| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2020-09-25 | drivers/net/ethernet: clean up mis-targeted comments | Jesse Brandeburg | 1 | -1/+1 | |
| As part of the W=1 cleanups for ethernet, a million [*] driver comments had to be cleaned up to get the W=1 compilation to succeed. This change finally makes the drivers/net/ethernet tree compile with W=1 set on the command line. NOTE: The kernel uses kdoc style (see Documentation/process/kernel-doc.rst) when documenting code, not doxygen or other styles. After this patch the x86_64 build has no warnings from W=1, however scripts/kernel-doc says there are 1545 more warnings in source files, that I need to develop a script to fix in a followup patch. The errors fixed here are all kdoc of a few classes, with a few outliers: In file included from drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c:10: drivers/net/ethernet/qlogic/netxen/netxen_nic.h:1193:18: warning: ‘FW_DUMP_LEVELS’ defined but not used [-Wunused-const-variable=] 1193 | static const u32 FW_DUMP_LEVELS[] = { 0x3, 0x7, 0xf, 0x1f, 0x3f, 0x7f, 0xff }; | ^~~~~~~~~~~~~~ ... repeats 4 times... drivers/net/ethernet/sun/cassini.c:2084:24: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body] 2084 | RX_USED_ADD(page, i); drivers/net/ethernet/natsemi/ns83820.c: In function ‘phy_intr’: drivers/net/ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] 603 | u32 tbisr, tanar, tanlpar; | ^~~~~ drivers/net/ethernet/natsemi/ns83820.c: In function ‘ns83820_get_link_ksettings’: drivers/net/ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] 1207 | u32 cfg, tanar, tbicr; | ^~~~~ drivers/net/ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] 1063 | int data_size, yf_size; | ^~~~~~~ Normal kdoc fixes: warning: Function parameter or member 'x' not described in 'y' warning: Excess function parameter 'x' description in 'y' warning: Cannot understand <string> on line <NNN> - I thought it was a doc line [*] - ok it wasn't quite a million, but it felt like it. Signed-off-by: Jesse Brandeburg <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-09-25 | drivers/net/ethernet: clean up unused assignments | Jesse Brandeburg | 1 | -4/+2 | |
| As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg <[email protected]> Acked-by: Edward Cree <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-09-23 | net: microchip: Make `lan743x_pm_suspend` function return right value | Zheng Yongjun | 1 | -4/+1 | |
| drivers/net/ethernet/microchip/lan743x_main.c: In function lan743x_pm_suspend: `ret` is set but not used. In fact, `pci_prepare_to_sleep` function value should be the right value of `lan743x_pm_suspend` function, therefore, fix it. Signed-off-by: Zheng Yongjun <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-08-23 | treewide: Use fallthrough pseudo-keyword | Gustavo A. R. Silva | 1 | -1/+1 | |
| Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <[email protected]> | |||||
| 2020-07-22 | lan743x: remove redundant initialization of variable current_head_index | Colin Ian King | 1 | -2/+1 | |
| The variable current_head_index is being initialized with a value that is never read and it is being updated later with a new value. Replace the initialization of -1 with the latter assignment. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-07-14 | lan743x: switch from 'pci_' to 'dma_' API | Christophe JAILLET | 1 | -24/+22 | |
| The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GPF_ with a correct flag. It has been compile tested. When memory is allocated in 'lan743x_tx_ring_cleanup()' and 'lan743x_rx_ring_init()', GFP_KERNEL can be used because this flag is already used to allocate some memory in these functions. While at it, remove a useless (void *) casting in the first hunk in so that the code is more consistent. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-06-24 | lan743x: Remove duplicated include from lan743x_main.c | YueHaibing | 1 | -1/+0 | |
| Remove duplicated include. Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-06-18 | lan743x: allow mac address to come from dt | Tim Harvey | 1 | -16/+25 | |
| If a valid mac address is present in dt, use that before using CSR's or a random mac address. Signed-off-by: Tim Harvey <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-06-16 | lan743x: add MODULE_DEVICE_TABLE for module loading alias | Tim Harvey | 1 | -0/+2 | |
| Without a MODULE_DEVICE_TABLE the attributes are missing that create an alias for auto-loading the module in userspace via hotplug. Signed-off-by: Tim Harvey <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-06-14 | treewide: replace '---help---' in Kconfig files with 'help' | Masahiro Yamada | 1 | -5/+5 | |
| Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <[email protected]> | |||||
| 2020-06-04 | lan743x: Use correct MAC_CR configuration for 1 GBit speed | Roelof Berg | 1 | -1/+1 | |
| Corrected the MAC_CR configuration bits for 1 GBit operation. The data sheet allows MAC_CR(2:1) to be 10 and also 11 for 1 GBit/s speed, but only 10 works correctly. Devices tested: Microchip Lan7431, fixed-phy mode Microchip Lan7430, normal phy mode Fixes: 6f197fb63850 ("lan743x: Added fixed link and RGMII support") Signed-off-by: Roelof Berg <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-06-01 | lan743x: Added fixed link and RGMII support | Roelof Berg | 4 | -13/+80 | |
| Microchip lan7431 is frequently connected to a phy. However, it can also be directly connected to a MII remote peer without any phy in between. For supporting such a phyless hardware setup in Linux we utilized phylib, which supports a fixed-link configuration via the device tree. And we added support for defining the connection type R/GMII in the device tree. New behavior: ------------- . The automatic speed and duplex detection of the lan743x silicon between mac and phy is disabled. Instead phylib is used like in other typical Linux drivers. The usage of phylib allows to specify fixed-link parameters in the device tree. . The device tree entry phy-connection-type is supported now with the modes RGMII or (G)MII (default). Development state: ------------------ . Tested with fixed-phy configurations. Not yet tested in normal configurations with phy. Microchip kindly offered testing as soon as the Corona measures allow this. . All review findings of Andrew Lunn are included Example: -------- &pcie { status = "okay"; host@0 { reg = <0 0 0 0 0>; #address-cells = <3>; #size-cells = <2>; ethernet@0 { compatible = "weyland-yutani,noscom1", "microchip,lan743x"; status = "okay"; reg = <0 0 0 0 0>; phy-connection-type = "rgmii"; fixed-link { speed = <100>; full-duplex; }; }; }; }; Signed-off-by: Roelof Berg <[email protected]> Signed-off-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-05-15 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -1/+4 | |
| Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-05-07 | net: microchip: encx24j600: add missed kthread_stop | Chuhong Yuan | 1 | -1/+4 | |
| This driver calls kthread_run() in probe, but forgets to call kthread_stop() in probe failure and remove. Add the missed kthread_stop() to fix it. Signed-off-by: Chuhong Yuan <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-05-07 | net: encx24j600: make encx24j600_hw_init() return void | Jason Yan | 1 | -10/+2 | |
| This function always return 0 now, we can make it return void to simplify the code. This fixes the following coccicheck warning: drivers/net/ethernet/microchip/encx24j600.c:609:5-8: Unneeded variable: "ret". Return "0" on line 653 Signed-off-by: Jason Yan <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2020-05-05 | net: microchip: Remove unused inline function is_bits_set | YueHaibing | 1 | -5/+0 | |
| There's no callers in-tree. Signed-off-by: YueHaibing <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-12-25 | net: Introduce peer to peer one step PTP time stamping. | Richard Cochran | 1 | -0/+3 | |
| The 1588 standard defines one step operation for both Sync and PDelay_Resp messages. Up until now, hardware with P2P one step has been rare, and kernel support was lacking. This patch adds support of the mode in anticipation of new hardware developments. Signed-off-by: Richard Cochran <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-12-12 | netdev: pass the stuck queue to the timeout handler | Michael S. Tsirkin | 2 | -2/+2 | |
| This allows incrementing the correct timeout statistic without any mess. Down the road, devices can learn to reset just the specific queue. The patch was generated with the following script: use strict; use warnings; our $^I = '.bak'; my @work = ( ["arch/m68k/emu/nfeth.c", "nfeth_tx_timeout"], ["arch/um/drivers/net_kern.c", "uml_net_tx_timeout"], ["arch/um/drivers/vector_kern.c", "vector_net_tx_timeout"], ["arch/xtensa/platforms/iss/network.c", "iss_net_tx_timeout"], ["drivers/char/pcmcia/synclink_cs.c", "hdlcdev_tx_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/infiniband/ulp/ipoib/ipoib_main.c", "ipoib_timeout"], ["drivers/message/fusion/mptlan.c", "mpt_lan_tx_timeout"], ["drivers/misc/sgi-xp/xpnet.c", "xpnet_dev_tx_timeout"], ["drivers/net/appletalk/cops.c", "cops_timeout"], ["drivers/net/arcnet/arcdevice.h", "arcnet_timeout"], ["drivers/net/arcnet/arcnet.c", "arcnet_timeout"], ["drivers/net/arcnet/com20020.c", "arcnet_timeout"], ["drivers/net/ethernet/3com/3c509.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c515.c", "corkscrew_timeout"], ["drivers/net/ethernet/3com/3c574_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c589_cs.c", "el3_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/3c59x.c", "vortex_tx_timeout"], ["drivers/net/ethernet/3com/typhoon.c", "typhoon_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390.h", "eip_tx_timeout"], ["drivers/net/ethernet/8390/8390.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/8390p.c", "eip_tx_timeout"], ["drivers/net/ethernet/8390/ax88796.c", "ax_ei_tx_timeout"], ["drivers/net/ethernet/8390/axnet_cs.c", "axnet_tx_timeout"], ["drivers/net/ethernet/8390/etherh.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/hydra.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mac8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/mcf8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/lib8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/8390/ne2k-pci.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/pcnet_cs.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/smc-ultra.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/wd.c", "ei_tx_timeout"], ["drivers/net/ethernet/8390/zorro8390.c", "__ei_tx_timeout"], ["drivers/net/ethernet/adaptec/starfire.c", "tx_timeout"], ["drivers/net/ethernet/agere/et131x.c", "et131x_tx_timeout"], ["drivers/net/ethernet/allwinner/sun4i-emac.c", "emac_timeout"], ["drivers/net/ethernet/alteon/acenic.c", "ace_watchdog"], ["drivers/net/ethernet/amazon/ena/ena_netdev.c", "ena_tx_timeout"], ["drivers/net/ethernet/amd/7990.h", "lance_tx_timeout"], ["drivers/net/ethernet/amd/7990.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/a2065.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/am79c961a.c", "am79c961_timeout"], ["drivers/net/ethernet/amd/amd8111e.c", "amd8111e_tx_timeout"], ["drivers/net/ethernet/amd/ariadne.c", "ariadne_tx_timeout"], ["drivers/net/ethernet/amd/atarilance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/au1000_eth.c", "au1000_tx_timeout"], ["drivers/net/ethernet/amd/declance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/lance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/mvme147.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/ni65.c", "ni65_timeout"], ["drivers/net/ethernet/amd/nmclan_cs.c", "mace_tx_timeout"], ["drivers/net/ethernet/amd/pcnet32.c", "pcnet32_tx_timeout"], ["drivers/net/ethernet/amd/sunlance.c", "lance_tx_timeout"], ["drivers/net/ethernet/amd/xgbe/xgbe-drv.c", "xgbe_tx_timeout"], ["drivers/net/ethernet/apm/xgene-v2/main.c", "xge_timeout"], ["drivers/net/ethernet/apm/xgene/xgene_enet_main.c", "xgene_enet_timeout"], ["drivers/net/ethernet/apple/macmace.c", "mace_tx_timeout"], ["drivers/net/ethernet/atheros/ag71xx.c", "ag71xx_tx_timeout"], ["drivers/net/ethernet/atheros/alx/main.c", "alx_tx_timeout"], ["drivers/net/ethernet/atheros/atl1c/atl1c_main.c", "atl1c_tx_timeout"], ["drivers/net/ethernet/atheros/atl1e/atl1e_main.c", "atl1e_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl1.c", "atlx_tx_timeout"], ["drivers/net/ethernet/atheros/atlx/atl2.c", "atl2_tx_timeout"], ["drivers/net/ethernet/broadcom/b44.c", "b44_tx_timeout"], ["drivers/net/ethernet/broadcom/bcmsysport.c", "bcm_sysport_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2.c", "bnx2_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c", "bnx2x_tx_timeout"], ["drivers/net/ethernet/broadcom/bnxt/bnxt.c", "bnxt_tx_timeout"], ["drivers/net/ethernet/broadcom/genet/bcmgenet.c", "bcmgenet_timeout"], ["drivers/net/ethernet/broadcom/sb1250-mac.c", "sbmac_tx_timeout"], ["drivers/net/ethernet/broadcom/tg3.c", "tg3_tx_timeout"], ["drivers/net/ethernet/calxeda/xgmac.c", "xgmac_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_main.c", "liquidio_tx_timeout"], ["drivers/net/ethernet/cavium/liquidio/lio_vf_rep.c", "lio_vf_rep_tx_timeout"], ["drivers/net/ethernet/cavium/thunder/nicvf_main.c", "nicvf_tx_timeout"], ["drivers/net/ethernet/cirrus/cs89x0.c", "net_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cisco/enic/enic_main.c", "enic_tx_timeout"], ["drivers/net/ethernet/cortina/gemini.c", "gmac_tx_timeout"], ["drivers/net/ethernet/davicom/dm9000.c", "dm9000_timeout"], ["drivers/net/ethernet/dec/tulip/de2104x.c", "de_tx_timeout"], ["drivers/net/ethernet/dec/tulip/tulip_core.c", "tulip_tx_timeout"], ["drivers/net/ethernet/dec/tulip/winbond-840.c", "tx_timeout"], ["drivers/net/ethernet/dlink/dl2k.c", "rio_tx_timeout"], ["drivers/net/ethernet/dlink/sundance.c", "tx_timeout"], ["drivers/net/ethernet/emulex/benet/be_main.c", "be_tx_timeout"], ["drivers/net/ethernet/ethoc.c", "ethoc_tx_timeout"], ["drivers/net/ethernet/faraday/ftgmac100.c", "ftgmac100_tx_timeout"], ["drivers/net/ethernet/fealnx.c", "fealnx_tx_timeout"], ["drivers/net/ethernet/freescale/dpaa/dpaa_eth.c", "dpaa_tx_timeout"], ["drivers/net/ethernet/freescale/fec_main.c", "fec_timeout"], ["drivers/net/ethernet/freescale/fec_mpc52xx.c", "mpc52xx_fec_tx_timeout"], ["drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c", "fs_timeout"], ["drivers/net/ethernet/freescale/gianfar.c", "gfar_timeout"], ["drivers/net/ethernet/freescale/ucc_geth.c", "ucc_geth_timeout"], ["drivers/net/ethernet/fujitsu/fmvj18x_cs.c", "fjn_tx_timeout"], ["drivers/net/ethernet/google/gve/gve_main.c", "gve_tx_timeout"], ["drivers/net/ethernet/hisilicon/hip04_eth.c", "hip04_timeout"], ["drivers/net/ethernet/hisilicon/hix5hd2_gmac.c", "hix5hd2_net_timeout"], ["drivers/net/ethernet/hisilicon/hns/hns_enet.c", "hns_nic_net_timeout"], ["drivers/net/ethernet/hisilicon/hns3/hns3_enet.c", "hns3_nic_net_timeout"], ["drivers/net/ethernet/huawei/hinic/hinic_main.c", "hinic_tx_timeout"], ["drivers/net/ethernet/i825xx/82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/ether1.c", "ether1_timeout"], ["drivers/net/ethernet/i825xx/lib82596.c", "i596_tx_timeout"], ["drivers/net/ethernet/i825xx/sun3_82586.c", "sun3_82586_timeout"], ["drivers/net/ethernet/ibm/ehea/ehea_main.c", "ehea_tx_watchdog"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/emac/core.c", "emac_tx_timeout"], ["drivers/net/ethernet/ibm/ibmvnic.c", "ibmvnic_tx_timeout"], ["drivers/net/ethernet/intel/e100.c", "e100_tx_timeout"], ["drivers/net/ethernet/intel/e1000/e1000_main.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/e1000e/netdev.c", "e1000_tx_timeout"], ["drivers/net/ethernet/intel/fm10k/fm10k_netdev.c", "fm10k_tx_timeout"], ["drivers/net/ethernet/intel/i40e/i40e_main.c", "i40e_tx_timeout"], ["drivers/net/ethernet/intel/iavf/iavf_main.c", "iavf_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/ice/ice_main.c", "ice_tx_timeout"], ["drivers/net/ethernet/intel/igb/igb_main.c", "igb_tx_timeout"], ["drivers/net/ethernet/intel/igbvf/netdev.c", "igbvf_tx_timeout"], ["drivers/net/ethernet/intel/ixgb/ixgb_main.c", "ixgb_tx_timeout"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c", "adapter->netdev->netdev_ops->ndo_tx_timeout(adapter->netdev);"], ["drivers/net/ethernet/intel/ixgbe/ixgbe_main.c", "ixgbe_tx_timeout"], ["drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c", "ixgbevf_tx_timeout"], ["drivers/net/ethernet/jme.c", "jme_tx_timeout"], ["drivers/net/ethernet/korina.c", "korina_tx_timeout"], ["drivers/net/ethernet/lantiq_etop.c", "ltq_etop_tx_timeout"], ["drivers/net/ethernet/marvell/mv643xx_eth.c", "mv643xx_eth_tx_timeout"], ["drivers/net/ethernet/marvell/pxa168_eth.c", "pxa168_eth_tx_timeout"], ["drivers/net/ethernet/marvell/skge.c", "skge_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/marvell/sky2.c", "sky2_tx_timeout"], ["drivers/net/ethernet/mediatek/mtk_eth_soc.c", "mtk_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx4/en_netdev.c", "mlx4_en_tx_timeout"], ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c", "mlx5e_tx_timeout"], ["drivers/net/ethernet/micrel/ks8842.c", "ks8842_tx_timeout"], ["drivers/net/ethernet/micrel/ksz884x.c", "netdev_tx_timeout"], ["drivers/net/ethernet/microchip/enc28j60.c", "enc28j60_tx_timeout"], ["drivers/net/ethernet/microchip/encx24j600.c", "encx24j600_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.h", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/sonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/jazzsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/macsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/natsemi/natsemi.c", "ns_tx_timeout"], ["drivers/net/ethernet/natsemi/ns83820.c", "ns83820_tx_timeout"], ["drivers/net/ethernet/natsemi/xtsonic.c", "sonic_tx_timeout"], ["drivers/net/ethernet/neterion/s2io.h", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/s2io.c", "s2io_tx_watchdog"], ["drivers/net/ethernet/neterion/vxge/vxge-main.c", "vxge_tx_watchdog"], ["drivers/net/ethernet/netronome/nfp/nfp_net_common.c", "nfp_net_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/nvidia/forcedeth.c", "nv_tx_timeout"], ["drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c", "pch_gbe_tx_timeout"], ["drivers/net/ethernet/packetengines/hamachi.c", "hamachi_tx_timeout"], ["drivers/net/ethernet/packetengines/yellowfin.c", "yellowfin_tx_timeout"], ["drivers/net/ethernet/pensando/ionic/ionic_lif.c", "ionic_tx_timeout"], ["drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c", "netxen_tx_timeout"], ["drivers/net/ethernet/qlogic/qla3xxx.c", "ql3xxx_tx_timeout"], ["drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c", "qlcnic_tx_timeout"], ["drivers/net/ethernet/qualcomm/emac/emac.c", "emac_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_spi.c", "qcaspi_netdev_tx_timeout"], ["drivers/net/ethernet/qualcomm/qca_uart.c", "qcauart_netdev_tx_timeout"], ["drivers/net/ethernet/rdc/r6040.c", "r6040_tx_timeout"], ["drivers/net/ethernet/realtek/8139cp.c", "cp_tx_timeout"], ["drivers/net/ethernet/realtek/8139too.c", "rtl8139_tx_timeout"], ["drivers/net/ethernet/realtek/atp.c", "tx_timeout"], ["drivers/net/ethernet/realtek/r8169_main.c", "rtl8169_tx_timeout"], ["drivers/net/ethernet/renesas/ravb_main.c", "ravb_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/renesas/sh_eth.c", "sh_eth_tx_timeout"], ["drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c", "sxgbe_tx_timeout"], ["drivers/net/ethernet/seeq/ether3.c", "ether3_timeout"], ["drivers/net/ethernet/seeq/sgiseeq.c", "timeout"], ["drivers/net/ethernet/sfc/efx.c", "efx_watchdog"], ["drivers/net/ethernet/sfc/falcon/efx.c", "ef4_watchdog"], ["drivers/net/ethernet/sgi/ioc3-eth.c", "ioc3_timeout"], ["drivers/net/ethernet/sgi/meth.c", "meth_tx_timeout"], ["drivers/net/ethernet/silan/sc92031.c", "sc92031_tx_timeout"], ["drivers/net/ethernet/sis/sis190.c", "sis190_tx_timeout"], ["drivers/net/ethernet/sis/sis900.c", "sis900_tx_timeout"], ["drivers/net/ethernet/smsc/epic100.c", "epic_tx_timeout"], ["drivers/net/ethernet/smsc/smc911x.c", "smc911x_timeout"], ["drivers/net/ethernet/smsc/smc9194.c", "smc_timeout"], ["drivers/net/ethernet/smsc/smc91c92_cs.c", "smc_tx_timeout"], ["drivers/net/ethernet/smsc/smc91x.c", "smc_timeout"], ["drivers/net/ethernet/stmicro/stmmac/stmmac_main.c", "stmmac_tx_timeout"], ["drivers/net/ethernet/sun/cassini.c", "cas_tx_timeout"], ["drivers/net/ethernet/sun/ldmvsw.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/niu.c", "niu_tx_timeout"], ["drivers/net/ethernet/sun/sunbmac.c", "bigmac_tx_timeout"], ["drivers/net/ethernet/sun/sungem.c", "gem_tx_timeout"], ["drivers/net/ethernet/sun/sunhme.c", "happy_meal_tx_timeout"], ["drivers/net/ethernet/sun/sunqe.c", "qe_tx_timeout"], ["drivers/net/ethernet/sun/sunvnet.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.c", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/sun/sunvnet_common.h", "sunvnet_tx_timeout_common"], ["drivers/net/ethernet/synopsys/dwc-xlgmac-net.c", "xlgmac_tx_timeout"], ["drivers/net/ethernet/ti/cpmac.c", "cpmac_tx_timeout"], ["drivers/net/ethernet/ti/cpsw.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.c", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/cpsw_priv.h", "cpsw_ndo_tx_timeout"], ["drivers/net/ethernet/ti/davinci_emac.c", "emac_dev_tx_timeout"], ["drivers/net/ethernet/ti/netcp_core.c", "netcp_ndo_tx_timeout"], ["drivers/net/ethernet/ti/tlan.c", "tlan_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.h", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_net.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/ps3_gelic_wireless.c", "gelic_net_tx_timeout"], ["drivers/net/ethernet/toshiba/spider_net.c", "spider_net_tx_timeout"], ["drivers/net/ethernet/toshiba/tc35815.c", "tc35815_tx_timeout"], ["drivers/net/ethernet/via/via-rhine.c", "rhine_tx_timeout"], ["drivers/net/ethernet/wiznet/w5100.c", "w5100_tx_timeout"], ["drivers/net/ethernet/wiznet/w5300.c", "w5300_tx_timeout"], ["drivers/net/ethernet/xilinx/xilinx_emaclite.c", "xemaclite_tx_timeout"], ["drivers/net/ethernet/xircom/xirc2ps_cs.c", "xirc_tx_timeout"], ["drivers/net/fjes/fjes_main.c", "fjes_tx_retry"], ["drivers/net/slip/slip.c", "sl_tx_timeout"], ["include/linux/usb/usbnet.h", "usbnet_tx_timeout"], ["drivers/net/usb/aqc111.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/asix_devices.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88172a.c", "usbnet_tx_timeout"], ["drivers/net/usb/ax88179_178a.c", "usbnet_tx_timeout"], ["drivers/net/usb/catc.c", "catc_tx_timeout"], ["drivers/net/usb/cdc_mbim.c", "usbnet_tx_timeout"], ["drivers/net/usb/cdc_ncm.c", "usbnet_tx_timeout"], ["drivers/net/usb/dm9601.c", "usbnet_tx_timeout"], ["drivers/net/usb/hso.c", "hso_net_tx_timeout"], ["drivers/net/usb/int51x1.c", "usbnet_tx_timeout"], ["drivers/net/usb/ipheth.c", "ipheth_tx_timeout"], ["drivers/net/usb/kaweth.c", "kaweth_tx_timeout"], ["drivers/net/usb/lan78xx.c", "lan78xx_tx_timeout"], ["drivers/net/usb/mcs7830.c", "usbnet_tx_timeout"], ["drivers/net/usb/pegasus.c", "pegasus_tx_timeout"], ["drivers/net/usb/qmi_wwan.c", "usbnet_tx_timeout"], ["drivers/net/usb/r8152.c", "rtl8152_tx_timeout"], ["drivers/net/usb/rndis_host.c", "usbnet_tx_timeout"], ["drivers/net/usb/rtl8150.c", "rtl8150_tx_timeout"], ["drivers/net/usb/sierra_net.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc75xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/smsc95xx.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9700.c", "usbnet_tx_timeout"], ["drivers/net/usb/sr9800.c", "usbnet_tx_timeout"], ["drivers/net/usb/usbnet.c", "usbnet_tx_timeout"], ["drivers/net/vmxnet3/vmxnet3_drv.c", "vmxnet3_tx_timeout"], ["drivers/net/wan/cosa.c", "cosa_net_timeout"], ["drivers/net/wan/farsync.c", "fst_tx_timeout"], ["drivers/net/wan/fsl_ucc_hdlc.c", "uhdlc_tx_timeout"], ["drivers/net/wan/lmc/lmc_main.c", "lmc_driver_timeout"], ["drivers/net/wan/x25_asy.c", "x25_asy_timeout"], ["drivers/net/wimax/i2400m/netdev.c", "i2400m_tx_timeout"], ["drivers/net/wireless/intel/ipw2x00/ipw2100.c", "ipw2100_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/hostap/hostap_main.c", "prism2_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/main.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco_usb.c", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/orinoco/orinoco.h", "orinoco_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_dev.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.c", "islpci_eth_tx_timeout"], ["drivers/net/wireless/intersil/prism54/islpci_eth.h", "islpci_eth_tx_timeout"], ["drivers/net/wireless/marvell/mwifiex/main.c", "mwifiex_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.c", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/quantenna/qtnfmac/core.h", "qtnf_netdev_tx_timeout"], ["drivers/net/wireless/rndis_wlan.c", "usbnet_tx_timeout"], ["drivers/net/wireless/wl3501_cs.c", "wl3501_tx_timeout"], ["drivers/net/wireless/zydas/zd1201.c", "zd1201_tx_timeout"], ["drivers/s390/net/qeth_core.h", "qeth_tx_timeout"], ["drivers/s390/net/qeth_core_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l2_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/s390/net/qeth_l3_main.c", "qeth_tx_timeout"], ["drivers/staging/ks7010/ks_wlan_net.c", "ks_wlan_tx_timeout"], ["drivers/staging/qlge/qlge_main.c", "qlge_tx_timeout"], ["drivers/staging/rtl8192e/rtl8192e/rtl_core.c", "_rtl92e_tx_timeout"], ["drivers/staging/rtl8192u/r8192U_core.c", "tx_timeout"], ["drivers/staging/unisys/visornic/visornic_main.c", "visornic_xmit_timeout"], ["drivers/staging/wlan-ng/p80211netdev.c", "p80211knetdev_tx_timeout"], ["drivers/tty/n_gsm.c", "gsm_mux_net_tx_timeout"], ["drivers/tty/synclink.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclink_gt.c", "hdlcdev_tx_timeout"], ["drivers/tty/synclinkmp.c", "hdlcdev_tx_timeout"], ["net/atm/lec.c", "lec_tx_timeout"], ["net/bluetooth/bnep/netdev.c", "bnep_net_timeout"] ); for my $p (@work) { my @pair = @$p; my $file = $pair[0]; my $func = $pair[1]; print STDERR $file , ": ", $func,"\n"; our @ARGV = ($file); while (<ARGV>) { if (m/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/) { print STDERR "found $1+$2 in $file\n"; } if (s/($func\s*\(struct\s+net_device\s+\*[A-Za-z_]?[A-Za-z-0-9_]*)(\))/$1, unsigned int txqueue$2/) { print STDERR "$func found in $file\n"; } print; } } where the list of files and functions is simply from: git grep ndo_tx_timeout, with manual addition of headers in the rare cases where the function is from a header, then manually changing the few places which actually call ndo_tx_timeout. Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Heiner Kallweit <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Acked-by: Shannon Nelson <[email protected]> Reviewed-by: Martin Habets <[email protected]> changes from v9: fixup a forward declaration changes from v9: more leftovers from v3 change changes from v8: fix up a missing direct call to timeout rebased on net-next changes from v7: fixup leftovers from v3 change changes from v6: fix typo in rtl driver changes from v5: add missing files (allow any net device argument name) changes from v4: add a missing driver header changes from v3: change queue # to unsigned Changes from v2: added headers Changes from v1: Fix errors found by kbuild: generalize the pattern a bit, to pick up a couple of instances missed by the previous version. Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-11-16 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | 1 | -0/+4 | |
| Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-11-15 | net: reject PTP periodic output requests with unsupported flags | Jacob Keller | 1 | -0/+4 | |
| Commit 823eb2a3c4c7 ("PTP: add support for one-shot output") introduced a new flag for the PTP periodic output request ioctl. This flag is not currently supported by any driver. Fix all drivers which implement the periodic output request ioctl to explicitly reject any request with flags they do not understand. This ensures that the driver does not accidentally misinterpret the PTP_PEROUT_ONE_SHOT flag, or any new flag introduced in the future. This is important for forward compatibility: if a new flag is introduced, the driver should reject requests to enable the flag until the driver has actually been modified to support the flag in question. Cc: Felipe Balbi <[email protected]> Cc: David S. Miller <[email protected]> Cc: Christopher Hall <[email protected]> Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Richard Cochran <[email protected]> Tested-by: Aaron Brown <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-11-11 | Support LAN743x PTP periodic output on any GPIO | John Efstathiades | 2 | -96/+230 | |
| The LAN743x Ethernet controller provides two independent PTP event channels. Each one can be used to generate a periodic output from the PTP clock. The output can be routed to any one of the available GPIO pins on the device. The PTP clock API can now be used to: - select any LAN743x GPIO pin to function as a periodic output - select either LAN743x PTP event channel to generate the output The LAN7430 has 4 GPIO pins that are multiplexed with its internal PHY LED control signals. A pin assigned to the LED control function will be assigned to the GPIO function if selected for PTP periodic output. Signed-off-by: John Efstathiades <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-09-06 | lan743x: remove redundant assignment to variable rx_process_result | Colin Ian King | 1 | -2/+1 | |
| The variable rx_process_result is being initialized with a value that is never read and is being re-assigned immediately afterwards. The assignment is redundant, so replace it with the return from function lan743x_rx_process_packet. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-08-22 | ethernet: Delete unnecessary checks before the macro call “dev_kfree_skb” | Markus Elfring | 1 | -2/+1 | |
| The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-07-22 | net: Use skb accessors in network drivers | Matthew Wilcox (Oracle) | 1 | -3/+2 | |
| In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-06-19 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 | Thomas Gleixner | 1 | -4/+1 | |
| Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Enrico Weigelt <[email protected]> Reviewed-by: Kate Stewart <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> | |||||
| 2019-05-30 | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152 | Thomas Gleixner | 1 | -6/+1 | |
| Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Allison Randal <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> | |||||
| 2019-05-21 | treewide: Add SPDX license identifier - Makefile/Kconfig | Thomas Gleixner | 2 | -0/+2 | |
| Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> | |||||
| 2019-03-19 | enc28j60: Convert to use SPDX identifier | Andy Shevchenko | 1 | -5/+1 | |
| Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Fix indentation splats | Andy Shevchenko | 1 | -37/+21 | |
| Fix few indentation splats. No functional change intended. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Amend comments by fixing typos, adding periods, etc | Andy Shevchenko | 1 | -15/+16 | |
| Amend comments in the code: - adding periods to the multi-line comments - fixing typos - capitalize first word in the sentences - etc Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Remove linux/init.h | Andy Shevchenko | 1 | -1/+0 | |
| There is no need to include linux/init.h when at the same time we include linux/module.h. Remove redundant inclusion. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Convert printk() to netdev_printk() | Andy Shevchenko | 1 | -24/+27 | |
| The debug prints of network operations will look better if network device name is printed. The benefit of that is a possibility to distinguish the actual hardware when more than one is installed on the system. Convert appropriate printk(KERN_DEBUG) to netdev_print(KERN_DEBUG, ndev). Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Convert HW related printk() to dev_printk() | Andy Shevchenko | 1 | -119/+141 | |
| The debug prints of hardware status and operations will look better if SPI device name is printed. The benefit of that is a possibility to distinguish the actual hardware when more than one is installed on the system. Convert appropriate printk(KERN_DEBUG) to dev_print(KERN_DEBUG, &spi->dev). Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Switch to dev_<level> from pr_<level> | Andy Shevchenko | 1 | -12/+17 | |
| Instead of using open coded printk(KERN_<LEVEL>) switch the driver to use dev_<level> macros. Note, the device name will be printed in full, which is beneficial when more than one card installed on the system. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Use ether_addr_copy() in enc28j60_set_mac_address() | Andy Shevchenko | 1 | -1/+1 | |
| Use ether_addr_copy() instead of memcpy() to copy the mac address. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Switch to use module_spi_driver() macro | Andy Shevchenko | 1 | -19/+2 | |
| Eliminate some boilerplate code by using module_spi_driver() instead of ->init() / ->exit(), moving the salient bits from ->init() into ->probe(). Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Drop driver name duplication from messages | Andy Shevchenko | 1 | -7/+6 | |
| When dev_<level>() macros are used against SPI device, the driver's name is printed as well. No need to duplicate this explicitly. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Replace dev_*(&netdev->dev, ...) with netdev_*() | Andy Shevchenko | 1 | -24/+18 | |
| Replace open coded netdev_<level>() macros. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Remove duplicate messaging | Andy Shevchenko | 1 | -20/+0 | |
| The ->probe() and ->remove() stages can be easily debugged with initcall_debug or function tracer. There is no need to repeat the same explicitly in the driver. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-19 | enc28j60: Use device_get_mac_address() | Andy Shevchenko | 1 | -4/+3 | |
| Replace the DT-specific of_get_mac_address() function with device_get_mac_address, which works on both DT and ACPI platforms. This change makes it easier to add ACPI support. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-13 | lan743x: Fix TX Stall Issue | Bryan Whitehead | 1 | -8/+1 | |
| It has been observed that tx queue may stall while downloading from certain web sites (example www.speedtest.net) The cause has been tracked down to a corner case where the tx interrupt vector was disabled automatically, but was not re enabled later. The lan743x has two mechanisms to enable/disable individual interrupts. Interrupts can be enabled/disabled by individual source, and they can also be enabled/disabled by individual vector which has been mapped to the source. Both must be enabled for interrupts to work properly. The TX code path, primarily uses the interrupt enable/disable of the TX source bit, while leaving the vector enabled all the time. However, while investigating this issue it was noticed that the driver requested the use of the vector auto clear feature. The test above revealed a case where the vector enable was cleared unintentionally. This patch fixes the issue by deleting the lines that request the vector auto clear feature to be used. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-11 | lan743x: Fix RX Kernel Panic | Bryan Whitehead | 1 | -14/+32 | |
| It has been noticed that running the speed test at www.speedtest.net occasionally causes a kernel panic. Investigation revealed that under this test RX buffer allocation sometimes fails and returns NULL. But the lan743x driver did not handle this case. This patch fixes this issue by attempting to allocate a buffer before sending the new rx packet to the OS. If the allocation fails then the new rx packet is dropped and the existing buffer is reused in the DMA ring. Updates for v2: Additional 2 locations where allocation was not checked, has been changed to reuse existing buffer. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-03-02 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net | David S. Miller | 2 | -5/+13 | |
| 2019-03-01 | lan743x: Fix TX Stall Issue | Bryan Whitehead | 1 | -4/+12 | |
| It has been observed that tx queue stalls while downloading from certain web sites (example www.speedtest.net) The cause has been tracked down to a corner case where dma descriptors where not setup properly. And there for a tx completion interrupt was not signaled. This fix corrects the problem by properly marking the end of a multi descriptor transmission. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-02-27 | enc28j60: Correct description of debug module parameter | Andy Shevchenko | 1 | -1/+1 | |
| The netif_msg_init() API takes on input the amount of bits to be set. The description of debug parameter in the enc28j60 module is misleading in this sense and passing 0xffff does not give an expected behaviour. Fix the description of debug module parameter to show what exactly is expected. Signed-off-by: Andy Shevchenko <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-01-26 | lan743x: Provide Read/Write Access to on chip OTP | Bryan Whitehead | 2 | -52/+182 | |
| The LAN743x includes on chip One-Time-Programmable (OTP) memory. This patch extends the ethtool EEPROM read/write interface to access OTP memory space. The currently existing interface is limited, as it does not allow OTP read, and OTP writes are restricted to offset==0, length==512, and data[0]==0xF3. This patch removes these restrictions and adds a private flag called OTP_ACCESS, which is used to switch between EEPROM, and OTP modes. The private flag OTP_ACCESS is configurable through the ethtool --set-priv-flags command. And visible through the ethtool --show-priv-flags command. By default OTP_ACCESS is false, and there for previously existing EEPROM commands will work exactly the same. However now access to OTP requires one extra step of setting OTP_ACCESS to true. This flag controls the read, write, and length reporting, functions of ethtool. EEPROM presence is not checked when setting or clearing this flag. If the EEPROM is not present, the user, as before, will need to diagnose that using existing read and write function of ethtool, while OTP_ACCESS is false. Updates for V2: Added comments as to why this patch is needed. Added comments explaining that EEPROM presence is not check when setting or clearing the OTP_ACCESS flag. Added length checking to all otp/eeprom read/write functions. Signed-off-by: Bryan Whitehead <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2019-01-08 | lan743x: Remove phy_read from link status change function | Bryan Whitehead | 1 | -7/+4 | |
| It has been noticed that some phys do not have the registers required by the previous implementation. To fix this, instead of using phy_read, the required information is extracted from the phy_device structure. fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2018-12-19 | lan743x: Remove MAC Reset from initialization | Bryan Whitehead | 1 | -6/+0 | |
| The MAC Reset was noticed to erase important EEPROM settings. It is also unnecessary since a chip wide reset was done earlier in initialization, and that reset preserves EEPROM settings. There for this patch removes the unnecessary MAC specific reset. Signed-off-by: Bryan Whitehead <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2018-12-18 | lan743x: Expand phy search for LAN7431 | Bryan Whitehead | 1 | -2/+3 | |
| The LAN7431 uses an external phy, and it can be found anywhere in the phy address space. This patch uses phy address 1 for LAN7430 only. And searches all addresses otherwise. Signed-off-by: Bryan Whitehead <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||
| 2018-11-27 | lan743x: Enable driver to work with LAN7431 | Bryan Whitehead | 2 | -0/+2 | |
| This driver was designed to work with both LAN7430 and LAN7431. The only difference between the two is the LAN7431 has support for external phy. This change adds LAN7431 to the list of recognized devices supported by this driver. Updates for v2: changed 'fixes' tag to match defined format fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <[email protected]> Signed-off-by: David S. Miller <[email protected]> | |||||