aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2017-08-24net/mlx5e: make mlx5e_profile constBhumika Goyal1-1/+1
Make this const as it is only passed as an argument to the function mlx5e_create_netdev and the corresponding argument is of type const. Signed-off-by: Bhumika Goyal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24net/mlx4_core: make mlx4_profile constBhumika Goyal1-2/+2
Make these const as they are only used in a copy operation. Signed-off-by: Bhumika Goyal <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24ixgbe: use return codes from ndo_xdp_xmit that are distinguishableJesper Dangaard Brouer1-2/+2
For XDP_REDIRECT the use of return code -EINVAL is confusing, as it is used in three different cases. (1) When the index or ifindex lookup fails, and in the ixgbe driver (2) when link is down and (3) when XDP have not been enabled. The return code can be picked up by the tracepoint xdp:xdp_redirect for diagnosing why XDP_REDIRECT isn't working. Thus, there is a need different return codes to tell the issues apart. I'm considering using a specific err-code scheme for XDP_REDIRECT instead of using these errno codes. Signed-off-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24mlxsw: spectrum_dpipe: Add support for controlling neighbor countersArkadi Sharshevsky3-0/+49
Add support for controlling neighbor counters via dpipe. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24mlxsw: spectrum_dpipe: Add support for IPv4 host table dumpArkadi Sharshevsky1-0/+247
Add support for IPv4 host table dump. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24mlxsw: spectrum_router: Add support for setting counters on neighborsArkadi Sharshevsky4-2/+71
Add support for setting counters on neighbors based on dpipe's host table counter status. This patch also adds the ability for getting the counter value, which will be used by the dpipe host table implementation in the next patches. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24mlxsw: reg: Make flow counter set type enum to be sharedArkadi Sharshevsky2-12/+12
This is done as a preparation before introducing support for neighbor counters. The flow counter's type enum is used by many registers, yet, until now it was used only by mgpc and thus it was private. This patch updates the namespace for more generic usage. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24mlxsw: spectrum_dpipe: Add IPv4 host table initial supportArkadi Sharshevsky2-0/+103
Add IPv4 host table initial support. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24mlxsw: spectrum_dpipe: Fix label nameArkadi Sharshevsky1-2/+2
Change label name for case of erif table init failure. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24mlxsw: spectrum_router: Add helpers for neighbor accessArkadi Sharshevsky2-0/+49
This is done as a preparation before introducing the ability to dump the host table via dpipe, and to count the table size. The mlxsw's neighbor representative struct stays private to the router module. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24devlink: Move dpipe entry clear function into devlinkArkadi Sharshevsky1-22/+2
The entry clear routine can be shared between the drivers, thus it is moved inside devlink. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24devlink: Add support for dynamic table sizeArkadi Sharshevsky1-4/+9
Up until now the dpipe table's size was static and known at registration time. The host table does not have constant size and it is resized in dynamic manner. In order to support this behavior the size is changed to be obtained dynamically via an op. This patch also adjust the current dpipe table for the new API. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24mlxsw: spectrum_dpipe: Fix erif table op name spaceArkadi Sharshevsky1-5/+5
Fix ERIF's table operations name space. Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-24net/mlx5: Add tracepointsMatan Barak5-2/+558
Add a tracepoint infrastructure for mlx5_core driver. Implemented flow steering tracepoints: 1. Add flow group 2. Remove flow group 3. Add flow table entry 4. Remove flow table entry 5. Add flow table rule 6. Remove flow table rule Signed-off-by: Matan Barak <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2017-08-24net/mlx5: Add hash table for flow groups in flow tableMatan Barak2-37/+152
When adding a flow table entry (fte) to a flow table (ft), we first need to find its flow group (fg). Currently, this is done by traversing a linear list of all flow groups in the flow table. Furthermore, since multiple flow groups which correspond to the same fte mask may exist in the same ft, we can't just stop at the first match. Converting the linear list to rhltable in order to speed things up. The last four patches increases the steering rules update rate by a factor of more than 7 (for insertion of 50K steering rules). Signed-off-by: Matan Barak <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2017-08-24net/mlx5: Add hash table to search FTEs in a flow-groupMatan Barak2-71/+160
When adding a flow table entry (fte) to a flow group (fg), we first need to check whether this fte exist. In such a case we just merge the destinations (if possible). Currently, this is done by traversing the fte list available in a fg. This could take a lot of time when using large flow groups. Speeding this up by using rhashtable, which is much faster. Signed-off-by: Matan Barak <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2017-08-24net/mlx5: Don't store reserved part in FTEs and FGsMatan Barak3-11/+15
The current code stores fte_match_param in the software representation of FTEs and FGs. fte_match_param contains a large reserved area at the bottom of the struct. Since downstream patches are going to hash this part, we would like to avoid doing so on a reserved part. Signed-off-by: Matan Barak <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2017-08-24net/mlx5: Convert linear search for free index to idaMatan Barak2-38/+20
When allocating a flow table entry, we need to allocate a free index in the flow group. Currently, this is done by traversing the existing flow table entries in the flow group, until a free index is found. Replacing this by using a ida, which allows us to find a free index much faster. Signed-off-by: Matan Barak <[email protected]> Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2017-08-24net/mlx5e: Fix wrong code indentation in conditional statementGal Pressman1-2/+2
Fix the following checkpatch warning in en_ethtool.c: WARNING: suspect code indent for conditional statements (8, 9) + for (i = 0; i < NUM_PCIE_PERF_STALL_COUNTERS(priv); i++) + strcpy(data + (idx++) * ETH_GSTRING_LEN, Signed-off-by: Gal Pressman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2017-08-24net/mlx5: Add a blank line after declarations V2Saeed Mahameed1-1/+1
The blank line should be after u32 val = ... and not after __be32 __iomem *addr = ... Fixes: ad5b39a95c83 ("net/mlx5: Add a blank line after declarations") Signed-off-by: Saeed Mahameed <[email protected]> Reported-by: Joe Perches <[email protected]>
2017-08-23bnxt_en: Do not setup MAC address in bnxt_hwrm_func_qcaps().Michael Chan1-12/+28
bnxt_hwrm_func_qcaps() is called during probe to get all device resources and it also sets up the factory MAC address. The same function is called when SRIOV is disabled to reclaim all resources. If the MAC address has been overridden by a user administered MAC address, calling this function will overwrite it. Separate the logic that sets up the default MAC address into a new function bnxt_init_mac_addr() that is only called during probe time. Fixes: 4a21b49b34c0 ("bnxt_en: Improve VF resource accounting.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23bnxt_en: Free MSIX vectors when unregistering the device from bnxt_re.Michael Chan1-0/+2
Take back ownership of the MSIX vectors when unregistering the device from bnxt_re. Fixes: a588e4580a7e ("bnxt_en: Add interface to support RDMA driver.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23bnxt_en: Fix .ndo_setup_tc() to include XDP rings.Michael Chan1-0/+1
When the number of TX rings is changed in bnxt_setup_tc(), we need to include the XDP rings in the total TX ring count. Fixes: 38413406277f ("bnxt_en: Add support for XDP_TX action.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23nfp: TX time stamp packets before HW doorbell is rungJakub Kicinski1-2/+2
TX completion may happen any time after HW queue was kicked. We can't access the skb afterwards. Move the time stamping before ringing the doorbell. Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23net: hinic: make functions set_ctrl0 and set_ctrl1 staticColin Ian King1-2/+2
The functions set_ctrl0 and set_ctrl1 are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'set_ctrl0' was not declared. Should it be static? symbol 'set_ctrl1' was not declared. Should it be static? Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23mlxsw: spectrum_flower: Offload goto_chain termination actionJiri Pirko1-4/+19
If action is gact goto_chain, offload it to HW by jumping to another ruleset. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23mlxsw: spectrum_acl: Provide helper to lookup rulesetJiri Pirko2-8/+41
We need to lookup ruleset in order to offload goto_chain termination action. This patch adds it. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23mlxsw: spectrum_acl: Allow to get group_id value for a rulesetJiri Pirko3-0/+24
For goto_chain action we need to know group_id of a ruleset to jump to. Provide infrastructure in order to get it. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23mlxsw: spectrum: Offload multichain TC rulesJiri Pirko4-15/+25
Reflect chain index coming down from TC core and create a ruleset per chain. Note that only chain 0, being the implicit chain, is bound to the device for processing. The rest of chains have to be "jumped-to" by actions. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23net: mvpp2: software tso supportAntoine Ténart1-14/+157
The patch uses the tso API to implement the tso functionality in Marvell PPv2 driver. Using iperf and 10G ports, using TSO shows a significant performance improvement by a factor 2 to reach around 9.5Gbps in TX; as well as a significant CPU usage drop (from 25% to 15%). Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23net: mvpp2: unify the txq size define useAntoine Ténart1-6/+5
The txq size is defined by MVPP2_AGGR_TXQ_SIZE, which is sometime not used directly but through variables. As it is a fixed value use the define everywhere in the driver. Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23net: define the TSO header size in net/tso.hAntoine Ténart4-7/+0
The TSO header size was defined in many drivers. Factorize the code and define its size in net/tso.h. Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23nfp: avoid buffer leak when representor is missingJakub Kicinski1-5/+5
When driver receives a muxed frame, but it can't find the representor netdev it is destined to it will try to "drop" that frame, i.e. reuse the buffer. The issue is that the replacement buffer has already been allocated at this point, and reusing the buffer from received frame will leak it. Change the code to put the new buffer on the ring earlier and not reuse the old buffer (make the buffer parameter to nfp_net_rx_drop() a NULL). Fixes: 91bf82ca9eed ("nfp: add support for tx/rx with metadata portid") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23nfp: make sure representors are destroyed before their lower netdevJakub Kicinski1-8/+14
App start/stop callbacks can perform application initialization. Unfortunately, flower app started using them for creating and destroying representors. This can lead to a situation where lower vNIC netdev is destroyed while representors still try to pass traffic. This will most likely lead to a NULL-dereference on the lower netdev TX path. Move the start/stop callbacks, so that representors are created/ destroyed when vNICs are fully initialized. Fixes: 5de73ee46704 ("nfp: general representor implementation") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23nfp: don't hold PF lock while enabling SR-IOVJakub Kicinski1-9/+7
Enabling SR-IOV VFs will cause the PCI subsystem to schedule a work and flush its workqueue. Since the nfp driver schedules its own work we can't enable VFs while holding driver load. Commit 6d48ceb27af1 ("nfp: allocate a private workqueue for driver work") tried to avoid this deadlock by creating a separate workqueue. Unfortunately, due to the architecture of workqueue subsystem this does not guarantee a separate thread of execution. Luckily we can simply take pci_enable_sriov() from under the driver lock. Take pci_disable_sriov() from under the lock too for symmetry. Fixes: 6d48ceb27af1 ("nfp: allocate a private workqueue for driver work") Signed-off-by: Jakub Kicinski <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23liquidio: change manner of detecting whether or not NIC firmware is loadedFelix Manlunas3-9/+15
In the NIC firmware, the 1-bit flag indicating "firmware is loaded" moved from SLI_SCRATCH_1 to SLI_SCRATCH_2 (these are Octeon general-purpose scratch registers). Make the PF driver conform to this change. Remove code that sets the "firmware is loaded" flag because it's now the firmware's job to do that. In the code that detects whether or not the firmware is loaded, don't just rely on checking the "firmware is loaded" flag because that may cause a rare false negative. Add code that deduces whether or not the firmware is loaded; that will never give a false negative. Also bump up driver version to match newer NIC firmware. Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: Derek Chickles <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-23net: stmmac: socfgpa: Ensure emac bit set in sys manager for MII/GMII/SGMII.Stephan Gatzka1-1/+4
When using MII/GMII/SGMII in the Altera SoC, the phy needs to be wired through the FPGA. To ensure correct behavior, the appropriate bit in the System Manager FPGA Interface Group register needs to be set. Signed-off-by: Stephan Gatzka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22fsl/man: Inherit parent device and of_nodeFlorian Fainelli1-0/+2
Junote Cai reported that he was not able to get a DSA setup involving the Freescale DPAA/FMAN driver to work and narrowed it down to of_find_net_device_by_node(). This function requires the network device's device reference to be correctly set which is the case here, though we have lost any device_node association there. The problem is that dpaa_eth_add_device() allocates a "dpaa-ethernet" platform device, and later on dpaa_eth_probe() is called but SET_NETDEV_DEV() won't be propagating &pdev->dev.of_node properly. Fix this by inherenting both the parent device and the of_node when dpaa_eth_add_device() creates the platform device. Fixes: 3933961682a3 ("fsl/fman: Add FMan MAC driver") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: amd: constify zorro_device_idArvind Yadav2-2/+2
zorro_device_id are not supposed to change at runtime. All functions working with zorro_device_id provided by <linux/zorro.h> work with const zorro_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: mvpp2: initialize the GoPAntoine Ténart1-0/+170
The patch adds GoP (group of ports) initialization functions. The mvpp2 driver was relying on the firmware/bootloader initialization; this patch moves this setup to the mvpp2 driver. Signed-off-by: Antoine Tenart <[email protected]> Tested-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: mvpp2: set maximum packet size for 10G portsStefan Chulski1-2/+22
Set maximum packet size for XLG 10G ports. Missing maximum packet size for XLG configuration will cause kernel panic if oversized packet is received by port. Signed-off-by: Stefan Chulski <[email protected]> Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: mvpp2: initialize the XLG MAC when using a portAntoine Ténart1-0/+25
This adds a routine to initialize the XLG MAC at the port level when using a port and the XAUI/10GKR interface mode. This wasn't done until this commit, and the mvpp2 driver was relying on the bootloader/firmware initialization. This doesn't mean everything is configured in the mvpp2 driver now, but it helps reducing the gap. Signed-off-by: Antoine Tenart <[email protected]> Tested-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: mvpp2: initialize the GMAC when using a portAntoine Ténart1-25/+98
This adds a routine to initialize the GMAC at the port level when using a port. This wasn't done until this commit, and the mvpp2 driver was relying on the bootloader/firmware initialization. This doesn't mean everything is configured in the mvpp2 driver now, but it helps reducing the gap. Signed-off-by: Antoine Tenart <[email protected]> Tested-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: mvpp2: move the mii configuration in the ndo_open pathAntoine Ténart1-1/+1
This moves the mii configuration in the ndo_open path, to allow handling different mii configurations later and to switch between these configurations at runtime. Signed-off-by: Antoine Tenart <[email protected]> Tested-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: mvpp2: fix the synchronization module bypass macro nameAntoine Ténart1-2/+2
The macro defining the bit to toggle to bypass or not the synchronization module is wrongly named. Writing 1 will disable bypass. This patch s/MVPP22_CTRL4_SYNC_BYPASS/MVPP22_CTRL4_SYNC_BYPASS_DIS/. Signed-off-by: Antoine Tenart <[email protected]> Tested-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: mvpp2: unify register definitions coding styleAntoine Ténart1-44/+44
Cosmetic patch to use the same formatting rules on all register definitions. Signed-off-by: Antoine Tenart <[email protected]> Tested-by: Marcin Wojtas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22mlxsw: spectrum_switchdev: Fix mrouter flag updateNogah Frankel1-4/+11
Update the value of the mrouter flag in struct mlxsw_sp_bridge_port when it is being changed. Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Signed-off-by: Nogah Frankel <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: ethernet: freescale: fs_enet: make mdiobb_ops constBhumika Goyal1-1/+1
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by: Bhumika Goyal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: ethernet: ax88796: make mdiobb_ops constBhumika Goyal1-1/+1
Make this const as it is only stored in a const field of a mdiobb_ctrl structure. Signed-off-by: Bhumika Goyal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-22net: ftgmac100: Fix oops in probe on failure to find associated PHYAndrew Jeffery1-1/+0
netif_napi_del() should be paired with netif_napi_add(), however no such call takes place in ftgmac100_probe(). This triggers a NULL pointer dereference if e.g. no PHY is found by the MDIO probe: [ 2.770000] libphy: Fixed MDIO Bus: probed [ 2.770000] ftgmac100 1e660000.ethernet: Generated random MAC address 66:58:c0:5a:50:b8 [ 2.790000] libphy: ftgmac100_mdio: probed [ 2.790000] ftgmac100 1e660000.ethernet (unnamed net_device) (uninitialized): eth%d: no PHY found [ 2.790000] ftgmac100 1e660000.ethernet: MII Probe failed! [ 2.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000004 [ 2.810000] pgd = 80004000 [ 2.810000] [00000004] *pgd=00000000 [ 2.810000] Internal error: Oops: 805 [#1] ARM [ 2.810000] CPU: 0 PID: 1 Comm: swapper Not tainted 4.10.17-1a4df30c39cf5ee0e3d2528c409787ccbb4a672a #1 [ 2.810000] Hardware name: ASpeed SoC [ 2.810000] task: 9e421b60 task.stack: 9e4a0000 [ 2.810000] PC is at netif_napi_del+0x74/0xa4 [ 2.810000] LR is at ftgmac100_probe+0x290/0x674 [ 2.810000] pc : [<80331004>] lr : [<80292b30>] psr: 60000013 [ 2.810000] sp : 9e4a1d70 ip : 9e4a1d88 fp : 9e4a1d84 [ 2.810000] r10: 9e565000 r9 : ffffffed r8 : 00000007 [ 2.810000] r7 : 9e565480 r6 : 9ec072c0 r5 : 00000000 r4 : 9e5654d8 [ 2.810000] r3 : 9e565530 r2 : 00000000 r1 : 00000000 r0 : 9e5654d8 [ 2.810000] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 2.810000] Control: 00c5387d Table: 80004008 DAC: 00000055 [ 2.810000] Process swapper (pid: 1, stack limit = 0x9e4a0188) [ 2.810000] Stack: (0x9e4a1d70 to 0x9e4a2000) [ 2.810000] 1d60: 9e565000 9e549e10 9e4a1dcc 9e4a1d88 [ 2.810000] 1d80: 80292b30 80330f9c ffffffff 9e4a1d98 80146058 9ec072c0 00009e10 00000000 [ 2.810000] 1da0: 9e549e18 9e549e10 ffffffed 805f81f4 fffffdfb 00000000 00000000 00000000 [ 2.810000] 1dc0: 9e4a1dec 9e4a1dd0 80243df8 802928ac 9e549e10 8062cbd8 8062cbe0 805f81f4 [ 2.810000] 1de0: 9e4a1e24 9e4a1df0 80242178 80243da4 803001d0 802ffa60 9e4a1e24 9e549e10 [ 2.810000] 1e00: 9e549e44 805f81f4 00000000 00000000 805b8840 8058a6b0 9e4a1e44 9e4a1e28 [ 2.810000] 1e20: 80242434 80241f04 00000000 805f81f4 80242344 00000000 9e4a1e6c 9e4a1e48 [ 2.810000] 1e40: 80240148 80242350 9e425bac 9e4fdc90 9e790e94 805f81f4 9e790e60 805f5640 [ 2.810000] 1e60: 9e4a1e7c 9e4a1e70 802425dc 802400d8 9e4a1ea4 9e4a1e80 80240ba8 802425c0 [ 2.810000] 1e80: 8050b6ac 9e4a1e90 805f81f4 ffffe000 805b8838 80616720 9e4a1ebc 9e4a1ea8 [ 2.810000] 1ea0: 80243068 80240a68 805ab24c ffffe000 9e4a1ecc 9e4a1ec0 80244a38 80242fec [ 2.810000] 1ec0: 9e4a1edc 9e4a1ed0 805ab264 80244a04 9e4a1f4c 9e4a1ee0 8058ae70 805ab258 [ 2.810000] 1ee0: 80032c68 801e3fd8 8052f800 8041af2c 9e4a1f4c 9e4a1f00 80032f90 8058a6bc [ 2.810000] 1f00: 9e4a1f2c 9e4a1f10 00000006 00000006 00000000 8052f220 805112f0 00000000 [ 2.810000] 1f20: 9e4a1f4c 00000006 80616720 805cf400 80616720 805b8838 80616720 00000057 [ 2.810000] 1f40: 9e4a1f94 9e4a1f50 8058b040 8058add0 00000006 00000006 00000000 8058a6b0 [ 2.810000] 1f60: 3940bf3d 00000007 f115c2e8 00000000 803fd158 00000000 00000000 00000000 [ 2.810000] 1f80: 00000000 00000000 9e4a1fac 9e4a1f98 803fd170 8058af38 00000000 803fd158 [ 2.810000] 1fa0: 00000000 9e4a1fb0 8000a5e8 803fd164 00000000 00000000 00000000 00000000 [ 2.810000] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.810000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d11dcae8 af8ddec5 [ 2.810000] [<80331004>] (netif_napi_del) from [<80292b30>] (ftgmac100_probe+0x290/0x674) [ 2.810000] [<80292b30>] (ftgmac100_probe) from [<80243df8>] (platform_drv_probe+0x60/0xc0) [ 2.810000] [<80243df8>] (platform_drv_probe) from [<80242178>] (driver_probe_device+0x280/0x44c) [ 2.810000] [<80242178>] (driver_probe_device) from [<80242434>] (__driver_attach+0xf0/0x104) [ 2.810000] [<80242434>] (__driver_attach) from [<80240148>] (bus_for_each_dev+0x7c/0xb0) [ 2.810000] [<80240148>] (bus_for_each_dev) from [<802425dc>] (driver_attach+0x28/0x30) [ 2.810000] [<802425dc>] (driver_attach) from [<80240ba8>] (bus_add_driver+0x14c/0x268) [ 2.810000] [<80240ba8>] (bus_add_driver) from [<80243068>] (driver_register+0x88/0x104) [ 2.810000] [<80243068>] (driver_register) from [<80244a38>] (__platform_driver_register+0x40/0x54) [ 2.810000] [<80244a38>] (__platform_driver_register) from [<805ab264>] (ftgmac100_driver_init+0x18/0x20) [ 2.810000] [<805ab264>] (ftgmac100_driver_init) from [<8058ae70>] (do_one_initcall+0xac/0x168) [ 2.810000] [<8058ae70>] (do_one_initcall) from [<8058b040>] (kernel_init_freeable+0x114/0x1cc) [ 2.810000] [<8058b040>] (kernel_init_freeable) from [<803fd170>] (kernel_init+0x18/0x104) [ 2.810000] [<803fd170>] (kernel_init) from [<8000a5e8>] (ret_from_fork+0x14/0x2c) [ 2.810000] Code: e594205c e5941058 e2843058 e3a05000 (e5812004) [ 3.210000] ---[ end trace f32811052fd3860c ]--- Signed-off-by: Andrew Jeffery <[email protected]> Acked-by: Benjamin Herrenschmidt <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.