aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/xilinx
AgeCommit message (Collapse)AuthorFilesLines
2020-09-25drivers/net/ethernet: remove incorrectly formatted docJesse Brandeburg1-13/+13
As part of the W=1 series for ethernet, these drivers were discovered to be using kdoc style comments but were not actually doing kdoc. The kernel uses kdoc style when documenting code, not doxygen or other styles. Fixed Warnings: drivers/net/ethernet/amazon/ena/ena_com.c:613: warning: Function parameter or member 'ena_dev' not described in 'ena_com_set_llq' drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_b0.c:1540: warning: Cannot understand * @brief Set VLAN filter table drivers/net/ethernet/xilinx/ll_temac_main.c:114: warning: Function parameter or member 'lp' not described in 'temac_indirect_busywait' drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32' drivers/net/ethernet/xilinx/ll_temac_main.c:129: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32' drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'lp' not described in 'temac_indirect_in32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:147: warning: Function parameter or member 'reg' not described in 'temac_indirect_in32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:172: warning: Function parameter or member 'value' not described in 'temac_indirect_out32' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'lp' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'reg' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:188: warning: Function parameter or member 'value' not described in 'temac_indirect_out32_locked' drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'lp' not described in 'temac_dma_in32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:212: warning: Function parameter or member 'reg' not described in 'temac_dma_in32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'lp' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'reg' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:228: warning: Function parameter or member 'value' not described in 'temac_dma_out32_be' drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_in' drivers/net/ethernet/xilinx/ll_temac_main.c:247: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_in' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'lp' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'reg' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:255: warning: Function parameter or member 'value' not described in 'temac_dma_dcr_out' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'lp' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'op' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:265: warning: Function parameter or member 'np' not described in 'temac_dcr_setup' drivers/net/ethernet/xilinx/ll_temac_main.c:300: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_release' drivers/net/ethernet/xilinx/ll_temac_main.c:330: warning: Function parameter or member 'ndev' not described in 'temac_dma_bd_init' drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'ndev' not described in 'temac_setoptions' drivers/net/ethernet/xilinx/ll_temac_main.c:600: warning: Function parameter or member 'options' not described in 'temac_setoptions' Signed-off-by: Jesse Brandeburg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-09-07net: xilinx: remove redundant null check before clk_disable_unprepare()Zhang Changzhong1-2/+1
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Reported-by: Hulk Robot <[email protected]> Signed-off-by: Zhang Changzhong <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-07-30net: ll_temac: Use devm_platform_ioremap_resource_byname()Wang Hai1-4/+2
platform_get_resource() may fail and return NULL, so we had better check its return value to avoid a NULL pointer dereference a bit later in the code. Fix it to use devm_platform_ioremap_resource_byname() instead of calling platform_get_resource_byname() and devm_ioremap(). Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-15net: axienet: fix spelling mistake in comment "Exteneded" -> "extended"Colin Ian King1-1/+1
There is a spelling mistake in a comment. Fix it. Signed-off-by: Colin Ian King <[email protected]> Acked-by: Michal Simek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada1-4/+4
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <[email protected]>
2020-04-30net: ll_temac: Fix return value check in temac_probe()Wei Yongjun1-4/+4
In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <[email protected]> Acked-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Allow DMA to beyond 4GBAndre Przywara1-0/+8
With all DMA address accesses wrapped, we can actually support 64-bit DMA if this option was chosen at IP integration time. If the IP has been configured for an address width greater than 32 bits, we assume the full 64 bit DMA width is working. In practise this will be limited by the actual system address bus width, which will ideally be the same as the DMA IP address width. If this is not the case, the actual width can still be configured using a dma-ranges property in the parent of the MAC node. This increases the DMA mask on those systems to let the kernel choose buffers from memory at higher addresses. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Autodetect 64-bit DMA capabilityAndre Przywara2-0/+27
When newer revisions of the Axienet IP are configured for a 64-bit bus, we *need* to write to the MSB part of the an address registers, otherwise the IP won't recognise this as a DMA start condition. This is even true when the actual DMA address comes from the lower 4 GB. To autodetect this configuration, at probe time we write all 1's to such an MSB register, and see if any bits stick. If this is configured for a 32-bit bus, those MSB registers are RES0, so reading back 0 indicates that no MSB writes are necessary. On the other hands reading anything other than 0 indicated the need to write the MSB registers, so we set the respective flag. The actual DMA mask stays at 32-bit for now. To help bisecting, a separate patch will enable allocations from higher addresses. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Upgrade descriptors to hold 64-bit addressesAndre Przywara2-39/+83
Newer revisions of the AXI DMA IP (>= v7.1) support 64-bit addresses, both for the descriptors itself, as well as for the buffers they are pointing to. This is realised by adding "MSB" words for the next and phys pointer right behind the existing address word, now named "LSB". These MSB words live in formerly reserved areas of the descriptor. If the hardware supports it, write both words when setting an address. The buffer address is handled by two wrapper functions, the two occasions where we set the next pointers are open coded. For now this is guarded by a flag which we don't set yet. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Wrap DMA pointer writes to prepare for 64 bitAndre Przywara1-10/+16
Newer versions of the Xilink DMA IP support busses with more than 32 address bits, by introducing an MSB word for the registers holding DMA pointers (tail/current, RX/TX descriptor addresses). On IP configured for more than 32 bits, it is also *required* to write both words, to let the IP recognise this as a start condition for an MM2S request, for instance. Wrap the DMA pointer writes with a separate function, to add this functionality later. For now we stick to the lower 32 bits. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Add mii-tool supportAndre Przywara1-0/+11
mii-tool is useful for debugging, and all it requires to work is to wire up the ioctl ops function pointer. Add this to the axienet driver to enable mii-tool. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Drop MDIO interrupt registers from ethtools dumpAndre Przywara2-11/+0
Newer revisions of the IP don't have these registers. Since we don't really use them, just drop them from the ethtools dump. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Mark eth_irq as optionalAndre Przywara1-2/+2
According to the DT binding, the Ethernet core interrupt is optional. Use platform_get_irq_optional() to avoid the error message when the IRQ is not specified. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Check for DMA mapping errorsAndre Przywara1-1/+30
Especially with the default 32-bit DMA mask, DMA buffers are a limited resource, so their allocation can fail. So as the DMA API documentation requires, add error checking code after dma_map_single() calls to catch the case where we run out of "low" memory. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Factor out TX descriptor chain cleanupAndre Przywara1-22/+57
Factor out the code that cleans up a number of connected TX descriptors, as we will need it to properly roll back a failed _xmit() call. There are subtle differences between cleaning up a successfully sent chain (unknown number of involved descriptors, total data size needed) and a chain that was about to set up (number of descriptors known), so cater for those variations with some extra parameters. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Improve DMA error handlingAndre Przywara1-2/+2
Since 0 is a valid DMA address, we cannot use the physical address to check whether a TX descriptor is valid and is holding a DMA mapping. Use the "cntrl" member of the descriptor to make this decision, as it contains at least the length of the buffer, so 0 points to an uninitialised buffer. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Fix DMA descriptor cleanup pathAndre Przywara1-15/+28
When axienet_dma_bd_init() bails out during the initialisation process, it might do so with parts of the structure already allocated and initialised, while other parts have not been touched yet. Before returning in this case, we call axienet_dma_bd_release(), which does not take care of this corner case. This is most obvious by the first loop happily dereferencing lp->rx_bd_v, which we actually check to be non NULL *afterwards*. Make sure we only unmap or free already allocated structures, by: - directly returning with -ENOMEM if nothing has been allocated at all - checking for lp->rx_bd_v to be non-NULL *before* using it - only unmapping allocated DMA RX regions This avoids NULL pointer dereferences when initialisation fails. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Propagate failure of DMA descriptor setupAndre Przywara1-7/+19
When we fail allocating the DMA buffers in axienet_dma_bd_init(), we report this error, but carry on with initialisation nevertheless. This leads to a kernel panic when the driver later wants to send a packet, as it uses uninitialised data structures. Make the axienet_device_reset() routine return an error value, as it contains the DMA buffer initialisation. Make sure we propagate the error up the chain and eventually fail the driver initialisation, to avoid relying on non-initialised buffers. Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: axienet: Convert DMA error handler to a work queueAndre Przywara2-13/+13
The DMA error handler routine is currently a tasklet, scheduled to run after the DMA error IRQ was handled. However it needs to take the MDIO mutex, which is not allowed to do in a tasklet. A kernel (with debug options) complains consequently: [ 614.050361] net eth0: DMA Tx error 0x174019 [ 614.064002] net eth0: Current BD is at: 0x8f84aa0ce [ 614.080195] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935 [ 614.109484] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 40, name: kworker/u4:4 [ 614.135428] 3 locks held by kworker/u4:4/40: [ 614.149075] #0: ffff000879863328 ((wq_completion)rpciod){....}, at: process_one_work+0x1f0/0x6a8 [ 614.177528] #1: ffff80001251bdf8 ((work_completion)(&task->u.tk_work)){....}, at: process_one_work+0x1f0/0x6a8 [ 614.209033] #2: ffff0008784e0110 (sk_lock-AF_INET-RPC){....}, at: tcp_sendmsg+0x24/0x58 [ 614.235429] CPU: 0 PID: 40 Comm: kworker/u4:4 Not tainted 5.6.0-rc3-00926-g4a165a9d5921 #26 [ 614.260854] Hardware name: ARM Test FPGA (DT) [ 614.274734] Workqueue: rpciod rpc_async_schedule [ 614.289022] Call trace: [ 614.296871] dump_backtrace+0x0/0x1a0 [ 614.308311] show_stack+0x14/0x20 [ 614.318751] dump_stack+0xbc/0x100 [ 614.329403] ___might_sleep+0xf0/0x140 [ 614.341018] __might_sleep+0x4c/0x80 [ 614.352201] __mutex_lock+0x5c/0x8a8 [ 614.363348] mutex_lock_nested+0x1c/0x28 [ 614.375654] axienet_dma_err_handler+0x38/0x388 [ 614.389999] tasklet_action_common.isra.15+0x160/0x1a8 [ 614.405894] tasklet_action+0x24/0x30 [ 614.417297] efi_header_end+0xe0/0x494 [ 614.429020] irq_exit+0xd0/0xd8 [ 614.439047] __handle_domain_irq+0x60/0xb0 [ 614.451877] gic_handle_irq+0xdc/0x2d0 [ 614.463486] el1_irq+0xcc/0x180 [ 614.473451] __tcp_transmit_skb+0x41c/0xb58 [ 614.486513] tcp_write_xmit+0x224/0x10a0 [ 614.498792] __tcp_push_pending_frames+0x38/0xc8 [ 614.513126] tcp_rcv_established+0x41c/0x820 [ 614.526301] tcp_v4_do_rcv+0x8c/0x218 [ 614.537784] __release_sock+0x5c/0x108 [ 614.549466] release_sock+0x34/0xa0 [ 614.560318] tcp_sendmsg+0x40/0x58 [ 614.571053] inet_sendmsg+0x40/0x68 [ 614.582061] sock_sendmsg+0x18/0x30 [ 614.593074] xs_sendpages+0x218/0x328 [ 614.604506] xs_tcp_send_request+0xa0/0x1b8 [ 614.617461] xprt_transmit+0xc8/0x4f0 [ 614.628943] call_transmit+0x8c/0xa0 [ 614.640028] __rpc_execute+0xbc/0x6f8 [ 614.651380] rpc_async_schedule+0x28/0x48 [ 614.663846] process_one_work+0x298/0x6a8 [ 614.676299] worker_thread+0x40/0x490 [ 614.687687] kthread+0x134/0x138 [ 614.697804] ret_from_fork+0x10/0x18 [ 614.717319] xilinx_axienet 7fe00000.ethernet eth0: Link is Down [ 615.748343] xilinx_axienet 7fe00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Since tasklets are not really popular anymore anyway, lets convert this over to a work queue, which can sleep and thus can take the MDIO mutex. Signed-off-by: Andre Przywara <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-24net: xilinx: temac: Relax Kconfig dependenciesAndre Przywara1-1/+0
Similar to axienet, the temac driver is now architecture agnostic, and can be at least compiled for several architectures. Especially the fact that this is a soft IP for implementing in FPGAs makes the current restriction rather pointless, as it could literally appear on any architecture, as long as an FPGA is connected to the bus. The driver hasn't been actually tried on any hardware, it is just a drive-by patch when doing the same for axienet (a similar patch for axienet is already merged). This (temac and axienet) have been compile-tested for: alpha hppa64 microblaze mips64 powerpc powerpc64 riscv64 s390 sparc64 (using kernel.org cross compilers). Signed-off-by: Andre Przywara <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-17net: axienet: let core reject the unsupported coalescing parametersJakub Kicinski1-21/+1
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected all unsupported parameters. No functional changes. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-17net: ll_temac: let core reject the unsupported coalescing parametersJakub Kicinski1-19/+2
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver already correctly rejected all unsupported parameters. No functional changes. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-29net: ll_temac: Add ethtool support for coalesce parametersEsben Haabendal2-22/+81
Please note that the delays are calculated based on typical parameters. But as TEMAC is an HDL IP, designs may vary, and future work might be needed to make this calculation configurable. Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-29net: ll_temac: Make RX/TX ring sizes configurableEsben Haabendal2-26/+72
Add support for setting the RX and TX ring sizes for this driver using ethtool. Also increase the default RX ring size as the previous default was far too low for good performance in some configurations. Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-29net: ll_temac: Remove unused start_p variableEsben Haabendal1-2/+1
The start_p variable was included in the initial commit, commit 92744989533c ("net: add Xilinx ll_temac device driver"), but has never had any real use. Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-29net: ll_temac: Remove unused tx_bd_next struct fieldEsben Haabendal2-2/+0
The tx_bd_next field was included in the initial commit, commit 92744989533c ("net: add Xilinx ll_temac device driver"), but has never had any real use. Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-38/+175
The mptcp conflict was overlapping additions. The SMC conflict was an additional and removal happening at the same time. Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: axienet: use resolved link config in mac_link_up()Russell King1-19/+19
Convert the Xilinx AXI ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Tested-by: Andre Przywara <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-27net: phylink: propagate resolved link config via mac_link_up()Russell King1-3/+4
Propagate the resolved link parameters via the mac_link_up() call for MACs that do not automatically track their PCS state. We propagate the link parameters via function arguments so that inappropriate members of struct phylink_link_state can't be accessed, and creating a new structure just for this adds needless complexity to the API. Tested-by: Andre Przywara <[email protected]> Tested-by: Alexandre Belloni <[email protected]> Tested-by: Vladimir Oltean <[email protected]> Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24net: ll_temac: Handle DMA halt condition caused by buffer underrunEsben Haabendal2-5/+56
The SDMA engine used by TEMAC halts operation when it has finished processing of the last buffer descriptor in the buffer ring. Unfortunately, no interrupt event is generated when this happens, so we need to setup another mechanism to make sure DMA operation is restarted when enough buffers have been added to the ring. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24net: ll_temac: Fix RX buffer descriptor handling on GFP_ATOMIC pressureEsben Haabendal2-31/+82
Failures caused by GFP_ATOMIC memory pressure have been observed, and due to the missing error handling, results in kernel crash such as [1876998.350133] kernel BUG at mm/slub.c:3952! [1876998.350141] invalid opcode: 0000 [#1] PREEMPT SMP PTI [1876998.350147] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.3.0-scnxt #1 [1876998.350150] Hardware name: N/A N/A/COMe-bIP2, BIOS CCR2R920 03/01/2017 [1876998.350160] RIP: 0010:kfree+0x1ca/0x220 [1876998.350164] Code: 85 db 74 49 48 8b 95 68 01 00 00 48 31 c2 48 89 10 e9 d7 fe ff ff 49 8b 04 24 a9 00 00 01 00 75 0b 49 8b 44 24 08 a8 01 75 02 <0f> 0b 49 8b 04 24 31 f6 a9 00 00 01 00 74 06 41 0f b6 74 24 5b [1876998.350172] RSP: 0018:ffffc900000f0df0 EFLAGS: 00010246 [1876998.350177] RAX: ffffea00027f0708 RBX: ffff888008d78000 RCX: 0000000000391372 [1876998.350181] RDX: 0000000000000000 RSI: ffffe8ffffd01400 RDI: ffff888008d78000 [1876998.350185] RBP: ffff8881185a5d00 R08: ffffc90000087dd8 R09: 000000000000280a [1876998.350189] R10: 0000000000000002 R11: 0000000000000000 R12: ffffea0000235e00 [1876998.350193] R13: ffff8881185438a0 R14: 0000000000000000 R15: ffff888118543870 [1876998.350198] FS: 0000000000000000(0000) GS:ffff88811f300000(0000) knlGS:0000000000000000 [1876998.350203] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 s#1 Part1 [1876998.350206] CR2: 00007f8dac7b09f0 CR3: 000000011e20a006 CR4: 00000000001606e0 [1876998.350210] Call Trace: [1876998.350215] <IRQ> [1876998.350224] ? __netif_receive_skb_core+0x70a/0x920 [1876998.350229] kfree_skb+0x32/0xb0 [1876998.350234] __netif_receive_skb_core+0x70a/0x920 [1876998.350240] __netif_receive_skb_one_core+0x36/0x80 [1876998.350245] process_backlog+0x8b/0x150 [1876998.350250] net_rx_action+0xf7/0x340 [1876998.350255] __do_softirq+0x10f/0x353 [1876998.350262] irq_exit+0xb2/0xc0 [1876998.350265] do_IRQ+0x77/0xd0 [1876998.350271] common_interrupt+0xf/0xf [1876998.350274] </IRQ> In order to handle such failures more graceful, this change splits the receive loop into one for consuming the received buffers, and one for allocating new buffers. When GFP_ATOMIC allocations fail, the receive will continue with the buffers that is still there, and with the expectation that the allocations will succeed in a later call to receive. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24net: ll_temac: Add more error handling of dma_map_single() callsEsben Haabendal1-2/+24
This adds error handling to the remaining dma_map_single() calls, so that behavior is well defined if/when we run out of DMA memory. Fixes: 92744989533c ("net: add Xilinx ll_temac device driver") Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-02-24net: ll_temac: Fix race condition causing TX hangEsben Haabendal1-3/+16
It is possible that the interrupt handler fires and frees up space in the TX ring in between checking for sufficient TX ring space and stopping the TX queue in temac_start_xmit. If this happens, the queue wake from the interrupt handler will occur before the queue is stopped, causing a lost wakeup and the adapter's transmit hanging. To avoid this, after stopping the queue, check again whether there is sufficient space in the TX ring. If so, wake up the queue again. This is a port of the similar fix in axienet driver, commit 7de44285c1f6 ("net: axienet: Fix race condition causing TX hang"). Fixes: 23ecc4bde21f ("net: ll_temac: fix checksum offload logic") Signed-off-by: Esben Haabendal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds2-13/+2
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-23net: convert suitable drivers to use phy_do_ioctl_runningHeiner Kallweit1-12/+1
Convert suitable drivers to use new helper phy_do_ioctl_running. Signed-off-by: Heiner Kallweit <[email protected]> Acked-by: Timur Tabi <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-2/+2
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <[email protected]> Acked-by: Arnd Bergmann <[email protected]>
2019-12-12netdev: pass the stuck queue to the timeout handlerMichael S. Tsirkin1-1/+1
This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Heiner Kallweit <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Acked-by: Shannon Nelson <[email protected]> Reviewed-by: Martin Habets <[email protected]> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <[email protected]>
2019-11-23net: phylink: rename mac_link_state() op to mac_pcs_get_state()Russell King1-5/+3
Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2019-11-13net: axienet: In kconfig remove arch dependency for axi_emacRadhey Shyam Pandey1-3/+1
To enable xilinx axi_emac driver support on zynqmp ultrascale platform (ARCH64) there are two choices, mention ARCH64 as a dependency list and other is to check if this ARCH dependency list is really needed. Later approach seems more reasonable, so remove the obsolete ARCH dependency list for the axi_emac driver. Sanity test done for microblaze, zynq and zynqmp ultrascale platform. Signed-off-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-06net: axienet: Fix error return code in axienet_probe()Wei Yongjun1-4/+0
In the DMA memory resource get failed case, the error is not set and 0 will be returned. Fix it by removing redundant check since devm_ioremap_resource() will handle it. Fixes: 28ef9ebdb64c ("net: axienet: make use of axistream-connected attribute optional") Signed-off-by: Wei Yongjun <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-04net: of_get_phy_mode: Change API to solve int/unit warningsAndrew Lunn1-4/+2
Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-09-27net: axienet: fix a signedness bug in probeDan Carpenter1-1/+1
The "lp->phy_mode" is an enum but in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: ee06b1728b95 ("net: axienet: add support for standard phy-mode binding") Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-07-08net: axienet: fix a potential double free in axienet_probe()Wen Yang1-1/+0
There is a possible use-after-free issue in the axienet_probe(): 1701: np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0); 1702: if (np) { ... 1787: of_node_put(np); ---> released here 1788: lp->eth_irq = platform_get_irq(pdev, 0); 1789: } else { ... 1801: } 1802: if (IS_ERR(lp->dma_regs)) { ... 1805: of_node_put(np); ---> double released here 1806: goto free_netdev; 1807: } We solve this problem by removing the unnecessary of_node_put(). Fixes: 28ef9ebdb64c ("net: axienet: make use of axistream-connected attribute optional") Signed-off-by: Wen Yang <[email protected]> Cc: Anirudha Sarangi <[email protected]> Cc: John Linn <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Michal Simek <[email protected]> Cc: Robert Hancock <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Reviewed-by: Robert Hancock <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-13net: axienet: move use of resource after validity checkRobert Hancock1-1/+1
We were accessing the pointer returned from platform_get_resource before checking if it was valid, causing an oops if it was not. Move this access after the call to devm_ioremap_resource which does the validity check. Signed-off-by: Robert Hancock <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+1
Some ISDN files that got removed in net-next had some changes done in mainline, take the removals. Signed-off-by: David S. Miller <[email protected]>
2019-06-06net: axienet: convert to phylink APIRobert Hancock3-101/+192
Convert this driver to use the phylink API rather than the legacy PHY API. This allows for better support for SFP modules connected using a 1000BaseX or SGMII interface. Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-06net: axienet: make use of axistream-connected attribute optionalRobert Hancock1-15/+28
Currently the axienet driver requires the use of a second devicetree node, referenced by an axistream-connected attribute on the Ethernet device node, which contains the resources for the AXI DMA block used by the device. This setup is problematic for a use case we have where the Ethernet and DMA cores are behind a PCIe to AXI bridge and the memory resources for the nodes are injected into the platform devices using the multifunction device subsystem - it's not easily possible for the driver to obtain the platform-level resources from the linked device. In order to simplify that usage model, and simplify the overall use of this driver in general, allow for all of the resources to be kept on one node where the resources are retrieved using platform device APIs rather than device-tree-specific ones. The previous usage setup is still supported if the axistream-connected attribute is specified. Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-06net: axienet: Fix MDIO bus parent node detectionRobert Hancock1-1/+2
This driver was previously using the parent node of the specified PHY node as the device node to register the MDIO bus on. Andrew Lunn pointed out this is wrong as the PHY node is potentially not even underneath the MDIO bus for the current device instance. Find the MDIO node explicitly by looking it up by name under the controller's device node instead. This could potentially break existing device trees if they don't use "mdio" as the name for the MDIO bus, but I did not find any with various searches and Xilinx's examples all use mdio as the name so it seems like this should be relatively safe. Signed-off-by: Robert Hancock <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-06net: axienet: stop interface during shutdownRobert Hancock1-0/+14
On some platforms, such as iMX6 with PCIe devices, crashes or hangs can occur if the axienet device continues to perform DMA transfers after parent devices/busses have been shut down. Shut down the axienet interface during its shutdown callback in order to avoid this. Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-06net: axienet: Make missing MAC address non-fatalRobert Hancock1-2/+3
Failing initialization on a missing MAC address property is excessive. We can just fall back to using a random MAC instead, which at least leaves the interface in a functioning state. Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: David S. Miller <[email protected]>