aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/netronome
AgeCommit message (Collapse)AuthorFilesLines
2022-11-21nfp: add framework to support ipsec offloadingHuanhuan Wang10-10/+233
A new metadata type and config structure are introduced to interact with firmware to support ipsec offloading. This feature relies on specific firmware that supports ipsec encrypt/decrypt by advertising related capability bit. The xfrm callbacks which interact with upper layer are implemented in the following patch. Based on initial work of Norm Bagley <[email protected]>. Signed-off-by: Huanhuan Wang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-21nfp: extend capability and control wordsYinjun Zhang3-3/+14
Currently the 32-bit capability word is almost exhausted, now allocate some more words to support new features, and control word is also extended accordingly. Packet-type offloading is implemented in NIC application firmware, but it's not used in kernel driver, so reserve this bit here in case it's redefined for other use. Signed-off-by: Yinjun Zhang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-18nfp: add port from netdev validation for EEPROM accessJaco Coetzee1-0/+3
Setting of the port flag `NFP_PORT_CHANGED`, introduced to ensure the correct reading of EEPROM data, causes a fatal kernel NULL pointer dereference in cases where the target netdev type cannot be determined. Add validation of port struct pointer before attempting to set the `NFP_PORT_CHANGED` flag. Return that operation is not supported if the netdev type cannot be determined. Fixes: 4ae97cae07e1 ("nfp: ethtool: fix the display error of `ethtool -m DEVNAME`") Signed-off-by: Jaco Coetzee <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-18nfp: fill splittable of devlink_port_attrs correctlyDiana Wang1-1/+1
The error is reflected in that it shows wrong splittable status of port when executing "devlink port show". The reason which leads the error is that the assigned operation of splittable is just a simple negation operation of split and it does not consider port lanes quantity. A splittable port should have several lanes that can be split(lanes quantity > 1). If without the judgement, it will show wrong message for some firmware, such as 2x25G, 2x10G. Fixes: a0f49b548652 ("devlink: Add a new devlink port split ability attribute and pass to netlink") Signed-off-by: Diana Wang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+3
include/linux/bpf.h 1f6e04a1c7b8 ("bpf: Fix offset calculation error in __copy_map_value and zero_map_value") aa3496accc41 ("bpf: Refactor kptr_off_tab into btf_record") f71b2f64177a ("bpf: Refactor map->off_arr handling") https://lore.kernel.org/all/[email protected]/ Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-14net: nfp: Remove linux/msi.h includesThomas Gleixner3-3/+0
Nothing in these files needs anything from linux/msi.h Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Acked-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-11nfp: change eeprom length to max length enumeratorsJaco Coetzee1-3/+3
Extend the size of QSFP EEPROM for types SSF8436 and SFF8636 from 256 to 640 bytes in order to expose all the EEPROM pages by ethtool. For SFF-8636 and SFF-8436 specifications, the driver exposes 256 bytes of EEPROM data for ethtool's get_module_eeprom() callback, resulting in "netlink error: Invalid argument" when an EEPROM read with an offset larger than 256 bytes is attempted. Changing the length enumerators to the _MAX_LEN variants exposes all 640 bytes of the EEPROM allowing upper pages 1, 2 and 3 to be read. Fixes: 96d971e307cc ("ethtool: Add fallback to get_module_eeprom from netlink command") Signed-off-by: Jaco Coetzee <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-11nfp: take numa node into account when setting irq affinityYinjun Zhang1-2/+3
Set irq affinity to cpus that belong to the same numa node with NIC device first. Signed-off-by: Yinjun Zhang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-11-03net: remove unused ndo_get_devlink_portJiri Pirko4-16/+0
Remove ndo_get_devlink_port which is no longer used alongside with the implementations in drivers. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-03net: make drivers to use SET_NETDEV_DEVLINK_PORT to set devlink_portJiri Pirko3-21/+4
Benefit from the previously implemented tracking of netdev events in devlink code and instead of calling devlink_port_type_eth_set() and devlink_port_type_clear() to set devlink port type and link to related netdev, use SET_NETDEV_DEVLINK_PORT() macro to assign devlink_port pointer to netdevice which is about to be registered. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner3-10/+10
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-23/+15
include/linux/net.h a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag") e993ffe3da4b ("net: flag sockets supporting msghdr originated zerocopy") Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-24nfp: flower: tunnel neigh support bond offloadYanguo Li4-21/+114
Support hardware offload when tunnel neigh out port is bond. These feature work with the nfp firmware. If the firmware supports the NFP_FL_FEATS_TUNNEL_NEIGH_LAG feature, nfp driver write the bond information to the firmware neighbor table or do nothing for bond. when neighbor MAC changes, nfp driver need to update the neighbor information too. Signed-off-by: Yanguo Li <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-10-21nfp: only clean `sp_indiff` when application firmware is unloadedYinjun Zhang1-23/+15
Currently `sp_indiff` is cleaned when driver is removed. This will cause problem in multi-PF/multi-host case, considering one PF is removed while another is still in use. Since `sp_indiff` is the application firmware property, it should only be cleaned when the firmware is unloaded. Now let management firmware to clean it when necessary, driver only set it. Fixes: b1e4f11e426d ("nfp: refine the ABI of getting `sp_indiff` info") Signed-off-by: Yinjun Zhang <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-10-10nfp: flower: fix incorrect struct type in GRE key_sizeLouis Peens1-2/+2
Looks like a copy-paste error sneaked in here at some point, causing the key_size for these tunnels to be calculated incorrectly. This size ends up being send to the firmware, causing unexpected behaviour in some cases. Fixes: 78a722af4ad9 ("nfp: flower: compile match for IPv6 tunnels") Reported-by: Chaoyong He <[email protected]> Signed-off-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-30nfp: add support restart of link auto-negotiationFei Qin1-0/+33
Add support restart of link auto-negotiation. This may be initiated using: # ethtool -r <intf> Signed-off-by: Fei Qin <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-30nfp: add support for link auto negotiationYinjun Zhang4-5/+33
Report the auto negotiation capability if it's supported in management firmware, and advertise it if it's enabled. Changing port speed is not allowed when autoneg is enabled. The ethtool <intf> command displays the auto-neg capability: # ethtool enp1s0np0 Settings for enp1s0np0: Supported ports: [ FIBRE ] Supported link modes: Not reported Supported pause frame use: Symmetric Supports auto-negotiation: Yes Supported FEC modes: None RS BASER Advertised link modes: Not reported Advertised pause frame use: Symmetric Advertised auto-negotiation: Yes Advertised FEC modes: None RS BASER Speed: 25000Mb/s Duplex: Full Auto-negotiation: on Port: FIBRE PHYAD: 0 Transceiver: internal Link detected: yes Signed-off-by: Yinjun Zhang <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-30nfp: refine the ABI of getting `sp_indiff` infoYinjun Zhang5-65/+71
Considering that whether application firmware is indifferent to port speed is a firmware property instead of port property, now use a new rtsym to get the property instead of parsing per-port tlv caps. With this change, relevant code is moved to `nfp_main` layer. Signed-off-by: Yinjun Zhang <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-30nfp: avoid halt of driver init process when non-fatal error happensYinjun Zhang1-5/+4
It's not a fatal error when setting `hwinfo` into management firmware fails, no need to halt the whole driver initialization process. Signed-off-by: Yinjun Zhang <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-30nfp: add support for reporting active FEC modeYinjun Zhang3-2/+11
The latest management firmware can now report the active FEC mode. Adapt driver accordingly so that user can get the active FEC mode by running command: # ethtool --show-fec <intf> Also correct use of `fec` field. Signed-off-by: Yinjun Zhang <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-29nfp: Use skb_put_data() instead of skb_put/memcpy pairShang XiaoJing1-1/+1
Use skb_put_data() instead of skb_put() and memcpy(), which is clear. Signed-off-by: Shang XiaoJing <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-3/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <[email protected]> # for CAN Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20nfp: flower: support vlan action in pre_ctHui Zhou1-1/+48
Support hardware offload of rule which has both vlan push/pop/mangle and ct action. Signed-off-by: Hui Zhou <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20nfp: flower: support hw offload for ct nat actionHui Zhou2-7/+192
support ct nat action when pre_ct merge with post_ct and nft. at the same time, add the extra checksum action and hardware stats for nft to meet the action check when do nat. Signed-off-by: Hui Zhou <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20nfp: flower: add validation of for police actions which are independent of flowsZiyang Chen1-8/+23
Validation of police actions was added to offload drivers in commit d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") This patch extends that validation in the nfp driver to include police actions which are created independently of flows. Signed-off-by: Ziyang Chen <[email protected]> Reviewed-by: Baowen Zheng <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-20tcp: Access &tcp_hashinfo via net.Kuniyuki Iwashima1-2/+3
We will soon introduce an optional per-netns ehash. This means we cannot use tcp_hashinfo directly in most places. Instead, access it via net->ipv4.tcp_death_row.hashinfo. The access will be valid only while initialising tcp_hashinfo itself and creating/destroying each netns. Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski4-10/+12
tools/testing/selftests/net/.gitignore sort the net-next version and use it Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-31net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang1-3/+3
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Petr Machata <[email protected]> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <[email protected]> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <[email protected]> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <[email protected]> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <[email protected]> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <[email protected]> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <[email protected]> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-30nfp: fix the access to management firmware hangingGao Xiao1-0/+1
When running `ethtool -p` with the old management firmware, the management firmware resource is not correctly released, which causes firmware related malfunction: all the access to management firmware hangs. It releases the management firmware resource when set id mode operation is not supported. Fixes: ccb9bc1dfa44 ("nfp: add 'ethtool --identify' support") Signed-off-by: Gao Xiao <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Reviewed-by: Jesse Brandeburg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-30nfp: add support for eeprom get and set commandBaowen Zheng1-0/+157
Add support for eeprom get and set operation with ethtool command. with this change, we can support commands as: #ethtool -e enp101s0np0 offset 0 length 6 Offset Values ------ ------ 0x0000: 00 15 4d 16 66 33 #ethtool -E enp101s0np0 magic 0x400019ee offset 5 length 1 value 0x88 We make this change to persist MAC change during driver reload and system reboot. Signed-off-by: Baowen Zheng <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-08-30nfp: check if application firmware is indifferent to port speedYinjun Zhang4-1/+59
A new tlv type is introduced to indicate if application firmware is indifferent to port speed, and inform management firmware of the result. And the result is always true for flower application firmware since it's indifferent to port speed from the start and will never change. Signed-off-by: Yinjun Zhang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-08-30nfp: propagate port speed from management firmwareYinjun Zhang6-24/+79
In future releases the NIC application firmware may be indifferent to port speeds - not built for specific port speeds - and consequently it will not be able to report VF port speeds to the driver without first learning them. With this change, the driver will pass the speed of physical ports from management firmware to application firmware, and the latter will copy the speed of port 0 to all the active VFs. So that the driver can get VF port speed as before. The port speed of a VF may be requested from userspace using: ethtool <vf-intf> Signed-off-by: Yinjun Zhang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-08-29net: Use u64_stats_fetch_begin_irq() for stats fetch.Sebastian Andrzej Siewior2-8/+8
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the reader is in preemptible context and the writer side (u64_stats_update_begin*()) runs in an interrupt context (IRQ or softirq) then the writer can update the stats during the read operation. This update remains undetected. Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP are not interrupted by a writer. 32bit-SMP remains unaffected by this change. Cc: "David S. Miller" <[email protected]> Cc: Catherine Sullivan <[email protected]> Cc: David Awogbemila <[email protected]> Cc: Dimitris Michailidis <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Hans Ulli Kroll <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Jeroen de Borst <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: Simon Horman <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-08-26nfp: flower: fix ingress police using matchall filterTianyu Yuan1-2/+3
Referenced commit introduced nfp_policer_validate in the progress installing rate limiter. This validate check the action id and will reject police with CONTINUE, which is required to support ingress police offload. Fix this issue by allowing FLOW_ACTION_CONTINUE as notexceed action id in nfp_policer_validate Fixes: d97b4b105ce7 ("flow_offload: reject offload for all drivers with invalid police parameters") Signed-off-by: Tianyu Yuan <[email protected]> Reviewed-by: Baowen Zheng <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-25nfp: flower: support case of match on ct_state(0/0x3f)Wenjuan Geng1-2/+7
is_post_ct_flow() function will process only ct_state ESTABLISHED, then offload_pre_check() function will check FLOW_DISSECTOR_KEY_CT flag. When config tc filter match ct_state(0/0x3f), dissector->used_keys with FLOW_DISSECTOR_KEY_CT bit, function offload_pre_check() will return false, so not offload. This is a special case that can be handled safely. Therefore, modify to let initial packet which won't go through conntrack can be offloaded, as long as the cared ct fields are all zero. Signed-off-by: Wenjuan Geng <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-08-11nfp: fix use-after-free in area_cache_get()Jialiang Wang1-1/+2
area_cache_get() is used to distribute cache->area and set cache->id, and if cache->id is not 0 and cache->area->kref refcount is 0, it will release the cache->area by nfp_cpp_area_release(). area_cache_get() set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire(). But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is is already set but the refcount is not increased as expected. At this time, calling the nfp_cpp_area_release() will cause use-after-free. To avoid the use-after-free, set cache->id after area_init() and nfp_cpp_area_acquire() complete successfully. Note: This vulnerability is triggerable by providing emulated device equipped with specified configuration. BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1 Call Trace: <TASK> nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884) Allocated by task 1: nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303) nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802) nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230) nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215) nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744) Freed by task 1: kfree (mm/slub.c:4562) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873) nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973) nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48) Signed-off-by: Jialiang Wang <[email protected]> Reviewed-by: Yinjun Zhang <[email protected]> Acked-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-03nfp: ethtool: fix the display error of `ethtool -m DEVNAME`Yu Xiao1-0/+2
The port flag isn't set to `NFP_PORT_CHANGED` when using `ethtool -m DEVNAME` before, so the port state (e.g. interface) cannot be updated. Therefore, it caused that `ethtool -m DEVNAME` sometimes cannot read the correct information. E.g. `ethtool -m DEVNAME` cannot work when load driver before plug in optical module, as the port interface is still NONE without port update. Now update the port state before sending info to NIC to ensure that port interface is correct (latest state). Fixes: 61f7c6f44870 ("nfp: implement ethtool get module EEPROM") Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Yu Xiao <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-08-01nfp: flower: add support for tunnel offload without key IDBaowen Zheng1-7/+8
Currently nfp driver will reject to offload tunnel key action without tunnel key ID which means tunnel ID is 0. But it is a normal case for tc flower since user can setup a tunnel with tunnel ID is 0. So we need to support this case to accept tunnel key action without tunnel key ID. Signed-off-by: Baowen Zheng <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-25nfp: bpf: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <[email protected]> Acked-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
No conflicts. Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-15ip: Fix data-races around sysctl_ip_default_ttl.Kuniyuki Iwashima1-1/+1
While reading sysctl_ip_default_ttl, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-07-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-13/+38
include/net/sock.h 310731e2f161 ("net: Fix data-races around sysctl_mem.") e70f3c701276 ("Revert "net: set SK_MEM_QUANTUM to 4096"") https://lore.kernel.org/all/[email protected]/ net/ipv4/fib_semantics.c 747c14307214 ("ip: fix dflt addr selection for connected nexthop") d62607c3fe45 ("net: rename reference+tracking helpers") net/tls/tls.h include/net/tls.h 3d8c51b25a23 ("net/tls: Check for errors in tls_device_init") 587903142308 ("tls: create an internal header") Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-14nfp: flower: configure tunnel neighbour on cmsg rxTianyu Yuan1-5/+13
nfp_tun_write_neigh() function will configure a tunnel neighbour when calling nfp_tun_neigh_event_handler() or nfp_flower_cmsg_process_one_rx() (with no tunnel neighbour type) from firmware. When configuring IP on physical port as a tunnel endpoint, no operation will be performed after receiving the cmsg mentioned above. Therefore, add a progress to configure tunnel neighbour in this case. v2: Correct format of fixes tag. Fixes: f1df7956c11f ("nfp: flower: rework tunnel neighbour configuration") Signed-off-by: Tianyu Yuan <[email protected]> Reviewed-by: Louis Peens <[email protected]> Reviewed-by: Baowen Zheng <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-12nfp: support TX VLAN ctag insert in NFDKDiana Wang3-31/+35
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. This features is currently implemented only for NFD3 and this patch adds support for it with NFDK. Signed-off-by: Diana Wang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-12nfp: fix clang -Wformat warningsJustin Stitt2-2/+2
When building with Clang we encounter these warnings: | drivers/net/ethernet/netronome/nfp/nfp_app.c:233:99: error: format | specifies type 'unsigned char' but the argument has underlying type | 'unsigned int' [-Werror,-Wformat] nfp_err(pf->cpp, "unknown FW app ID | 0x%02hhx, driver too old or support for FW not built in\n", id); - | drivers/net/ethernet/netronome/nfp/nfp_main.c:396:11: error: format | specifies type 'unsigned char' but the argument has type 'int' | [-Werror,-Wformat] serial, interface >> 8, interface & 0xff); Correct format specifier for `id` is `%x` since the default type for the `nfp_app_id` enum is `unsigned int`. The second warning is also solved by using the `%x` format specifier as the expressions involving `interface` are implicity promoted to integers (%x is used to maintain hexadecimal representation). Link: https://github.com/ClangBuiltLinux/linux/issues/378 Signed-off-by: Justin Stitt <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-07-09nfp: fix issue of skb segments exceeds descriptor limitationBaowen Zheng1-8/+25
TCP packets will be dropped if the segments number in the tx skb exceeds limitation when sending iperf3 traffic with --zerocopy option. we make the following changes: Get nr_frags in nfp_nfdk_tx_maybe_close_block instead of passing from outside because it will be changed after skb_linearize operation. Fill maximum dma_len in first tx descriptor to make sure the whole head is included in the first descriptor. Fixes: c10d12e3dce8 ("nfp: add support for NFDK data path") Signed-off-by: Baowen Zheng <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-07-06nfp: enable TSO by default for nfp netdevSimon Horman2-7/+5
We can benefit from TSO when the host CPU is not powerful enough, so enable it by default now. Signed-off-by: Yinjun Zhang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-07-06nfp: allow TSO packets with metadata prepended in NFDK pathYinjun Zhang1-17/+0
Packets with metadata prepended can be correctly handled in firmware when TSO is enabled, now remove the error path and related comments. Since there's no existing firmware that uses prepended metadata, no need to add compatibility check here. Signed-off-by: Yinjun Zhang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-07-04nfp: support TX VLAN ctag insertDiana Wang5-19/+45
Add support for TX VLAN ctag insert which may be configured via ethtool. e.g. # ethtool -K $DEV tx-vlan-offload on The NIC supplies VLAN insert information as packet metadata. The fields of this VLAN metadata are gotten from sk_buff, including vlan_proto and vlan tag. Configuration control bit NFP_NET_CFG_CTRL_TXVLAN_V2 is to signal availability of ctag-insert features of the firmware. NFDK is used to communicate via PCIE to NFP-3800 based NICs while NFD3 is used for other NICs supported by the NFP driver. The metadata format on tx side of NFD3 is different from NFDK. This feature is not currently implemented for NFDK. Signed-off-by: Diana Wang <[email protected]> Reviewed-by: Louis Peens <[email protected]> Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.