aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/qlogic/qed/qed_mcp.c
AgeCommit message (Collapse)AuthorFilesLines
2018-07-21qed: Fix possible race for the link state value.Sudarsana Reddy Kalluru1-0/+1
There's a possible race where driver can read link status in mid-transition and see that virtual-link is up yet speed is 0. Since in this mid-transition we're guaranteed to see a mailbox from MFW soon, we can afford to treat this as link down. Fixes: cc875c2e ("qed: Add link support") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21qed: Fix link flap issue due to mismatching EEE capabilities.Sudarsana Reddy Kalluru1-3/+9
Apparently, MFW publishes EEE capabilities even for Fiber-boards that don't support them, and later since qed internally sets adv_caps it would cause link-flap avoidance (LFA) to fail when driver would initiate the link. This in turn delays the link, causing traffic to fail. Driver has been modified to not to ask MFW for any EEE config if EEE isn't to be enabled. Fixes: 645874e5 ("qed: Add support for Energy efficient ethernet.") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05qed: Fix reading stale configuration informationDenis Bolotin1-12/+27
Configuration information read at driver load can become stale after it is updated. Mark information as not valid and re-populate when this happens. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-3/+3
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04qed: Fix use of incorrect shmem address.Sudarsana Reddy Kalluru1-2/+3
Incorrect shared memory address is used while deriving the values for tc and pri_type. Use shmem address corresponding to 'oem_cfg_func' where the management firmare saves tc/pri_type values. Fixes: cac6f691 ("qed: Add support for Unified Fabric Port") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22qed: Add driver infrastucture for handling mfw requests.Sudarsana Reddy Kalluru1-0/+2
MFW requests the TLVs in interrupt context. Extracting of the required data from upper layers and populating of the TLVs require process context. The patch adds work-queues for processing the tlv requests. It also adds the implementation for requesting the tlv values from appropriate protocol driver. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07qed: Add support for Unified Fabric Port.Sudarsana Reddy Kalluru1-0/+78
This patch adds driver changes for supporting the Unified Fabric Port (UFP). This is a new paritioning mode wherein MFW provides the set of parameters to be used by the device such as traffic class, outer-vlan tag value, priority type etc. Drivers receives this info via notifications from mfw and configures the hardware accordingly. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23qed: Add configuration information to register dump and debug dataDenis Bolotin1-4/+10
Configuration information is added to the debug data collection, in addition to register dump. Added qed_dbg_nvm_image() that receives an image type, allocates a buffer and reads the image. The images are saved in the buffers and the dump size is updated. Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23qed: Delete unused parameter p_ptt from mcp APIsDenis Bolotin1-3/+1
Since nvm images attributes are cached during driver load, acquiring ptt is not needed when calling qed_mcp_get_nvm_image(). Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qed: Add APIs for flash access.Sudarsana Reddy Kalluru1-0/+121
This patch adds APIs for flash access. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qed: Populate nvm image attribute shadow.Sudarsana Reddy Kalluru1-27/+71
This patch adds support for populating the flash image attributes. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02qed*: Utilize FW 8.33.1.0Tomer Tayar1-1/+1
Advance the qed* drivers to use firmware 8.33.1.0: Modify core driver (qed) to utilize the new FW and initialize the device with it. This is the lion's share of the patch, and includes changes to FW interface files, device initialization flows, FW interaction flows, and debug collection flows. Modify Ethernet driver (qede) to make use of new FW in fastpath. Modify RoCE/iWARP driver (qedr) to make use of new FW in fastpath. Modify FCoE driver (qedf) to make use of new FW in fastpath. Modify iSCSI driver (qedi) to make use of new FW in fastpath. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Yuval Bason <Yuval.Bason@cavium.com> Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Chad Dupuis <Chad.Dupuis@cavium.com> Signed-off-by: Manish Rangankar <Manish.Rangankar@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26qed: Add iWARP enablement supportMichal Kalderon1-4/+4
This patch is the last of the initial iWARP patch series. It adds the possiblity to actually detect iWARP from the device and enable it in the critical locations which basically make iWARP available. It wasn't submitted until now as iWARP hadn't been accepted into the rdma tree. Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The UDP offload conflict is dealt with by simply taking what is in net-next where we have removed all of the UFO handling code entirely. The TCP conflict was a case of local variables in a function being removed from both net and net-next. In netvsc we had an assignment right next to where a missing set of u64 stats sync object inits were added. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07qed: Fix a memory allocation failure test in 'qed_mcp_cmd_init()'Christophe Jaillet1-1/+1
We allocate 'p_info->mfw_mb_cur' and 'p_info->mfw_mb_shadow' but we check 'p_info->mfw_mb_addr' instead of 'p_info->mfw_mb_cur'. 'p_info->mfw_mb_addr' is never 0, because it is initiliazed a few lines above in 'qed_load_mcp_offsets()'. Update the test and check the result of the 2 'kzalloc()' instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27qed: Add support for Energy efficient ethernet.Sudarsana Reddy Kalluru1-0/+66
The patch adds required driver support for reading/configuring the Energy Efficient Ethernet (EEE) parameters. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Support NVM-image reading APIMintz, Yuval1-0/+89
Storage drivers require images from the nvram in boot-from-SAN scenarios. This provides the necessary API between qed and the protocol drivers to perform such reads. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-02qed: Correct order of wwnn and wwpnMintz, Yuval1-4/+4
Driver reads values via HSI splitting this 8-byte into 2 32-bit values and builds a single u64 field - but it does so by shifting the lower field instead of the higher. Luckily, we still don't use these fields for anything - but we're about to start. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: Support dynamic s-tag changeMintz, Yuval1-0/+26
In case management firmware indicates a change in the used S-tag, propagate the configuration to HW and FW. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-30qed: QL41xxx VF MSI-x tableMintz, Yuval1-2/+33
The QL41xxx adapters' PCI allows a single configuration for the MSI-x table size of all child VFs of a given PF. The existing code wouldn't cause the management firmware to set that value, meaning the VFs would retain the default MSI-x table size. Introduce a new scheme so that whenever a VF is enabled, driver would set the number of MSI-x to be the maximum over the various VFs' needs. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qed: Provide MBI information in dev_infoTomer Tayar1-0/+30
Pass additional information about package installed on persistent memory so that protocol drivers would be able to log it. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qed: Revise alloc/setup/free flowTomer Tayar1-0/+1
Re-organize the logic that allocates and frees memory of various sub-components of the hw-function - a. No need to pass pointers to said structure as parameters; The internal logic knows exactly where to find/set the data. b. Nullify pointers after cleanup to prevent possible errors to re-entrant code. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27qed: Add support for MFW resource locking.sudarsana.kalluru@cavium.com1-0/+30
The patch adds API for default initialization of the MFW resource locking. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-05qed: Add a missing error codeDan Carpenter1-1/+3
We should be returning -ENOMEM if qed_mcp_cmd_add_elem() fails. The current code returns success. Fixes: 4ed1eea82a21 ("qed: Revise MFW command locking") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28qed: Utilize resource-lock based schemeTomer Tayar1-20/+186
Management firmware is used as an arbiter between the various PFs in matters of resources, but some of the resources that need to be divided are dependent on the non-management firmware used, so management firmware first needs to be told how many resources there are before trying to divide them. As part of the initialization sequence, driver would first inform the management firmware of the available resources under a dedicated resource lock, and afterwards request for various resources which might be based on the previous set values. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28qed: Support management-based resource lockingTomer Tayar1-0/+176
Global locking can't properly be used to synchronize between different PFs in all scenarios, as those instances might reside in different logical partitions [e.g., when a PF is assigned via PDA to some VM]. The management firmware provides a generic infrastructure for device locks. For each 'resource', it's guaranteed it could be acquired by at most a single PF at any given time [or by management firmware]. This patch adds the necessary logic in qed for utilizing said infrastructure, implementing lock/unlock internal APIs. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28qed: Send pf-flr as part of initializationMintz, Yuval1-0/+8
During HW initialization, driver would set various registers to their needed values - but it assumes all registers start at their reset-value, so there's no need to re-configure a register's default value. This assumption might be incorrect, e.g., in case of preboot driver running and initializing the driver prior to our driver. To overcome this, we now ask management firmware to initiate a PF-flr early during the initialization sequence. That would return everything in the PF's scope back to default and prevent previous configurations from still being applied. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28qed: Move to new load request schemeTomer Tayar1-26/+330
Management firmware is used as an arbiter between the various PFs in regard to loading - it causes the various PFs to load/unload sequentially and informs each of its appropriate rule in the init. But the existing flow is too weak to handle some scenarios where PFs aren't properly cleaned prior to loading. The significant scenarios falling under this criteria: a. Preboot drivers in some environment can't properly unload. b. Unexpected driver replacement [kdump, PDA]. Modern management firmware supports a more intricate loading flow, where the driver has the ability to overcome previous limitations. This moves qed into using this newer scheme. Notice new scheme is backward compatible, so new drivers would still be able to load properly on top of older management firmwares and vice versa. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-28qed: Correct HW stop flowTomer Tayar1-20/+53
Management firmware is used as arbiter between different PFs which are loading/unloading, but in order to use the synchronization it offers the contending configurations need to be applied either between their LOAD_REQ <-> LOAD_DONE or UNLOAD_REQ <-> UNLOAD_DONE management firmware commands. Existing HW stop flow utilizes 2 different functions: qed_hw_stop() and qed_hw_reset() which don't abide this requirement; Most of the closure is doing outside the scope of the unload request. This patch removes qed_hw_reset() and places the relevant stop functionality underneath the management firmware protection. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23qed: Reduce verbosity of unimplemented MFW messagesMintz, Yuval1-1/+1
Management firmware and driver are meant to be both backward and forward compatibile with each other. If a new mangement firmware would work with an older driver, it's possible that driver would receive indications which are meaningless to it. That's perfectly acceptible from the firmware part - so no need to log such messages at default verbosity; That would only serve to confuse users. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23qed: Correct endian order of MAC passed to MFWMintz, Yuval1-2/+11
The management firmware is running on a Big Endian processor, and when running on LE platform HW is configured to swap access to memory shared between management firmware and driver on 32-bit granulariy. As a result, for matters of simplicity most of the APIs between driver and management firmware are based on 32-bit variables. MAC settings are one exception, as driver needs to fill a byte array when indicating to management firmware that primary MAC has changed. Due to the swap, driver must make sure that the mac that was provided in byte-order would be translated into native order, otherwise after the swap the management firmware would read it swapped. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23qed: Pass src/dst sizes when interacting with MFWTomer Tayar1-57/+62
The driver interaction with management firmware involves a union of all the data-members relating to the commands the driver prepares. Current interface assumes the caller always passes such a union - but thats cumbersome as well as risky [chancing a stack corruption in case caller accidentally passes a smaller member instead of union]. Change implementation so that caller could pass a pointer to any of the members instead of the union. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23qed: Revise MFW command lockingTomer Tayar1-133/+272
Interaction of driver -> management firmware is based on a one-pending mailbox [per interface], and various mailbox commands need to be synchronized. Current scheme is messy, and there's a difficulty extending it as it deals differently with various commands as well as making assumption on the required behavior for load/unload requests. Drop the current scheme into a completion-list-based approach; Each flow would try sending the command when possible, allowing one flow to complete another flow's completion and relieve the mailbox before sending its own command. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-27qed: Don't use attention PTT for configuring BWMintz, Yuval1-1/+2
Commit 653d2ffd6405 ("qed*: Fix link indication race") introduced another race - one of the inner functions called from the link-change flow is explicitly using the slowpath context dedicated PTT instead of gaining that PTT from the caller. Since this flow can now be called from a different context as well, we're in risk of the PTT breaking. Fixes: 653d2ffd6405 ("qed*: Fix link indication race") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qed*: Fix link indication raceMintz, Yuval1-4/+14
Driver changes the link properties via communication with the management firmware, and re-reads the resulting link status when it receives an indication that the link has changed. However, there are certain scenarios where such indications might be missing, and so driver also re-reads the current link results without attention in several places. Specifically, it does so during load and when resetting the link. This creates a race where driver might reflect incorrect link status - e.g., when explicit reading of the link status is switched by attention with the changed configuration. Correct this flow by a lock syncronizing the handling of the link indications [both explicit requests and attention]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-19qed: Add support for hardware offloaded FCoE.Arun Easi1-0/+3
This adds the backbone required for the various HW initalizations which are necessary for the FCoE driver (qedf) for QLogic FastLinQ 4xxxx line of adapters - FW notification, resource initializations, etc. Signed-off-by: Arun Easi <arun.easi@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01qed: Conserve RDMA resources when !QEDRRam Amrani1-1/+3
If qedr isn't part of the kernel then don't allocate RDMA resources for it in qed. Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01qed*: Update to dual-licenseMintz, Yuval1-4/+28
Since the submission of the qedr driver, there's inconsistency in the licensing of the various qed/qede files - some are GPLv2 and some are dual-license. Since qedr requires dual-license and it's dependent on both, we're updating the licensing of all qed/qede source files. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09qed: Prevent stack corruption on MFW interactionMintz, Yuval1-4/+12
Driver uses a union for copying data to & from management firmware when interacting with it. Problem is that the function always copies sizeof(union) while commit 2edbff8dcb5d ("qed: Learn resources from management firmware") is casting a union elements which is of smaller size [24-byte instead of 88-bytes]. Also, the union contains some inappropriate elements which increase its size [should have been 32-bytes]. While this shouldn't corrupt other PF messages to the MFW [as management firmware enforces permissions so that each PF is allowed to write only to its own mailbox] we fix this here as well. Fixes: 2edbff8dcb5d ("qed: Learn resources from management firmware") Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qed: Learn resources from management firmwareTomer Tayar1-0/+42
Currently, each interfaces assumes it receives an equal portion of HW/FW resources, but this is wasteful - different partitions [and specifically, parititions exposing different protocol support] might require different resources. Implement a new resource learning scheme where the information is received directly from the management firmware [which has knowledge of all of the functions and can serve as arbiter]. Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qed: Learn of RDMA capabilities per-deviceMintz, Yuval1-8/+70
Today, RDMA capabilities are learned from management firmware which provides a per-device indication for all interfaces. Newer management firmware is capable of providing a per-device indication [would later be extended to either RoCE/iWARP]. Try using this newer learning mechanism, but fallback in case management firmware is too old to retain current functionality. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qed*: Add support for WoLMintz, Yuval1-2/+54
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qed: Add nvram selftestMintz, Yuval1-0/+94
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qed*: Management firmware - notifications and defaultsSudarsana Kalluru1-0/+163
Management firmware is interested in various tidbits about the driver - including the driver state & several configuration related fields [MTU, primtary MAC, etc.]. This adds the necessray logic to update MFW with such configurations, some of which are passed directly via qed while for others APIs are provide so that qede would be able to later configure if needed. This also introduces a new default configuration for MTU which would replace the default inherited by being an ethernet device. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
2016-09-20qed: Fix stack corruption on probeYuval Mintz1-2/+2
Commit fe56b9e6a8d95 ("qed: Add module with basic common support") has introduced a stack corruption during probe, where filling a local struct with data to be sent to management firmware is incorrectly filled; The data is written outside of the struct and corrupts the stack. Changes from v1: ---------------- - Correct the value written [Caught by David Laight] Fixes: fe56b9e6a8d95 ("qed: Add module with basic common support") Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06qed: Add infrastructure for debug data collectionTomer Tayar1-0/+76
Adds support for several infrastructure operations that are done as part of debug data collection. Signed-off-by: Tomer Tayar <Tomer.Tayar@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-06qed: Remove OOM messagesJoe Perches1-1/+0
These messages are unnecessary as OOM allocation failures already do a dump_stack() giving more or less the same information. $ size drivers/net/ethernet/qlogic/qed/built-in.o* (defconfig x86-64) text data bss dec hex filename 127817 27969 32800 188586 2e0aa drivers/net/ethernet/qlogic/qed/built-in.o.new 132474 27969 32800 193243 2f2db drivers/net/ethernet/qlogic/qed/built-in.o.old Miscellanea: o Change allocs to the generally preferred forms where possible. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-19qed: utilize FW 8.10.10.0Yuval Mintz1-28/+0
This new firmware for the qed* adpaters fixes several issues: - Better blocking of malicious VFs. - After FLR, Tx-switching [internal routing] of packets might be incorrect. - Deletion of unicast MAC filters would sometime have side-effect of corrupting the MAC filters configred for a device. It also contains fixes for future qed* drivers that *hopefully* would be sent for review in the near future. In addition, it would allow driver some new functionality, including: - Allowing PF/VF driver compaitibility with old drivers [running pre-8.10.5.0 firmware]. - Better debug facilities. This would also bump the qed* driver versions to 8.10.9.20. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-18qed: Add support for NCSI statistics.Sudarsana Reddy Kalluru1-0/+48
The patch adds driver support for sending the NCSI statistics to the MFW. This is an asynchronous request from MFW. Upon receiving this, driver populates the required data and send it to MFW. Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.