aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc
AgeCommit message (Collapse)AuthorFilesLines
2023-06-22igc: Fix race condition in PTP tx codeVinicius Costa Gomes3-30/+41
Currently, the igc driver supports timestamping only one tx packet at a time. During the transmission flow, the skb that requires hardware timestamping is saved in adapter->ptp_tx_skb. Once hardware has the timestamp, an interrupt is delivered, and adapter->ptp_tx_work is scheduled. In igc_ptp_tx_work(), we read the timestamp register, update adapter->ptp_tx_skb, and notify the network stack. While the thread executing the transmission flow (the user process running in kernel mode) and the thread executing ptp_tx_work don't access adapter->ptp_tx_skb concurrently, there are two other places where adapter->ptp_tx_skb is accessed: igc_ptp_tx_hang() and igc_ptp_suspend(). igc_ptp_tx_hang() is executed by the adapter->watchdog_task worker thread which runs periodically so it is possible we have two threads accessing ptp_tx_skb at the same time. Consider the following scenario: right after __IGC_PTP_TX_IN_PROGRESS is set in igc_xmit_frame_ring(), igc_ptp_tx_hang() is executed. Since adapter->ptp_tx_start hasn't been written yet, this is considered a timeout and adapter->ptp_tx_skb is cleaned up. This patch fixes the issue described above by adding the ptp_tx_lock to protect access to ptp_tx_skb and ptp_tx_start fields from igc_adapter. Since igc_xmit_frame_ring() called in atomic context by the networking stack, ptp_tx_lock is defined as a spinlock, and the irq safe variants of lock/unlock are used. With the introduction of the ptp_tx_lock, the __IGC_PTP_TX_IN_PROGRESS flag doesn't provide much of a use anymore so this patch gets rid of it. Fixes: 2c344ae24501 ("igc: Add support for TX timestamping") Signed-off-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+11
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12igc: Fix possible system crash when loading moduleVinicius Costa Gomes1-0/+3
Guarantee that when probe() is run again, PTM and PCI busmaster will be in the same state as it was if the driver was never loaded. Avoid an i225/i226 hardware issue that PTM requests can be made even though PCI bus mastering is not enabled. These unexpected PTM requests can crash some systems. So, "force" disable PTM and busmastering before removing the driver, so they can be re-enabled in the right order during probe(). This is more like a workaround and should be applicable for i225 and i226, in any platform. Fixes: 1b5d73fb8624 ("igc: Enable PCIe PTM") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-12igc: Clean the TX buffer and TX descriptor ringMuhammad Husaini Zulkifli1-1/+8
There could be a race condition during link down where interrupt being generated and igc_clean_tx_irq() been called to perform the TX completion. Properly clear the TX buffer/descriptor ring and disable the TX Queue ring in igc_free_tx_resources() to avoid that. Kernel trace: [ 108.237177] Hardware name: Intel Corporation Tiger Lake Client Platform/TigerLake U DDR4 SODIMM RVP, BIOS TGLIFUI1.R00.4204.A00.2105270302 05/27/2021 [ 108.237178] RIP: 0010:refcount_warn_saturate+0x55/0x110 [ 108.242143] RSP: 0018:ffff9e7980003db0 EFLAGS: 00010286 [ 108.245555] Code: 84 bc 00 00 00 c3 cc cc cc cc 85 f6 74 46 80 3d 20 8c 4d 01 00 75 ee 48 c7 c7 88 f4 03 ab c6 05 10 8c 4d 01 01 e8 0b 10 96 ff <0f> 0b c3 cc cc cc cc 80 3d fc 8b 4d 01 00 75 cb 48 c7 c7 b0 f4 03 [ 108.250434] [ 108.250434] RSP: 0018:ffff9e798125f910 EFLAGS: 00010286 [ 108.254358] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 108.259325] [ 108.259325] RAX: 0000000000000000 RBX: ffff8ddb935b8000 RCX: 0000000000000027 [ 108.261868] RDX: ffff8de250a28800 RSI: ffff8de250a1c580 RDI: ffff8de250a1c580 [ 108.265538] RDX: 0000000000000027 RSI: 0000000000000002 RDI: ffff8de250a9c588 [ 108.265539] RBP: ffff8ddb935b8000 R08: ffffffffab2655a0 R09: ffff9e798125f898 [ 108.267914] RBP: ffff8ddb8a5b8d80 R08: 0000005648eba354 R09: 0000000000000000 [ 108.270196] R10: 0000000000000001 R11: 000000002d2d2d2d R12: ffff9e798125f948 [ 108.270197] R13: ffff9e798125fa1c R14: ffff8ddb8a5b8d80 R15: 7fffffffffffffff [ 108.273001] R10: 000000002d2d2d2d R11: 000000002d2d2d2d R12: ffff8ddb8a5b8ed4 [ 108.276410] FS: 00007f605851b740(0000) GS:ffff8de250a80000(0000) knlGS:0000000000000000 [ 108.280597] R13: 00000000000002ac R14: 00000000ffffff99 R15: ffff8ddb92561b80 [ 108.282966] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 108.282967] CR2: 00007f053c039248 CR3: 0000000185850003 CR4: 0000000000f70ee0 [ 108.286206] FS: 0000000000000000(0000) GS:ffff8de250a00000(0000) knlGS:0000000000000000 [ 108.289701] PKRU: 55555554 [ 108.289702] Call Trace: [ 108.289704] <TASK> [ 108.293977] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 108.297562] sock_alloc_send_pskb+0x20c/0x240 [ 108.301494] CR2: 00007f053c03a168 CR3: 0000000184394002 CR4: 0000000000f70ef0 [ 108.301495] PKRU: 55555554 [ 108.306464] __ip_append_data.isra.0+0x96f/0x1040 [ 108.309441] Call Trace: [ 108.309443] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.314927] <IRQ> [ 108.314928] sock_wfree+0x1c7/0x1d0 [ 108.318078] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.320276] skb_release_head_state+0x32/0x90 [ 108.324812] ip_make_skb+0xf6/0x130 [ 108.327188] skb_release_all+0x16/0x40 [ 108.330775] ? udp_sendmsg+0x9f3/0xcb0 [ 108.332626] napi_consume_skb+0x48/0xf0 [ 108.334134] ? xfrm_lookup_route+0x23/0xb0 [ 108.344285] igc_poll+0x787/0x1620 [igc] [ 108.346659] udp_sendmsg+0x9f3/0xcb0 [ 108.360010] ? ttwu_do_activate+0x40/0x220 [ 108.365237] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 108.366744] ? try_to_wake_up+0x289/0x5e0 [ 108.376987] ? sock_sendmsg+0x81/0x90 [ 108.395698] ? __pfx_process_timeout+0x10/0x10 [ 108.395701] sock_sendmsg+0x81/0x90 [ 108.409052] __napi_poll+0x29/0x1c0 [ 108.414279] ____sys_sendmsg+0x284/0x310 [ 108.419507] net_rx_action+0x257/0x2d0 [ 108.438216] ___sys_sendmsg+0x7c/0xc0 [ 108.439723] __do_softirq+0xc1/0x2a8 [ 108.444950] ? finish_task_switch+0xb4/0x2f0 [ 108.452077] irq_exit_rcu+0xa9/0xd0 [ 108.453584] ? __schedule+0x372/0xd00 [ 108.460713] common_interrupt+0x84/0xa0 [ 108.467840] ? clockevents_program_event+0x95/0x100 [ 108.474968] </IRQ> [ 108.482096] ? do_nanosleep+0x88/0x130 [ 108.489224] <TASK> [ 108.489225] asm_common_interrupt+0x26/0x40 [ 108.496353] ? __rseq_handle_notify_resume+0xa9/0x4f0 [ 108.503478] RIP: 0010:cpu_idle_poll+0x2c/0x100 [ 108.510607] __sys_sendmsg+0x5d/0xb0 [ 108.518687] Code: 05 e1 d9 c8 00 65 8b 15 de 64 85 55 85 c0 7f 57 e8 b9 ef ff ff fb 65 48 8b 1c 25 00 cc 02 00 48 8b 03 a8 08 74 0b eb 1c f3 90 <48> 8b 03 a8 08 75 13 8b 05 77 63 cd 00 85 c0 75 ed e8 ce ec ff ff [ 108.525817] do_syscall_64+0x44/0xa0 [ 108.531563] RSP: 0018:ffffffffab203e70 EFLAGS: 00000202 [ 108.538693] entry_SYSCALL_64_after_hwframe+0x72/0xdc [ 108.546775] [ 108.546777] RIP: 0033:0x7f605862b7f7 [ 108.549495] RAX: 0000000000000001 RBX: ffffffffab20c940 RCX: 000000000000003b [ 108.551955] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 108.554068] RDX: 4000000000000000 RSI: 000000002da97f6a RDI: 00000000002b8ff4 [ 108.559816] RSP: 002b:00007ffc99264058 EFLAGS: 00000246 [ 108.564178] RBP: 0000000000000000 R08: 00000000002b8ff4 R09: ffff8ddb01554c80 [ 108.571302] ORIG_RAX: 000000000000002e [ 108.571303] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f605862b7f7 [ 108.574023] R10: 000000000000015b R11: 000000000000000f R12: ffffffffab20c940 [ 108.574024] R13: 0000000000000000 R14: ffff8de26fbeef40 R15: ffffffffab20c940 [ 108.578727] RDX: 0000000000000000 RSI: 00007ffc992640a0 RDI: 0000000000000003 [ 108.578728] RBP: 00007ffc99264110 R08: 0000000000000000 R09: 175f48ad1c3a9c00 [ 108.581187] do_idle+0x62/0x230 [ 108.585890] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc992642d8 [ 108.585891] R13: 00005577814ab2ba R14: 00005577814addf0 R15: 00007f605876d000 [ 108.587920] cpu_startup_entry+0x1d/0x20 [ 108.591422] </TASK> [ 108.596127] rest_init+0xc5/0xd0 [ 108.600490] ---[ end trace 0000000000000000 ]--- Test Setup: DUT: - Change mac address on DUT Side. Ensure NIC not having same MAC Address - Running udp_tai on DUT side. Let udp_tai running throughout the test Example: ./udp_tai -i enp170s0 -P 100000 -p 90 -c 1 -t 0 -u 30004 Host: - Perform link up/down every 5 second. Result: Kernel panic will happen on DUT Side. Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-31net/sched: taprio: replace tc_taprio_qopt_offload :: enable with a "cmd" enumVladimir Oltean1-2/+11
Inspired from struct flow_cls_offload :: cmd, in order for taprio to be able to report statistics (which is future work), it seems that we need to drill one step further with the ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) multiplexing, and pass the command as part of the common portion of the muxed structure. Since we already have an "enable" variable in tc_taprio_qopt_offload, refactor all drivers to check for "cmd" instead of "enable", and reject every other command except "replace" and "destroy" - to be future proof. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> # for lan966x Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-05-18igc: Avoid transmit queue timeout for XDPKurt Kanzenbach1-0/+8
High XDP load triggers the netdev watchdog: |NETDEV WATCHDOG: enp3s0 (igc): transmit queue 2 timed out The reason is the Tx queue transmission start (txq->trans_start) is not updated in XDP code path. Therefore, add it for all XDP transmission functions. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16Merge tag 'for-netdev' of ↵Jakub Kicinski2-11/+140
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2023-05-16 We've added 57 non-merge commits during the last 19 day(s) which contain a total of 63 files changed, 3293 insertions(+), 690 deletions(-). The main changes are: 1) Add precision propagation to verifier for subprogs and callbacks, from Andrii Nakryiko. 2) Improve BPF's {g,s}setsockopt() handling with wrong option lengths, from Stanislav Fomichev. 3) Utilize pahole v1.25 for the kernel's BTF generation to filter out inconsistent function prototypes, from Alan Maguire. 4) Various dyn-pointer verifier improvements to relax restrictions, from Daniel Rosenberg. 5) Add a new bpf_task_under_cgroup() kfunc for designated task, from Feng Zhou. 6) Unblock tests for arm64 BPF CI after ftrace supporting direct call, from Florent Revest. 7) Add XDP hint kfunc metadata for RX hash/timestamp for igc, from Jesper Dangaard Brouer. 8) Add several new dyn-pointer kfuncs to ease their usability, from Joanne Koong. 9) Add in-depth LRU internals description and dot function graph, from Joe Stringer. 10) Fix KCSAN report on bpf_lru_list when accessing node->ref, from Martin KaFai Lau. 11) Only dump unprivileged_bpf_disabled log warning upon write, from Kui-Feng Lee. 12) Extend test_progs to directly passing allow/denylist file, from Stephen Veiss. 13) Fix BPF trampoline memleak upon failure attaching to fentry, from Yafang Shao. 14) Fix emitting struct bpf_tcp_sock type in vmlinux BTF, from Yonghong Song. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (57 commits) bpf: Fix memleak due to fentry attach failure bpf: Remove bpf trampoline selector bpf, arm64: Support struct arguments in the BPF trampoline bpftool: JIT limited misreported as negative value on aarch64 bpf: fix calculation of subseq_idx during precision backtracking bpf: Remove anonymous union in bpf_kfunc_call_arg_meta bpf: Document EFAULT changes for sockopt selftests/bpf: Correctly handle optlen > 4096 selftests/bpf: Update EFAULT {g,s}etsockopt selftests bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen libbpf: fix offsetof() and container_of() to work with CO-RE bpf: Address KCSAN report on bpf_lru_list bpf: Add --skip_encoding_btf_inconsistent_proto, --btf_gen_optimized to pahole flags for v1.25 selftests/bpf: Accept mem from dynptr in helper funcs bpf: verifier: Accept dynptr mem as mem in helpers selftests/bpf: Check overflow in optional buffer selftests/bpf: Test allowing NULL buffer in dynptr slice bpf: Allow NULL buffers in bpf_dynptr_slice(_rw) selftests/bpf: Add testcase for bpf_task_under_cgroup bpf: Add bpf_task_under_cgroup() kfunc ... ==================== Link: https://lore.kernel.org/r/20230515225603.27027-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-03igc: read before write to SRRCTL registerSong Yoong Siang2-5/+13
igc_configure_rx_ring() function will be called as part of XDP program setup. If Rx hardware timestamp is enabled prio to XDP program setup, this timestamp enablement will be overwritten when buffer size is written into SRRCTL register. Thus, this commit read the register value before write to SRRCTL register. This commit is tested by using xdp_hw_metadata bpf selftest tool. The tool enables Rx hardware timestamp and then attach XDP program to igc driver. It will display hardware timestamp of UDP packet with port number 9092. Below are detail of test steps and results. Command on DUT: sudo ./xdp_hw_metadata <interface name> Command on Link Partner: echo -n skb | nc -u -q1 <destination IPv4 addr> 9092 Result before this patch: skb hwtstamp is not found! Result after this patch: found skb hwtstamp = 1677800973.642836757 Optionally, read PHC to confirm the values obtained are almost the same: Command: sudo ./testptp -d /dev/ptp0 -g Result: clock time: 1677800973.913598978 or Fri Mar 3 07:49:33 2023 Fixes: fc9df2a0b520 ("igc: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.14+ Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-04-27igc: Add XDP hints kfuncs for RX timestampJesper Dangaard Brouer2-0/+17
The NIC hardware RX timestamping mechanism adds an optional tailored header before the MAC header containing packet reception time. Optional depending on RX descriptor TSIP status bit (IGC_RXDADV_STAT_TSIP). In case this bit is set driver does offset adjustments to packet data start and extracts the timestamp. The timestamp need to be extracted before invoking the XDP bpf_prog, because this area just before the packet is also accessible by XDP via data_meta context pointer (and helper bpf_xdp_adjust_meta). Thus, an XDP bpf_prog can potentially overwrite this and corrupt data that we want to extract with the new kfunc for reading the timestamp. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Yoong Siang <yoong.siang.song@intel.com> Link: https://lore.kernel.org/bpf/168182465791.616355.2583922957423587914.stgit@firesoul
2023-04-27igc: Add XDP hints kfuncs for RX hashJesper Dangaard Brouer2-0/+54
This implements XDP hints kfunc for RX-hash (xmo_rx_hash). The HW rss hash type is handled via mapping table. This igc driver (default config) does L3 hashing for UDP packets (excludes UDP src/dest ports in hash calc). Meaning RSS hash type is L3 based. Tested that the igc_rss_type_num for UDP is either IGC_RSS_TYPE_HASH_IPV4 or IGC_RSS_TYPE_HASH_IPV6. This patch also updates AF_XDP zero-copy function igc_clean_rx_irq_zc() to use the xdp_buff wrapper struct igc_xdp_buff. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Yoong Siang <yoong.siang.song@intel.com> Link: https://lore.kernel.org/bpf/168182465285.616355.2701740913376314790.stgit@firesoul
2023-04-27igc: Add igc_xdp_buff wrapper for xdp_buff in driverJesper Dangaard Brouer2-7/+14
Driver specific metadata data for XDP-hints kfuncs are propagated via tail extending the struct xdp_buff with a locally scoped driver struct. Zero-Copy AF_XDP/XSK does similar tricks via struct xdp_buff_xsk. This xdp_buff_xsk struct contains a CB area (24 bytes) that can be used for extending the locally scoped driver into. The XSK_CHECK_PRIV_TYPE define catch size violations build time. The changes needed for AF_XDP zero-copy in igc_clean_rx_irq_zc() is done in next patch, because the member rx_desc isn't available at this point. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Yoong Siang <yoong.siang.song@intel.com> Link: https://lore.kernel.org/bpf/168182464779.616355.3761989884165609387.stgit@firesoul
2023-04-27igc: Enable and fix RX hash usage by netstackJesper Dangaard Brouer2-4/+55
When function igc_rx_hash() was introduced in v4.20 via commit 0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers"), the hardware wasn't configured to provide RSS hash, thus it made sense to not enable net_device NETIF_F_RXHASH feature bit. The NIC hardware was configured to enable RSS hash info in v5.2 via commit 2121c2712f82 ("igc: Add multiple receive queues control supporting"), but forgot to set the NETIF_F_RXHASH feature bit. The original implementation of igc_rx_hash() didn't extract the associated pkt_hash_type, but statically set PKT_HASH_TYPE_L3. The largest portions of this patch are about extracting the RSS Type from the hardware and mapping this to enum pkt_hash_types. This was based on Foxville i225 software user manual rev-1.3.1 and tested on Intel Ethernet Controller I225-LM (rev 03). For UDP it's worth noting that RSS (type) hashing have been disabled both for IPv4 and IPv6 (see IGC_MRQC_RSS_FIELD_IPV4_UDP + IGC_MRQC_RSS_FIELD_IPV6_UDP) because hardware RSS doesn't handle fragmented pkts well when enabled (can cause out-of-order). This results in PKT_HASH_TYPE_L3 for UDP packets, and hash value doesn't include UDP port numbers. Not being PKT_HASH_TYPE_L4, have the effect that netstack will do a software based hash calc calling into flow_dissect, but only when code calls skb_get_hash(), which doesn't necessary happen for local delivery. For QA verification testing I wrote a small bpftrace prog: [0] https://github.com/xdp-project/xdp-project/blob/master/areas/hints/monitor_skb_hash_on_dev.bt Fixes: 2121c2712f82 ("igc: Add multiple receive queues control supporting") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Song Yoong Siang <yoong.siang.song@intel.com> Link: https://lore.kernel.org/bpf/168182464270.616355.11391652654430626584.stgit@firesoul
2023-03-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-10/+10
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en_tc.c 6e9d51b1a5cb ("net/mlx5e: Initialize link speed to zero") 1bffcea42926 ("net/mlx5e: Add devlink hairpin queues parameters") https://lore.kernel.org/all/20230324120623.4ebbc66f@canb.auug.org.au/ https://lore.kernel.org/all/20230321211135.47711-1-saeed@kernel.org/ Adjacent changes: drivers/net/phy/phy.c 323fe43cf9ae ("net: phy: Improved PHY error reporting in state machine") 4203d84032e2 ("net: phy: Ensure state transitions are processed from phy_stop()") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-21igc: Remove obsolete DMA coalescing codeSasha Neftin3-18/+5
DMA coalescing is not applicable for i225 parts. This patch comes to tidy up the driver code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-16igc: fix the validation logic for taprio's gate listAKASHI Takahiro1-10/+10
The check introduced in the commit a5fd39464a40 ("igc: Lift TAPRIO schedule restriction") can detect a false positive error in some corner case. For instance, tc qdisc replace ... taprio num_tc 4 ... sched-entry S 0x01 100000 # slot#1 sched-entry S 0x03 100000 # slot#2 sched-entry S 0x04 100000 # slot#3 sched-entry S 0x08 200000 # slot#4 flags 0x02 # hardware offload Here the queue#0 (the first queue) is on at the slot#1 and #2, and off at the slot#3 and #4. Under the current logic, when the slot#4 is examined, validate_schedule() returns *false* since the enablement count for the queue#0 is two and it is already off at the previous slot (i.e. #3). But this definition is truely correct. Let's fix the logic to enforce a strict validation for consecutively-opened slots. Fixes: a5fd39464a40 ("igc: Lift TAPRIO schedule restriction") Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-09Merge branch '1GbE' of ↵Jakub Kicinski5-23/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (igc) This series contains updates to igc driver only. Muhammad adds tracking and reporting of QBV config errors. Tan Tee adds support for configuring max SDU for each Tx queue. Sasha removes check for alternate media as only one media type is supported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: igc: Clean up and optimize watchdog task igc: offload queue max SDU from tc-taprio igc: Add qbv_config_change_errors counter ==================== Link: https://lore.kernel.org/r/20230307221332.3997881-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08igc: Remove unnecessary aer.h includeBjorn Helgaas1-1/+0
<linux/aer.h> is unused, so remove it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-07igc: Clean up and optimize watchdog taskSasha Neftin2-19/+0
i225/i226 parts used only one media type copper. The copper media type is not replaceable. Clean up the code accordingly, and remove the obsolete media replacement and reset options. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07igc: offload queue max SDU from tc-taprioTan Tee Min3-4/+31
Add support for configuring the max SDU for each Tx queue. If not specified, keep the default. Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07igc: Add qbv_config_change_errors counterMuhammad Husaini Zulkifli4-0/+15
Add ConfigChangeError(qbv_config_change_errors) when user try to set the AdminBaseTime to past value while the current GCL is still running. The ConfigChangeError counter should not be increased when a gate control list is scheduled into the future. User can use "ethtool -S <interface> | grep qbv_config_change_errors" command to check the counter values. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-10Daniel Borkmann says:Jakub Kicinski2-0/+8
==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e533d01 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+23
net/devlink/leftover.c / net/core/devlink.c: 565b4824c39f ("devlink: change port event netdev notifier from per-net to global") f05bd8ebeb69 ("devlink: move code to a dedicated directory") 687125b5799c ("devlink: split out core code") https://lore.kernel.org/all/20230208094657.379f2b1a@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-08net/sched: taprio: give higher priority to higher TCs in software dequeue modeVladimir Oltean1-3/+3
Current taprio software implementation is haunted by the shadow of the igb/igc hardware model. It iterates over child qdiscs in increasing order of TXQ index, therefore giving higher xmit priority to TXQ 0 and lower to TXQ N. According to discussions with Vinicius, that is the default (perhaps even unchangeable) prioritization scheme used for the NICs that taprio was first written for (igb, igc), and we have a case of two bugs canceling out, resulting in a functional setup on igb/igc, but a less sane one on other NICs. To the best of my understanding, taprio should prioritize based on the traffic class, so it should really dequeue starting with the highest traffic class and going down from there. We get to the TXQ using the tc_to_txq[] netdev property. TXQs within the same TC have the same (strict) priority, so we should pick from them as fairly as we can. We can achieve that by implementing something very similar to q->curband from multiq_dequeue(). Since igb/igc really do have TXQ 0 of higher hardware priority than TXQ 1 etc, we need to preserve the behavior for them as well. We really have no choice, because in txtime-assist mode, taprio is essentially a software scheduler towards offloaded child tc-etf qdiscs, so the TXQ selection really does matter (not all igb TXQs support ETF/SO_TXTIME, says Kurt Kanzenbach). To preserve the behavior, we need a capability bit so that taprio can determine if it's running on igb/igc, or on something else. Because igb doesn't offload taprio at all, we can't piggyback on the qdisc_offload_query_caps() call from taprio_enable_offload(), but instead we need a separate call which is also made for software scheduling. Introduce two static keys to minimize the performance penalty on systems which only have igb/igc NICs, and on systems which only have other NICs. For mixed systems, taprio will have to dynamically check whether to dequeue using one prioritization algorithm or using the other. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-07igc: Add ndo_tx_timeout supportSasha Neftin1-2/+23
On some platforms, 100/1000/2500 speeds seem to have sometimes problems reporting false positive tx unit hang during stressful UDP traffic. Likely other Intel drivers introduce responses to a tx hang. Update the 'tx hang' comparator with the comparison of the head and tail of ring pointers and restore the tx_timeout_factor to the previous value (one). This can be test by using netperf or iperf3 applications. Example: iperf3 -s -p 5001 iperf3 -c 192.168.0.2 --udp -p 5001 --time 600 -b 0 netserver -p 16604 netperf -H 192.168.0.2 -l 600 -p 16604 -t UDP_STREAM -- -m 64000 Fixes: b27b8dc77b5e ("igc: Increase timeout value for Speed 100/1000/2500") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230206235818.662384-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-06net/sched: taprio: only pass gate mask per TXQ for igc, stmmac, tsnep, am65_cpswVladimir Oltean1-0/+23
There are 2 classes of in-tree drivers currently: - those who act upon struct tc_taprio_sched_entry :: gate_mask as if it holds a bit mask of TXQs - those who act upon the gate_mask as if it holds a bit mask of TCs When it comes to the standard, IEEE 802.1Q-2018 does say this in the second paragraph of section 8.6.8.4 Enhancements for scheduled traffic: | A gate control list associated with each Port contains an ordered list | of gate operations. Each gate operation changes the transmission gate | state for the gate associated with each of the Port's traffic class | queues and allows associated control operations to be scheduled. In typically obtuse language, it refers to a "traffic class queue" rather than a "traffic class" or a "queue". But careful reading of 802.1Q clarifies that "traffic class" and "queue" are in fact synonymous (see 8.6.6 Queuing frames): | A queue in this context is not necessarily a single FIFO data structure. | A queue is a record of all frames of a given traffic class awaiting | transmission on a given Bridge Port. The structure of this record is not | specified. i.o.w. their definition of "queue" isn't the Linux TX queue. The gate_mask really is input into taprio via its UAPI as a mask of traffic classes, but taprio_sched_to_offload() converts it into a TXQ mask. The breakdown of drivers which handle TC_SETUP_QDISC_TAPRIO is: - hellcreek, felix, sja1105: these are DSA switches, it's not even very clear what TXQs correspond to, other than purely software constructs. Only the mqprio configuration with 8 TCs and 1 TXQ per TC makes sense. So it's fine to convert these to a gate mask per TC. - enetc: I have the hardware and can confirm that the gate mask is per TC, and affects all TXQs (BD rings) configured for that priority. - igc: in igc_save_qbv_schedule(), the gate_mask is clearly interpreted to be per-TXQ. - tsnep: Gerhard Engleder clarifies that even though this hardware supports at most 1 TXQ per TC, the TXQ indices may be different from the TC values themselves, and it is the TXQ indices that matter to this hardware. So keep it per-TXQ as well. - stmmac: I have a GMAC datasheet, and in the EST section it does specify that the gate events are per TXQ rather than per TC. - lan966x: again, this is a switch, and while not a DSA one, the way in which it implements lan966x_mqprio_add() - by only allowing num_tc == NUM_PRIO_QUEUES (8) - makes it clear to me that TXQs are a purely software construct here as well. They seem to map 1:1 with TCs. - am65_cpsw: from looking at am65_cpsw_est_set_sched_cmds(), I get the impression that the fetch_allow variable is treated like a prio_mask. This definitely sounds closer to a per-TC gate mask rather than a per-TXQ one, and TI documentation does seem to recomment an identity mapping between TCs and TXQs. However, Roger Quadros would like to do some testing before making changes, so I'm leaving this driver to operate as it did before, for now. Link with more details at the end. Based on this breakdown, we have 5 drivers with a gate mask per TC and 4 with a gate mask per TXQ. So let's make the gate mask per TXQ the opt-in and the gate mask per TC the default. Benefit from the TC_QUERY_CAPS feature that Jakub suggested we add, and query the device driver before calling the proper ndo_setup_tc(), and figure out if it expects one or the other format. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230202003621.2679603-15-vladimir.oltean@nxp.com/#25193204 Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Cc: Siddharth Vadapalli <s-vadapalli@ti.com> Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Kurt Kanzenbach <kurt@linutronix.de> # hellcreek Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-02drivers: net: turn on XDP featuresMarek Majtyka2-0/+8
A summary of the flags being set for various drivers is given below. Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features that can be turned off and on at runtime. This means that these flags may be set and unset under RTNL lock protection by the driver. Hence, READ_ONCE must be used by code loading the flag value. Also, these flags are not used for synchronization against the availability of XDP resources on a device. It is merely a hint, and hence the read may race with the actual teardown of XDP resources on the device. This may change in the future, e.g. operations taking a reference on the XDP resources of the driver, and in turn inhibiting turning off this flag. However, for now, it can only be used as a hint to check whether device supports becoming a redirection target. Turn 'hw-offload' feature flag on for: - netronome (nfp) - netdevsim. Turn 'native' and 'zerocopy' features flags on for: - intel (i40e, ice, ixgbe, igc) - mellanox (mlx5). - stmmac - netronome (nfp) Turn 'native' features flags on for: - amazon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2, enetc) - funeth - intel (igb) - marvell (mvneta, mvpp2, octeontx2) - mellanox (mlx4) - mtk_eth_soc - qlogic (qede) - sfc - socionext (netsec) - ti (cpsw) - tap - tsnep - veth - xen - virtio_net. Turn 'basic' (tx, pass, aborted and drop) features flags on for: - netronome (nfp) - cavium (thunder) - hyperv. Turn 'redirect_target' feature flag on for: - amanzon (ena) - broadcom (bnxt) - freescale (dpaa, dpaa2) - intel (i40e, ice, igb, ixgbe) - ti (cpsw) - marvell (mvneta, mvpp2) - sfc - socionext (netsec) - qlogic (qede) - mellanox (mlx5) - tap - veth - virtio_net - xen Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Marek Majtyka <alardam@gmail.com> Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-5/+9
net/core/gro.c 7d2c89b32587 ("skb: Do mix page pool and page referenced frags in GRO") b1a78b9b9886 ("net: add support for ipv4 big tcp") https://lore.kernel.org/all/20230203094454.5766f160@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-01igc: return an error if the mac type is unknown in igc_ptp_systim_to_hwtstamp()Tom Rix1-5/+9
clang static analysis reports drivers/net/ethernet/intel/igc/igc_ptp.c:673:3: warning: The left operand of '+' is a garbage value [core.UndefinedBinaryOperatorResult] ktime_add_ns(shhwtstamps.hwtstamp, adjust); ^ ~~~~~~~~~~~~~~~~~~~~ igc_ptp_systim_to_hwtstamp() silently returns without setting the hwtstamp if the mac type is unknown. This should be treated as an error. Fixes: 81b055205e8b ("igc: Add support for RX timestamping") Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20230131215437.1528994-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-30igc: Remove redundant pci_enable_pcie_error_reporting()Bjorn Helgaas1-5/+0
pci_enable_pcie_error_reporting() enables the device to send ERR_* Messages. Since f26e58bf6f54 ("PCI/AER: Enable error reporting when AER is native"), the PCI core does this for all devices during enumeration. Remove the redundant pci_enable_pcie_error_reporting() call from the driver. Also remove the corresponding pci_disable_pcie_error_reporting() from the driver .remove() path. Note that this doesn't control interrupt generation by the Root Port; that is controlled by the AER Root Error Command register, which is managed by the AER service driver. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-4/+8
drivers/net/usb/r8152.c be53771c87f4 ("r8152: add vendor/device ID pair for Microsoft Devkit") ec51fbd1b8a2 ("r8152: add USB device driver for config selection") https://lore.kernel.org/all/20230113113339.658c4723@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-10igc: Fix PPS delta between two synchronized end-pointsChristopher S Hall2-4/+8
This patch fix the pulse per second output delta between two synchronized end-points. Based on Intel Discrete I225 Software User Manual Section 4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and ST1[Bit 7] must be set to ensure that clock output will be toggles based on frequency value defined. This is to ensure that output of the PPS is aligned with the clock. How to test: 1) Running time synchronization on both end points. Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name> 2) Configure PPS output using below command for both end-points Ex: SDP0 on I225 REV4 SKU variant ./testptp -d /dev/ptp0 -L 0,2 ./testptp -d /dev/ptp0 -p 1000000000 3) Measure the output using analyzer for both end-points Fixes: 87938851b6ef ("igc: enable auxiliary PHC functions for the i225") Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-03igc: Remove reset adapter task for i226 during disable tsn configMuhammad Husaini Zulkifli3-12/+7
I225 have limitation when programming the BaseTime register which required a power cycle of the controller. This limitation already lifted in I226. This patch removes the restriction so that when user configure/remove any TSN mode, it would not go into power cycle reset adapter. How to test: Schedule any gate control list configuration or delete it. Example: 1) BASE_TIME=$(date +%s%N) tc qdisc replace dev $interface_name parent root handle 100 taprio \ num_tc 4 \ map 3 1 0 2 3 3 3 3 3 3 3 3 3 3 3 3 \ queues 1@0 1@1 1@2 1@3 \ base-time $BASE_TIME \ sched-entry S 0F 1000000 \ flags 0x2 2) tc qdisc del dev $intername_name root Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-03igc: enable Qbv configuration for 2nd GCLTan Tee Min3-9/+15
Make reset task only executes for i225 and Qbv disabling to allow i226 configure for 2nd GCL without resetting the adapter. In i226, Tx won't hang if there is a GCL is already running, so in this case we don't need to set FutScdDis bit. Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-01-03igc: remove I226 Qbv BaseTime restrictionMuhammad Husaini Zulkifli5-16/+65
Remove the Qbv BaseTime restriction for I226 so that the BaseTime can be scheduled to the future time. A new register bit of Tx Qav Control (Bit-7: FutScdDis) was introduced to allow I226 scheduling future time as Qbv BaseTime and not having the Tx hang timeout issue. Besides, according to datasheet section 7.5.2.9.3.3, FutScdDis bit has to be configured first before the cycle time and base time. Indeed the FutScdDis bit is only active on re-configuration, thus we have to set the BASET_L to zero and then only set it to the desired value. Please also note that the Qbv configuration flow is moved around based on the Qbv programming guideline that is documented in the latest datasheet. Co-developed-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Set Qbv start_time and end_time to end_time if not being configured in GCLTan Tee Min1-1/+13
The default setting of end_time minus start_time is whole 1 second. Thus, if it's not being configured in any GCL entry then it will be staying at original 1 second. This patch is changing the start_time and end_time to be end_time as if setting zero will be having weird HW behavior where the gate will not be fully closed. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: recalculate Qbv end_time by considering cycle timeTan Tee Min1-0/+15
Qbv users can specify a cycle time that is not equal to the total GCL intervals. Hence, recalculation is necessary here to exclude the time interval that exceeds the cycle time. As those GCL which exceeds the cycle time will be truncated. According to IEEE Std. 802.1Q-2018 section 8.6.9.2, once the end of the list is reached, it will switch to the END_OF_CYCLE state and leave the gates in the same state until the next cycle is started. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: allow BaseTime 0 enrollment for QbvTan Tee Min3-1/+4
Introduce qbv_enable flag in igc_adapter struct to store the Qbv on/off. So this allow the BaseTime to enroll with zero value. Fixes: 61572d5f8f91 ("igc: Simplify TSN flags handling") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Add checking for basetime less than zeroMuhammad Husaini Zulkifli1-0/+3
Using the tc qdisc command, the user can set basetime to any value. Checking should be done on the driver's side to prevent registering basetime values that are less than zero. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Use strict cycles for Qbv schedulingVinicius Costa Gomes1-9/+2
Configuring strict cycle mode in the controller forces more well behaved transmissions when taprio is offloaded. When set this strict_cycle and strict_end, transmission is not enabled if the whole packet cannot be completed before end of the Qbv cycle. Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-12-15igc: Enhance Qbv scheduling by using first flag bitVinicius Costa Gomes3-29/+151
The I225 hardware has a limitation that packets can only be scheduled in the [0, cycle-time] interval. So, scheduling a packet to the start of the next cycle doesn't usually work. To overcome this, we use the Transmit Descriptor first flag to indicates that a packet should be the first packet (from a queue) in a cycle according to the section 7.5.2.9.3.4 The First Packet on Each QBV Cycle in Intel Discrete I225/6 User Manual. But this only works if there was any packet from that queue during the current cycle, to avoid this issue, we issue an empty packet if that's not the case. Also require one more descriptor to be available, to take into account the empty packet that might be issued. Test Setup: Talker: Use l2_tai to generate the launchtime into packet load. Listener: Use timedump.c to compute the delta between packet arrival and LaunchTime packet payload. Test Result: Before: 1666000610127300000,1666000610127300096,96,621273 1666000610127400000,1666000610127400192,192,621274 1666000610127500000,1666000610127500032,32,621275 1666000610127600000,1666000610127600128,128,621276 1666000610127700000,1666000610127700224,224,621277 1666000610127800000,1666000610127800064,64,621278 1666000610127900000,1666000610127900160,160,621279 1666000610128000000,1666000610128000000,0,621280 1666000610128100000,1666000610128100096,96,621281 1666000610128200000,1666000610128200192,192,621282 1666000610128300000,1666000610128300032,32,621283 1666000610128400000,1666000610128301056,-98944,621284 1666000610128500000,1666000610128302080,-197920,621285 1666000610128600000,1666000610128302848,-297152,621286 1666000610128700000,1666000610128303872,-396128,621287 1666000610128800000,1666000610128304896,-495104,621288 1666000610128900000,1666000610128305664,-594336,621289 1666000610129000000,1666000610128306688,-693312,621290 1666000610129100000,1666000610128307712,-792288,621291 1666000610129200000,1666000610128308480,-891520,621292 1666000610129300000,1666000610128309504,-990496,621293 1666000610129400000,1666000610128310528,-1089472,621294 1666000610129500000,1666000610128311296,-1188704,621295 1666000610129600000,1666000610128312320,-1287680,621296 1666000610129700000,1666000610128313344,-1386656,621297 1666000610129800000,1666000610128314112,-1485888,621298 1666000610129900000,1666000610128315136,-1584864,621299 1666000610130000000,1666000610128316160,-1683840,621300 1666000610130100000,1666000610128316928,-1783072,621301 1666000610130200000,1666000610128317952,-1882048,621302 1666000610130300000,1666000610128318976,-1981024,621303 1666000610130400000,1666000610128319744,-2080256,621304 1666000610130500000,1666000610128320768,-2179232,621305 1666000610130600000,1666000610128321792,-2278208,621306 1666000610130700000,1666000610128322816,-2377184,621307 1666000610130800000,1666000610128323584,-2476416,621308 1666000610130900000,1666000610128324608,-2575392,621309 1666000610131000000,1666000610128325632,-2674368,621310 1666000610131100000,1666000610128326400,-2773600,621311 1666000610131200000,1666000610128327424,-2872576,621312 1666000610131300000,1666000610128328448,-2971552,621313 1666000610131400000,1666000610128329216,-3070784,621314 1666000610131500000,1666000610131500032,32,621315 1666000610131600000,1666000610131600128,128,621316 1666000610131700000,1666000610131700224,224,621317 After: 1666073510646200000,1666073510646200064,64,2676462 1666073510646300000,1666073510646300160,160,2676463 1666073510646400000,1666073510646400256,256,2676464 1666073510646500000,1666073510646500096,96,2676465 1666073510646600000,1666073510646600192,192,2676466 1666073510646700000,1666073510646700032,32,2676467 1666073510646800000,1666073510646800128,128,2676468 1666073510646900000,1666073510646900224,224,2676469 1666073510647000000,1666073510647000064,64,2676470 1666073510647100000,1666073510647100160,160,2676471 1666073510647200000,1666073510647200256,256,2676472 1666073510647300000,1666073510647300096,96,2676473 1666073510647400000,1666073510647400192,192,2676474 1666073510647500000,1666073510647500032,32,2676475 1666073510647600000,1666073510647600128,128,2676476 1666073510647700000,1666073510647700224,224,2676477 1666073510647800000,1666073510647800064,64,2676478 1666073510647900000,1666073510647900160,160,2676479 1666073510648000000,1666073510648000000,0,2676480 1666073510648100000,1666073510648100096,96,2676481 1666073510648200000,1666073510648200192,192,2676482 1666073510648300000,1666073510648300032,32,2676483 1666073510648400000,1666073510648400128,128,2676484 1666073510648500000,1666073510648500224,224,2676485 1666073510648600000,1666073510648600064,64,2676486 1666073510648700000,1666073510648700160,160,2676487 1666073510648800000,1666073510648800000,0,2676488 1666073510648900000,1666073510648900096,96,2676489 1666073510649000000,1666073510649000192,192,2676490 1666073510649100000,1666073510649100032,32,2676491 1666073510649200000,1666073510649200128,128,2676492 1666073510649300000,1666073510649300224,224,2676493 1666073510649400000,1666073510649400064,64,2676494 1666073510649500000,1666073510649500160,160,2676495 1666073510649600000,1666073510649600000,0,2676496 1666073510649700000,1666073510649700096,96,2676497 1666073510649800000,1666073510649800192,192,2676498 1666073510649900000,1666073510649900032,32,2676499 1666073510650000000,1666073510650000128,128,2676500 Fixes: 82faa9b79950 ("igc: Add support for ETF offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Co-developed-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Signed-off-by: Aravindhan Gunasekaran <aravindhan.gunasekaran@intel.com> Co-developed-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Signed-off-by: Malli C <mallikarjuna.chilakala@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02igc: Correct the launchtime offsetMuhammad Husaini Zulkifli5-0/+48
The launchtime offset should be corrected according to sections 7.5.2.6 Transmit Scheduling Latency of the Intel Ethernet I225/I226 Software User Manual. Software can compensate the latency between the transmission scheduling and the time that packet is transmitted to the network by setting this GTxOffset register. Without setting this register, there may be a significant delay between the packet scheduling and the network point. This patch helps to reduce the latency for each of the link speed. Before: 10Mbps : 11000 - 13800 nanosecond 100Mbps : 1300 - 1700 nanosecond 1000Mbps : 190 - 600 nanosecond 2500Mbps : 1400 - 1700 nanosecond After: 10Mbps : less than 750 nanosecond 100Mbps : less than 192 nanosecond 1000Mbps : less than 128 nanosecond 2500Mbps : less than 128 nanosecond Test Setup: Talker : Use l2_tai.c to generate the launchtime into packet payload. Listener: Use timedump.c to compute the delta between packet arrival and LaunchTime packet payload. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-10-28net: Remove the obsolte u64_stats_fetch_*_irq() users (drivers).Thomas Gleixner2-10/+10
Now that the 32bit UP oddity is gone and 32bit uses always a sequence count, there is no need for the fetch_irq() variants anymore. Convert to the regular interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-28net: drop the weight argument from netif_napi_addJakub Kicinski1-2/+1
We tell driver developers to always pass NAPI_POLL_WEIGHT as the weight to netif_napi_add(). This may be confusing to newcomers, drop the weight argument, those who really need to tweak the weight can use netif_napi_add_weight(). Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220927132753.750069-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-08igc: Remove IGC_MDIC_INT_EN definitionSasha Neftin1-1/+0
IGC_MDIC_INT_EN definition is not used. This patch comes to tidy up the driver code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18igc: add xdp frags support to ndo_xdp_xmitLorenzo Bianconi1-45/+83
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817173628.109102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+7
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-18igc: Remove forced_speed_duplex valueSasha Neftin1-2/+0
u8 forced_speed_duplex from value from igc_mac_info struct is not used. This patch comes to tidy up the driver code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-18igc: Remove MSI-X PBA Clear registerSasha Neftin1-3/+0
MSI-X PBA Clear register is not used. This patch comes to tidy up the driver code. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-18igc: Lift TAPRIO schedule restrictionKurt Kanzenbach1-6/+17
Add support for Qbv schedules where one queue stays open in consecutive entries. Currently that's not supported. Example schedule: |tc qdisc replace dev ${INTERFACE} handle 100 parent root taprio num_tc 3 \ | map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \ | queues 1@0 1@1 2@2 \ | base-time ${BASETIME} \ | sched-entry S 0x01 300000 \ # Stream High/Low | sched-entry S 0x06 500000 \ # Management and Best Effort | sched-entry S 0x04 200000 \ # Best Effort | flags 0x02 Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-14igc: Reinstate IGC_REMOVED logic and implement it properlyLennert Buytenhek2-1/+7
The initially merged version of the igc driver code (via commit 146740f9abc4, "igc: Add support for PF") contained the following IGC_REMOVED checks in the igc_rd32/wr32() MMIO accessors: u32 igc_rd32(struct igc_hw *hw, u32 reg) { u8 __iomem *hw_addr = READ_ONCE(hw->hw_addr); u32 value = 0; if (IGC_REMOVED(hw_addr)) return ~value; value = readl(&hw_addr[reg]); /* reads should not return all F's */ if (!(~value) && (!reg || !(~readl(hw_addr)))) hw->hw_addr = NULL; return value; } And: #define wr32(reg, val) \ do { \ u8 __iomem *hw_addr = READ_ONCE((hw)->hw_addr); \ if (!IGC_REMOVED(hw_addr)) \ writel((val), &hw_addr[(reg)]); \ } while (0) E.g. igb has similar checks in its MMIO accessors, and has a similar macro E1000_REMOVED, which is implemented as follows: #define E1000_REMOVED(h) unlikely(!(h)) These checks serve to detect and take note of an 0xffffffff MMIO read return from the device, which can be caused by a PCIe link flap or some other kind of PCI bus error, and to avoid performing MMIO reads and writes from that point onwards. However, the IGC_REMOVED macro was not originally implemented: #ifndef IGC_REMOVED #define IGC_REMOVED(a) (0) #endif /* IGC_REMOVED */ This led to the IGC_REMOVED logic to be removed entirely in a subsequent commit (commit 3c215fb18e70, "igc: remove IGC_REMOVED function"), with the rationale that such checks matter only for virtualization and that igc does not support virtualization -- but a PCIe device can become detached even without virtualization being in use, and without proper checks, a PCIe bus error affecting an igc adapter will lead to various NULL pointer dereferences, as the first access after the error will set hw->hw_addr to NULL, and subsequent accesses will blindly dereference this now-NULL pointer. This patch reinstates the IGC_REMOVED checks in igc_rd32/wr32(), and implements IGC_REMOVED the way it is done for igb, by checking for the unlikely() case of hw_addr being NULL. This change prevents the oopses seen when a PCIe link flap occurs on an igc adapter. Fixes: 146740f9abc4 ("igc: Add support for PF") Signed-off-by: Lennert Buytenhek <buytenh@arista.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.