aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc/igc_mac.c
AgeCommit message (Collapse)AuthorFilesLines
2022-06-30intel/igc:fix repeated words in commentsJilin Yuan1-1/+1
Delete the redundant word 'frames'. Signed-off-by: Jilin Yuan <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2021-02-01igc: check return value of ret_val in igc_config_fc_after_link_upKevin Lo1-1/+1
Check return value from ret_val to make error check actually work. Fixes: 4eb8080143a9 ("igc: Add setup link functionality") Signed-off-by: Kevin Lo <[email protected]> Acked-by: Sasha Neftin <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-27igc: Fix static checker warningSasha Neftin1-1/+1
drivers/net/ethernet/intel/igc/igc_mac.c:424 igc_check_for_copper_link() error: uninitialized symbol 'link'. This patch come to fix this warning and initialize the 'link' symbol. Reported-by: Dan Carpenter <[email protected]> Fixes: 707abf069548 ("igc: Add initial LTR support") Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-27igc: Clean up the hw_stats structureSasha Neftin1-3/+0
Remove ictxptc, ictxatc, cbtmpc, cbrdpc, cbrmpc and htcbdpc fields from the hw_stats structure. Accordance to the i225 device specification these fields not in use. This patch come to clean up the driver code. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-27igc: Fix registers definitionSasha Neftin1-4/+0
IGC_ICTXPTC and IGC_ICTXATC are already defined elsewhere, remove this double definition. Also, remove unneeded registers as they are not applicable to i225 devices. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-27igc: Remove unneeded ICTXQMTC registerSasha Neftin1-1/+0
Tx Queue Min Threshold Count register no applicable for the i225 device. This patch comes to clean up it. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-27igc: Add Receive Descriptor Minimum Threshold Count to clear HW countersSasha Neftin1-0/+1
The statistics of this register are being tracked, however, the register was inadvertently missed when implementing igc_clear_hw_cntrs_base(). The register is clear on read, so add it to the function so that the register is cleared when requested so the tracked count is accurate. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-27igc: Remove unneeded variableSasha Neftin1-1/+0
Though we are populating and tracking ictxqec, the value is not being used for anything so remove it altogether and save the register read. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-06-29igc: Remove checking media type during MAC initializationSasha Neftin1-5/+3
i225 device support only copper mode. There is no point to check media type in the igc_config_fc_after_link_up() method. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-29igc: Remove TCP segmentation TX fail counterSasha Neftin1-1/+0
TCP segmentation TX context fail counter is not applicable for i225 devices. This patch comes to clean up this counter. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown<[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-29igc: Add LPI countersSasha Neftin1-0/+2
Add EEE TX LPI and EEE RX LPI counters. A EEE TX LPI event occurs when the transmitter enters EEE (IEEE 802.3az) LPI state. A EEE RX LPI event occurs when the receiver detect link partner entry into EEE(IEEE 802.3az) LPI state. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-29igc: Add initial LTR supportSasha Neftin1-0/+5
The LTR message on the PCIe inform the requested latency on which the PCIe must become active to the downstream PCIe port of the system. This patch provide recommended LTR parameters by i225 specification. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-28igc: Fix wrong register nameSasha Neftin1-1/+1
Accordance to the i225 datasheet this register address used by Host Transmit Discarded Packet by MAC counter and not by not applicable Carrier Extension Error counter. This patch comes to fix this wrong definition. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-28igc: Remove Sequence Error CounterSasha Neftin1-1/+0
Accordance to the i225 datasheet sequence error counter does not applicable to the i225 device. This patch comes to clean up this counter. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-28igc: Add Receive Error CounterSasha Neftin1-0/+1
Receive error counter reflect total number of non-filtered packets received with errors. This includes: CRC error, symbol error, Rx data error and carrier extend error. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-28igc: Remove symbol error counterSasha Neftin1-1/+0
Accordance to the i225 datasheet symbol error counter does not applicable to the i225 device. This patch comes to clean up this counter. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-05-21igc: Remove obsolete circuit breaker registersSasha Neftin1-4/+0
Part of circuit breaker registers is obsolete and not applicable for i225 device. This patch comes to clean up these registers. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-10-21igc: Add set_rx_mode supportSasha Neftin1-0/+104
Add multicast addresses list to the MTA table. Implement basic Rx mode support. Add option for IPv6 address settings. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-09-09igc: Remove useless forward declarationSasha Neftin1-38/+35
Move igc_phy_setup_autoneg, igc_wait_autoneg and igc_set_fc_watermarks up to avoid forward declaration. It is not necessary to forward declare these static methods. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-05-28igc: Cleanup the redundant codeSasha Neftin1-20/+3
The default flow control settings for the i225 device is both 'rx' and 'tx' pause frames. There is no depend on the NVM value. This patch comes to fix this and clean up the driver code. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add setup link functionalitySasha Neftin1-0/+271
Add link establishment methods Add auto negotiation methods Add read MAC address method Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add code for PHY supportSasha Neftin1-0/+45
Add PHY's ID support Add support for initialization, acquire and release of PHY Enable register access Signed-off-by: Sasha Neftin <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add NVM supportSasha Neftin1-0/+170
Add code for NVM support and get MAC address, complete probe method. Signed-off-by: Sasha Neftin <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add HW initialization codeSasha Neftin1-0/+315
Add code for hardware initialization and reset Add code for semaphore handling Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add support for PFSasha Neftin1-0/+5
This patch adds the basic defines and structures needed by the PF for operation. With this it is possible to bring up the interface, but without being able to configure any of the filters on the interface itself. Add skeleton for a function pointers. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.