aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2013-10-26qlcnic: Do not force adapter to perform LRO without destination IP checkShahed Shaikh1-5/+2
Forcing adapter to perform LRO without destination IP check degrades the performance. Signed-off-by: Shahed Shaikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-24ixgbevf: bump driver versionDon Skidmore1-1/+1
Bump patch to reflect what version of the out of tree driver it has equivalent functionality with (2.11.3). Signed-off-by: Don Skidmore <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24ixgbevf: implement ethtool get/set coalesceJacob Keller3-1/+84
This patch adds support for ethtool's get_coalesce and set_coalesce command for the ixgbevf driver. This enables dynamically updating the minimum time between interrupts. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24ixgbevf: Adds function to set PSRTYPE registerDon Skidmore1-2/+16
This patch creates a new function to set PSRTYPE. This function helps lay the ground work for eventual multi queue support. Signed-off-by: Alexander Duyck <[email protected]> Signed-off-by: Don Skidmore <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24ixgbe: fix rx-usecs range checks for BQLEmil Tantilov1-3/+3
This patch resolves an issue where the logic used to detect changes in rx-usecs was incorrect and was masked by the call to ixgbe_update_rsc(). Setting rx-usecs between 0,2-9 and 1,10 and up requires a reset to allow ixgbe_configure_tx_ring() to set the correct value for TXDCTL.WTHRESH in order to avoid Tx hangs with BQL enabled. Signed-off-by: Emil Tantilov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24ixgbe: use pcie_capability_read_word() to simplify codeYijing Wang1-4/+2
use pcie_capability_read_word() to simplify code. Signed-off-by: Yijing Wang <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24ixgbe: cleanup ixgbe_enumerate_functionsJacob Keller1-8/+5
This function previously had the same check as used by the ixgbe_pcie_from_parent. As the hardcode is due to the device having an internal switch, this function should simply use the call from ixgbe_pcie_from_parent. This reduces code complexity and makes it less likely a developer will forget to update the list in the future. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24igb: fix driver reload with VF assigned to guestStefan Assmann1-21/+16
commit fa44f2f185f7f9da19d331929bb1b56c1ccd1d93 broke reloading of igb, when VFs are assigned to a guest, in several ways. 1. on module load adapter->vf_data does not get properly allocated, resulting in a null pointer exception when accessing adapter->vf_data in igb_reset() on module reload. modprobe -r igb ; modprobe igb max_vfs=7 [ 215.215837] igb 0000:01:00.1: removed PHC on eth1 [ 216.932072] igb 0000:01:00.1: IOV Disabled [ 216.937038] igb 0000:01:00.0: removed PHC on eth0 [ 217.127032] igb 0000:01:00.0: Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated [ 217.146178] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k [ 217.154050] igb: Copyright (c) 2007-2013 Intel Corporation. [ 217.160688] igb 0000:01:00.0: Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface. [ 217.173703] igb 0000:01:00.0: irq 103 for MSI/MSI-X [ 217.179227] igb 0000:01:00.0: irq 104 for MSI/MSI-X [ 217.184735] igb 0000:01:00.0: irq 105 for MSI/MSI-X [ 217.220082] BUG: unable to handle kernel NULL pointer dereference at 0000000000000048 [ 217.228846] IP: [<ffffffffa007c5e5>] igb_reset+0xc5/0x4b0 [igb] [ 217.235472] PGD 3607ec067 PUD 36170b067 PMD 0 [ 217.240461] Oops: 0002 [#1] SMP [ 217.244085] Modules linked in: igb(+) igbvf mptsas mptscsih mptbase scsi_transport_sas [last unloaded: igb] [ 217.255040] CPU: 4 PID: 4833 Comm: modprobe Not tainted 3.11.0+ #46 [...] [ 217.390007] [<ffffffffa007fab2>] igb_probe+0x892/0xfd0 [igb] [ 217.396422] [<ffffffff81470b3e>] local_pci_probe+0x1e/0x40 [ 217.402641] [<ffffffff81472029>] pci_device_probe+0xf9/0x110 [...] 2. A follow up issue, pci_enable_sriov() should only be called if no VFs were still allocated on module unload. Otherwise pci_enable_sriov() gets called multiple times in a row rendering the NIC unusable until reset. 3. simply calling igb_enable_sriov() in igb_probe_vfs() is not enough as the interrupts need to be re-setup. Switching that to igb_pci_enable_sriov(). Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Aaron Brown <[email protected]> Tested-by: Sibai Li <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24igb: Fix master/slave mode for all m88 i354 PHY'sCarolyn Wyborny1-5/+3
This patch calls code to set the master/slave mode for all m88 gen 2 PHY's. This patch also removes the call to this function for I210 devices only from the function that is not called by I210 devices. Signed-off-by: Carolyn Wyborny <[email protected]> Tested-by: Jeff Pieper <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24i40e: remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24igbvf: add missing iounmap() on error in igbvf_probe()Wei Yongjun1-1/+2
Add the missing iounmap() before return from igbvf_probe() in the error handling case. Signed-off-by: Wei Yongjun <[email protected]> Tested-by: Aaron Brown <[email protected]> Tested-by: Sibai Li <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24igbvf: integer wrapping bug setting the mtuDan Carpenter1-3/+2
If new_mtu is very large then "new_mtu + ETH_HLEN + ETH_FCS_LEN" can wrap and the check on the next line can underflow. This is one of those bugs which can be triggered by the user if you have namespaces configured. Also since this is something the user can trigger then we don't want to have dev_err() message. This is a static checker fix and I'm not sure what the impact is. Signed-off-by: Dan Carpenter <[email protected]> Tested-by: Aaron Brown <[email protected]> Tested-by: Sibai Li [email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-24of/irq: Use irq_of_parse_and_map()Thierry Reding4-8/+8
Replace some instances of of_irq_map_one()/irq_create_of_mapping() and of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map(). Signed-off-by: Thierry Reding <[email protected]> Acked-by: Rob Herring <[email protected]> [grant.likely: resolved conflicts with core code renames] Signed-off-by: Grant Likely <[email protected]>
2013-10-23net: via-rhine: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-23net: tc35815: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-23net: spider_net: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-23net: tlan: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-23net: tehuti: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-23net: niu: remove unnecessary pci_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-23net: sungem: remove unnecessary pci_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-23sh_eth: add/use RMCR.RNC bitSergei Shtylyov2-3/+6
Declare 'enum RMCR_BIT' containing the single member for the RMCR.RNC bit and replace bare numbers in the driver by this mnemonic. Suggested-by: David Miller <[email protected]> Signed-off-by: Sergei Shtylyov <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller20-332/+382
Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <[email protected]>
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds28-370/+570
Pull networking fixes from David Miller: "Sorry I let so much accumulate, I was in Buffalo and wanted a few things to cook in my tree for a while before sending to you. Anyways, it's a lot of little things as usual at this stage in the game" 1) Make bonding MAINTAINERS entry reflect reality, from Andy Gospodarek. 2) Fix accidental sock_put() on timewait mini sockets, from Eric Dumazet. 3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6 addresses, from François CACHEREUL. 4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan Carpenter. 5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric Dumazet. 6) SFC driver bug fixes from Ben Hutchings. 7) Fix TX packet scheduling wedge after channel change in ath9k driver, from Felix Fietkau. 8) Fix user after free in BPF JIT code, from Alexei Starovoitov. 9) Source address selection test is reversed in __ip_route_output_key(), fix from Jiri Benc. 10) VLAN and CAN layer mis-size netlink attributes, from Marc Kleine-Budde. 11) Fix permission checks in sysctls to use current_euid() instead of current_uid(). From Eric W Biederman. 12) IPSEC policies can go away while a timer is still pending for them, add appropriate ref-counting to fix, from Steffen Klassert. 13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth chips, from Nguyen Hong Ky and Simon Horman. 14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai. 15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama Ghorbel. 16) Fix typo in fq_change(), we were assigning "initial quantum" to "quantum". From Eric Dumazet. 17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise FQ packet scheduler does not pace those flows properly. Also from Eric Dumazet. 18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland. 19) l2tp_xmit_skb() can be called from process context, not just softirq context, so we must always make sure to BH disable around it. From Eric Dumazet. 20) On qdisc reset, we forget to purge the RB tree of SKBs in netem packet scheduler. From Stephen Hemminger. 21) Fix info leak in farsync WAN driver ioctl() handler, from Dan Carpenter and Salva Peiró. 22) Fix PHY reset and other issues in dm9000 driver, from Nikita Kiryanov and Michael Abbott. 23) When hardware can do SCTP crc32 checksums, we accidently don't disable the csum offload when IPSEC transformations have been applied. From Fan Du and Vlad Yasevich. 24) Tail loss probing in TCP leaves the socket in the wrong congestion avoidance state. From Yuchung Cheng. 25) In CPSW driver, enable NAPI before interrupts are turned on, from Markus Pargmann. 26) Integer underflow and dual-assignment in YAM hamradio driver, from Dan Carpenter. 27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must unclone it. This fixes various hard to track down crashes in drivers where the SKBs ->gso_segs was changing right from underneath the driver during TX queueing. From Eric Dumazet. 28) Fix the handling of VLAN IDs, and in particular the special IDs 0 and 4095, in the bridging layer. From Toshiaki Makita. 29) Another info leak, this time in wanxl WAN driver, from Salva Peiró. 30) Fix race in socket credential passing, from Daniel Borkmann. 31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly, from Seif Mazareeb. 32) Fix identification of fragmented frames in ipv4/ipv6 UDP Fragmentation Offload output paths, from Jiri Pirko. 33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel Elior. 34) When we removed the explicit neighbour pointer from ipv6 routes a slight regression was introduced for users such as IPVS, xt_TEE, and raw sockets. We mix up the users requested destination address with the routes assigned nexthop/gateway. From Julian Anastasov and Simon Horman. 35) Fix stack overruns in rt6_probe(), the issue is that can end up doing two full packet xmit paths at the same time when emitting neighbour discovery messages. From Hannes Frederic Sowa. 36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from Mariusz Ceier. 37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT sample, from Neal Cardwell. 38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from Steffen Klassert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter ax88179_178a: Correct the RX error definition in RX header Revert "bridge: only expire the mdb entry when query is received" tcp: initialize passive-side sk_pacing_rate after 3WHS davinci_emac.c: Fix IFF_ALLMULTI setup mac802154: correct a typo in ieee802154_alloc_device() prototype ipv6: probe routes asynchronous in rt6_probe netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper ipv6: fill rt6i_gateway with nexthop address ipv6: always prefer rt6i_gateway if present bnx2x: Set NETIF_F_HIGHDMA unconditionally bnx2x: Don't pretend during register dump bnx2x: Lock DMAE when used by statistic flow bnx2x: Prevent null pointer dereference on error flow bnx2x: Fix config when SR-IOV and iSCSI are enabled bnx2x: Fix Coalescing configuration bnx2x: Unlock VF-PF channel on MAC/VLAN config error bnx2x: Prevent an illegal pointer dereference during panic bnx2x: Fix Maximum CoS estimation for VFs drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing ...
2013-10-22Merge branch 'master' of ↵David S. Miller5-127/+146
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates This series contains updates to i40e only. Jesse provides 6 patches against i40e. First is a patch to reduce CPU utilization by reducing read-flush to read in the hot path. Next couple of patches resolve coverity issues reported by Hannes Frederic Sowa <[email protected]>. Then Jesse refactored i40e to cleanup functions which used cpu_to_xxx(foo) which caused a lot of line wrapping. Mitch provides 2 i40e patches. First fixes a panic when tx_rings[0] are not allocated, his second patch corrects a math error when assigning MSI-X vectors to VFs. The vectors-per-vf value reported by the hardware already conveniently reports one less than the actual value. Shannon provides 5 patches against i40e. His first patch corrects a number of little bugs in the error handling of irq setup, most of which ended up panicing the kernel. Next he fixes the overactive IRQ issue seen in testing and allows the use of the legacy interrupt. Shannon then provides a cleanup of the arguments declared at the beginning of each function. Then he provides a patch to make sure that there are really rings and queues before trying to dump information in them. Lastly he simplifies the code by using an already existing variable. Catherine provides an i40e patch to bump the version. v2: - Remove unneeded parenthesis in patch 3 based on feedback from Sergei Shtylyov <[email protected]> - Fix patch description for patch 11 based on feedback from Sergei Shtylyov <[email protected]> ==================== Signed-off-by: David S. Miller <[email protected]>
2013-10-22i40e: Bump versionCatherine Sullivan1-1/+1
Update the driver version. Signed-off-by: Catherine Sullivan <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: use pf_id for pf function id in qtx_ctlShannon Nelson2-3/+3
Simplify code by using an already existing variable. Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: check vsi ptrs before dumping themShannon Nelson1-16/+23
Make sure there really are rings and queues before trying to dump information in them. Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: reorder block declarations in debugfsShannon Nelson1-8/+8
This is a cleanup of the local variables declared at the beginning of each function. Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: tweaking icr0 handling for legacy irqShannon Nelson3-8/+8
Fix the overactive irq issue seen in testing and allow use of the legacy interrupt. Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: refactor fdir setup functionJesse Brandeburg1-45/+33
This function did a lot of unnecessary cpu_to_xxx(foo) and making it worse, each of these calls caused a lot of line wrapping. Fix look and feel via a refactor of this function. No functional changes. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: fix sign extension issueJesse Brandeburg1-6/+6
This is a fix for an issue reported by coverity, reported by Hannes Frederic Sowa. Signed-off-by: Jesse Brandeburg <[email protected]> CC: Hannes Frederic Sowa <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: fix use of untrusted scalar value warningJesse Brandeburg1-16/+18
This is a fix for an issue reported by coverity, reported by Hannes Frederic Sowa. I'm unable to test if this patch actually fixes the coverity reported issue, feedback is welcome. Signed-off-by: Jesse Brandeburg <[email protected]> CC: Hannes Frederic Sowa <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: clamp debugfs nvm read commandJesse Brandeburg1-3/+5
This issue was identified by the coverity checker where we were not checking the upper limit on reads, reported by Hannes Frederic Sowa. Implement more specific limits on reads (min 1k, max 4k) Signed-off-by: Jesse Brandeburg <[email protected]> CC: Hannes Frederic Sowa <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: debugfs fixupsJesse Brandeburg1-12/+26
debugfs fixes for issues found by coverity. This issue was identified by the coverity checker, reported by Hannes Frederic Sowa. Signed-off-by: Jesse Brandeburg <[email protected]> CC: Hannes Frederic Sowa <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: fixup legacy interrupt handlingShannon Nelson1-6/+12
There were a number of little bugs in the error handling of irq setup, most of which ended up panicing the kernel, and are addressed by this patch, along with a couple formatting issues. Legacy interrupts (including MSI) are used only in the case of failure to allocate MSI-X interrupts. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: assign correct vector to VFMitch Williams1-1/+1
Correct math error when assigning MSI-X vectors to VFs. The vectors-per-vf value reported by the hardware already conveniently reports one less than the actual value. Signed-off-by: Mitch Williams <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Sibai Li <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: don't free nonexistent ringsMitch Williams1-5/+6
Not all VSIs have rings! Check to see if rings were actually allocated before freeing them. This prevents a panic when tx_rings[0] is not allocated. Signed-off-by: Mitch Williams <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Sibai Li <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22i40e: do not flush after re-enabling interruptsJesse Brandeburg2-3/+2
Hot path doesn't need read-flush after interrupt enable, and this flush really causes a lot of extra cpu utilization. Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Kavindya Deegala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2013-10-22net: ksz884x: use DEFINE_PCI_DEVICE_TABLEJingoo Han1-1/+1
This macro is used to create a struct pci_device_id array. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: tulip: use DEFINE_PCI_DEVICE_TABLEJingoo Han1-1/+1
This macro is used to create a struct pci_device_id array. Signed-off-by: Jingoo Han <[email protected]> Acked-by: Grant Grundler <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: cxgb4vf: use DEFINE_PCI_DEVICE_TABLEJingoo Han1-1/+1
This macro is used to create a struct pci_device_id array. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: cassini: remove unnecessary pci_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: sunhme: remove unnecessary pci_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: stmmac: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: smsc9420: remove unnecessary pci_set_drvdata()Jingoo Han1-2/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: epic100: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: sis190: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: r8169: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: 8139too: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-10-22net: 8139cp: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.