aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/igb/igb_ethtool.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-28igb: add XDP supportSven Auhagen1-0/+4
Add XDP support to the IGB driver. The implementation follows the IXGBE XDP implementation closely and I used the following patches as basis: 1. commit 924708081629 ("ixgbe: add XDP support for pass and drop actions") 2. commit 33fdc82f0883 ("ixgbe: add support for XDP_TX action") 3. commit ed93a3987128 ("ixgbe: tweak page counting for XDP_REDIRECT") Due to the hardware constraints of the devices using the IGB driver we must share the TX queues with XDP which means locking the TX queue for XDP. I ran tests on an older device to get better numbers. Test machine: Intel(R) Atom(TM) CPU C2338 @ 1.74GHz (2 Cores) 2x Intel I211 Routing Original Driver Network Stack: 382 Kpps Routing XDP Redirect (xdp_fwd_kern): 1.48 Mpps XDP Drop: 1.48 Mpps Using XDP we can achieve line rate forwarding even on an older Intel Atom CPU. Signed-off-by: Sven Auhagen <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-30igb: Remove unnecessary usages of memsetSuraj Upadhyay1-2/+2
Replace memsets of 1 byte with simple assignment. Issue found with checkpatch.pl Signed-off-by: Suraj Upadhyay <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher1-4/+4
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-06-25net/intel: remove driver versions from Intel driversJeff Kirsher1-1/+0
As with other networking drivers, remove the unnecessary driver version from the Intel drivers. The ethtool driver information and module version will then report the kernel version instead. For ixgbe, i40e and ice drivers, the driver passes the driver version to the firmware to confirm that we are up and running. So we now pass the value of UTS_RELEASE to the firmware. This adminq call is required per the HAS document. The Device then sends an indication to the BMC that the PF driver is present. This is done using Host NC Driver Status Indication in NC-SI Get Link command or via the Host Network Controller Driver Status Change AEN. What the BMC may do with this information is implementation-dependent, but this is a standard NC-SI 1.1 command we honor per the HAS. CC: Bruce Allan <[email protected]> CC: Jesse Brandeburg <[email protected]> CC: Alek Loktionov <[email protected]> CC: Kevin Liedtke <[email protected]> CC: Aaron Rowden <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Co-developed-by: Jacob Keller <[email protected]> Tested-by: Aaron Brown <[email protected]>
2020-05-22igb: Report speed and duplex as unknown when device is runtime suspendedKai-Heng Feng1-1/+2
igb device gets runtime suspended when there's no link partner. We can't get correct speed under that state: $ cat /sys/class/net/enp3s0/speed 1000 In addition to that, an error can also be spotted in dmesg: [ 385.991957] igb 0000:03:00.0 enp3s0: PCIe link lost Since device can only be runtime suspended when there's no link partner, we can skip reading register and let the following logic set speed and duplex with correct status. The more generic approach will be wrap get_link_ksettings() with begin() and complete() callbacks. However, for this particular issue, begin() calls igb_runtime_resume() , which tries to rtnl_lock() while the lock is already hold by upper ethtool layer. So let's take this approach until the igb_runtime_resume() no longer needs to hold rtnl_lock. CC: stable <[email protected]> Suggested-by: Alexander Duyck <[email protected]> Signed-off-by: Kai-Heng Feng <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-03-12net: igb: let core reject the unsupported coalescing parametersJakub Kicinski1-21/+1
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver was rejecting almost all unsupported parameters already, it was only missing a check for tx_max_coalesced_frames_irq. As a side effect of these changes the error code for unsupported params changes from ENOTSUPP to EOPNOTSUPP. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-19Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
2020-01-09igb: Fix SGMII SFP module discovery for 100FX/LX.Manfred Rudigier1-1/+1
Changing the link mode should also be done for 100BaseFX SGMII modules, otherwise they just don't work when the default link mode in CTRL_EXT coming from the EEPROM is SERDES. Additionally 100Base-LX SGMII SFP modules are also supported now, which was not the case before. Tested with an i210 using Flexoptix S.1303.2M.G 100FX and S.1303.10.G 100LX SGMII SFP modules. Signed-off-by: Manfred Rudigier <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-12-31igb: dont drop packets if rx flow control is enabledRobert Beckett1-0/+8
If Rx flow control has been enabled (via autoneg or forced), packets should not be dropped due to Rx descriptor ring exhaustion. Instead pause frames should be used to apply back pressure. This only applies if VFs are not in use. Move SRRCTL setup to its own function for easy reuse and only set drop enable bit if Rx flow control is not enabled. Since v1: always enable dropping of packets if VFs in use. Signed-off-by: Robert Beckett <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-12-09treewide: Use sizeof_field() macroPankaj Bharadiya1-2/+2
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except at places where these are defined. Later patches will remove the unused definition of FIELD_SIZEOF(). This patch is generated using following script: EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h" git grep -l -e "\bFIELD_SIZEOF\b" | while read file; do if [[ "$file" =~ $EXCLUDE_FILES ]]; then continue fi sed -i -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file; done Signed-off-by: Pankaj Bharadiya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Co-developed-by: Kees Cook <[email protected]> Signed-off-by: Kees Cook <[email protected]> Acked-by: David Miller <[email protected]> # for net
2019-06-28igb: add RR2DCDELAY to ethtool registers dumpArtem Bityutskiy1-1/+4
This patch adds the RR2DCDELAY register to the ethtool registers dump. RR2DCDELAY exists on I210 and I211 Intel Gigabit Ethernet chips and it stands for "Read Request To Data Completion Delay". Here is how this register is described in the I210 datasheet: "This field captures the maximum PCIe split time in 16 ns units, which is the maximum delay between the read request to the first data completion. This is giving an estimation of the PCIe round trip time." In other words, whenever I210 reads from the host memory (e.g., fetches a descriptor from the ring), the chip measures every PCI DMA read transaction and captures the maximum value. So it ends up containing the longest DMA transaction time. This register is very useful for troubleshooting and research purposes. If you are dealing with time-sensitive networks, this register can help you get an idea of your "I210-to-ring" latency. This helps answering questions like "should I have PCIe ASPM enabled?" or "should I enable deep C-states?" on my system. It is safe to read this register at any point, reading it has no effect on the I210 chip functionality. Signed-off-by: Artem Bityutskiy <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-06-28igb: minor ethool regdump amendmentArtem Bityutskiy1-35/+35
This patch has no functional impact and it is just a preparation for the following patch. It removes an early return from the 'igb_get_regs()' function by moving the 82576-only registers dump into an "if" block. With this preparation, we can dump more non-82576 registers at the end of this function. Signed-off-by: Artem Bityutskiy <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-03-19igb: fix various indentation issuesColin Ian King1-2/+2
There are some lines that have indentation issues, fix these Signed-off-by: Colin Ian King <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-01-15Revert "igb: reduce CPU0 latency when updating statistics"Jeff Kirsher1-2/+2
This reverts commit 59361316afcb08569af21e1af83e89c7051c055a. Due to problems found in additional testing, this causes an illegal context switch in the RCU read-side critical section. CC: Dave Jones <[email protected]> CC: Cong Wang <[email protected]> CC: Jan Jablonsky <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-12-20igb: reduce CPU0 latency when updating statisticsJeff Kirsher1-2/+2
This change is based off of the work and suggestion of Jan Jablonsky <[email protected]>. The Watchdog workqueue in igb driver is scheduled every 2s for each network interface. That includes updating a statistics protected by spinlock. Function igb_update_stats in this case will be protected against preemption. According to number of a statistics registers (cca 60), processing this function might cause additional cpu load on CPU0. In case of statistics spinlock may be replaced with mutex, which reduce latency on CPU0. CC: Bernhard Kaindl <[email protected]> CC: Jan Jablonsky <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-11-07i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURETodd Fujinaka1-1/+1
There's a new flag for setting WoL filters that is only enabled on one manufacturer's NICs, and it's not ours. Fail with EOPNOTSUPP. Signed-off-by: Todd Fujinaka <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-08-24igb: Replace mdelay() with msleep() in igb_integrated_phy_loopback()Jia-Ju Bai1-1/+1
igb_integrated_phy_loopback() is never called in atomic context. It calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook1-4/+4
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-4/+4
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <[email protected]>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-22/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <[email protected]> Acked-by: Shannon Nelson <[email protected]> Acked-by: Richard Cochran <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-25igb: Add MAC address support for ethtool nftuple filtersVinicius Costa Gomes1-4/+39
This adds the capability of configuring the queue steering of arriving packets based on their source and destination MAC addresses. Source address steering (i.e. driving traffic to a specific queue), for the i210, does not work, but filtering does (i.e. accepting traffic based on the source address). So, trying to add a filter specifying only a source address will be an error. In practical terms this adds support for the following use cases, characterized by these examples: $ ethtool -N eth0 flow-type ether dst aa:aa:aa:aa:aa:aa action 0 (this will direct packets with destination address "aa:aa:aa:aa:aa:aa" to the RX queue 0) $ ethtool -N eth0 flow-type ether src 44:44:44:44:44:44 \ proto 0x22f0 action 3 (this will direct packets with source address "44:44:44:44:44:44" and ethertype 0x22f0 to the RX queue 3) Signed-off-by: Vinicius Costa Gomes <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-04-25igb: Enable nfc filters to specify MAC addressesVinicius Costa Gomes1-0/+28
This allows igb_add_filter()/igb_erase_filter() to work on filters that include MAC addresses (both source and destination). For now, this only exposes the functionality, the next commit glues ethtool into this. Later in this series, these APIs are used to allow offloading of cls_flower filters. Signed-off-by: Vinicius Costa Gomes <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-04-25igb: Fix not adding filter elements to the listVinicius Costa Gomes1-1/+1
Because the order of the parameters passes to 'hlist_add_behind()' was inverted, the 'parent' node was added "behind" the 'input', as input is not in the list, this causes the 'input' node to be lost. Fixes: 0e71def25281 ("igb: add support of RX network flow classification") Signed-off-by: Vinicius Costa Gomes <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-01-24igb: add function to get maximum RSS queuesZhang Shengju1-31/+1
This patch adds a new function igb_get_max_rss_queues() to get maximum RSS queues, this will reduce duplicate code and facilitate future maintenance. Signed-off-by: Zhang Shengju <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-06-06igb: Remove useless argumentBenjamin Poirier1-1/+1
Given that all callers of igb_update_stats() pass the same two arguments: (adapter, &adapter->stats64), the second argument can be removed. Signed-off-by: Benjamin Poirier <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-06-06igb: add statistic indicating number of skipped Tx timestampsJacob Keller1-0/+1
The igb driver can only handle one Tx timestamp request at a time. This means it is possible for an application timestamp request to be ignored. There is no easy way for an administrator to determine if this occurred. Add a new statistic which tracks this, tx_hwtstamp_skipped. Signed-off-by: Jacob Keller <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-03-21igb: use new API ethtool_{get|set}_link_ksettingsPhilippe Reynes1-65/+73
The ethtool API {get|set}_settings is deprecated. We move this driver to new API {get|set}_link_ksettings. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-03-17igb: Add support for ethtool private flag to allow use of legacy RxAlexander Duyck1-0/+48
Since there are potential drawbacks to the new Rx allocation approach I thought it best to add a "chicken bit" so that we can turn the feature off if in the event that a problem is found. It also provides a means of validating the legacy Rx path in the event that we are forced to fall back. At some point in the future when we are convinced we don't need it anymore we might be able to drop the legacy-rx flag. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-03-17igb: Only sync size of expected frame in ethtool testingAlexander Duyck1-2/+2
We only need to sync the size of the frame that is read to test. We don't need to sync the entire Rx buffer. This way the testing is more consistent with how we handle things in the receive path. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-03-17igb: Don't bother clearing Tx buffer_info in igb_clean_tx_ringAlexander Duyck1-1/+10
In the case of the Tx rings we need to only clear the Tx buffer_info when we are resetting the rings. Ideally we do this when we configure the ring to bring it back up instead of when we are taking it down in order to avoid dirtying pages we don't need to. In addition we don't need to clear the Tx descriptor ring since we will fully repopulate it when we begin transmitting frames and next_to_watch can be cleared to prevent the ring from being cleaned beyond that point instead of needing to touch anything in the Tx descriptor ring. Finally with these changes we can avoid having to reset the skb member of the Tx buffer_info structure in the cleanup path since the skb will always be associated with the first buffer which has next_to_watch set. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-03-17igb: Use length to determine if descriptor is doneAlexander Duyck1-1/+1
This change makes it so that we use the length of the packet instead of the DD status bit to determine if a new descriptor is ready to be processed. The obvious advantage is that it cuts down on reads as we don't really even need the DD bit if going from a 0 to a non-zero value on size is enough to inform us that the packet has been completed. In addition I have updated the code so that we only reset the Rx descriptor length for descriptor zero when resetting a ring instead of having to do a memset with 0 over the entire ring. By doing this we can save some time on initialization. Signed-off-by: Alexander Duyck <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-09-27igb: fix non static symbol warningWei Yongjun1-2/+2
Fixes the following sparse warning: drivers/net/ethernet/intel/igb/igb_ethtool.c:2707:5: warning: symbol 'igb_rxnfc_write_vlan_prio_filter' was not declared. Should it be static? Signed-off-by: Wei Yongjun <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-08-18igb: fix error code in igb_add_ethtool_nfc_entry()Gangfeng Huang1-1/+1
Use error "rmgr: Cannot insert RX class rule: Operation not supported" is more meaningful than "rmgr: Cannot insert RX class rule: Unknown error 524" Signed-off-by: Gangfeng Huang <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-08-18igb: support RX flow classification by VLAN priorityGangfeng Huang1-7/+84
This patch is meant to allow for RX network flow classification to insert and remove VLAN priority filter by ethtool Example: Add an VLAN priority filter: $ ethtool -N eth0 flow-type ether vlan 0x6000 vlan-mask 0x1FFF action 2 loc 1 Show all filters: $ ethtool -n eth0 4 RX rings available Total 1 rules Filter: 1 Flow Type: Raw Ethernet Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF Ethertype: 0x0 mask: 0xFFFF VLAN EtherType: 0x0 mask: 0xffff VLAN: 0x6000 mask: 0x1fff User-defined: 0x0 mask: 0xffffffffffffffff Action: Direct to queue 2 Delete the filter by location: $ ethtool -N delete 1 Signed-off-by: Ruhao Gao <[email protected]> Signed-off-by: Gangfeng Huang <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-08-18igb: support RX flow classification by ethertypeGangfeng Huang1-1/+76
This patch is meant to allow for RX network flow classification to insert and remove ethertype filter by ethtool Example: Add an ethertype filter: $ ethtool -N eth0 flow-type ether proto 0x88F8 action 2 Show all filters: $ ethtool -n eth0 4 RX rings available Total 1 rules Filter: 15 Flow Type: Raw Ethernet Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF Ethertype: 0x88F8 mask: 0x0 Action: Direct to queue 2 Delete the filter by location: $ ethtool -N delete 15 Signed-off-by: Ruhao Gao <[email protected]> Signed-off-by: Gangfeng Huang <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-08-18igb: add support of RX network flow classificationGangfeng Huang1-0/+193
This patch is meant to allow for RX network flow classification to insert and remove Rx filter by ethtool. Ethtool interface has it's own rules manager Show all filters: $ ethtool -n eth0 4 RX rings available Total 2 rules Signed-off-by: Ruhao Gao <[email protected]> Signed-off-by: Gangfeng Huang <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-05-13igb: use BIT() macro or unsigned prefixJacob Keller1-9/+9
For bitshifts, we should make use of the BIT macro when possible, and ensure that other bitshifts are marked as unsigned. This helps prevent signed bitshift errors, and ensures similar style. Make use of GENMASK and the unsigned postfix where BIT() isn't appropriate. Signed-off-by: Jacob Keller <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-04-06igb: Garbled output for "ethtool -m"Doron Shikmoni1-1/+2
Garbled output for "ethtool -m ethX", in igb-driven NICs with module / plugin EEPROM (i.e. SFP information). Each output data byte appears duplicated. In igb_ethtool.c, igb_get_module_eeprom() is reading the EEPROM via i2c; the eeprom offset for each word that's read via igb_read_phy_reg_i2c() was passed in #words, whereas it needs to be a byte offset. This patches fixes the bug. Signed-off-by: Doron Shikmoni <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2016-02-24igb: call ndo_stop() instead of dev_close() when running offline selftestStefan Assmann1-2/+2
Calling dev_close() causes IFF_UP to be cleared which will remove the interfaces routes and some addresses. That's probably not what the user intended when running the offline selftest. Besides this does not happen if the interface is brought down before the test, so the current behaviour is inconsistent. Instead call the net_device_ops ndo_stop function directly and avoid touching IFF_UP at all. Signed-off-by: Stefan Assmann <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-12-14igb: Explicitly label self-test result indicesJoe Schultz1-14/+24
Previously, the ethtool self-test gstrings/data arrays were accessed via hardcoded indices, which made the code difficult to follow. This patch replaces the hardcoded values with enum-based labels. Signed-off-by: Joe Schultz <[email protected]> Signed-off-by: Aaron Sierra <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera1-4/+0
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-18igb: Fix oops caused by missing queue pairingShota Suzuki1-1/+4
When initializing igb driver (e.g. 82576, I350), IGB_FLAG_QUEUE_PAIRS is set if adapter->rss_queues exceeds half of max_rss_queues in igb_init_queue_configuration(). On the other hand, IGB_FLAG_QUEUE_PAIRS is not set even if the number of queues exceeds half of max_combined in igb_set_channels() when changing the number of queues by "ethtool -L". In this case, if numvecs is larger than MAX_MSIX_ENTRIES (10), the size of adapter->msix_entries[], an overflow can occur in igb_set_interrupt_capability(), which in turn leads to an oops. Fix this problem as follows: - When changing the number of queues by "ethtool -L", set IGB_FLAG_QUEUE_PAIRS in the same way as initializing igb driver. - When increasing the size of q_vector, reallocate it appropriately. (With IGB_FLAG_QUEUE_PAIRS set, the size of q_vector gets larger.) Another possible way to fix this problem is to cap the queues at its initial number, which is the number of the initial online cpus. But this is not the optimal way because we cannot increase queues when another cpu becomes online. Note that before commit cd14ef54d25b ("igb: Change to use statically allocated array for MSIx entries"), this problem did not cause oops but just made the number of queues become 1 because of entering msi_only mode in igb_set_interrupt_capability(). Fixes: 907b7835799f ("igb: Add ethtool support to configure number of channels") CC: stable <[email protected]> Signed-off-by: Shota Suzuki <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-07-23igb: report unsupported ethtool settings in set_coalesceTodd Fujinaka1-0/+21
There are many settings possible using ethtool -C/--coalesce, but not all of them are supported in igb. Report failure when an unsupported option is set. Signed-off-by: Todd Fujinaka <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2015-07-17igb: only report generic filters in get_ts_infoJacob Keller1-4/+0
Signed-off-by: Jacob Keller <[email protected]> Acked-by: Richard Cochran <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-12-08ethtool: Support for configurable RSS hash functionEyal Perry1-2/+14
This patch extends the set/get_rxfh ethtool-options for getting or setting the RSS hash function. It modifies drivers implementation of set/get_rxfh accordingly. This change also delegates the responsibility of checking whether a modification to a certain RX flow hash parameter is supported to the driver implementation of set_rxfh. User-kernel API is done through the new hfunc bitmask field in the ethtool_rxfh struct. A bit set in the hfunc field is corresponding to an index in the new string-set ETH_SS_RSS_HASH_FUNCS. Got approval from most of the relevant driver maintainers that their driver is using Toeplitz, and for the few that didn't answered, also assumed it is Toeplitz. Cc: Tom Lendacky <[email protected]> Cc: Ariel Elior <[email protected]> Cc: Prashant Sreedharan <[email protected]> Cc: Michael Chan <[email protected]> Cc: Hariprasad S <[email protected]> Cc: Sathya Perla <[email protected]> Cc: Subbu Seetharaman <[email protected]> Cc: Ajit Khaparde <[email protected]> Cc: Jeff Kirsher <[email protected]> Cc: Jesse Brandeburg <[email protected]> Cc: Bruce Allan <[email protected]> Cc: Carolyn Wyborny <[email protected]> Cc: Don Skidmore <[email protected]> Cc: Greg Rose <[email protected]> Cc: Matthew Vick <[email protected]> Cc: John Ronciak <[email protected]> Cc: Mitch Williams <[email protected]> Cc: Amir Vadai <[email protected]> Cc: Solarflare linux maintainers <[email protected]> Cc: Shradha Shah <[email protected]> Cc: Shreyas Bhatewara <[email protected]> Cc: "VMware, Inc." <[email protected]> Cc: Ben Hutchings <[email protected]> Signed-off-by: Eyal Perry <[email protected]> Signed-off-by: Amir Vadai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-09-06igb: add flags to set eee advertisement modeTodd Fujinaka1-7/+17
Change e1000_set_eee and e1000_set_eee_i35(0|4) to allow changes in the advertised EEE speeds from ethtool. Adds two boolean flags to e1000_set_eee_i35(0|4) to pass in advertised speed data. Signed-off-by: Todd Fujinaka <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-06-11igb: unhide invariant returnsTodd Fujinaka1-5/+5
Return a 0 directly rather than a constant. Reported-by: Peter Senna Tschudin <[email protected]> Signed-off-by: Todd Fujinaka <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-06-06net: use ethtool_cmd_speed_set helper to set ethtool speed valueJiri Pirko1-5/+7
Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-06-06net: use SPEED_UNKNOWN and DUPLEX_UNKNOWN when appropriateJiri Pirko1-2/+2
Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.