aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell
AgeCommit message (Collapse)AuthorFilesLines
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller10-35/+56
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-04net: mvneta: fix double free of txq->bufTom Rix1-11/+2
clang static analysis reports this problem: drivers/net/ethernet/marvell/mvneta.c:3465:2: warning: Attempt to free released memory kfree(txq->buf); ^~~~~~~~~~~~~~~ When mvneta_txq_sw_init() fails to alloc txq->tso_hdrs, it frees without poisoning txq->buf. The error is caught in the mvneta_setup_txqs() caller which handles the error by cleaning up all of the txqs with a call to mvneta_txq_sw_deinit which also frees txq->buf. Since mvneta_txq_sw_deinit is a general cleaner, all of the partial cleaning in mvneta_txq_sw_deinit()'s error handling is not needed. Fixes: 2adb719d74f6 ("net: mvneta: Implement software TSO") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-30octeontx2-pf: Fix synchnorization issue in mboxHariprasad Kelam4-9/+19
Mbox implementation in octeontx2 driver has three states alloc, send and reset in mbox response. VF allocate and sends message to PF for processing, PF ACKs them back and reset the mbox memory. In some case we see synchronization issue where after msgs_acked is incremented and before mbox_reset API is called, if current execution is scheduled out and a different thread is scheduled in which checks for msgs_acked. Since the new thread sees msgs_acked == msgs_sent it will try to allocate a new message and to send a new mbox message to PF.Now if mbox_reset is scheduled in, PF will see '0' in msgs_send. This patch fixes the issue by calling mbox_reset before incrementing msgs_acked flag for last processing message and checks for valid message size. Fixes: d424b6c02 ("octeontx2-pf: Enable SRIOV and added VF mbox handling") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-30octeontx2-pf: Fix the device state on errorHariprasad Kelam1-1/+4
Currently in otx2_open on failure of nix_lf_start transmit queues are not stopped which are already started in link_event. Since the tx queues are not stopped network stack still try's to send the packets leading to driver crash while access the device resources. Fixes: 50fe6c02e ("octeontx2-pf: Register and handle link notifications") Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-30octeontx2-pf: Fix TCP/UDP checksum offload for IPv6 framesGeetha sowjanya1-0/+1
For TCP/UDP checksum offload feature in Octeontx2 expects L3TYPE to be set irrespective of IP header checksum is being offloaded or not. Currently for IPv6 frames L3TYPE is not being set resulting in packet drop with checksum error. This patch fixes this issue. Fixes: 3ca6c4c88 ("octeontx2-pf: Add packet transmission support") Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-30octeontx2-af: Fix enable/disable of default NPC entriesSubbaraya Sundeep3-11/+23
Packet replication feature present in Octeontx2 is a hardware linked list of PF and its VF interfaces so that broadcast packets are sent to all interfaces present in the list. It is driver job to add and delete a PF/VF interface to/from the list when the interface is brought up and down. This patch fixes the npc_enadis_default_entries function to handle broadcast replication properly if packet replication feature is present. Fixes: 40df309e4166 ("octeontx2-af: Support to enable/disable default MCAM entries") Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Geetha sowjanya <gakula@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29net: mvneta: avoid possible cache misses in mvneta_rx_swbmLorenzo Bianconi1-6/+6
Do not use rx_desc pointers if possible since rx descriptors are stored in uncached memory and dereferencing rx_desc pointers generate extra loads. This patch improves XDP_DROP performance of ~ 110Kpps (700Kpps vs 590Kpps) on Marvell Espressobin Analyzed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: add parser support for NAT-T-ESPKiran Kumar K2-29/+65
Add support for NAT-T-ESP to KPU parser configuration. NAT ESP is a UDP based protocol. So move ESP to LE so that both UDP and ESP can be extracted. Signed-off-by: Kiran Kumar K <kirankumark@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: optimize parsing of IPv6 fragmentsAbhijit Ayarekar1-40/+40
IPv6 fragmented packet may not contain completed layer 4 information. So stop KPU parsing after setting ipv6 fragmentation flag. Signed-off-by: Abhijit Ayarekar <aayarekar@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: Add IPv6 fields to default MKEXVidhya Vidhyaraman1-0/+5
Added some IPv6 protocol fields to the default MKEX profile. They include everything from the beginning of IP header and up to source address. The pattern occupies full KW2 in MCAM entry. Only one out of two LD registers for this protocol is used. Signed-off-by: Vidhya Vidhyaraman <vraman@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: fix Extended DSA and eDSA parsingSatha Rao1-3/+3
KPU profile interpret Extended DSA and eDSA by looking source dev. This was incorrect and it restricts to use few source device ids and also created confusion while parsing regular DSA tag. With below patch lookup was based on bit 12 of Word0. This is always zero for DSA tag and it should be one for Extended DSA and eDSA. Signed-off-by: Satha Rao <skoteshwar@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: add parser support for Forward DSAHariprasad Kelam2-0/+145
Marvell Prestera switches supports distributed switch architecture by inserting Forward DSA tag of 4 bytes right after ethernet SMAC. This tag don't have a tpid field. This patch provides parser and extraction support for the same. Default ldata extraction profile added for FDSA such that Src_port is extracted and placed inplace of vlanid field. Like extended DSA and eDSA tags,a special PKIND of 62 is used for this tag. Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: cleanup KPU config dataStanislaw Kardach5-144/+301
Refactor KPU related NPC code gathering all configuration data in a structured format and putting it in one place (npc_profile.h). This increases readability and makes it easier to extend the profile configuration (as opposed to jumping between multiple header and source files). To do this: * Gather all KPU profile related data into a single adapter struct. * Convert the built-in MKEX definition to a structured one to streamline the MKEX loading. * Convert LT default register configuration into a structure, keeping default protocol settings in same file where identifiers for those protocols are defined. * Add a single point for KPU profile loading, so that its source may change in the future once proper interfaces for loading such config are in place. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-29octeontx2-af: fix LD CUSTOM LTYPE aliasingStanislaw Kardach1-2/+2
Since LD contains LTYPE definitions tweaked toward efficient NIX_AF_RX_FLOW_KEY_ALG(0..31)_FIELD(0..4) usage, the original location of NPC_LT_LD_CUSTOM0/1 was aliased with MPLS_IN_* definitions. Moving custom frame to value 6 and 7 removes the aliasing at the cost of custom frames being also considered when TCP/UDP RSS algo is configured. However since the goal of CUSTOM frames is to classify them to a separate set of RQs, this cost is acceptable. Signed-off-by: Stanislaw Kardach <skardach@marvell.com> Acked-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28net: mvneta: try to use in-irq pp cache in mvneta_txq_bufs_freeLorenzo Bianconi1-4/+7
Try to recycle the xdp tx buffer into the in-irq page_pool cache if mvneta_txq_bufs_free is executed in the NAPI context for XDP_TX use case Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27net: marvell: mvpp2: Fix W=1 warning with !CONFIG_ACPIAndrew Lunn1-0/+2
rivers/net/ethernet/marvell/mvpp2/mvpp2_main.c:7084:36: warning: ‘mvpp2_acpi_match’ defined but not used [-Wunused-const-variable=] 7084 | static const struct acpi_device_id mvpp2_acpi_match[] = { | ^~~~~~~~~~~~~~~~ Wrap the definition inside #ifdef/#endif. Compile tested only. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23octeontx2-pf: Support to change VLAN based RSS hash options via ethtoolGeorge Cherian2-1/+8
Add support to control rx-flow-hash based on VLAN. By default VLAN plus 4-tuple based hashing is enabled. Changes can be done runtime using ethtool To enable 2-tuple plus VLAN based flow distribution # ethtool -N <intf> rx-flow-hash <prot> sdv To enable 4-tuple plus VLAN based flow distribution # ethtool -N <intf> rx-flow-hash <prot> sdfnv Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23octeontx2-af: Add support for VLAN based RSS hashingGeorge Cherian2-0/+9
Added support for PF/VF drivers to choose RSS flow key algorithm with VLAN tag included in hashing input data. Only CTAG is considered. Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23octeontx2-pf: Add tracepoints for PF/VF mailboxSubbaraya Sundeep3-0/+10
With tracepoints support present in the mailbox code this patch adds tracepoints in PF and VF drivers at places where mailbox messages are allocated, sent and at message interrupts. Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23octeontx2-af: Introduce tracepoints for mailboxSubbaraya Sundeep6-2/+136
Added tracepoints in mailbox code so that the mailbox operations like message allocation, sending message and message interrupts are traced. Also the mailbox errors occurred like timeout or wrong responses are traced. These will help in debugging mailbox issues. Here's an example output showing one of the mailbox messages sent by PF to AF and AF responding to it: ~# mount -t tracefs none /sys/kernel/tracing/ ~# echo 1 > /sys/kernel/tracing/events/rvu/enable ~# ifconfig eth0 up ~# cat /sys/kernel/tracing/trace ~# cat /sys/kernel/tracing/trace tracer: nop _-----=> irqs-off / _----=> need-resched | / _---=> hardirq/softirq || / _--=> preempt-depth ||| / delay TASK-PID CPU# |||| TIMESTAMP FUNCTION | | | |||| | | ifconfig-2382 [002] .... 756.161892: otx2_msg_alloc: [0002:02:00.0] msg:(0x400) size:40 ifconfig-2382 [002] ...1 756.161895: otx2_msg_send: [0002:02:00.0] sent 1 msg(s) of size:48 <idle>-0 [000] d.h1 756.161902: otx2_msg_interrupt: [0002:01:00.0] mbox interrupt PF(s) to AF (0x2) kworker/u49:0-1165 [000] .... 756.162049: otx2_msg_process: [0002:01:00.0] msg:(0x400) error:0 kworker/u49:0-1165 [000] ...1 756.162051: otx2_msg_send: [0002:01:00.0] sent 1 msg(s) of size:32 kworker/u49:0-1165 [000] d.h. 756.162056: otx2_msg_interrupt: [0002:02:00.0] mbox interrupt AF to PF (0x1) Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-3/+7
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: mventa: remove unused variable 'dummy' in mvneta_mib_counters_clear()Zhang Changzhong1-4/+3
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/marvell/mvneta.c:754:6: warning: variable 'dummy' set but not used [-Wunused-but-set-variable] 754 | u32 dummy; | ^~~~~ This variable is not used in function mvneta_mib_counters_clear(), so remove it to avoid build warning. Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: mvneta: avoid copying shared_info frags in mvneta_swbm_build_skbLorenzo Bianconi1-7/+4
Avoid copying skb_shared_info frags array in mvneta_swbm_build_skb() since __build_skb_around() does not overwrite it Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-20net: mvneta: recycle the page in case of out-of-orderLorenzo Bianconi1-1/+5
Recycle the received page into the page_pool cache if the dma descriptors arrived in a wrong order Fixes: ca0e014609f05 ("net: mvneta: move skb build after descriptors processing") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add Switchdev driver implementationVadym Kochan7-4/+1807
The following features are supported: - VLAN-aware bridge offloading - VLAN-unaware bridge offloading - FDB offloading (learning, ageing) - Switchport configuration Currently there are some limitations like: - Only 1 VLAN-aware bridge instance supported - FDB ageing timeout parameter is set globally per device Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add ethtool interface supportVadym Kochan7-6/+1182
The ethtool API provides support for the configuration of the following features: speed and duplex, auto-negotiation, MDI-x, forward error correction, port media type. The API also provides information about the port status, hardware and software statistic. The following limitation exists: - port media type should be configured before speed setting - ethtool -m option is not supported - ethtool -p option is not supported - ethtool -r option is supported for RJ45 port only - the following combination of parameters is not supported: ethtool -s sw1pX port XX autoneg on - forward error correction feature is supported only on SFP ports, 10G speed - auto-negotiation and MDI-x features are not supported on Copper-to-Fiber SFP module Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add basic devlink supportVadym Kochan6-5/+165
Add very basic support for devlink interface: - driver name - fw version - devlink ports Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add PCI interface supportVadym Kochan3-0/+782
Add PCI interface driver for Prestera Switch ASICs family devices, which provides: - Firmware loading mechanism - Requests & events handling to/from the firmware - Access to the firmware on the bus level The firmware has to be loaded each time the device is reset. The driver is loading it from: /lib/firmware/mrvl/prestera/mvsw_prestera_fw-v{MAJOR}.{MINOR}.img The full firmware image version is located within the internal header and consists of 3 numbers - MAJOR.MINOR.PATCH. Additionally, driver has hard-coded minimum supported firmware version which it can work with: MAJOR - reflects the support on ABI level between driver and loaded firmware, this number should be the same for driver and loaded firmware. MINOR - this is the minimum supported version between driver and the firmware. PATCH - indicates only fixes, firmware ABI is not changed. Firmware image file name contains only MAJOR and MINOR numbers to make driver be compatible with any PATCH version. Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-17net: marvell: prestera: Add driver for Prestera family ASIC devicesVadym Kochan12-0/+2380
Marvell Prestera 98DX326x integrates up to 24 ports of 1GbE with 8 ports of 10GbE uplinks or 2 ports of 40Gbps stacking for a largely wireless SMB deployment. The current implementation supports only boards designed for the Marvell Switchdev solution and requires special firmware. The core Prestera switching logic is implemented in prestera_main.c, there is an intermediate hw layer between core logic and firmware. It is implemented in prestera_hw.c, the purpose of it is to encapsulate hw related logic, in future there is a plan to support more devices with different HW related configurations. This patch contains only basic switch initialization and RX/TX support over SDMA mechanism. Currently supported devices have DMA access range <= 32bit and require ZONE_DMA to be enabled, for such cases SDMA driver checks if the skb allocated in proper range supported by the Prestera device. Also meanwhile there is no TX interrupt support in current firmware version so recycling work is scheduled on each xmit. Port's mac address is generated from the switch base mac which may be provided via device-tree (static one or as nvme cell), or randomly generated. This is required by the firmware. Co-developed-by: Andrii Savka <andrii.savka@plvision.eu> Signed-off-by: Andrii Savka <andrii.savka@plvision.eu> Co-developed-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu> Co-developed-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by: Serhiy Boiko <serhiy.boiko@plvision.eu> Co-developed-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Signed-off-by: Serhiy Pshyk <serhiy.pshyk@plvision.eu> Co-developed-by: Taras Chornyi <taras.chornyi@plvision.eu> Signed-off-by: Taras Chornyi <taras.chornyi@plvision.eu> Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu> Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: pxa168_eth: remove unused variable 'retval' int pxa168_eth_change_mtu()Zhang Changzhong1-2/+1
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/marvell/pxa168_eth.c:1190:6: warning: variable 'retval' set but not used [-Wunused-but-set-variable] 1190 | int retval; | ^~~~~~ Function pxa168_eth_change_mtu() always return zero, so variable 'retval' is redundant, just remove it. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: skge: convert tasklets to use new tasklet_setup() APIAllen Pais1-3/+3
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-13net: mvpp2: set SKBTX_IN_PROGRESSRussell King1-0/+2
Richard Cochran points out that SKBTX_IN_PROGRESS should be set when the skbuff is queued for timestamping. Add this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11octeontx2-af: Constify npc_kpu_profile_{action,cam}Rikard Falkeborn3-39/+39
These are never modified, so constify them to allow the compiler to place them in read-only memory. This moves about 25kB to read-only memory as seen by the output of the size command. Before: text data bss dec hex filename 296203 65464 1248 362915 589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko After: text data bss dec hex filename 321003 40664 1248 362915 589a3 drivers/net/ethernet/marvell/octeontx2/af/octeontx2_af.ko Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvpp2: ptp: Fix unused variablesAlex Dewar1-4/+2
In the functions mvpp2_isr_handle_xlg() and mvpp2_isr_handle_gmac_internal(), the bool variable link is assigned a true value in the case that a given bit of val is set. However, if the bit is unset, no value is assigned to link and it is then passed to mvpp2_isr_handle_link() without being initialised. Fix by assigning to link the value of the bit test. Build-tested on x86. Fixes: 36cfd3a6e52b ("net: mvpp2: restructure "link status" interrupt handling") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvneta: fix possible use-after-free in mvneta_xdp_put_buffLorenzo Bianconi1-2/+2
Release first buffer as last one since it contains references to subsequent fragments. This code will be optimized introducing multi-buffer bit in xdp_buff structure. Fixes: ca0e014609f05 ("net: mvneta: move skb build after descriptors processing") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mventa: drop mvneta_stats from mvneta_swbm_rx_frame signatureLorenzo Bianconi1-3/+2
Remove mvneta_stats from mvneta_swbm_rx_frame signature since now stats are accounted in mvneta_run_xdp routine Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvneta: rely on MVNETA_MAX_RX_BUF_SIZE for pkt split in ↵Lorenzo Bianconi1-2/+1
mvneta_swbm_rx_frame() In order to easily change the rx buffer size, rely on MVNETA_MAX_RX_BUF_SIZE instead of PAGE_SIZE in mvneta_swbm_rx_frame routine for rx buffer split. Currently this is not an issue since we set MVNETA_MAX_RX_BUF_SIZE to PAGE_SIZE - MVNETA_SKB_PAD but it is a good to have to configure a different rx buffer size. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: mvpp2: ptp: add support for transmit timestampingRussell King2-11/+244
Add support for timestamping transmit packets. We allocate SYNC messages to queue 1, every other message to queue 0. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: mvpp2: ptp: add support for receive timestampingRussell King3-2/+194
Add support for receive timestamping. When enabled, the hardware adds a timestamp into the receive queue descriptor for all received packets with no filtering. Hence, we can only support NONE or ALL receive filter modes. The timestamp in the receive queue contains two bit sof seconds and the full nanosecond timestamp. This has to be merged with the remainder of the seconds from the TAI clock to arrive at a full timestamp before we can convert it to a ktime for the skb hardware timestamp field. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: mvpp2: ptp: add TAI supportRussell King5-1/+521
Add support for the TAI block in the mvpp2.2 hardware. Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: mvpp2: check first level interrupt status registersRussell King2-2/+15
Check the first level interrupt status registers to determine how to further process the port interrupt. We will need this to know whether to invoke the link status processing and/or the PTP processing for both XLG and GMAC. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: mvpp2: rename mis-named "link status" interruptRussell King2-18/+19
The link interrupt is used for way more than just the link status; it comes from a collection of units to do with the port. The Marvell documentation describes the interrupt as "GOP port X interrupt". Since we are adding PTP support, and the PTP interrupt uses this, rename it to be more inline with the documentation. This interrupt is also mis-named in the DT binding, but we leave that alone. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: mvpp2: restructure "link status" interrupt handlingRussell King1-32/+51
The "link status" interrupt is used for more than just link status. Restructure mvpp2_link_status_isr() so we can add additional handling. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-09net: pxa168_eth: remove redundant null check before clk_disable_unprepare()Zhang Changzhong1-3/+1
Because clk_prepare_enable() and clk_disable_unprepare() already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-9/+9
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-03net: mvpp2: split xlg and gmac pcsRussell King1-55/+55
Split the XLG and GMAC PCS implementations and switch between them during the mac_prepare() method. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: convert to phylink pcs operationsRussell King2-116/+177
Convert mvpp2 to phylink's new pcs support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: move GMAC reset handling into mac_prepare()/mac_finish()Russell King1-32/+21
Move the GMAC reset handling into mac_prepare() / mac_finish() Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: ensure the port is forced down while changing modesRussell King1-11/+36
Ensure that the port is forced down while reconfiguring, controlling this via mac_prepare() and mac_finish() so that it is down while we are configuring our (future) PCS. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-03net: mvpp2: convert to use mac_prepare()/mac_finish()Russell King1-11/+37
Convert mvpp2 to use the mac_prepare() and mac_finish() methods in preparation to converting mvpp2 to split-PCS support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.