure to support multi-queue. Only 1 queue enabled. Ethernet multiqueue mechanism can improve performance in SMP system. For single hw queue, multiqueue can balance cpu loading. For multi hw queues, multiple cores can process network packets in parallel, and refer the article for the detail advantage for multiqueue: http://vger.kernel.org/~davem/davem_nyc09.pdf Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <frank.li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net:fec: add enet AVB feature macro define for imx6sxFugang Duan1-0/+16
Add enet AVB feature macro define for imx6sx. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net:fec: add enet refrence clock for i.MX 6SX chipFugang Duan2-0/+18
i.MX6sx enet has below clocks for user config: clk_ipg: ipg_clk_s, ipg_clk_mac0_s, 66Mhz clk_ahb: enet system clock, it is enet AXI clock for imx6sx. For imx6sx, it alos is the clock source of interrupt coalescing. The clock range: 200Mhz ~ 266Mhz. clk_ref: refrence clock for tx and rx. For imx6sx enet RGMII mode, the refrence clock is 125Mhz coming from internal PLL or external. In i.MX6sx-arm2 board, the clock is from internal PLL. clk_ref is optional, depends on board. clk_enet_out: The clock can be output from internal PLL. It can supply 50Mhz clock for phy. clk_enet_out is optional, depends on chip and board. clk_ptp: 1588 ts clock. It is optional, depends on chip. The patch add clk_ref to distiguish the different clocks. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: enable PCIe error reporting on VFs tooKalesh AP1-5/+3
Currently PCIe error reporting is enabled only on PFs. This patch enables this feature on VFs too as Lancer VFs support it. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: send a max of 8 EQs to be_cmd_modify_eqd() on LancerKalesh AP1-2/+21
The MODIFY_EQ_DELAY FW cmd on Lancer is supported for a max of 8 EQs per cmd. Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: fix port-type reporting in get_settingsRavikumar Nelavelli4-16/+73
Report the ethtool port-type/supported/advertising values based on the cable_type for QSFP and SFP+ interfaces. The cable_type is parsed from the transceiver data fetched from the FW. Signed-off-by: Ravikumar Nelavelli <ravikumar.nelavelli@emulex.com> Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: add ethtool "-m" option supportMark Leonard3-19/+109
This patch adds support for the dump-module-eeprom and module-info ethtool options. Signed-off-by: Mark Leonard <mark.leonard@emulex.com> Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: use v1 of SET_FLOW_CONTROL commandSuresh Reddy2-1/+7
In some configurations the FW doesn't allow changing flow control settings of a link. Unless a v1 version of the SET_FLOW_CONTROL cmd is used, the FW doesn't report an error to the driver. Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: fix RX fragment posting for jumbo framesAjit Khaparde1-7/+15
In the RX path, the driver currently consumes upto 64 (budget) packets in one NAPI sweep. When the size of the packet received is larger than a fragment size (2K), more than one fragment is consumed for each packet. As the driver currently posts a max of 64 fragments, all the consumed fragments may not be replenished. This can cause avoidable drops in RX path. This patch fixes this by posting a max(consumed_frags, 64) frags. This is done only when there are atleast 64 free slots in the RXQ. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: replace strcpy with strlcpyVasundhara Volam1-4/+6
Replace strcpy with strlcpy, as it avoids a possible buffer overflow. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13be2net: fix some log messagesVasundhara Volam3-12/+9
This patch fixes the following minor issues with log messages in be2net: 1) Period is not required at the end of log message. 2) Remove "Unknown grp5 event" logs to reduce noise. The driver can safely ignore async events from FW it's not interested in. 3) Reword a log message for better readability to say that SRIOV "is disabled" rather than "not supported". Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13net: stmmac: fix return value check in socfpga_dwmac_parse_data()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-13Merge branch 'master' of ↵David S. Miller10-383/+396
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2014-09-12 This series contains updates to e1000, ixgbe and ixgbevf. Mark provide two fixes to reduce compile warnings produce by ixgbe and ixgbevf. Alex provides two patches for ixgbe, first removes the receive buffer allocation at the end of the ixgbe_clean_rx_irq(). The reason for removing this is to avoid the extra latency introduced by the MMIO write. Second patch addresses several issues in the current ixgbe implementation of busy poll sockets. It was possible for frames to be delivered out of order if they were held in GRO, so address this by flushing the GRO buffers before releasing the q_vector back to the idle state. Also, we were having to take a spinlock on changing the state to and from idle, so to resolve this, replaced the state value with an atomic and use atomic_cmpxchg to change the value from idle, and a simple atomic set to restore it back to idle after we have acquired it. This allows us to only use a locked operation on acquiring the vector without a need for a locked operation to release it. Florian Westphal provides several patches for e1000 which does some cleanup and updating of the driver. Moved e1000_tbi_adjust_stats() so that he could make the function static. Added a helper function to deal with the tbi workaround that was located in 2 different Rx clean functions. Added a e1000_rx_buffer struct for use on receive since the transmit and receive have different requirements. Updates e1000 to use napi_gro_frags API. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.