aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc/igc_base.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-10igc: Remove unused phy_type enumSasha Neftin1-2/+0
Complete to commit 8e153faf5827 ("igc: Remove unused phy type") i225 parts have only one PHY. There is no point to use phy_type enum. Clean up the code accordingly, and get rid of the unused enum lines. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-29igc: Change Device Reset to Port ResetSasha Neftin1-1/+1
The _reset_hw_base method switched from port reset (CTRL[26]) to device reset (CTRL[29]) since the FW was receiving an interrupt on CTRL[29]. FW code was later modified to also receive an interrupt on CTRL[26]. Since certain HW values are not reset to default by CTRL[29], we go back to CTRL[26] for the HW reset, as it meets all current requirements. This reverts commit bb4265ec24c1 ("igc: Update the MAC reset flow"). Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-29igc: Add new device IDSasha Neftin1-0/+1
Add new device ID for the next step of the silicon and reflect the I226_LMVP part. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-29igc: Remove media type checking on the PHY initializationSasha Neftin1-5/+0
i225 devices only have copper phy media type. There is no point in checking phy media type during the phy initialization. This patch cleans up a pointless check. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-07-20igc: Remove _I_PHY_ID checkingSasha Neftin1-9/+1
i225 devices have only one PHY vendor. There is no point checking _I_PHY_ID during the link establishment and auto-negotiation process. This patch comes to clean up these pointless checkings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-12-10igc: Add new device IDSasha Neftin1-0/+1
Add new device ID for the next step of the silicon and reflect the I226_K part. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-28igc: Add new device ID'sSasha Neftin1-0/+5
Add new device ID's for the next step of the silicon and reflect i221 and i226 parts Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-05-18igc: Use netdev log helpers in igc_base.cAndre Guedes1-3/+3
This patch coverts one pr_debug() call to hw_dbg() in order to keep log output aligned with the rest of the driver. hw_dbg() is actually a macro defined in igc_hw.h that expands to netdev_dbg(). Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Add new device IDs for i225 partSasha Neftin1-0/+3
Add new device IDs for the next step of i225 Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-17igc: Add SKU for i225 deviceSasha Neftin1-0/+1
Add support for blank NVM SKU Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-24igc: Add more SKUs for i225 deviceSasha Neftin1-0/+3
Add support for more SKUs. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-24igc: Update the MAC reset flowSasha Neftin1-1/+1
Use Device Reset flow instead of Port Reset flow. This flow performs a reset of the entire controller device, resulting in a state nearly approximating the state following a power-up reset or internal PCIe reset, except for system PCI configuration. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-28igc: Remove the obsolete workaroundSasha Neftin1-49/+0
Enables a resend request after the completion timeout workaround is not relevant for i225 device. This patch is clean code relevant this workaround. Minor cosmetic fixes, replace the 'spaces' with 'tabs' Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Add ethtool supportSasha Neftin1-0/+1
This patch adds basic ethtool support to the device to allow for configuration. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Remove the 'igc_get_phy_id_base' methodSasha Neftin1-17/+1
Remove the redundant 'igc_get_phy_id_base' method and use the 'igc_get_phy_id' method directly instead. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Remove the 'igc_read_mac_addr_base' methodSasha Neftin1-14/+1
Remove the redundant 'igc_read_mac_addr_base' method and use the 'igc_read_mac_addr' method directly instead. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Remove unneeded codeSasha Neftin1-21/+1
Remove the 'igc_get_link_up_info_base method' from igc_base.c file. Use the 'igc_get_speed_and_duplex_copper' method directly and reduce the code redundancy. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05igc: Fix code redundancySasha Neftin1-18/+2
Remove redundant igc_check_for_link_base code and replace it with an igc_check_for_copper_link method. Fix duplication of IGC_ADVTXD_PAYLEN_SHIFT mask declaration. Remove obsolete IGC_SCVPC register definition. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07igc: Remove set but not used variables 'ctrl_ext, link_mode'YueHaibing1-8/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/intel/igc/igc_base.c: In function 'igc_init_phy_params_base': drivers/net/ethernet/intel/igc/igc_base.c:240:6: warning: variable 'ctrl_ext' set but not used [-Wunused-but-set-variable] u32 ctrl_ext; drivers/net/ethernet/intel/igc/igc_base.c: In function 'igc_get_invariants_base': drivers/net/ethernet/intel/igc/igc_base.c:290:6: warning: variable 'link_mode' set but not used [-Wunused-but-set-variable] u32 link_mode = 0; It never used since introduction in commit c0071c7aa5fe ("igc: Add HW initialization code") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add setup link functionalitySasha Neftin1-0/+40
Add link establishment methods Add auto negotiation methods Add read MAC address method Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add code for PHY supportSasha Neftin1-0/+122
Add PHY's ID support Add support for initialization, acquire and release of PHY Enable register access Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add NVM supportSasha Neftin1-0/+109
Add code for NVM support and get MAC address, complete probe method. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add HW initialization codeSasha Neftin1-0/+187
Add code for hardware initialization and reset Add code for semaphore handling Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-17igc: Add support for Tx/Rx ringsSasha Neftin1-0/+83
This change adds the defines and structures necessary to support both Tx and Rx descriptor rings. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.