aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igc/igc.h
AgeCommit message (Collapse)AuthorFilesLines
2019-03-19igc: Add support for statisticsSasha Neftin1-0/+4
Add support for statistics and show basic counters. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-03-19igc: Extend the ethtool supportingSasha Neftin1-3/+52
Add show and configure network flow classification (NFC) methods to the ethtool. Show the specifies Rx ntuple filters. Configures receive network flow classification option or rules. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-03-19igc: Add multiple receive queues control supportingSasha Neftin1-0/+9
Enable the multi queues to receive. Program the direction of packets to specified queues according to the mode selected in the MRQC register. Multiple receive queues defined by filters and RSS for 4 queues. Enable/disable RSS hashing and also to enable multiple receive queues. This patch will allow further ethtool support development. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-02-05igc: Add ethtool supportSasha Neftin1-2/+32
This patch adds basic ethtool support to the device to allow for configuration. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-11-21igc: Remove obsolete IGC_ERR defineSasha Neftin1-2/+0
Address community comment. Remove obsolete IGC_ERR define and use dev_err method. Suggested by Joe Perches. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-11-07igc: Clean up codeSasha Neftin1-9/+0
Address few community comments. Remove unused code, will be added per demand. Remove blank lines and unneeded includes. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add watchdogSasha Neftin1-0/+12
Code completion, remove obsolete code Add watchdog methods Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add setup link functionalitySasha Neftin1-0/+1
Add link establishment methods Add auto negotiation methods Add read MAC address method Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add code for PHY supportSasha Neftin1-0/+16
Add PHY's ID support Add support for initialization, acquire and release of PHY Enable register access Signed-off-by: Sasha Neftin <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add NVM supportSasha Neftin1-0/+6
Add code for NVM support and get MAC address, complete probe method. Signed-off-by: Sasha Neftin <[email protected]> Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add transmit and receive fastpath and interrupt handlersSasha Neftin1-0/+66
This patch adds support for allocating, configuring, and freeing Tx/Rx ring resources. With these changes in place the descriptor queues are in a state where they are ready to transmit or receive if provided buffers. This also adds the transmit and receive fastpath and interrupt handlers. With this code in place the network device is now able to send and receive frames over the network interface using a single queue. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add support for Tx/Rx ringsSasha Neftin1-0/+125
This change adds the defines and structures necessary to support both Tx and Rx descriptor rings. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add interrupt supportSasha Neftin1-0/+127
This patch set adds interrupt support for the igc interfaces. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add netdevSasha Neftin1-0/+48
Now that we have the ability to configure the basic settings on the device we can start allocating and configuring a netdev for the interface. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add support for PFSasha Neftin1-0/+13
This patch adds the basic defines and structures needed by the PF for operation. With this it is possible to bring up the interface, but without being able to configure any of the filters on the interface itself. Add skeleton for a function pointers. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-10-17igc: Add skeletal frame for Intel(R) 2.5G Ethernet Controller supportSasha Neftin1-0/+29
This patch adds the beginning framework onto which I am going to add the igc driver which supports the Intel(R) I225-LM/I225-V 2.5G Ethernet Controller. Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.