aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2022-03-10ice: Fix race condition during interface enslaveIvan Vecera2-2/+21
Commit 5dbbbd01cbba83 ("ice: Avoid RTNL lock when re-creating auxiliary device") changes a process of re-creation of aux device so ice_plug_aux_dev() is called from ice_service_task() context. This unfortunately opens a race window that can result in dead-lock when interface has left LAG and immediately enters LAG again. Reproducer: ``` #!/bin/sh ip link add lag0 type bond mode 1 miimon 100 ip link set lag0 for n in {1..10}; do echo Cycle: $n ip link set ens7f0 master lag0 sleep 1 ip link set ens7f0 nomaster done ``` This results in: [20976.208697] Workqueue: ice ice_service_task [ice] [20976.213422] Call Trace: [20976.215871] __schedule+0x2d1/0x830 [20976.219364] schedule+0x35/0xa0 [20976.222510] schedule_preempt_disabled+0xa/0x10 [20976.227043] __mutex_lock.isra.7+0x310/0x420 [20976.235071] enum_all_gids_of_dev_cb+0x1c/0x100 [ib_core] [20976.251215] ib_enum_roce_netdev+0xa4/0xe0 [ib_core] [20976.256192] ib_cache_setup_one+0x33/0xa0 [ib_core] [20976.261079] ib_register_device+0x40d/0x580 [ib_core] [20976.266139] irdma_ib_register_device+0x129/0x250 [irdma] [20976.281409] irdma_probe+0x2c1/0x360 [irdma] [20976.285691] auxiliary_bus_probe+0x45/0x70 [20976.289790] really_probe+0x1f2/0x480 [20976.298509] driver_probe_device+0x49/0xc0 [20976.302609] bus_for_each_drv+0x79/0xc0 [20976.306448] __device_attach+0xdc/0x160 [20976.310286] bus_probe_device+0x9d/0xb0 [20976.314128] device_add+0x43c/0x890 [20976.321287] __auxiliary_device_add+0x43/0x60 [20976.325644] ice_plug_aux_dev+0xb2/0x100 [ice] [20976.330109] ice_service_task+0xd0c/0xed0 [ice] [20976.342591] process_one_work+0x1a7/0x360 [20976.350536] worker_thread+0x30/0x390 [20976.358128] kthread+0x10a/0x120 [20976.365547] ret_from_fork+0x1f/0x40 ... [20976.438030] task:ip state:D stack: 0 pid:213658 ppid:213627 flags:0x00004084 [20976.446469] Call Trace: [20976.448921] __schedule+0x2d1/0x830 [20976.452414] schedule+0x35/0xa0 [20976.455559] schedule_preempt_disabled+0xa/0x10 [20976.460090] __mutex_lock.isra.7+0x310/0x420 [20976.464364] device_del+0x36/0x3c0 [20976.467772] ice_unplug_aux_dev+0x1a/0x40 [ice] [20976.472313] ice_lag_event_handler+0x2a2/0x520 [ice] [20976.477288] notifier_call_chain+0x47/0x70 [20976.481386] __netdev_upper_dev_link+0x18b/0x280 [20976.489845] bond_enslave+0xe05/0x1790 [bonding] [20976.494475] do_setlink+0x336/0xf50 [20976.502517] __rtnl_newlink+0x529/0x8b0 [20976.543441] rtnl_newlink+0x43/0x60 [20976.546934] rtnetlink_rcv_msg+0x2b1/0x360 [20976.559238] netlink_rcv_skb+0x4c/0x120 [20976.563079] netlink_unicast+0x196/0x230 [20976.567005] netlink_sendmsg+0x204/0x3d0 [20976.570930] sock_sendmsg+0x4c/0x50 [20976.574423] ____sys_sendmsg+0x1eb/0x250 [20976.586807] ___sys_sendmsg+0x7c/0xc0 [20976.606353] __sys_sendmsg+0x57/0xa0 [20976.609930] do_syscall_64+0x5b/0x1a0 [20976.613598] entry_SYSCALL_64_after_hwframe+0x65/0xca 1. Command 'ip link ... set nomaster' causes that ice_plug_aux_dev() is called from ice_service_task() context, aux device is created and associated device->lock is taken. 2. Command 'ip link ... set master...' calls ice's notifier under RTNL lock and that notifier calls ice_unplug_aux_dev(). That function tries to take aux device->lock but this is already taken by ice_plug_aux_dev() in step 1 3. Later ice_plug_aux_dev() tries to take RTNL lock but this is already taken in step 2 4. Dead-lock The patch fixes this issue by following changes: - Bit ICE_FLAG_PLUG_AUX_DEV is kept to be set during ice_plug_aux_dev() call in ice_service_task() - The bit is checked in ice_clear_rdma_cap() and only if it is not set then ice_unplug_aux_dev() is called. If it is set (in other words plugging of aux device was requested and ice_plug_aux_dev() is potentially running) then the function only clears the bit - Once ice_plug_aux_dev() call (in ice_service_task) is finished the bit ICE_FLAG_PLUG_AUX_DEV is cleared but it is also checked whether it was already cleared by ice_clear_rdma_cap(). If so then aux device is unplugged. Signed-off-by: Ivan Vecera <[email protected]> Co-developed-by: Petr Oros <[email protected]> Signed-off-by: Petr Oros <[email protected]> Reviewed-by: Dave Ertman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10net: bcmgenet: Don't claim WOL when its not availableJeremy Linton1-0/+7
Some of the bcmgenet platforms don't correctly support WOL, yet ethtool returns: "Supports Wake-on: gsf" which is false. Ideally if there isn't a wol_irq, or there is something else that keeps the device from being able to wakeup it should display: "Supports Wake-on: d" This patch checks whether the device can wakup, before using the hard-coded supported flags. This corrects the ethtool reporting, as well as the WOL configuration because ethtool verifies that the mode is supported before attempting it. Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code") Signed-off-by: Jeremy Linton <[email protected]> Tested-by: Peter Robinson <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10net: arc_emac: Fix use after free in arc_mdio_probe()Jianglei Nie1-2/+3
If bus->state is equal to MDIOBUS_ALLOCATED, mdiobus_free(bus) will free the "bus". But bus->name is still used in the next line, which will lead to a use after free. We can fix it by putting the name in a local variable and make the bus->name point to the rodata section "name",then use the name in the error message without referring to bus to avoid the uaf. Fixes: 95b5fc03c189 ("net: arc_emac: Make use of the helper function dev_err_probe()") Signed-off-by: Jianglei Nie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10Merge tag 'mlx5-fixes-2022-03-09' of ↵Jakub Kicinski5-18/+17
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-03-09 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2022-03-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: SHAMPO, reduce TIR indication net/mlx5e: Lag, Only handle events from highest priority multipath entry net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE net/mlx5: Fix a race on command flush flow net/mlx5: Fix size field in bufferx_reg struct ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-10gianfar: ethtool: Fix refcount leak in gfar_get_ts_infoMiaoqian Lin1-0/+1
The of_find_compatible_node() function returns a node pointer with refcount incremented, We should use of_node_put() on it when done Add the missing of_node_put() to release the refcount. Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Reviewed-by: Claudiu Manoil <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-09net/mlx5e: SHAMPO, reduce TIR indicationBen Ben-Ishay2-5/+1
SHAMPO is an RQ / WQ feature, an indication was added to the TIR in the first place to enforce suitability between connected TIR and RQ, this enforcement does not exist in current the Firmware implementation and was redundant in the first place. Fixes: 83439f3c37aa ("net/mlx5e: Add HW-GRO offload") Signed-off-by: Ben Ben-Ishay <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-03-09net/mlx5e: Lag, Only handle events from highest priority multipath entryRoi Dayan1-3/+8
There could be multiple multipath entries but changing the port affinity for each one doesn't make much sense and there should be a default one. So only track the entry with lowest priority value. The commit doesn't affect existing users with a single entry. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-03-09net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLEDima Chumak1-3/+0
Only prio 1 is supported for nic mode when there is no ignore flow level support in firmware. But for switchdev mode, which supports fixed number of statically pre-allocated prios, this restriction is not relevant so it can be relaxed. Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode") Signed-off-by: Dima Chumak <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-03-09net/mlx5: Fix a race on command flush flowMoshe Shemesh1-7/+8
Fix a refcount use after free warning due to a race on command entry. Such race occurs when one of the commands releases its last refcount and frees its index and entry while another process running command flush flow takes refcount to this command entry. The process which handles commands flush may see this command as needed to be flushed if the other process released its refcount but didn't release the index yet. Fix it by adding the needed spin lock. It fixes the following warning trace: refcount_t: addition on 0; use-after-free. WARNING: CPU: 11 PID: 540311 at lib/refcount.c:25 refcount_warn_saturate+0x80/0xe0 ... RIP: 0010:refcount_warn_saturate+0x80/0xe0 ... Call Trace: <TASK> mlx5_cmd_trigger_completions+0x293/0x340 [mlx5_core] mlx5_cmd_flush+0x3a/0xf0 [mlx5_core] enter_error_state+0x44/0x80 [mlx5_core] mlx5_fw_fatal_reporter_err_work+0x37/0xe0 [mlx5_core] process_one_work+0x1be/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x141/0x160 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> Fixes: 50b2412b7e78 ("net/mlx5: Avoid possible free of command entry while timeout comp handler") Signed-off-by: Moshe Shemesh <[email protected]> Reviewed-by: Eran Ben Elisha <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-03-09net: marvell: prestera: Add missing of_node_put() in ↵Miaoqian Lin1-0/+1
prestera_switch_set_base_mac_addr This node pointer is returned by of_find_compatible_node() with refcount incremented. Calling of_node_put() to aovid the refcount leak. Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices") Signed-off-by: Miaoqian Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-09net: ethernet: lpc_eth: Handle error for clk_enableJiasheng Jiang1-1/+4
As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Jiasheng Jiang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-09net:mcf8390: Use platform_get_irq() to get the interruptMinghao Chi (CGEL ZTE)1-5/+5
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting. platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier. It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required. Reported-by: Zeal Robot <[email protected]> Signed-off-by: Minghao Chi (CGEL ZTE) <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-09net: ethernet: ti: cpts: Handle error for clk_enableJiasheng Jiang1-1/+3
As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 8a2c9a5ab4b9 ("net: ethernet: ti: cpts: rework initialization/deinitialization") Signed-off-by: Jiasheng Jiang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-09Merge branch '40GbE' of ↵David S. Miller11-101/+76
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-03-08 This series contains updates to iavf, i40e, and ice drivers. Michal ensures netdev features are properly updated to reflect VLAN changes received from PF and adds an additional flag for MSI-X reinitialization as further differentiation of reinitialization operations is needed for iavf. Jake stops disabling of VFs due to failed virtchannel responses for i40e and ice driver. Dave moves MTU event notification to the service task to prevent issues with RTNL lock for ice. Christophe Jaillet corrects an allocation to GFP_ATOMIC instead of GFP_KERNEL for ice. Jedrzej fixes the value for link speed comparison which was preventing the requested value from being set for ice. --- Note: This will conflict when merging with net-next. Resolution: diff --cc drivers/net/ethernet/intel/ice/ice.h index dc42ff92dbad,3121f9b04f59..000000000000 --- a/drivers/net/ethernet/intel/ice/ice.h +++ b/drivers/net/ethernet/intel/ice/ice.h @@@ -484,10 -481,9 +484,11 @@@ enum ice_pf_flags ICE_FLAG_LEGACY_RX, ICE_FLAG_VF_TRUE_PROMISC_ENA, ICE_FLAG_MDD_AUTO_RESET_VF, + ICE_FLAG_VF_VLAN_PRUNING, ICE_FLAG_LINK_LENIENT_MODE_ENA, ICE_FLAG_PLUG_AUX_DEV, + ICE_FLAG_MTU_CHANGED, + ICE_FLAG_GNSS, /* GNSS successfully initialized */ ICE_PF_FLAGS_NBITS /* must be last */ }; ==================== Signed-off-by: David S. Miller <[email protected]>
2022-03-08ethernet: Fix error handling in xemaclite_of_probeMiaoqian Lin1-1/+3
This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak. As the remove function do. Fixes: 5cdaaa12866e ("net: emaclite: adding MDIO and phy lib support") Signed-off-by: Miaoqian Lin <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-08ice: Fix curr_link_speed advertised speedJedrzej Jagielski1-1/+1
Change curr_link_speed advertised speed, due to link_info.link_speed is not equal phy.curr_user_speed_req. Without this patch it is impossible to set advertised speed to same as link_speed. Testing Hints: Try to set advertised speed to 25G only with 25G default link (use ethtool -s 0x80000000) Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Grzegorz Siwik <[email protected]> Signed-off-by: Jedrzej Jagielski <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08ice: Don't use GFP_KERNEL in atomic contextChristophe JAILLET1-1/+1
ice_misc_intr() is an irq handler. It should not sleep. Use GFP_ATOMIC instead of GFP_KERNEL when allocating some memory. Fixes: 348048e724a0 ("ice: Implement iidc operations") Signed-off-by: Christophe JAILLET <[email protected]> Tested-by: Leszek Kaliszczuk <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08ice: Fix error with handling of bonding MTUDave Ertman2-15/+15
When a bonded interface is destroyed, .ndo_change_mtu can be called during the tear-down process while the RTNL lock is held. This is a problem since the auxiliary driver linked to the LAN driver needs to be notified of the MTU change, and this requires grabbing a device_lock on the auxiliary_device's dev. Currently this is being attempted in the same execution context as the call to .ndo_change_mtu which is causing a dead-lock. Move the notification of the changed MTU to a separate execution context (watchdog service task) and eliminate the "before" notification. Fixes: 348048e724a0e ("ice: Implement iidc operations") Signed-off-by: Dave Ertman <[email protected]> Tested-by: Jonathan Toppins <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08ice: stop disabling VFs due to PF error responsesJacob Keller2-21/+0
The ice_vc_send_msg_to_vf function has logic to detect "failure" responses being sent to a VF. If a VF is sent more than ICE_DFLT_NUM_INVAL_MSGS_ALLOWED then the VF is marked as disabled. Almost identical logic also existed in the i40e driver. This logic was added to the ice driver in commit 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") which itself copied from the i40e implementation in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). Neither commit provides a proper explanation or justification of the check. In fact, later commits to i40e changed the logic to allow bypassing the check in some specific instances. The "logic" for this seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lack of resources, etc. Additionally, this causes the PF to log an info message for every failed VF response which may confuse users, and can spam the kernel log. This behavior is not documented as part of any requirement for our products and other operating system drivers such as the FreeBSD implementation of our drivers do not include this type of check. In fact, the change from dev_err to dev_info in i40e commit 18b7af57d9c1 ("i40e: Lower some message levels") explains that these messages typically don't actually indicate a real issue. It is quite likely that a user who hits this in practice will be very confused as the VF will be disabled without an obvious way to recover. We already have robust malicious driver detection logic using actual hardware detection mechanisms that detect and prevent invalid device usage. Remove the logic since its not a documented requirement and the behavior is not intuitive. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08i40e: stop disabling VFs due to PF error responsesJacob Keller3-59/+9
The i40e_vc_send_msg_to_vf_ex (and its wrapper i40e_vc_send_msg_to_vf) function has logic to detect "failure" responses sent to the VF. If a VF is sent more than I40E_DEFAULT_NUM_INVALID_MSGS_ALLOWED, then the VF is marked as disabled. In either case, a dev_info message is printed stating that a VF opcode failed. This logic originates from the early implementation of VF support in commit 5c3c48ac6bf5 ("i40e: implement virtual device interface"). That commit did not go far enough. The "logic" for this behavior seems to be that error responses somehow indicate a malicious VF. This is not really true. The PF might be sending an error for any number of reasons such as lacking resources, an unsupported operation, etc. This does not indicate a malicious VF. We already have a separate robust malicious VF detection which relies on hardware logic to detect and prevent a variety of behaviors. There is no justification for this behavior in the original implementation. In fact, a later commit 18b7af57d9c1 ("i40e: Lower some message levels") reduced the opcode failure message from a dev_err to a dev_info. In addition, recent commit 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") changed the logic to allow quieting it for expected failures. That commit prevented this logic from kicking in for specific circumstances. This change did not go far enough. The behavior is not documented nor is it part of any requirement for our products. Other operating systems such as the FreeBSD implementation of our driver do not include this logic. It is clear this check does not make sense, and causes problems which led to ugly workarounds. Fix this by just removing the entire logic and the need for the i40e_vc_send_msg_to_vf_ex function. Fixes: 01cbf50877e6 ("i40e: Fix to not show opcode msg on unsuccessful VF MAC change") Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Jacob Keller <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08iavf: Fix adopting new combined settingMichal Maloszewski2-4/+10
In some cases overloaded flag IAVF_FLAG_REINIT_ITR_NEEDED which should indicate that interrupts need to be completely reinitialized during reset leads to RTNL deadlocks using ethtool -C while a reset is in progress. To fix, it was added a new flag IAVF_FLAG_REINIT_MSIX_NEEDED used to trigger MSI-X reinit. New combined setting is fixed adopt after VF reset. This has been implemented by call reinit interrupt scheme during VF reset. Without this fix new combined setting has never been adopted. Fixes: 209f2f9c7181 ("iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 negotiation") Signed-off-by: Grzegorz Szczurek <[email protected]> Signed-off-by: Mitch Williams <[email protected]> Signed-off-by: Michal Maloszewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-08iavf: Fix handling of vlan strip virtual channel messagesMichal Maloszewski1-0/+40
Modify netdev->features for vlan stripping based on virtual channel messages received from the PF. Change is needed to synchronize vlan strip status between PF sysfs and iavf ethtool. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Norbert Ciosek <[email protected]> Signed-off-by: Michal Maloszewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-03-07qed: return status of qed_iov_get_linkTom Rix1-7/+11
Clang static analysis reports this issue qed_sriov.c:4727:19: warning: Assigned value is garbage or undefined ivi->max_tx_rate = tx_rate ? tx_rate : link.speed; ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ link is only sometimes set by the call to qed_iov_get_link() qed_iov_get_link fails without setting link or returning status. So change the decl to return status. Fixes: 73390ac9d82b ("qed*: support ndo_get_vf_config") Signed-off-by: Tom Rix <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-07ethernet: sun: Free the coherent when failing in probingZheyu Ma1-1/+5
When the driver fails to register net device, it should free the DMA region first, and then do other cleanup. Signed-off-by: Zheyu Ma <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-07net: lantiq_xrx200: fix use after free bugAleksander Jan Bajkowski1-1/+1
The skb->len field is read after the packet is sent to the network stack. In the meantime, skb can be freed. This patch fixes this bug. Fixes: c3e6b2c35b34 ("net: lantiq_xrx200: add ingress SG DMA support") Reported-by: Eric Dumazet <[email protected]> Signed-off-by: Aleksander Jan Bajkowski <[email protected]> Acked-by: Hauke Mehrtens <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-07net: qlogic: check the return value of dma_alloc_coherent() in ↵Jia-Ju Bai1-0/+7
qed_vf_hw_prepare() The function dma_alloc_coherent() in qed_vf_hw_prepare() can fail, so its return value should be checked. Fixes: 1408cc1fa48c ("qed: Introduce VFs") Reported-by: TOTE Robot <[email protected]> Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-04net: macb: Fix lost RX packet wakeup race in NAPI receiveRobert Hancock1-1/+24
There is an oddity in the way the RSR register flags propagate to the ISR register (and the actual interrupt output) on this hardware: it appears that RSR register bits only result in ISR being asserted if the interrupt was actually enabled at the time, so enabling interrupts with RSR bits already set doesn't trigger an interrupt to be raised. There was already a partial fix for this race in the macb_poll function where it checked for RSR bits being set and re-triggered NAPI receive. However, there was a still a race window between checking RSR and actually enabling interrupts, where a lost wakeup could happen. It's necessary to check again after enabling interrupts to see if RSR was set just prior to the interrupt being enabled, and re-trigger receive in that case. This issue was noticed in a point-to-point UDP request-response protocol which periodically saw timeouts or abnormally high response times due to received packets not being processed in a timely fashion. In many applications, more packets arriving, including TCP retransmissions, would cause the original packet to be processed, thus masking the issue. Fixes: 02f7a34f34e3 ("net: macb: Re-enable RX interrupt only when RX is done") Cc: [email protected] Co-developed-by: Scott McNutt <[email protected]> Signed-off-by: Scott McNutt <[email protected]> Signed-off-by: Robert Hancock <[email protected]> Tested-by: Claudiu Beznea <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-03ixgbe: xsk: change !netif_carrier_ok() handling in ixgbe_xmit_zc()Maciej Fijalkowski1-2/+4
Commit c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") addressed the ring transient state when MEM_TYPE_XSK_BUFF_POOL was being configured which in turn caused the interface to through down/up. Maurice reported that when carrier is not ok and xsk_pool is present on ring pair, ksoftirqd will consume 100% CPU cycles due to the constant NAPI rescheduling as ixgbe_poll() states that there is still some work to be done. To fix this, do not set work_done to false for a !netif_carrier_ok(). Fixes: c685c69fba71 ("ixgbe: don't do any AF_XDP zero-copy transmit if netif is not OK") Reported-by: Maurice Baijens <[email protected]> Tested-by: Maurice Baijens <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-03-03bnx2: Fix an error messageChristophe JAILLET1-1/+1
Fix an error message and report the correct failing function. Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-03-03sfc: extend the locking on mcdi->seqnoNiels Dossche1-1/+1
seqno could be read as a stale value outside of the lock. The lock is already acquired to protect the modification of seqno against a possible race condition. Place the reading of this value also inside this locking to protect it against a possible race condition. Signed-off-by: Niels Dossche <[email protected]> Acked-by: Martin Habets <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-28e1000e: Correct NVM checksum verification flowSasha Neftin1-2/+2
Update MAC type check e1000_pch_tgp because for e1000_pch_cnp, NVM checksum update is still possible. Emit a more detailed warning message. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1191663 Fixes: 4051f68318ca ("e1000e: Do not take care about recovery NVM checksum") Reported-by: Thomas Bogendoerfer <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-28e1000e: Fix possible HW unit hang after an s0ix exitSasha Neftin4-0/+32
Disable the OEM bit/Gig Disable/restart AN impact and disable the PHY LAN connected device (LCD) reset during power management flows. This fixes possible HW unit hangs on the s0ix exit on some corporate ADL platforms. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=214821 Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Suggested-by: Dima Ruinskiy <[email protected]> Suggested-by: Nir Efrati <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Kai-Heng Feng <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-28igc: igc_write_phy_reg_gpy: drop premature returnSasha Neftin1-2/+0
Similar to "igc_read_phy_reg_gpy: drop premature return" patch. igc_write_phy_reg_gpy checks the return value from igc_write_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Suggested-by: Dima Ruinskiy <[email protected]> Reported-by: Corinna Vinschen <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-28igc: igc_read_phy_reg_gpy: drop premature returnCorinna Vinschen1-2/+0
igc_read_phy_reg_gpy checks the return value from igc_read_phy_reg_mdic and if it's not 0, returns immediately. By doing this, it leaves the HW semaphore in the acquired state. Drop this premature return statement, the function returns after releasing the semaphore immediately anyway. Fixes: 5586838fe9ce ("igc: Add code for PHY support") Signed-off-by: Corinna Vinschen <[email protected]> Acked-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-28net: sparx5: Add #include to remove warningCasper Andersson1-0/+2
main.h uses NUM_TARGETS from main_regs.h, but the missing include never causes any errors because everywhere main.h is (currently) included, main_regs.h is included before. But since it is dependent on main_regs.h it should always be included. Signed-off-by: Casper Andersson <[email protected]> Reviewed-by: Joacim Zetterling <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25iavf: Fix __IAVF_RESETTING state usageSlawomir Laba1-7/+6
The setup of __IAVF_RESETTING state in watchdog task had no effect and could lead to slow resets in the driver as the task for __IAVF_RESETTING state only requeues watchdog. Till now the __IAVF_RESETTING was interpreted by reset task as running state which could lead to errors with allocating and resources disposal. Make watchdog_task queue the reset task when it's necessary. Do not update the state to __IAVF_RESETTING so the reset task knows exactly what is the current state of the adapter. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix missing check for running netdevSlawomir Laba1-2/+5
The driver was queueing reset_task regardless of the netdev state. Do not queue the reset task in iavf_change_mtu if netdev is not running. Fixes: fdd4044ffdc8 ("iavf: Remove timer for work triggering, use delaying work instead") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix deadlock in iavf_reset_taskSlawomir Laba1-0/+1
There exists a missing mutex_unlock call on crit_lock in iavf_reset_task call path. Unlock the crit_lock before returning from reset task. Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix race in init stateSlawomir Laba1-1/+2
When iavf_init_version_check sends VIRTCHNL_OP_GET_VF_RESOURCES message, the driver will wait for the response after requeueing the watchdog task in iavf_init_get_resources call stack. The logic is implemented this way that iavf_init_get_resources has to be called in order to allocate adapter->vf_res. It is polling for the AQ response in iavf_get_vf_config function. Expect a call trace from kernel when adminq_task worker handles this message first. adapter->vf_res will be NULL in iavf_virtchnl_completion. Make the watchdog task not queue the adminq_task if the init process is not finished yet. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix locking for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPSSlawomir Laba3-24/+23
iavf_virtchnl_completion is called under crit_lock but when the code for VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is called, this lock is released in order to obtain rtnl_lock to avoid ABBA deadlock with unregister_netdev. Along with the new way iavf_remove behaves, there exist many risks related to the lock release and attmepts to regrab it. The driver faces crashes related to races between unregister_netdev and netdev_update_features. Yet another risk is that the driver could already obtain the crit_lock in order to destroy it and iavf_virtchnl_completion could crash or block forever. Make iavf_virtchnl_completion never relock crit_lock in it's call paths. Extract rtnl_lock locking logic to the driver for unregister_netdev in order to set the netdev_registered flag inside the lock. Introduce a new flag that will inform adminq_task to perform the code from VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS right after it finishes processing messages. Guard this code with remove flags so it's never called when the driver is in remove state. Fixes: 5951a2b9812d ("iavf: Fix VLAN feature flags after VFR") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Fix init state closure on removeSlawomir Laba2-1/+27
When init states of the adapter work, the errors like lack of communication with the PF might hop in. If such events occur the driver restores previous states in order to retry initialization in a proper way. When remove task kicks in, this situation could lead to races with unregistering the netdevice as well as resources cleanup. With the commit introducing the waiting in remove for init to complete, this problem turns into an endless waiting if init never recovers from errors. Introduce __IAVF_IN_REMOVE_TASK bit to indicate that the remove thread has started. Make __IAVF_COMM_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and set the __IAVF_INIT_FAILED state and return without any action instead of trying to recover. Make __IAVF_INIT_FAILED adapter state respect the __IAVF_IN_REMOVE_TASK bit and return without any further actions. Make the loop in the remove handler break when adapter has __IAVF_INIT_FAILED state set. Fixes: 898ef1cb1cb2 ("iavf: Combine init and watchdog state machines") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Add waiting so the port is initialized in removeSlawomir Laba1-11/+16
There exist races when port is being configured and remove is triggered. unregister_netdev is not and can't be called under crit_lock mutex since it is calling ndo_stop -> iavf_close which requires this lock. Depending on init state the netdev could be still unregistered so unregister_netdev never cleans up, when shortly after that the device could become registered. Make iavf_remove wait until port finishes initialization. All critical state changes are atomic (under crit_lock). Crashes that come from iavf_reset_interrupt_capability and iavf_free_traffic_irqs should now be solved in a graceful manner. Fixes: 605ca7c5c6707 ("iavf: Fix kernel BUG in free_msi_irqs") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25iavf: Rework mutexes for better synchronisationSlawomir Laba2-31/+36
The driver used to crash in multiple spots when put to stress testing of the init, reset and remove paths. The user would experience call traces or hangs when creating, resetting, removing VFs. Depending on the machines, the call traces are happening in random spots, like reset restoring resources racing with driver remove. Make adapter->crit_lock mutex a mandatory lock for guarding the operations performed on all workqueues and functions dealing with resource allocation and disposal. Make __IAVF_REMOVE a final state of the driver respected by workqueues that shall not requeue, when they fail to obtain the crit_lock. Make the IRQ handler not to queue the new work for adminq_task when the __IAVF_REMOVE state is set. Fixes: 5ac49f3c2702 ("iavf: use mutexes for locking of critical sections") Signed-off-by: Slawomir Laba <[email protected]> Signed-off-by: Phani Burra <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-02-25net: stmmac: fix return value of __setup handlerRandy Dunlap1-3/+3
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Fixes: f3240e2811f0 ("stmmac: remove warning when compile as built-in (V2)") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: Igor Zhbanov <[email protected]> Link: lore.kernel.org/r/[email protected] Cc: Giuseppe Cavallaro <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Jose Abreu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-25net: sxgbe: fix return value of __setup handlerRandy Dunlap1-3/+3
__setup() handlers should return 1 on success, i.e., the parameter has been handled. A return of 0 causes the "option=value" string to be added to init's environment strings, polluting it. Fixes: acc18c147b22 ("net: sxgbe: add EEE(Energy Efficient Ethernet) for Samsung sxgbe") Fixes: 1edb9ca69e8a ("net: sxgbe: add basic framework for Samsung 10Gb ethernet driver") Signed-off-by: Randy Dunlap <[email protected]> Reported-by: Igor Zhbanov <[email protected]> Link: lore.kernel.org/r/[email protected] Cc: Siva Reddy <[email protected]> Cc: Girish K S <[email protected]> Cc: Byungho An <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-25net: sparx5: Fix add vlan when invalid operationCasper Andersson1-10/+10
Check if operation is valid before changing any settings in hardware. Otherwise it results in changes being made despite it not being a valid operation. Fixes: 78eab33bb68b ("net: sparx5: add vlan support") Signed-off-by: Casper Andersson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25net: chelsio: cxgb3: check the return value of pci_find_capability()Jia-Ju Bai1-0/+2
The function pci_find_capability() in t3_prep_adapter() can fail, so its return value should be checked. Fixes: 4d22de3e6cc4 ("Add support for the latest 1G/10G Chelsio adapter, T3") Reported-by: TOTE Robot <[email protected]> Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: Allow queueing resets during probeSukadev Bhattiprolu2-10/+98
We currently don't allow queuing resets when adapter is in VNIC_PROBING state - instead we throw away the reset and return EBUSY. The reasoning is probably that during ibmvnic_probe() the ibmvnic_adapter itself is being initialized so performing a reset during this time can lead us to accessing fields in the ibmvnic_adapter that are not fully initialized. A review of the code shows that all the adapter state neede to process a reset is initialized before registering the CRQ so that should no longer be a concern. Further the expectation is that if we do get a reset (transport event) during probe, the do..while() loop in ibmvnic_probe() will handle this by reinitializing the CRQ. While that is true to some extent, it is possible that the reset might occur _after_ the CRQ is registered and CRQ_INIT message was exchanged but _before_ the adapter state is set to VNIC_PROBED. As mentioned above, such a reset will be thrown away. While the client assumes that the adapter is functional, the vnic server will wait for the client to reinit the adapter. This disconnect between the two leaves the adapter down needing manual intervention. Because ibmvnic_probe() has other work to do after initializing the CRQ (such as registering the netdev at a minimum) and because the reset event can occur at any instant after the CRQ is initialized, there will always be a window between initializing the CRQ and considering the adapter ready for resets (ie state == PROBED). So rather than discarding resets during this window, allow queueing them - but only process them after the adapter is fully initialized. To do this, introduce a new completion state ->probe_done and have the reset worker thread wait on this before processing resets. This change brings up two new situations in or just after ibmvnic_probe(). First after one or more resets were queued, we encounter an error and decide to retry the initialization. At that point the queued resets are no longer relevant since we could be talking to a new vnic server. So we must purge/flush the queued resets before restarting the initialization. As a side note, since we are still in the probing stage and we have not registered the netdev, it will not be CHANGE_PARAM reset. Second this change opens up a potential race between the worker thread in __ibmvnic_reset(), the tasklet and the ibmvnic_open() due to the following sequence of events: 1. Register CRQ 2. Get transport event before CRQ_INIT completes. 3. Tasklet schedules reset: a) add rwi to list b) schedule_work() to start worker thread which runs and waits for ->probe_done. 4. ibmvnic_probe() decides to retry, purges rwi_list 5. Re-register crq and this time rest of probe succeeds - register netdev and complete(->probe_done). 6. Worker thread resumes in __ibmvnic_reset() from 3b. 7. Worker thread sets ->resetting bit 8. ibmvnic_open() comes in, notices ->resetting bit, sets state to IBMVNIC_OPEN and returns early expecting worker thread to finish the open. 9. Worker thread finds rwi_list empty and returns without opening the interface. If this happens, the ->ndo_open() call is effectively lost and the interface remains down. To address this, ensure that ->rwi_list is not empty before setting the ->resetting bit. See also comments in __ibmvnic_reset(). Fixes: 6a2fb0e99f9c ("ibmvnic: driver initialization for kdump/kexec") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: clear fop when retrying probeSukadev Bhattiprolu1-0/+5
Clear ->failover_pending flag that may have been set in the previous pass of registering CRQ. If we don't clear, a subsequent ibmvnic_open() call would be misled into thinking a failover is pending and assuming that the reset worker thread would open the adapter. If this pass of registering the CRQ succeeds (i.e there is no transport event), there wouldn't be a reset worker thread. This would leave the adapter unconfigured and require manual intervention to bring it up during boot. Fixes: 5a18e1e0c193 ("ibmvnic: Fix failover case for non-redundant configuration") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-02-25ibmvnic: init init_done_rc earlierSukadev Bhattiprolu1-5/+21
We currently initialize the ->init_done completion/return code fields before issuing a CRQ_INIT command. But if we get a transport event soon after registering the CRQ the taskslet may already have recorded the completion and error code. If we initialize here, we might overwrite/ lose that and end up issuing the CRQ_INIT only to timeout later. If that timeout happens during probe, we will leave the adapter in the DOWN state rather than retrying to register/init the CRQ. Initialize the completion before registering the CRQ so we don't lose the notification. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Sukadev Bhattiprolu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.