aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xilinx
AgeCommit message (Collapse)AuthorFilesLines
2024-05-07net: annotate writes on dev->mtu from ndo_change_mtu()Eric Dumazet1-1/+1
Simon reported that ndo_change_mtu() methods were never updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted in commit 501a90c94510 ("inet: protect against too small mtu values.") We read dev->mtu without holding RTNL in many places, with READ_ONCE() annotations. It is time to take care of ndo_change_mtu() methods to use corresponding WRITE_ONCE() Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Simon Horman <[email protected]> Closes: https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Jacob Keller <[email protected]> Reviewed-by: Sabrina Dubroca <[email protected]> Reviewed-by: Simon Horman <[email protected]> Acked-by: Shannon Nelson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29net: axienet: Fix kernel doc warningsSuraj Gupta2-5/+22
Add description of mdio enable, mdio disable and mdio wait functions. Add description of skb pointer in axidma_bd data structure. Remove 'phy_node' description in axienet local data structure since it is not a valid struct member. Correct description of struct axienet_option. Fix below kernel-doc warnings in drivers/net/ethernet/xilinx/: 1) xilinx_axienet_mdio.c:1: warning: no structured comments found 2) xilinx_axienet.h:379: warning: Function parameter or struct member 'skb' not described in 'axidma_bd' 3) xilinx_axienet.h:538: warning: Excess struct member 'phy_node' description in 'axienet_local' 4) xilinx_axienet.h:1002: warning: expecting prototype for struct axiethernet_option. Prototype was for struct axienet_option instead Signed-off-by: Suraj Gupta <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-25net: ll_temac: platform_get_resource replaced by wrong functionClaus Hansen Ries1-1/+1
The function platform_get_resource was replaced with devm_platform_ioremap_resource_byname and is called using 0 as name. This eventually ends up in platform_get_resource_byname in the call stack, where it causes a null pointer in strcmp. if (type == resource_type(r) && !strcmp(r->name, name)) It should have been replaced with devm_platform_ioremap_resource. Fixes: bd69058f50d5 ("net: ll_temac: Use devm_platform_ioremap_resource_byname()") Signed-off-by: Claus Hansen Ries <[email protected]> Cc: [email protected] Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-02-09net: emaclite: Use devm_platform_get_and_ioremap_resource() in ↵Markus Elfring1-2/+1
xemaclite_of_probe() A wrapper function is available since the commit 890cc39a8799 ("drivers: provide devm_platform_get_and_ioremap_resource()"). Thus reuse existing functionality instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/ice/ice_main.c c9663f79cd82 ("ice: adjust switchdev rebuild path") 7758017911a4 ("ice: restore timestamp configuration after device reset") https://lore.kernel.org/all/[email protected]/ Adjacent changes: kernel/bpf/verifier.c bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations") 5f99f312bd3b ("bpf: add register bounds sanity checks and sanitization") Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-23net: axienet: Fix check for partial TX checksumSamuel Holland1-1/+1
Due to a typo, the code checked the RX checksum feature in the TX path. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Samuel Holland <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-20net: axienet: Introduce dmaengine supportRadhey Shyam Pandey3-2/+425
Add dmaengine framework to communicate with the xilinx DMAengine driver(AXIDMA). Axi ethernet driver uses separate channels for transmit and receive. Add support for these channels to handle TX and RX with skb and appropriate callbacks. Also add axi ethernet core interrupt for dmaengine framework support. The dmaengine framework was extended for metadata API support. However it still needs further enhancements to make it well suited for ethernet usecases. The ethernet features i.e ethtool set/get of DMA IP properties, ndo_poll_controller,(mentioned in TODO) are not supported and it requires follow-up discussions. dmaengine support has a dependency on xilinx_dma as it uses xilinx_vdma_channel_set_config() API to reset the DMA IP which internally reset MAC prior to accessing MDIO. Benchmark with netperf: xilinx-zcu102-20232:~$ netperf -H 192.168.10.20 -t TCP_STREAM MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.20 () port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 131072 16384 16384 10.02 886.69 xilinx-zcu102-20232:~$ netperf -H 192.168.10.20 -t UDP_STREAM MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.10.20 () port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 65507 10.00 15851 0 830.66 212992 10.00 15851 830.66 Signed-off-by: Radhey Shyam Pandey <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-11-20net: axienet: Preparatory changes for dmaengine supportSarath Babu Naidu Gaddam2-124/+162
The axiethernet driver has inbuilt dma programming. In order to add dmaengine support and make it's integration seamless the current axidma inbuilt programming code is put under use_dmaengine check. It also performs minor code reordering to minimize conditional use_dmaengine checks and there is no functional change. It uses "dmas" property to identify whether it should use a dmaengine framework or inbuilt axidma programming. Signed-off-by: Sarath Babu Naidu Gaddam <[email protected]> Signed-off-by: Radhey Shyam Pandey <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-01net: ethernet: xilinx: Drop kernel doc comment about return valueUwe Kleine-König1-2/+0
During review of the patch that became 2e0ec0afa902 ("net: ethernet: xilinx: Convert to platform remove callback returning void") in net-next, Radhey Shyam Pandey pointed out that the change makes the documentation about the return value obsolete. The patch was applied without addressing this feedback, so here comes a fix in a separate patch. Fixes: 2e0ec0afa902 ("net: ethernet: xilinx: Convert to platform remove callback returning void") Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-09-20net: ethernet: xilinx: Convert to platform remove callback returning voidUwe Kleine-König3-11/+6
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert these drivers from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2023-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-4/+8
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/[email protected]/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/[email protected]/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski <[email protected]>
2023-08-01net: ll_temac: fix error checking of irq_of_parse_and_map()Dan Carpenter1-4/+8
Most kernel functions return negative error codes but some irq functions return zero on error. In this code irq_of_parse_and_map(), returns zero and platform_get_irq() returns negative error codes. We need to handle both cases appropriately. Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Esben Haabendal <[email protected]> Reviewed-by: Yang Yingliang <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-07-27net: Explicitly include correct DT includesRob Herring5-7/+7
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Alex Elder <[email protected]> Reviewed-by: Bhupesh Sharma <[email protected]> Reviewed-by: Wei Fang <[email protected]> Signed-off-by: Rob Herring <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-5/+5
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-24net: axienet: Move reset before 64-bit DMA detectionMaxim Kochetkov1-5/+5
64-bit DMA detection will fail if axienet was started before (by boot loader, boot ROM, etc). In this state axienet will not start properly. XAXIDMA_TX_CDESC_OFFSET + 4 register (MM2S_CURDESC_MSB) is used to detect 64-bit DMA capability here. But datasheet says: When DMACR.RS is 1 (axienet is in enabled state), CURDESC_PTR becomes Read Only (RO) and is used to fetch the first descriptor. So iowrite32()/ioread32() trick to this register to detect 64-bit DMA will not work. So move axienet reset before 64-bit DMA detection. Fixes: f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") Signed-off-by: Maxim Kochetkov <[email protected]> Reviewed-by: Robert Hancock <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-22net: phylink: pass neg_mode into phylink_mii_c22_pcs_config()Russell King (Oracle)1-2/+4
Convert fman_dtsec, xilinx_axienet and pcs-lynx to pass the neg_mode into phylink_mii_c22_pcs_config(). Where appropriate, drivers are updated to have neg_mode passed into their pcs_config() and pcs_link_up() functions. For other drivers, we just hoist the call to phylink_pcs_neg_mode() to their pcs_config() method out of phylink_mii_c22_pcs_config(). Signed-off-by: Russell King (Oracle) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-03-16net: Use of_property_read_bool() for boolean propertiesRob Herring1-5/+4
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to of_property_read_bool(). Reviewed-by: Simon Horman <[email protected]> Acked-by: Marc Kleine-Budde <[email protected]> # for net/can Acked-by: Kalle Valo <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Acked-by: Francois Romieu <[email protected]> Reviewed-by: Wei Fang <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-12-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-1/+1
Merge in the left-over fixes before the net-next pull-request. net/mptcp/subflow.c d3295fee3c75 ("mptcp: use proper req destructor for IPv6") 36b122baf6a8 ("mptcp: add subflow_v(4,6)_send_synack()") Signed-off-by: Paolo Abeni <[email protected]>
2022-12-12net: emaclite: don't call dev_kfree_skb() under spin_lock_irqsave()Yang Yingliang1-1/+1
It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with hardware interrupts being disabled. It should use dev_kfree_skb_irq() or dev_consume_skb_irq() instead. The difference between them is free reason, dev_kfree_skb_irq() means the SKB is dropped in error and dev_consume_skb_irq() means the SKB is consumed in normal. In this case, dev_kfree_skb() is called in xemaclite_tx_timeout() to drop the SKB, when tx timeout, so replace it with dev_kfree_skb_irq(). Fixes: bb81b2ddfa19 ("net: add Xilinx emac lite device driver") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-21net: axienet: set mdio clock according to bus-frequencyAndy Chiu1-21/+49
Some FPGA platforms have 80KHz MDIO bus frequency constraint when connecting Ethernet to its on-board external Marvell PHY. Thus, we may have to set MDIO clock according to the DT. Otherwise, use the default 2.5 MHz, as specified by 802.3, if the entry is not present. Also, change MAX_MDIO_FREQ to DEFAULT_MDIO_FREQ because we may actually set MDIO bus frequency higher than 2.5MHz if undelying devices support it. And properly disable the mdio bus clock in error path. Signed-off-by: Andy Chiu <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-21net: axienet: Unexport and remove unused mdio functionsAndy Chiu2-14/+1
Both axienet_mdio_{enable/disable} functions are no longer used in xilinx_axienet_main.c due to 253761a0e61b7. And axienet_mdio_disable is not even used in the mdio.c. So unexport and remove them. Signed-off-by: Andy Chiu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-07net: remove explicit phylink_generic_validate() referencesRussell King (Oracle)1-1/+0
Virtually all conventional network drivers are now converted to use phylink_generic_validate() - only DSA drivers and fman_memac remain, so lets remove the necessity for network drivers to explicitly set this member, and default to phylink_generic_validate() when unset. This is possible as .validate must currently be set. Any remaining instances that have not been addressed by this patch can be fixed up later. Signed-off-by: Russell King (Oracle) <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-07net: axiemac: add PM callbacks to support suspend/resumeAndy Chiu1-0/+36
Support basic system-wide suspend and resume functions Signed-off-by: Andy Chiu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner1-4/+4
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-28net: emaclite: update reset_lock member documentationRadhey Shyam Pandey1-1/+1
Instead of generic description, mention what reset_lock actually protects i.e. lock to serialize xmit and tx_timeout execution. Signed-off-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-2/+2
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <[email protected]> # for CAN Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21net: ll_temac: axienet: delete unnecessary blank lines and spaceshuangjunxian3-4/+3
Cleaning some static warnings of indent. Signed-off-by: huangjunxian <[email protected]> Signed-off-by: Haoyue Xu <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21net: ll_temac: move trailing statements to next linehuangjunxian1-3/+9
Cleaning some static warnings of trailing statements. Signed-off-by: huangjunxian <[email protected]> Signed-off-by: Haoyue Xu <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21net: ll_temac: fix the missing spaces around '='huangjunxian1-11/+11
Cleaning some static warnings of missing spaces around '='. Signed-off-by: huangjunxian <[email protected]> Signed-off-by: Haoyue Xu <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21net: ll_temac: delete unnecessary else branchhuangjunxian1-7/+5
Cleaning some static warnings of unnecessary else branch. Signed-off-by: huangjunxian <[email protected]> Signed-off-by: Haoyue Xu <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21net: ll_temac: axienet: align with open parenthesishuangjunxian3-6/+5
Cleaning some static warnings of open parenthesis. Signed-off-by: huangjunxian <[email protected]> Signed-off-by: Haoyue Xu <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21net: ll_temac: Cleanup for function name in a stringHaoyue Xu1-4/+5
As Checkpatch.pl warns, prefer using '"%s...", __func__' to using 'temac_device_reset', this function's name, in a string. Signed-off-by: Haoyue Xu <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21net: ll_temac: fix the format of block commentshuangjunxian3-90/+103
Cleaning some static warnings of block comments. Signed-off-by: huangjunxian <[email protected]> Signed-off-by: Haoyue Xu <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-21net: ll_temac: Switch to use dev_err_probe() helperYang Yingliang1-10/+6
dev_err() can be replace with dev_err_probe() which will check if error code is -EPROBE_DEFER. Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-08-31net: axienet: Switch to 64-bit RX/TX statisticsRobert Hancock2-4/+45
The RX and TX byte/packet statistics in this driver could be overflowed relatively quickly on a 32-bit platform. Switch these stats to use the u64_stats infrastructure to avoid this. Signed-off-by: Robert Hancock <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang2-3/+3
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Petr Machata <[email protected]> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <[email protected]> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <[email protected]> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <[email protected]> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <[email protected]> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <[email protected]> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <[email protected]> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-27net: axienet: Modify function descriptionDeming Wang1-1/+1
Delete duplicate words of "the". Signed-off-by: Deming Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-16net: axienet: add missing error return code in axienet_probe()Yang Yingliang1-0/+1
It should return error code in error path in axienet_probe(). Fixes: 00be43a74ca2 ("net: axienet: make the 64b addresable DMA depends on 64b archectures") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-13xilinx: Fix build on x86.David S. Miller1-4/+4
CONFIG_64BIT is not sufficient for checking for availability of iowrite64() and friends. Also, the out_addr helpers need to be inline. Fixes: b690f8df6497 ("net: axienet: Use iowrite64 to write all 64b descriptor pointers") Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: axienet: Use iowrite64 to write all 64b descriptor pointersAndy Chiu1-3/+18
According to commit f735c40ed93c ("net: axienet: Autodetect 64-bit DMA capability") and AXI-DMA spec (pg021), on 64-bit capable dma, only writing MSB part of tail descriptor pointer causes DMA engine to start fetching descriptors. However, we found that it is true only if dma is in idle state. In other words, dma would use a tailp even if it only has LSB updated, when the dma is running. The non-atomicity of this behavior could be problematic if enough delay were introduced in between the 2 writes. For example, if an interrupt comes right after the LSB write and the cpu spends long enough time in the handler for the dma to get back into idle state by completing descriptors, then the seconcd write to MSB would treat dma to start fetching descriptors again. Since the descriptor next to the one pointed by current tail pointer is not filled by the kernel yet, fetching a null descriptor here causes a dma internal error and halt the dma engine down. We suggest that the dma engine should start process a 64-bit MMIO write to the descriptor pointer only if ONE 32-bit part of it is written on all states. Or we should restrict the use of 64-bit addressable dma on 32-bit platforms, since those devices have no instruction to guarantee the write to LSB and MSB part of tail pointer occurs atomically to the dma. initial condition: curp = x-3; tailp = x-2; LSB = x; MSB = 0; cpu: |dma: iowrite32(LSB, tailp) | completes #(x-3) desc, curp = x-3 ... | tailp updated => irq | completes #(x-2) desc, curp = x-2 ... | completes #(x-1) desc, curp = x-1 ... | ... ... | completes #x desc, curp = tailp = x <= irqreturn | reaches tailp == curp = x, idle iowrite32(MSB, tailp + 4) | ... | tailp updated, starts fetching... | fetches #(x + 1) desc, sees cntrl = 0 | post Tx error, halt Signed-off-by: Andy Chiu <[email protected]> Reported-by: Max Hsu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-06-13net: axienet: make the 64b addresable DMA depends on 64b archecturesAndy Chiu2-24/+40
Currently it is not safe to config the IP as 64-bit addressable on 32-bit archectures, which cannot perform a double-word store on its descriptor pointers. The pointer is 64-bit wide if the IP is configured as 64-bit, and the device would process the partially updated pointer on some states if the pointer was updated via two store-words. To prevent such condition, we force a probe fail if we discover that the IP has 64-bit capability but it is not running on a 64-Bit kernel. This is a series of patch (1/2). The next patch must be applied in order to make 64b DMA safe on 64b archectures. Signed-off-by: Andy Chiu <[email protected]> Reported-by: Max Hsu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-13net: axienet: Use NAPI for TX completion pathRobert Hancock2-85/+111
This driver was using the TX IRQ handler to perform all TX completion tasks. Under heavy TX network load, this can cause significant irqs-off latencies (found to be in the hundreds of microseconds using ftrace). This can cause other issues, such as overrunning serial UART FIFOs when using high baud rates with limited UART FIFO sizes. Switch to using a NAPI poll handler to perform the TX completion work to get this out of hard IRQ context and avoid the IRQ latency impact. A separate poll handler is used for TX and RX since they have separate IRQs on this controller, so that the completion work for each of them stays on the same CPU as the interrupt. Testing on a Xilinx MPSoC ZU9EG platform using iperf3 from a Linux PC through a switch at 1G link speed showed no significant change in TX or RX throughput, with approximately 941 Mbps before and after. Hard IRQ time in the TX throughput test was significantly reduced from 12% to below 1% on the CPU handling TX interrupts, with total hard+soft IRQ CPU usage dropping from about 56% down to 48%. Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-13net: axienet: Be more careful about updating tx_bd_tailRobert Hancock1-11/+15
The axienet_start_xmit function was updating the tx_bd_tail variable multiple times, with potential rollbacks on error or invalid intermediate positions, even though this variable is also used in the TX completion path. Use READ_ONCE where this variable is read and WRITE_ONCE where it is written to make this update more atomic, and move the write before the MMIO write to start the transfer, so it is protected by that implicit write barrier. Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-18/+12
tools/testing/selftests/net/forwarding/Makefile f62c5acc800e ("selftests/net/forwarding: add missing tests to Makefile") 50fe062c806e ("selftests: forwarding: new test, verify host mdb entries") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-03net: emaclite: Add error handling for of_address_to_resource()Shravya Kumbham1-3/+12
check the return value of of_address_to_resource() and also add missing of_node_put() for np and npp nodes. Fixes: e0a3bc65448c ("net: emaclite: Support multiple phys connected to one MDIO bus") Addresses-Coverity: Event check_return value. Signed-off-by: Shravya Kumbham <[email protected]> Signed-off-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-05-03net: emaclite: Don't advertise 1000BASE-T and do auto negotiationShravya Kumbham1-15/+0
In xemaclite_open() function we are setting the max speed of emaclite to 100Mb using phy_set_max_speed() function so, there is no need to write the advertising registers to stop giga-bit speed and the phy_start() function starts the auto-negotiation so, there is no need to handle it separately using advertising registers. Remove the phy_read and phy_write of advertising registers in xemaclite_open() function. Signed-off-by: Shravya Kumbham <[email protected]> Signed-off-by: Radhey Shyam Pandey <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-04-15net: emaclite: Remove custom BUFFER_ALIGN macroShravya Kumbham1-16/+2
BUFFER_ALIGN macro is used to calculate the number of bytes required for the next alignment. Instead of this, we can directly use the skb_reserve(skb, NET_IP_ALIGN) to make the protocol header buffer aligned on at least a 4-byte boundary, where the NET_IP_ALIGN is by default defined as 2. So removing the BUFFER_ALIGN and its related defines which it can be done by the skb_reserve() itself. Signed-off-by: Shravya Kumbham <[email protected]> Signed-off-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-15net: emaclite: Update copyright text to correct formatMichal Simek1-1/+1
Based on recommended guidance Copyright term should be also present in front of (c). That's why aligned driver to match this pattern. It helps automated tools with source code scanning. Signed-off-by: Michal Simek <[email protected]> Signed-off-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-15net: emaclite: Fix coding styleRadhey Shyam Pandey1-20/+15
Make coding style changes to fix checkpatch script warnings. There is no functional change. Fixes below check and warnings- CHECK: Blank lines aren't necessary after an open brace '{' CHECK: spinlock_t definition without comment CHECK: Please don't use multiple blank lines WARNING: Prefer 'unsigned int' to bare use of 'unsigned' CHECK: braces {} should be used on all arms of this statement CHECK: Unbalanced braces around else statement CHECK: Alignment should match open parenthesis WARNING: Missing a blank line after declarations Signed-off-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.