aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
AgeCommit message (Collapse)AuthorFilesLines
2018-06-11ixgbe: Fix bit definitions and add support for testing for ipsec supportAlexander Duyck1-1/+13
This patch addresses two issues. First it adds the correct bit definitions for the SECTXSTAT and SECRXSTAT registers. Then it makes use of those definitions to test for if IPsec has been disabled on the part and if so we do not enable it. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reported-by: Andre Tomt <andre@tomt.net> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-11ixgbe: Avoid loopback and fix boolean logic in ipsec_stop_dataAlexander Duyck1-2/+11
This patch fixes two issues. First we add an early test for the Tx and Rx security block ready bits. By doing this we can avoid the need for waits or loopback in the event that the security block is already flushed out. Secondly we fix the boolean logic that was testing for the Tx OR Rx ready bits being set and change it so that we only exit if the Tx AND Rx ready bits are both set. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-11ixgbe: Move ipsec init function to before reset callAlexander Duyck1-7/+0
This patch moves the IPsec init function in ixgbe_sw_init. This way it is a bit more consistent with the placement of similar initialization functions and is placed before the reset_hw call which should allow us to clean up any link issues that may be introduced by the fact that we force the link up if somehow the device had IPsec still enabled before the driver was loaded. In addition to the function move it is necessary to change the assignment of netdev->features. The easiest way to do this is to just test for the existence of adapter->ipsec and if it is present we set the feature bits. Fixes: 49a94d74d948 ("ixgbe: add ipsec engine start and stop routines") Reported-by: Andre Tomt <andre@tomt.net> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbe: fix broken ipsec Rx with proper cast on spiShannon Nelson1-1/+1
Fix up a cast problem introduced by a sparse cleanup patch. This fixes a problem where the encrypted packets were not recognized on Rx and subsequently dropped. Fixes: 9cfbfa701b55 ("ixgbe: cleanup sparse warnings") Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbe: check ipsec ip addr against mgmt filtersShannon Nelson1-0/+88
Make sure we don't try to offload the decryption of an incoming packet that should get delivered to the management engine. This is a corner case that will likely be very seldom seen, but could really confuse someone if they were to hit it. Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-17ixgbe: cleanup sparse warningsCathy Zhou1-9/+16
Sparse complains valid conversions between restricted types, force attribute is used to avoid those warnings. Signed-off-by: Cathy Zhou <cathy.zhou@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11ixgbe: fix memory leak on ipsec allocationColin Ian King1-1/+1
The error clean up path kfree's adapter->ipsec and should be instead kfree'ing ipsec. Fix this. Also, the err1 error exit path does not need to kfree ipsec because this failure path was for the failed allocation of ipsec. Detected by CoverityScan, CID#146424 ("Resource Leak") Fixes: 63a67fe229ea ("ixgbe: add ipsec offload add and remove SA") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-26/+2
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23ixgbe: enable TSO with IPsec offloadShannon Nelson1-2/+7
Fix things up to support TSO offload in conjunction with IPsec hw offload. This raises throughput with IPsec offload on to nearly line rate. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbe: no need for esp trailer if GSOShannon Nelson1-16/+21
There is no need to calculate the trailer length if we're doing a GSO/TSO, as there is no trailer added to the packet data. Also, don't bother clearing the flags field as it was already cleared earlier. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbe: remove unneeded ipsec state free callbackShannon Nelson1-13/+0
With commit 7f05b467a735 ("xfrm: check for xdo_dev_state_free") we no longer need to add an empty callback function to the driver, so now let's remove the useless code. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbe: fix ipsec trailer lengthShannon Nelson1-1/+23
Fix up the Tx trailer length calculation. We can't believe the trailer len from the xstate information because it was calculated before the packet was put together and padding added. This bit of code finds the padding value in the trailer, adds it to the authentication length, and saves it so later we can put it into the Tx descriptor to tell the device where to stop the checksum calculation. Fixes: 592594704761 ("ixgbe: process the Tx ipsec offload") Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12ixgbe: check for 128-bit authenticationShannon Nelson1-5/+11
Make sure the Security Association is using a 128-bit authentication, since that's the only size that the hardware offload supports. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: register ipsec offload with the xfrm subsystemShannon Nelson1-0/+17
With all the support code in place we can now link in the ipsec offload operations and set the ESP feature flag for the XFRM subsystem to see. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: ipsec offload statsShannon Nelson1-0/+2
Add a simple statistic to count the ipsec offloads. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: process the Tx ipsec offloadShannon Nelson1-0/+79
If the skb has a security association referenced in the skb, then set up the Tx descriptor with the ipsec offload bits. While we're here, we fix an oddly named field in the context descriptor struct. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: process the Rx ipsec offloadShannon Nelson1-2/+106
If the chip sees and decrypts an ipsec offload, set up the skb sp pointer with the ralated SA info. Since the chip is rude enough to keep to itself the table index it used for the decryption, we have to do our own table lookup, using the hash for speed. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: restore offloaded SAs after a resetShannon Nelson1-0/+41
On a chip reset most of the table contents are lost, so must be restored. This scans the driver's ipsec tables and restores both the filled and empty table slots to their pre-reset values. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec offload add and remove SAShannon Nelson1-1/+396
Add the functions for setting up and removing offloaded SAs (Security Associations) with the x540 hardware. We set up the callback structure but we don't yet set the hardware feature bit to be sure the XFRM service won't actually try to use us for an offload yet. The software tables are made up to mimic the hardware tables to make it easier to track what's in the hardware, and the SA table index is used for the XFRM offload handle. However, there is a hashing field in the Rx SA tracking that will be used to facilitate faster table searches in the Rx fast path. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec engine start and stop routinesShannon Nelson1-0/+142
Add in the code for running and stopping the hardware ipsec encryption/decryption engine. It is good to keep the engine off when not in use in order to save on the power draw. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23ixgbe: add ipsec register access routinesShannon Nelson1-0/+161
Add a few routines to make access to the ipsec registers just a little easier, and throw in the beginnings of an initialization. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.