aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2017-08-29net: bcmgenet: Do not return from void functionFlorian Fainelli1-1/+1
A stray return was added in the macro bcmgenet_##name##_writel where it should not, drop it. Reported-by: kbuild test robot <[email protected]> Fixes: 69d2ea9c7989 ("net: bcmgenet: Use correct I/O accessors") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29drivers: net: xgene: Correct probe sequence handlingQuan Nguyen1-14/+13
The phy is connected at early stage of probe but not properly disconnected if error occurs. This patch fixes the issue. Also changing the return type of xgene_enet_check_phy_handle(), since this function always returns success. Signed-off-by: Quan Nguyen <[email protected]> Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net: bcmgenet: Use correct I/O accessorsFlorian Fainelli2-30/+58
The GENET driver currently uses __raw_{read,write}l which means native I/O endian. This works correctly for an ARM LE kernel (default) but fails miserably on an ARM BE (BE8) kernel where registers are kept little endian, so replace uses with {read,write}l_relaxed here which is what we want because this is all performance sensitive code. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29liquidio: show NIC's U-Boot version in a dev_info() messageWeilin Chang1-0/+78
Signed-off-by: Weilin Chang <[email protected]> Signed-off-by: Felix Manlunas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29nfp: double free on error in probeDan Carpenter1-3/+1
Both the nfp_net_pf_app_start() and the nfp_net_pci_probe() functions call nfp_net_pf_app_stop_ctrl(pf) so there is a double free. The free should be done from the probe function because it's allocated there so I have removed the call from nfp_net_pf_app_start(). Fixes: 02082701b974 ("nfp: create control vNICs and wire up rx/tx") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29amd-xgbe: Interrupt summary bits are h/w version dependentTom Lendacky2-5/+16
There is a difference in the bit position of the normal interrupt summary enable (NIE) and abnormal interrupt summary enable (AIE) between revisions of the hardware. For older revisions the NIE and AIE bits are positions 16 and 15 respectively. For newer revisions the NIE and AIE bits are positions 15 and 14. The effect in changing the bit position is that newer hardware won't receive AIE interrupts in the current version of the driver. Specifically, the driver uses this interrupt to collect statistics on when a receive buffer unavailable event occurs and to restart the driver/device when a fatal bus error occurs. Update the driver to set the interrupt enable bit based on the reported version of the hardware. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net:ethernet:aquantia: Show info message if bad firmware version detected.Pavel Belous1-0/+6
We should inform user about wrong firmware version by printing message in dmesg. Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer") Signed-off-by: Pavel Belous <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net:ethernet:aquantia: Fix for multicast filter handling.Igor Russkikh1-1/+16
Since the HW supports up to 32 multicast filters we should track count of multicast filters to avoid overflow. If we attempt to add >32 multicast filter - just set NETIF_ALLMULTI flag instead. Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net:ethernet:aquantia: Fix for incorrect speed index.Pavel Belous4-23/+18
The driver choose the optimal interrupt throttling settings depends of current link speed. Due this bug link_status field from aq_hw is never updated and as result always used same interrupt throttling values. Fixes: 3d2ff7eebe26 ("net: ethernet: aquantia: Atlantic hardware abstraction layer") Signed-off-by: Pavel Belous <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net:ethernet:aquantia: Workaround for HW checksum bug.Pavel Belous2-0/+12
The hardware has the HW Checksum Offload bug when small TCP patckets (with length <= 60 bytes) has wrong "checksum valid" bit. The solution is - ignore checksum valid bit for small packets (with length <= 60 bytes) and mark this as CHECKSUM_NONE to allow network stack recalculate checksum itself. Fixes: ccf9a5ed14be ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.") Signed-off-by: Pavel Belous <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net:ethernet:aquantia: Fix for number of RSS queues.Pavel Belous1-0/+2
The number of RSS queues should be not more than numbers of CPU. Its does not make sense to increase perfomance, and also cause problems on some motherboards. Fixes: 94f6c9e4cdf6 ("net: ethernet: aquantia: Support for NIC-specific code") Signed-off-by: Pavel Belous <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net:ethernet:aquantia: Extra spinlocks removed.Pavel Belous4-41/+14
This patch removes datapath spinlocks which does not perform any useful work. Fixes: 6e70637f9f1e ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Pavel Belous <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net/mlx4: Add user mac FW update supportMoshe Shemesh5-2/+56
Adding support for updating the FW on new port mac, when port mac change is requested by the user. This info is required by the FW as OEM management tools require this info directly from the NIC FW. Check device capability bit to verify the FW supports user mac. If the FW does support it, use set_port command to notify the FW on the new mac. The feature is relevant only to PF port mac. Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net/mlx4_core: Fix misplaced brackets of sizeofTariq Toukan1-1/+1
When changing the sizeof style usage in the patch cited below, one brackets misplacement was introduced. Here we fix it. Fixes: 31975e27a4b5 ("mlx4: sizeof style usage") Signed-off-by: Tariq Toukan <[email protected]> Cc: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net/mlx4_core: Make explicit conversion to 64bit valueLeon Romanovsky1-1/+1
The "lg" variable is declared as int so in all places where this variable is used as a shift operand, the output will be int too. This produces the following smatch warning: drivers/net/ethernet/mellanox/mlx4/fw.c:1532 mlx4_map_cmd() warn: should '1 << lg' be a 64 bit type? Simple declaration of "1" to be "1ULL" will fix the issue. Fixes: 225c7b1feef1 ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net/mlx4_core: Dynamically allocate structs at mlx4_slave_capEran Ben Elisha4-140/+137
In order to avoid temporary large structs on the stack, allocate them dynamically. Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Tal Alon <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net: systemport: Set correct RSB endian bits based on hostFlorian Fainelli1-2/+6
RSB_SWAP0 needs to match the host CPU endian, and it needs to be set for LE and clear for BE. RSB_SWAP1 must always be cleared for SYSTEMPORT Lite. With these settings, we have the Receive Status Block always match the host endian and we do not need to perform any conversion. Since there is not necessarily a CONFIG_CPU_LITTLE_ENDIAN option defined, we test for !CONFIG_CPU_BIG_ENDIAN which is guaranteed to be set. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net: systemport: Use correct I/O accessorsFlorian Fainelli1-6/+6
The SYSTEMPORT driver currently uses __raw_{read,write}l which means native I/O endian. This works correctly for an ARM LE kernel (default) but fails miserably on an ARM BE (BE8) kernel where registers are kept little endian, so replace uses with {read,write}l_relaxed here which is what we want because this is all performance sensitive code. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29net: stmmac: constify clk_div_tableArvind Yadav1-1/+1
clk_div_table are not supposed to change at runtime. meson8b_dwmac structure is working with const clk_div_table. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29bnxt_en: add a dummy definition for bnxt_vf_rep_get_fid()Sathya Perla1-0/+5
When bnxt VF-reps are not compiled in (CONFIG_BNXT_SRIOV is off) bnxt_tc.c needs a dummy definition of the routine bnxt_vf_rep_get_fid(). Reported-by: kbuild test robot <[email protected]> Fixes: 2ae7408fedfe ("bnxt_en: bnxt: add TC flower filter offload support") Signed-off-by: Sathya Perla <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-29smp: Avoid using two cache lines for struct call_single_dataYing Huang2-2/+2
struct call_single_data is used in IPIs to transfer information between CPUs. Its size is bigger than sizeof(unsigned long) and less than cache line size. Currently it is not allocated with any explicit alignment requirements. This makes it possible for allocated call_single_data to cross two cache lines, which results in double the number of the cache lines that need to be transferred among CPUs. This can be fixed by requiring call_single_data to be aligned with the size of call_single_data. Currently the size of call_single_data is the power of 2. If we add new fields to call_single_data, we may need to add padding to make sure the size of new definition is the power of 2 as well. Fortunately, this is enforced by GCC, which will report bad sizes. To set alignment requirements of call_single_data to the size of call_single_data, a struct definition and a typedef is used. To test the effect of the patch, I used the vm-scalability multiple thread swap test case (swap-w-seq-mt). The test will create multiple threads and each thread will eat memory until all RAM and part of swap is used, so that huge number of IPIs are triggered when unmapping memory. In the test, the throughput of memory writing improves ~5% compared with misaligned call_single_data, because of faster IPIs. Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Huang, Ying <[email protected]> [ Add call_single_data_t and align with size of call_single_data. ] Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Aaron Lu <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Juergen Gross <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2017-08-29net/mlx5: Add XRQ supportArtemy Kovalyov1-10/+140
Add support to new XRQ(eXtended shared Receive Queue) hardware object. It supports SRQ semantics with addition of extended receive buffers topologies and offloads. Currently supports tag matching topology and rendezvouz offload. Signed-off-by: Artemy Kovalyov <[email protected]> Reviewed-by: Yossi Itigin <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-08-29i825xx: switch to switch to dma_alloc_attrsChristoph Hellwig3-12/+9
This way we can always pass DMA_ATTR_NON_CONSISTENT, the SNI mips version will simply ignore the flag. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: David S. Miller <[email protected]>
2017-08-29au1000_eth: switch to dma_alloc_attrsChristoph Hellwig1-8/+10
Use dma_alloc_attrs directly instead of the dma_alloc_noncoherent wrapper. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: David S. Miller <[email protected]>
2017-08-29sgiseeq: switch to dma_alloc_attrsChristoph Hellwig1-4/+4
Use dma_alloc_attrs directly instead of the dma_alloc_noncoherent wrapper. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Ralf Baechle <[email protected]> Acked-by: David S. Miller <[email protected]>
2017-08-28hinic: don't build the module by defaultVitaly Kuznetsov1-1/+0
We probably don't want to enable code supporting particular hardware by default e.g. when someone does 'make defconfig'. Other ethernet modules don't do it. Signed-off-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: add code to query TC flower offload statsSathya Perla1-0/+95
This patch adds code to implement TC_CLSFLOWER_STATS TC-cmd and the required FW code to query the stats from the HW. Signed-off-by: Sathya Perla <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: add TC flower offload flow_alloc/free FW cmdsSathya Perla1-2/+139
This patch adds the hwrm_cfa_flow_alloc/free() routines that are needed to issue the FW cmds needed for TC flower offload. Signed-off-by: Sathya Perla <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: bnxt: add TC flower filter offload supportSathya Perla8-9/+850
This patch adds support for offloading TC based flow rules and actions for the 'flower' classifier in the bnxt_en driver. It includes logic to parse flow rules and actions received from the TC subsystem, store them and issue the corresponding hwrm_cfa_flow_alloc/free FW cmds. L2/IPv4/IPv6 flows and drop, redir, vlan push/pop actions are supported in this patch. In this patch the hwrm_cfa_flow_xxx routines are just stubs. The code for these routines is introduced in the next patch for easier review. Also, the code to query the TC/flower action stats will be introduced in a subsequent patch. Signed-off-by: Sathya Perla <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: fix clearing devlink ptr from bnxt structSathya Perla2-7/+11
The routine bnxt_link_bp_to_dl() is used to set the devlink ptr in bnxt struct (bp) and also to set the bnxt back ptr in the devlink struct. If devlink_register() fails, bp->dl must be cleared which is not happening currently. This patch fixes bnxt_link_bp_to_dl() to clear bp->dl by passing a NULL dl ptr. Fixes: 4ab0c6a8ffd7 ("bnxt_en: add support to enable VF-representors") Signed-off-by: Sathya Perla <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: Reduce default rings on multi-port cards.Michael Chan2-4/+10
Reduce default rings from 8 to 4 on multi-port cards to reduce memory usage. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: Improve -ENOMEM logic in NAPI poll loop.Michael Chan1-0/+7
If we cannot allocate RX buffers in the NAPI poll loop when processing an RX event, the current code does not count that event towards the NAPI budget. This can cause us to potentially loop forever in NAPI if we consistently cannot allocate new buffers. Improve it by counting -ENOMEM event as 1 towards the NAPI budget. Cc: Martin KaFai Lau <[email protected]> Signed-off-by: Michael Chan <[email protected]> Reported-by: Martin KaFai Lau <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt: initialize board_info values with proper enumsScott Branden1-32/+32
initialize board_info values with proper enums for defensive programming purposes. This will avoid any errors of the enums being declared not lining up with the board_info array. Signed-off-by: Scott Branden <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt: Add PCIe device IDs for bcm58802/bcm58808Ray Jui2-1/+15
Add PCIe device ID for bcm58802 and bcm58808. Also add chip number update to declare bcm588xx as chip class phase 4 and later Signed-off-by: Ray Jui <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: assign CPU affinity hints to bnxt_en IRQsVasundhara Volam2-2/+27
This patch provides hints to irqbalance to map bnxt_en device IRQs to specific CPU cores. cpumask_local_spread() is used, which first maps IRQs to near NUMA cores; when those cores are exhausted, IRQs are mapped to far NUMA cores. Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: Improve tx ring reservation logic.Michael Chan4-14/+44
When the number of TX rings is changed (e.g. ethtool -L, enabling XDP TX rings, etc), the current code tries to reserve the new number of TX rings before closing and re-opening the NIC. If we are unable to reserve the new TX rings, we abort the operation and keep the current TX rings. The problem is that the firmware will disable the current TX rings even when it cannot reserve the new set of TX rings. We fix it as follows: 1. Instead of reserving the new set of TX rings, just ask the firmware to check if the new set of TX rings is available. There is a flag in the firmware message to do that. If not available, abort and the current TX rings will not be disabled. 2. Do the actual TX ring reservation in the path that opens the NIC. We keep the number of TX rings currently successfully reserved. If the number of TX rings is different than the reserved TX rings, we call firmware and reserve again. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28bnxt_en: Update firmware interface spec. to 1.8.1.4.Michael Chan1-5/+181
Flow APIs are added in this firmware interface. Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28ftgmac100: Support NCSI VLAN filtering when availableSamuel Mendoza-Jonas1-0/+5
Register the ndo_vlan_rx_{add,kill}_vid callbacks and set the NETIF_F_HW_VLAN_CTAG_FILTER if NCSI is available. This allows the VLAN core to notify the NCSI driver when changes occur so that the remote NCSI channel can be properly configured to filter on the set VLAN tags. Signed-off-by: Samuel Mendoza-Jonas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28Merge branch '40GbE' of ↵David S. Miller14-122/+280
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2017-08-27 This series contains updates to i40e and i40evf only. Sudheer updates code comments and state variable so that adminq_subtask will have accutate information whenever it gets scheduled. Mariusz stores information about FEC modes, to be used to printing link states information, so that we do not need to call admin queue when reporting link status. Adds VF support for controlling VLAN tag stripping via ethtool. Jake provides the majority of changes in this series, starting with increasing the size of the prefix buffer so that it can hold enough characters for every possible input, which prevents snprintf truncation. Fixed other string truncation errors/warnings produced by GCC 7.x. Removed an unnecessary workaround for resetting XPS. Fixed an issue where there is a mismatched affinity mask value, so initialize the value to cpu_possible_mask and invert the logic for checking incorrect CPU vs IRQ affinity so that the exceptional case is handled at the check. Removed ULTRA latency mode due to several issues found and will be looking at better solution for small packet workloads. Akeem fixes an issue where the incorrect flag was being used to set promiscuous mode for unicast, which was enabling promiscuous mode only for multicast instead of unicast. Carolyn fixes an issue where an error return value is set, but this value can be overwritten before we actually do exit the function. So remove the error code assignment and add code comments for better understanding on why we do not need to set and return the error. ==================== Signed-off-by: David S. Miller <[email protected]>
2017-08-28net-next/hinic: fix comparison of a uint16_t type with -1Aviad Krawczyk2-36/+22
Remove the search for index of constant buffer size Signed-off-by: Aviad Krawczyk <[email protected]> Signed-off-by: Zhao Chen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28net-next/hinic: Fix MTU limitationAviad Krawczyk1-0/+1
Fix the hw MTU limitation by setting max_mtu Signed-off-by: Aviad Krawczyk <[email protected]> Signed-off-by: Zhao Chen <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28dpaa_eth: check allocation resultMadalin Bucur1-0/+3
Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28dpaa_eth: add NETIF_F_RXHASHMadalin Bucur5-5/+41
Set the skb hash when then FMan Keygen hash result is available. Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28dpaa_eth: enable Rx hashing controlMadalin Bucur1-0/+113
Allow ethtool control of the Rx flow hashing. By default RSS is enabled, this allows to turn it off by bypassing the FMan Keygen block and sending all traffic on the default Rx frame queue. Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28dpaa_eth: use multiple Rx frame queuesMadalin Bucur3-7/+47
Add a block of 128 Rx frame queues per port. The FMan hardware will send traffic on one of these queues based on the FMan port Parse Classify Distribute setup. The hash computed by the FMan Keygen block will select the Rx FQ. Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28fsl/fman: enable FMan KeygenIordache Florinel-R701777-2/+884
Add support for the FMan Keygen with a hardcoded scheme to spread incoming traffic on a FQ range based on source and destination IPs and ports. Signed-off-by: Iordache Florinel <[email protected]> Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28fsl/fman: move struct fman to header fileMadalin Bucur3-81/+82
Signed-off-by: Madalin Bucur <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28net: ethernet: broadcom: Remove null check before kfreeHimanshu Jha1-8/+4
Kfree on NULL pointer is a no-op and therefore checking is redundant. Signed-off-by: Himanshu Jha <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28mlxsw: spectrum_dpipe: Fix host table dumpArkadi Sharshevsky1-0/+3
During the neighbor traversal the neighbors from different families should be ignored. Fixes: c58035a74aba ("mlxsw: spectrum_dpipe: Add support for IPv4 host table dump") Signed-off-by: Arkadi Sharshevsky <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-08-28mlxsw: spectrum: compile-in dpipe support only if devlink is enabledJiri Pirko2-1/+17
Makes no sense to have dpipe compiled in when devlink is not enabled, because the devlink dpipe registation is noop function. So don't compile it in. This also fixes missing extern structs errors. Reported-by: kbuild test robot <[email protected]> Fixes: a86f030915f2 ("mlxsw: spectrum_dpipe: Add support for IPv4 host table dump") Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.