aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2020-09-17net: hns3: optimize the rx clean processYunsheng Lin1-30/+31
Currently HNS3_RING_RX_RING_FBDNUM_REG register is read to determine how many rx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the rx desc to determine if a specific rx desc can be cleaned. The hns3 driver clear valid bit in the rx desc before notifying the rx desc to the hw, and hw will only set the valid bit of the rx desc after corresponding buffer is filled with packet data and other field in the rx desc is set accordingly. Add hns3_rx_ring_move_fw() function to clear the valid bit in the rx desc before moving rx ring's next_to_clean forward to avoid double cleaning a rx desc, also add a dma_rmb() barrier in hns3_handle_rx_bd() to make sure valid bit is set before reading other field in the rx desc. Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-17net: hns3: optimize the tx clean processYunsheng Lin3-45/+33
Currently HNS3_RING_TX_RING_HEAD_REG register is read to determine how many tx desc can be cleaned. To avoid the register read operation in the critical data path, use the valid bit in the tx desc to determine if a specific tx desc can be cleaned. The hns3 driver sets valid bit in the tx desc before ringing a doorbell to the hw, and hw will only clear the valid bit of the tx desc after corresponding packet is sent out to the wire. And because next_to_use for tx ring is a changing variable when the driver is filling the tx desc, so reuse the pull_len for rx ring to record the tx desc that has notified to the hw, so that hns3_nic_reclaim_desc() can decide how many tx desc's valid bit need checking when reclaiming tx desc. And io_err_cnt stat is also removed for it is not used anymore. Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-17net: hns3: batch tx doorbell operationYunsheng Lin3-12/+39
Use netdev_xmit_more() to defer the tx doorbell operation when the skb is passed to the driver continuously. By doing this we can improve the overall xmit performance by avoid some doorbell operations. Also, the tx_err_cnt stat is not used, so rename it to tx_more stat. Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-17net: hns3: batch the page reference count updatesYunsheng Lin2-8/+25
Batch the page reference count updates instead of doing them one at a time. By doing this we can improve the overall receive performance by avoid some atomic increment operations when the rx page is reused. Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-17RDMA/mlx5: Delete duplicated mlx5_ptys_width enumAharon Landau1-8/+0
Combine two same enums to avoid duplication. Signed-off-by: Aharon Landau <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2020-09-17net/mlx5: Refactor query port speed functionsAharon Landau2-38/+8
The functions mlx5_query_port_link_width_oper and mlx5_query_port_ib_proto_oper are always called together, so combine them to a new function called mlx5_query_port_oper to avoid duplication. And while the mlx5i_get_port_settings is the same as mlx5_query_port_oper therefore let's remove it. According to the IB spec link_width_oper and ib_proto_oper should be u16 and not as written u8, so perform casting as a preparation to cross-RDMA patch which will fix that type for all drivers in the RDMA subsystem. Fixes: ada68c31ba9c ("net/mlx5: Introduce a new header file for physical port functions") Signed-off-by: Aharon Landau <[email protected]> Reviewed-by: Michael Guralnik <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2020-09-16cxgb4vf: convert to use DEFINE_SEQ_ATTRIBUTE macroLiu Shixin1-81/+11
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Liu Shixin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16net: hns: kerneldoc fixesLu Wei1-20/+20
Fix some parameter description or spelling mistakes. Signed-off-by: Lu Wei <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16ionic: dynamic interrupt moderationShannon Nelson6-31/+112
Use the dim library to manage dynamic interrupt moderation in ionic. v3: rebase v2: untangled declarations in ionic_dim_work() Signed-off-by: Shannon Nelson <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16net: stmmac: Add support to Ethtool get/set ring parametersSong, Yoong Siang7-59/+132
This patch add support to --show-ring & --set-ring Ethtool functions: - Adding min, max, power of two check to new ring parameter's value. - Bring down the network interface before changing the value of ring parameters. - Bring up the network interface after changing the value of ring parameters. Signed-off-by: Song, Yoong Siang <[email protected]> Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum_buffers: Manage internal buffer in the hdroom codePetr Machata4-64/+113
Traffic mirroring modes that are in-chip implemented on egress need an internal buffer to work. As the only client, the SPAN module was managing the buffer so far. However logically it belongs to the buffers module. E.g. buffer size validation needs to take the size of the internal buffer into account. Therefore move the related code from SPAN to spectrum_buffers. Move over the callbacks that determine the minimum buffer size as a function of maximum speed and MTU. Add a field describing the internal buffer to struct mlxsw_sp_hdroom. Extend mlxsw_sp_hdroom_bufs_reset_sizes() to take care of sizing the internal buffer as well. Change the SPAN module to invoke that function and mlxsw_sp_hdroom_configure() like all the other hdroom clients. Drop the now-unnecessary mlxsw_sp_span_port_buffer_disable(). Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum_buffers: Introduce shared buffer opsPetr Machata3-0/+21
The size of the internal buffer is currently calculated in the SPAN module. Logically it belongs to the spectrum_buffers module, where it should be moved. However, that being a chip-specific operation, it needs dynamic dispatch. There currently is a chip-specific structure for description of shared buffer values, struct mlxsw_sp_sb_vals. However placing ops into this structure would be confusing. Therefore introduce a new per-chip structure, currently empty, and initialize the ops pointer as appropriate. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum_buffers: Convert mlxsw_sp_port_headroom_init()Petr Machata1-52/+23
Currently mlxsw_sp_port_headroom_init() configures both priomap and buffers by hand. Additionally, for port buffers, it configures buffer 0 with a size that it will never again have if PFC configuration is touched. Rewrite the init code to become a client of the new hdroom code. The only difference in invocation is that the configuration is forced, so that it is issued even if the desired configuration happens to match what is contained in (hitherto not initialized with meaningful values) mlxsw_sp_port->hdroom. Since now mlxsw_sp_port_headroom_init() initializes all the PG buffers to meaningful values, mlxsw_sp_hdroom_configure_buffers() can avoid querying the current configuration, and can fill the whole PBMC itself. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum_buffers: Inline mlxsw_sp_sb_max_headroom_cells()Petr Machata2-9/+1
This function is now only used from the buffers module, and is a trivial field reference. Just inline it and drop the related artifacts. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum_buffers: Move here the new headroom codePetr Machata2-201/+199
Move all the headroom code to the spectrum_buffers module, where it belongs. Rename mlxsw_sp_pg_buf_threshold_get() and mlxsw_sp_pg_buf_pack() to ..._hdroom_... to match the naming convention of the new headroom code. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum: Move here the three-step headroom configuration from DCBPetr Machata2-61/+61
The ETS handler performs the headroom configuration in three steps: first it resizes the buffers and adds any new ones. Then it redirects priorities to the new buffers. And finally it sets the size of the now-unused buffers to zero. This way no packet drops are introduced. This sort of careful approach will also be useful for configuring port buffer sizes and priority map by hand, through dcbnl_setbuffer. Therefore move the code from the DCB handler to the generic headroom function. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum_dcb: Convert mlxsw_sp_port_pg_prio_map() to hdroom codePetr Machata1-10/+19
The new hdroom code has certain conventions: iteration over priorities is done through a variable named `prio', configuration is not pushed unless it is dirty, but a `force' flag can be used to override this, updated configuration is written to port. Convert the function mlxsw_sp_port_pg_prio_map() to use these conventions and rename appropriately to fit in. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum_dcb: Convert ETS handler fully to mlxsw_sp_hdroom_configure()Petr Machata1-36/+6
The ETS handler performs the headroom configuration in three steps: first it resizes the buffers and adds any new ones. Then it redirects priorities to the new buffers. And finally it sets the size of the now-unused buffers to zero. This way no packet drops are introduced. Both of the buffer size configuration operations are simply buffer size configurations, there is no material difference between setting buffers to zero and any other value. Therefore simply invoke the same mlxsw_sp_hdroom_configure(), and drop mlxsw_sp_port_pg_destroy() and mlxsw_sp_ets_has_pg() which are now unused. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum: Split headroom autoresize out of buffer configurationPetr Machata4-31/+97
Split mlxsw_sp_port_headroom_set() to three functions. mlxsw_sp_hdroom_bufs_reset_sizes() changes the sizes of the individual PG buffers, and mlxsw_sp_hdroom_configure_buffers() will actually apply the configuration. A third function, mlxsw_sp_hdroom_bufs_fit(), verifies that the requested buffer configuration matches total headroom size requirements. Add wrappers, mlxsw_sp_hdroom_configure() and __..., that will eventually perform full headroom configuration, but for now, only have them verify the configured headroom size, and invoke mlxsw_sp_hdroom_configure_buffers(). Have them take the `force` argument to prepare for a later patch, even though it is currently unused. Note that the loop in mlxsw_sp_hdroom_configure_buffers() only goes through DCBX_MAX_BUFFERS. Since there is no logic to configure the control buffer, it needs to keep the values queried from the FW. Eventually this function should configure all the PGs. Note that conversion of __mlxsw_sp_dcbnl_ieee_setets() is not trivial. That function performs the headroom configuration in three steps: first it resizes the buffers and adds any new ones. Then it redirects priorities to the new buffers. And finally it sets the size of the now-unused buffers to zero. This way no packet drops are introduced. So after invoking mlxsw_sp_hdroom_bufs_reset_sizes(), tweak the configuration to keep the old sizes of PG buffers for those buffers whose size was set to zero. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum: Track buffer sizes in struct mlxsw_sp_hdroomPetr Machata2-5/+16
So far, port buffers were always autoconfigured. When dcbnl_setbuffer callback is implemented, it will allow the user to change the buffer size configuration by hand. The sizes therefore need to be a configuration parameter, not always deduced, and therefore belong to struct mlxsw_sp_hdroom, where the configuration routine should take them from. Update mlxsw_sp_port_headroom_set() to update these sizes. Have the function update the sizes even for the case that a given buffer is not used. Additionally, change the loop iteration end to DCBX_MAX_BUFFERS instead of IEEE_8021QAZ_MAX_TCS. The value is the same, but the semantics differ. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum: Track lossiness in struct mlxsw_sp_hdroomPetr Machata5-49/+64
Client-side configuration has lossiness as an attribute of a priority. Therefore add a "lossy" attribute to struct mlxsw_sp_hdroom_prio. To a Spectrum ASIC, lossiness is a feature of a port buffer. Therefore add struct mlxsw_sp_hdroom_buf, which in the following patches will get more attributes, but right now only use it to track port buffer lossiness. Instead of passing around the primary indicators of PFC and pause_en, add a function mlxsw_sp_hdroom_bufs_reset_lossiness() to compute the buffer lossiness from the priority map and priority lossiness. Change mlxsw_sp_port_headroom_set() to take the buffer lossy flag from the headroom configuration. Have the PFC and pause handlers configure priority lossiness in mlxsw_sp_hdroom, from where it will propagate. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum: Track priorities in struct mlxsw_sp_hdroomPetr Machata4-13/+35
The mapping from priorities to buffers determines which buffers should be configured. Lossiness of these priorities combined with the mapping determines whether a given buffer should be lossy. Currently this configuration is stored implicitly in DCB ETS, PFC and ethtool PAUSE configuration. Keeping it together with the rest of the headroom configuration and deriving it as needed from PFC / ETS / PAUSE will make things clearer. To that end, add a field "prios" to struct mlxsw_sp_hdroom. Previously, __mlxsw_sp_port_headroom_set() took prio_tc as an argument, and assumed that the same mapping as we use on the egress should be used on ingress as well. Instead, track this configuration at each priority, so that it can be adjusted flexibly. In the following patches, as dcbnl_setbuffer is implemented, it will need to store its own mapping, and it will also be sometimes necessary to revert back to the original ETS mapping. Therefore track two buffer indices: the one for chip configuration (buf_idx), and the source one (ets_buf_idx). Introduce a function to configure the chip-level buffer index, and for now have it simply copy the ETS mapping over to the chip mapping. Update the ETS handler to project prio_tc to the ets_buf_idx and invoke the buf_idx recomputation. Now that there is a canonical place to look for this configuration, mlxsw_sp_port_headroom_set() does not need to invent def_prio_tc to use if DCB is compiled out. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum: Track MTU in struct mlxsw_sp_hdroomPetr Machata5-20/+26
MTU influences sizes of auto-allocated buffers. Make it a part of port buffer configuration and have __mlxsw_sp_port_headroom_set() take it from there, instead of as an argument. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum: Unify delay handling between PFC and pausePetr Machata4-45/+67
When a priority is marked as lossless using DCB PFC, or when pause frames are enabled on a port, mlxsw adds to port buffers an extra space to cover the traffic that will arrive between the time that a pause or PFC frame is emitted, and the time traffic actually stops. This is called the delay. The concept is the same in PFC and pause, however the way the extra buffer space is calculated differs. In this patch, unify this handling. Delay is to be measured in bytes of extra space, and will not include MTU. PFC handler sets the delay directly from the parameter it gets through the DCB interface. To convert pause handler, move MLXSW_SP_PAUSE_DELAY to ethtool module, convert to bytes, and reduce it by maximum MTU, and divide by two. Then it has the same meaning as the delay_bytes set by the PFC handler. Keep the delay_bytes value in struct mlxsw_sp_hdroom introduced in the previous patch. Change PFC and pause handlers to store the new delay value there and have __mlxsw_sp_port_headroom_set() take it from there. Instead of mlxsw_sp_pfc_delay_get() and mlxsw_sp_pg_buf_delay_get(), introduce mlxsw_sp_hdroom_buf_delay_get() to calculate the delay provision. Drop the unnecessary MLXSW_SP_CELL_FACTOR, and instead add an explanatory comment describing the formula used. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16mlxsw: spectrum_buffers: Add struct mlxsw_sp_hdroomPetr Machata3-2/+25
The port headroom handling is currently strewn across several modules and tricky to follow: MTU, DCB PFC, DCB ETS and ethtool pause all influence the settings, and then there is the completely separate initial configuraion in spectrum_buffers. A following patch will implement the dcbnl_setbuffer callback, which is going to further complicate the landscape. In order to simplify work with port buffers, the following patches are going to centralize all port-buffer handling in spectrum_buffers. As a first step, introduce a (currently empty) struct mlxsw_sp_hdroom that will keep the configuration parameters, and allocate and free it in appropriate places. Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16Merge tag 'mlx5-updates-2020-09-15' of ↵David S. Miller11-87/+179
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-09-15 Various updates to mlx5 driver, 1) Eli adds support for TC trap action. 2) Eran, minor improvements to clock.c code structure 3) Better handling of error reporting in LAG from Jianbo 4) IPv6 traffic class (DSCP) header rewrite support from Maor 5) Ofer Levi adds support for CQE compression of multi-strides packets 6) Vu, Enables use of vport meta data by default. 7) Some minor code cleanup ==================== Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-16net/mlx5: IPsec: make spdxcheck.py happyLukas Bulwahn1-1/+1
Commit 2d64663cd559 ("net/mlx5: IPsec: Add HW crypto offload support") provided a proper SPDX license expression, but slipped in a typo. Fortunately, ./scripts/spdxcheck.py warns: drivers/net/ethernet/mellanox/mlx5/core/accel/ipsec_offload.c: 1:39 \ Invalid License ID: Linux-OpenIBt Remove the typo and make spdxcheck.py happy. Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-16net/qla3xxx: Convert to SPDX license identifiersThomas Gleixner2-4/+2
All files related to this driver contain the following notice: See LICENSE.qla3xxx for copyright and licensing details. LICENSE.qla3xxx can be found in Documentation/networking/device_drivers/qlogic/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2 or a later version). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-or-later) in the source files which reference this license file. - A license for the device firmware This license is pointless in the context of the kernel as the firmware is not distributed as part of the kernel. LICENSE.qla2xxx contained exactly the same firmware license which was removed with commit bc3f957c069f ("[SCSI] qla2xxx: Update LICENSE.qla2xxx."). The firmware license is there due to the fact that the out of tree driver tarball which was available from the qlogic website contained the firmware binary. The firmware license in the qla3xxx license file got probably forgotten when the other qlogic license files were updated. Remove the notices and add the SPDX license identifier GPL-2.0-or-later to the source files. Finally remove the now redundant LICENSE.qla3xxx file. Reviewed-by: Richard Fontana <[email protected]> Reviewed-by: Alexios Zavras <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-16net/qlcnic: Convert to SPDX license identifiersThomas Gleixner20-40/+20
All files in this driver directory contain the following notice: See LICENSE.qlcnic for copyright and licensing details. LICENSE.qlacnic can be found in Documentation/networking/device_drivers/qlogic/. The file contains: - A copyright notice This copyright notice is redundant as all files contain the same copyright notice already - A license notice You may modify and redistribute the device driver code under the GNU General Public License (a copy of which is attached hereto as Exhibit A) published by the Free Software Foundation (version 2). This can be replaced with the corresponding SPDX license identifier (GPL-2.0-only) in the source files which reference this license file. - The full GPLv2 license text A redundant copy of LICENSES/preferred/GPL-2.0 Remove the notices and add the SPDX license identifier GPL-2.0-only to the source files. Finally remove the now redundant LICENSE.qlcnic file. Reviewed-by: Richard Fontana <[email protected]> Reviewed-by: Jilayne Lovejoy <[email protected]> Reviewed-by: Alexios Zavras <[email protected]> Acked-by: Igor Russkikh <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Lukas Bulwahn <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-09-15bpf: Mutex protect used_maps array and countYiFei Zhu1-6/+12
To support modifying the used_maps array, we use a mutex to protect the use of the counter and the array. The mutex is initialized right after the prog aux is allocated, and destroyed right before prog aux is freed. This way we guarantee it's initialized for both cBPF and eBPF. Signed-off-by: YiFei Zhu <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Cc: YiFei Zhu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-09-15chelsio/chtls: Re-add dependencies on CHELSIO_T4 to fix modular CHELSIO_T4Geert Uytterhoeven1-0/+2
As CHELSIO_INLINE_CRYPTO is bool, and CHELSIO_T4 is tristate, the dependency of CHELSIO_INLINE_CRYPTO on CHELSIO_T4 is not sufficient to protect CRYPTO_DEV_CHELSIO_TLS and CHELSIO_IPSEC_INLINE. The latter two are also tristate, hence if CHELSIO_T4=n, they cannot be builtin, as that would lead to link failures like: drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_main.c:259: undefined reference to `cxgb4_port_viid' and drivers/net/ethernet/chelsio/inline_crypto/ch_ipsec/chcr_ipsec.c:752: undefined reference to `cxgb4_reclaim_completed_tx' Fix this by re-adding dependencies on CHELSIO_T4 to tristate symbols. The dependency of CHELSIO_INLINE_CRYPTO on CHELSIO_T4 is kept to avoid asking the user. Fixes: 6bd860ac1c2a0ec2 ("chelsio/chtls: CHELSIO_INLINE_CRYPTO should depend on CHELSIO_T4") Reported-by: kernel test robot <[email protected]> Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlxsw: core: Introduce fw_fatal health reporterJiri Pirko5-0/+256
Introduce devlink health reporter to report FW fatal events. Implement the event listener using MFDE trap and enable the events to be propagated using MFGD register configuration. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlxsw: reg: Add Monitoring FW General Debug RegisterJiri Pirko1-0/+21
Introduce MFGD register that is used to configure firmware debugging. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlxsw: reg: Add Monitoring FW Debug RegisterJiri Pirko1-0/+79
Introduce MFDE register that is passed through MFDE trap in case of fatal FW event. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlxsw: Move fw_load_policy devlink param into core.cJiri Pirko2-59/+51
As the fw flashing code was moved to core.c, move the param which is related to it there as well. Remove unnecessary parentheses on the way. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlxsw: core: Push code doing params register/unregister into separate helpersJiri Pirko1-12/+27
Extract the code calling params register/unregister driver ops into separate functions. Call publish/unpublish unconditionally. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlxsw: Move fw flashing code into core.cJiri Pirko4-307/+268
As the firmware flashing is not specific to Spectrum, move the code to core.c and avoid one op call and 2 exported symbols. Also, this allows to do flash before call of driver->init function and possibly do other core calls in between. Do some small renaming here and there on the way to be consistent with the rest of core.c code. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlxsw: Bump firmware version to XX.2008.1310Jiri Pirko1-6/+6
Among other changes, this version supports FW monitoring. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15net: stmmac: use netif_tx_start|stop_all_queues() functionOng Boon Leong1-32/+1
The current implementation of stmmac_stop_all_queues() and stmmac_start_all_queues() will not work correctly when the value of tx_queues_to_use is changed through ethtool -L DEVNAME rx N tx M command. Also, netif_tx_start|stop_all_queues() are only needed in driver open() and close() only. Fixes: c22a3f48 net: stmmac: adding multiple napi mechanism Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15net: stmmac: Fix incorrect location to set real_num_rx|tx_queuesAashish Verma1-4/+4
netif_set_real_num_tx_queues() & netif_set_real_num_rx_queues() should be used to inform network stack about the real Tx & Rx queue (active) number in both stmmac_open() and stmmac_resume(), therefore, we move the code from stmmac_dvr_probe() to stmmac_hw_setup(). Fixes: c02b7a914551 net: stmmac: use netif_set_real_num_{rx,tx}_queues Signed-off-by: Aashish Verma <[email protected]> Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15net: stmmac: add ethtool support for get/set channelsOng Boon Leong3-28/+93
Restructure NAPI add and delete process so that we can call them accordingly in open() and ethtool_set_channels() accordingly. Introduced stmmac_reinit_queues() to handle the transition needed for changing Rx & Tx channels accordingly. Signed-off-by: Ong Boon Leong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlx4: add pause frame statsJakub Kicinski2-0/+31
Check if the pause stats are reported by HW by checking the bitmap. Calculation is based on the order of strings in main_strings from ethtool -S. Hopefully the semantics of these stats match the standard.. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15mlx5: add pause frame statsJakub Kicinski4-0/+50
Plumb through all the indirection and copy some code from ethtool -S. The names of the group indicate that these are the stats we are after (and Saeed confirms it). v3: - fix build in mlx5_rep v2: - drop the ethool helper and call stats directly - don't pass 0 as initialized to in buffer - use local buffer Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15ixgbe: add pause frame statsJakub Kicinski1-0/+11
Report standard pause frame stats. They are already aggregated in struct ixgbe_hw_stats. The combination of the registers is suggested as equivalent to PAUSEMACCtrlFramesTransmitted / PAUSEMACCtrlFramesReceived by the Intel 82576EB datasheet, I could not find any information in the HW actually supported by ixgbe. Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Alexander Duyck <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15bnxt: add pause frame statsJakub Kicinski1-0/+17
These stats are already reported in ethtool -S. Michael confirms they are equivalent to standard stats. v2: - fix sparse warning about endian by using the macro - use u64 for pointer type Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-15net/mlx5e: Add CQE compression support for multi-strides packetsOfer Levi3-2/+22
Add CQE compression support for completions of packets that span multiple strides in a Striding RQ, per the HW capability. In our memory model, we use small strides (256B as of today) for the non-linear SKB mode. This feature allows CQE compression to work also for multiple strides packets. In this case decompressing the mini CQE array will use stride index provided by HW as part of the mini CQE. Before this feature, compression was possible only for single-strided packets, i.e. for packets of size up to 256 bytes when in non-linear mode, and the index was maintained by SW. This feature is supported for ConnectX-5 and above. Feature performance test: This was whitebox-tested, we reduced the PCI speed from 125Gb/s to 62.5Gb/s to overload pci and manipulated mlx5 driver to drop incoming packets before building the SKB to achieve low cpu utilization. Outcome is low cpu utilization and bottleneck on pci only. Test setup: Server: Intel(R) Xeon(R) Silver 4108 CPU @ 1.80GHz server, 32 cores NIC: ConnectX-6 DX. Sender side generates 300 byte packets at full pci bandwidth. Receiver side configuration: Single channel, one cpu processing with one ring allocated. Cpu utilization is ~20% while pci bandwidth is fully utilized. For the generated traffic and interface MTU of 4500B (to activate the non-linear SKB mode), packet rate improvement is about 19% from ~17.6Mpps to ~21Mpps. Without this feature, counters show no CQE compression blocks for this setup, while with the feature, counters show ~20.7Mpps compressed CQEs in ~500K compression blocks. Signed-off-by: Ofer Levi <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-09-15net/mlx5e: Add IPv6 traffic class (DSCP) header rewrite supportMaor Dickman1-0/+1
Add support for rewriting of IPV6 DSCP part of traffic class field. Next commands, for example, can be used to offload rewrite action: OVS: $ ovs-ofctl add-flow ovs-sriov "tcpv6, in_port=REP, \ actions=mod_nw_tos:68, output:NIC" iproute2: $ tc filter add dev REP ingress protocol ipv6 prio 1 flower skip_sw \ ip_proto tcp \ action pedit ex munge ip6 traffic_class set 68 retain 0xfc pipe \ action mirred egress redirect dev NIC Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-09-15net/mlx5e: Add support for tc trapEli Cohen1-0/+10
Support tc trap such that packets can explicitly be forwarded to slow path if they match a specific rule. In the example below, we want packets with src IP equals 7.7.7.8 to be forwarded to software, in which case it will get to the appropriate representor net device. $ tc filter add dev eth1 protocol ip prio 1 root flower skip_sw \ src_ip 7.7.7.8 action trap Signed-off-by: Eli Cohen <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Ariel Levkovich <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-09-15net/mlx5: E-Switch, Use vport metadata matching by defaultVu Pham1-14/+2
Multiple features use metadata matching such as bond vport in live migration, multi-port RoCE mode, stacked devices; hence, enable vport metadata matching by default. Fixes: 1e62e222db2e ("net/mlx5: E-Switch, Use vport metadata matching only when mandatory") Signed-off-by: Vu Pham <[email protected]> Reviewed-by: Bodong Wang <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Parav Pandit <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Reviewed-by: Oz Shlomo <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2020-09-15net/mlx5: E-Switch, Setup all vports' metadata to support peer miss ruleVu Pham1-9/+42
In merged eswitch configuration, peer miss rule is setup for all vports. If metadata is enabled, peer miss rule with metadata matching will be configured instead of source port matching; however, some vports that have not yet been enabled don't have default_metadata setup and their default_metadata will be zero. Hence, setup/cleanup default metadata for all vports when eswitch moves in/out of offloads mode. Fixes: 133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match") Signed-off-by: Vu Pham <[email protected]> Reviewed-by: Bodong Wang <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.