| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce functions enabling/disabling Tx TS interrupts
for the E822 and ETH56G PHYs
Signed-off-by: Sergey Temerkhanov <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-3-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Multiple places in the driver code need to convert enum ice_ptp_tmr_cmd
values into register bits for both the main timer and the PHY port
timers. The main MAC register has one bit scheme for timer commands,
while the PHY commands use a different scheme.
The E810 and E830 devices use the same scheme for port commands as used
for the main timer. However, E822 and ETH56G hardware has a separate
scheme used by the PHY.
Introduce helper functions to convert the timer command enumeration into
the register values, reducing some code duplication, and making it
easier to later refactor the individual port write commands.
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-2-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Create new ice_ptp_hw struct and use it for all HW and PTP-related
fields from struct ice_hw.
Replace definitions with struct fields, which values are set accordingly
to a specific device.
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Arkadiusz Kubalewski <[email protected]>
Signed-off-by: Karol Kolacinski <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-next-2024-05-28-ptp-refactors-v1-1-c082739bb6f6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
On module load, the ice driver checks for the lack of a specific PF
capability to determine if it should reduce the number of devlink params
to register. One situation when this test returns true is when the
driver loads in safe mode. The same check is not present on the unload
path when devlink params are unregistered. This results in the driver
triggering a WARN_ON in the kernel devlink code.
The current check and code path uses a reduction in the number of elements
reported in the list of params. This is fragile and not good for future
maintaining.
Change the parameters to be held in two lists, one always registered and
one dependent on the check.
Add a symmetrical check in the unload path so that the correct parameters
are unregistered as well.
Fixes: 109eb2917284 ("ice: Add tx_scheduling_layers devlink param")
CC: Lukasz Czapnik <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Dave Ertman <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-8-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 24407a01e57c ("ice: Add 200G speed/phy type use") added support
for 200G PHY speeds, but did not include the mapping of 200G PHY types
to link speed. As a result the driver is returning UNKNOWN link speed
when setting 200G ethtool advertised link modes.
To fix this add 200G PHY types to link speed mapping to
ice_get_link_speed_based_on_phy_type().
Fixes: 24407a01e57c ("ice: Add 200G speed/phy type use")
Reviewed-by: Michal Swiatkowski <[email protected]>
Signed-off-by: Paul Greenwalt <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/20240528-net-2024-05-28-intel-net-fixes-v1-5-dc8593d2bbc6@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4a4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite smaller than usual. Notably it includes the fix for the unix
regression from the past weeks. The TCP window fix will require some
follow-up, already queued.
Current release - regressions:
- af_unix: fix garbage collection of embryos
Previous releases - regressions:
- af_unix: fix race between GC and receive path
- ipv6: sr: fix missing sk_buff release in seg6_input_core
- tcp: remove 64 KByte limit for initial tp->rcv_wnd value
- eth: r8169: fix rx hangup
- eth: lan966x: remove ptp traps in case the ptp is not enabled
- eth: ixgbe: fix link breakage vs cisco switches
- eth: ice: prevent ethtool from corrupting the channels
Previous releases - always broken:
- openvswitch: set the skbuff pkt_type for proper pmtud support
- tcp: Fix shift-out-of-bounds in dctcp_update_alpha()
Misc:
- a bunch of selftests stabilization patches"
* tag 'net-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (25 commits)
r8169: Fix possible ring buffer corruption on fragmented Tx packets.
idpf: Interpret .set_channels() input differently
ice: Interpret .set_channels() input differently
nfc: nci: Fix handling of zero-length payload packets in nci_rx_work()
net: relax socket state check at accept time.
tcp: remove 64 KByte limit for initial tp->rcv_wnd value
net: ti: icssg_prueth: Fix NULL pointer dereference in prueth_probe()
tls: fix missing memory barrier in tls_init
net: fec: avoid lock evasion when reading pps_enable
Revert "ixgbe: Manual AN-37 for troublesome link partners for X550 SFI"
testing: net-drv: use stats64 for testing
net: mana: Fix the extra HZ in mana_hwc_send_request
net: lan966x: Remove ptp traps in case the ptp is not enabled.
openvswitch: Set the skbuff pkt_type for proper pmtud support.
selftest: af_unix: Make SCM_RIGHTS into OOB data.
af_unix: Fix garbage collection of embryos carrying OOB with SCM_RIGHTS
tcp: Fix shift-out-of-bounds in dctcp_update_alpha().
selftests/net: use tc rule to filter the na packet
ipv6: sr: fix memleak in seg6_hmac_init_algo
af_unix: Update unix_sk(sk)->oob_skb under sk_receive_queue lock.
...
|
|
A bug occurs because a safety check guarding AF_XDP-related queues in
ethnl_set_channels(), does not trigger. This happens, because kernel and
ice driver interpret the ethtool command differently.
How the bug occurs:
1. ethtool -l <IFNAME> -> combined: 40
2. Attach AF_XDP to queue 30
3. ethtool -L <IFNAME> rx 15 tx 15
combined number is not specified, so command becomes {rx_count = 15,
tx_count = 15, combined_count = 40}.
4. ethnl_set_channels checks, if there are any AF_XDP of queues from the
new (combined_count + rx_count) to the old one, so from 55 to 40, check
does not trigger.
5. ice interprets `rx 15 tx 15` as 15 combined channels and deletes the
queue that AF_XDP is attached to.
Interpret the command in a way that is more consistent with ethtool
manual [0] (--show-channels and --set-channels).
Considering that in the ice driver only the difference between RX and TX
queues forms dedicated channels, change the correct way to set number of
channels to:
ethtool -L <IFNAME> combined 10 /* For symmetric queues */
ethtool -L <IFNAME> combined 8 tx 2 rx 0 /* For asymmetric queues */
[0] https://man7.org/linux/man-pages/man8/ethtool.8.html
Fixes: 87324e747fde ("ice: Implement ethtool ops for channels")
Reviewed-by: Michal Swiatkowski <[email protected]>
Signed-off-by: Larysa Zaremba <[email protected]>
Tested-by: Chandan Kumar Rout <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Acked-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.
This means that with:
__string(field, mystring)
Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.
There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:
git grep -l __assign_str | while read a ; do
sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
mv /tmp/test-file $a;
done
I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.
Note, the same updates will need to be done for:
__assign_str_len()
__assign_rel_str()
__assign_rel_str_len()
I tested this with both an allmodconfig and an allyesconfig (build only for both).
[1] https://lore.kernel.org/linux-trace-kernel/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Julia Lawall <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Acked-by: Christian König <[email protected]> for the amdgpu parts.
Acked-by: Thomas Hellström <[email protected]> #for
Acked-by: Rafael J. Wysocki <[email protected]> # for thermal
Acked-by: Takashi Iwai <[email protected]>
Acked-by: Darrick J. Wong <[email protected]> # xfs
Tested-by: Guenter Roeck <[email protected]>
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- optimize DMA sync calls when they are no-ops (Alexander Lobakin)
- fix swiotlb padding for untrusted devices (Michael Kelley)
- add documentation for swiotb (Michael Kelley)
* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
dma: fix DMA sync for drivers not calling dma_set_mask*()
xsk: use generic DMA sync shortcut instead of a custom one
page_pool: check for DMA sync shortcut earlier
page_pool: don't use driver-set flags field directly
page_pool: make sure frag API fields don't span between cachelines
iommu/dma: avoid expensive indirect calls for sync operations
dma: avoid redundant calls for sync operations
dma: compile-out DMA sync op calls when not used
iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
Documentation/core-api: add swiotlb documentation
|
|
Merge in late fixes to prepare for the 6.10 net-next PR.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Previously, the driver assumed that all signature segments would contain
one or more buffers to download. In the future, there will be signature
segments that will contain no buffers to download.
Correct download flow to allow for signature segments that have zero
download buffers and skip the download in this case.
Fixes: 3cbdb0343022 ("ice: Add support for E830 DDP package segment")
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Dan Nowlin <[email protected]>
Signed-off-by: Paul Greenwalt <[email protected]>
Reviewed-by: Paul Menzel <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ice_clear_dflt_vsi() is only removing default rule. Both default RX and
TX rule should be removed during release.
If it isn't switching to switchdev, second time results in error, because
TX filter is already there.
Fix it by removing the correct set of rules.
Fixes: 50d62022f455 ("ice: default Tx rule instead of to queue")
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Michal Swiatkowski <[email protected]>
Signed-off-by: Marcin Szycik <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Sujai Buvaneswaran <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
This driver currently doesn't support any control flags.
Use flow_rule_has_control_flags() to check for control flags,
such as can be set through `tc flower ... ip_flags frag`.
In case any control flags are masked, flow_rule_has_control_flags()
sets a NL extended error message, and we return -EOPNOTSUPP.
Only compile-tested.
Signed-off-by: Asbjørn Sloth Tønnesen <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Sujai Buvaneswaran <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
XSk infra's been using its own DMA sync shortcut to try avoiding
redundant function calls. Now that there is a generic one, remove
the custom implementation and rely on the generic helpers.
xsk_buff_dma_sync_for_cpu() doesn't need the second argument anymore,
remove it.
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-05-06 (ice)
This series contains updates to ice driver only.
Paul adds support for additional E830 devices and adjusts naming for
existing E830 devices.
Marcin commonizes a couple of TC setup calls to reduce duplicated code.
Mateusz adds ice_vsi_cfg_params into ice_vsi to consolidate info.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: refactor struct ice_vsi_cfg_params to be inside of struct ice_vsi
ice: Deduplicate tc action setup
ice: update E830 device ids and comments
ice: add additional E830 device ids
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c94510 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: Simon Horman <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Sabrina Dubroca <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Shannon Nelson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Refactor struct ice_vsi_cfg_params to be embedded into struct ice_vsi.
Prior to that the members of the struct were scattered around ice_vsi,
and were copy-pasted for purposes of reinit.
Now we have struct handy, and it is easier to have something sticky
in the flags field.
Suggested-by: Przemek Kitszel <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Vaishnavi Tipireddy <[email protected]>
Signed-off-by: Mateusz Polchlopek <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
ice_tc_setup_redirect_action() and ice_tc_setup_mirror_action() are almost
identical, except for setting filter action. Reduce them to one function
with an extra param, which handles both cases.
Reviewed-by: Mateusz Polchlopek <[email protected]>
Signed-off-by: Marcin Szycik <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Sujai Buvaneswaran <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Update existing E830 device ids and comments to align with new naming 'C'
for 100G and 'CC' for 200G.
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Paul Greenwalt <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add support for additional E830 device ids which are supported by the
driver:
- 0x12D5: Intel(R) Ethernet Controller E830-C for backplane
- 0x12D8: Intel(R) Ethernet Controller E830-C for QSFP
- 0x12DA: Intel(R) Ethernet Controller E830-C for SFP
- 0x12DC: Intel(R) Ethernet Controller E830-XXV for backplane
- 0x12DD: Intel(R) Ethernet Controller E830-XXV for QSFP
- 0x12DE: Intel(R) Ethernet Controller E830-XXV for SFP
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Paul Greenwalt <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/linux/filter.h
kernel/bpf/core.c
66e13b615a0c ("bpf: verifier: prevent userspace memory access")
d503a04f8bc0 ("bpf: Add support for certain atomics in bpf_arena to x86 JIT")
https://lore.kernel.org/all/[email protected]/
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
net: intel: start The Great Code Dedup + Page Pool for iavf
Alexander Lobakin says:
Here's a two-shot: introduce {,Intel} Ethernet common library (libeth and
libie) and switch iavf to Page Pool. Details are in the commit messages;
here's a summary:
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules. Before introducing new changes, which would need to be
copied over again, start decoupling the already existing duplicate
functionality into a new module, which will be shared between several
Intel Ethernet drivers. The first name that came to my mind was
"libie" -- "Intel Ethernet common library". Also this sounds like
"lovelie" (-> one word, no "lib I E" pls) and can be expanded as
"lib Internet Explorer" :P
The "generic", pure-software part is placed separately, so that it can be
easily reused in any driver by any vendor without linking to the Intel
pre-200G guts. In a few words, it's something any modern driver does the
same way, but nobody moved it level up (yet).
The series is only the beginning. From now on, adding every new feature
or doing any good driver refactoring will remove much more lines than add
for quite some time. There's a basic roadmap with some deduplications
planned already, not speaking of that touching every line now asks:
"can I share this?". The final destination is very ambitious: have only
one unified driver for at least i40e, ice, iavf, and idpf with a struct
ops for each generation. That's never gonna happen, right? But you still
can at least try.
PP conversion for iavf lands within the same series as these two are tied
closely. libie will support Page Pool model only, so that a driver can't
use much of the lib until it's converted. iavf is only the example, the
rest will eventually be converted soon on a per-driver basis. That is
when it gets really interesting. Stay tech.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
MAINTAINERS: add entry for libeth and libie
iavf: switch to Page Pool
iavf: pack iavf_ring more efficiently
libeth: add Rx buffer management
page_pool: add DMA-sync-for-CPU inline helper
page_pool: constify some read-only function arguments
slab: introduce kvmalloc_array_node() and kvcalloc_node()
iavf: drop page splitting and recycling
iavf: kill "legacy-rx" for good
net: intel: introduce {, Intel} Ethernet common library
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently, we allocate a count-sized kernel buffer and copy count bytes
from userspace to that buffer. Later, we use sscanf on this buffer but we
don't ensure that the string is terminated inside the buffer, this can lead
to OOB read when using sscanf. Fix this issue by using memdup_user_nul
instead of memdup_user.
Fixes: 96a9a9341cda ("ice: configure FW logging")
Fixes: 73671c3162c8 ("ice: enable FW logging")
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Bui Quang Minh <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_prueth.c
net/mac80211/chan.c
89884459a0b9 ("wifi: mac80211: fix idle calculation with multi-link")
87f5500285fb ("wifi: mac80211: simplify ieee80211_assign_link_chanctx()")
https://lore.kernel.org/all/[email protected]/
net/unix/garbage.c
1971d13ffa84 ("af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().")
4090fa373f0e ("af_unix: Replace garbage collection algorithm.")
drivers/net/ethernet/ti/icssg/icssg_prueth.c
drivers/net/ethernet/ti/icssg/icssg_common.c
4dcd0e83ea1d ("net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()")
e2dc7bfd677f ("net: ti: icssg-prueth: Move common functions into a separate file")
No adjacent changes.
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over
aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf().
The commit placed this lock acquisition just prior to the acquisition of
the VF configuration lock.
If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK
flag, this could deadlock with ice_vc_cfg_qs_msg() because it always
acquires the locks in the order of the VF configuration lock and then the
LAG mutex.
Lockdep reports this violation almost immediately on creating and then
removing 2 VF:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-rc6 #54 Tainted: G W O
------------------------------------------------------
kworker/60:3/6771 is trying to acquire lock:
ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice]
but task is already holding lock:
ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&pf->lag_mutex){+.+.}-{3:3}:
__lock_acquire+0x4f8/0xb40
lock_acquire+0xd4/0x2d0
__mutex_lock+0x9b/0xbf0
ice_vc_cfg_qs_msg+0x45/0x690 [ice]
ice_vc_process_vf_msg+0x4f5/0x870 [ice]
__ice_clean_ctrlq+0x2b5/0x600 [ice]
ice_service_task+0x2c9/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
kthread+0x104/0x140
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
-> #0 (&vf->cfg_lock){+.+.}-{3:3}:
check_prev_add+0xe2/0xc50
validate_chain+0x558/0x800
__lock_acquire+0x4f8/0xb40
lock_acquire+0xd4/0x2d0
__mutex_lock+0x9b/0xbf0
ice_reset_vf+0x22f/0x4d0 [ice]
ice_process_vflr_event+0x98/0xd0 [ice]
ice_service_task+0x1cc/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
kthread+0x104/0x140
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
*** DEADLOCK ***
4 locks held by kworker/60:3/6771:
#0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0
#1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0
#2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice]
#3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
stack backtrace:
CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54
Hardware name:
Workqueue: ice ice_service_task [ice]
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x80
check_noncircular+0x12d/0x150
check_prev_add+0xe2/0xc50
? save_trace+0x59/0x230
? add_chain_cache+0x109/0x450
validate_chain+0x558/0x800
__lock_acquire+0x4f8/0xb40
? lockdep_hardirqs_on+0x7d/0x100
lock_acquire+0xd4/0x2d0
? ice_reset_vf+0x22f/0x4d0 [ice]
? lock_is_held_type+0xc7/0x120
__mutex_lock+0x9b/0xbf0
? ice_reset_vf+0x22f/0x4d0 [ice]
? ice_reset_vf+0x22f/0x4d0 [ice]
? rcu_is_watching+0x11/0x50
? ice_reset_vf+0x22f/0x4d0 [ice]
ice_reset_vf+0x22f/0x4d0 [ice]
? process_one_work+0x176/0x4d0
ice_process_vflr_event+0x98/0xd0 [ice]
ice_service_task+0x1cc/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x104/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
To avoid deadlock, we must acquire the LAG mutex only after acquiring the
VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only
after we either acquire or check that the VF configuration lock is held.
Fixes: 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate")
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Dave Ertman <[email protected]>
Reviewed-by: Mateusz Polchlopek <[email protected]>
Tested-by: Przemek Kitszel <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Not a secret there's a ton of code duplication between two and more Intel
ethernet modules.
Before introducing new changes, which would need to be copied over again,
start decoupling the already existing duplicate functionality into a new
module, which will be shared between several Intel Ethernet drivers.
Add the lookup table which converts 8/10-bit hardware packet type into
a parsed bitfield structure for easy checking packet format parameters,
such as payload level, IP version, etc. This is currently used by i40e,
ice and iavf and it's all the same in all three drivers.
The only difference introduced in this implementation is that instead of
defining a 256 (or 1024 in case of ice) element array, add unlikely()
condition to limit the input to 154 (current maximum non-reserved packet
type). There's no reason to waste 600 (or even 3600) bytes only to not
hurt very unlikely exception packets.
The hash computation function now takes payload level directly as a
pkt_hash_type. There's a couple cases when non-IP ptypes are marked as
L3 payload and in the previous versions their hash level would be 2, not
3. But skb_set_hash() only sees difference between L4 and non-L4, thus
this won't change anything at all.
The module is behind the hidden Kconfig symbol, which the drivers will
select when needed. The exports are behind 'LIBIE' namespace to limit
the scope of the functions.
Not that non-HW-specific symbols will live in yet another module,
libeth. This is done to easily distinguish pretty generic code ready
for reusing by any other vendor and/or for moving the layer up from
the code useful in Intel's 1-100G drivers only.
Signed-off-by: Alexander Lobakin <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
It was observed that Tx performance was inconsistent across all queues
and/or VSIs and that it was directly connected to existing 9-layer
topology of the Tx scheduler.
Introduce new private devlink param - tx_scheduling_layers. This parameter
gives user flexibility to choose the 5-layer transmit scheduler topology
which helps to smooth out the transmit performance.
Allowed parameter values are 5 and 9.
Example usage:
Show:
devlink dev param show pci/0000:4b:00.0 name tx_scheduling_layers
pci/0000:4b:00.0:
name tx_scheduling_layers type driver-specific
values:
cmode permanent value 9
Set:
devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 5
cmode permanent
devlink dev param set pci/0000:4b:00.0 name tx_scheduling_layers value 9
cmode permanent
Signed-off-by: Lukasz Czapnik <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Co-developed-by: Mateusz Polchlopek <[email protected]>
Signed-off-by: Mateusz Polchlopek <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Introduce support for Tx scheduler topology change, based on user
selection, from default 9-layer to 5-layer.
Change requires NVM (version 3.20 or newer) and DDP package (OS Package
1.3.30 or newer - available for over a year in linux-firmware, since
commit aed71f296637 in linux-firmware ("ice: Update package to 1.3.30.0"))
https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=aed71f296637
Enable 5-layer topology switch in init path of the driver. To accomplish
that upload of the DDP package needs to be delayed, until change in Tx
topology is finished. To trigger the Tx change user selection should be
changed in NVM using devlink. Then the platform should be rebooted.
Signed-off-by: Michal Wilczynski <[email protected]>
Co-developed-by: Mateusz Polchlopek <[email protected]>
Signed-off-by: Mateusz Polchlopek <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Adjust the VSI/Aggregator layers based on the number of logical layers
supported by the FW. Currently the VSI and Aggregator layers are
fixed based on the 9 layer scheduler tree layout. Due to performance
reasons the number of layers of the scheduler tree is changing from
9 to 5. It requires a readjustment of these VSI/Aggregator layer values.
Signed-off-by: Raj Victor <[email protected]>
Co-developed-by: Michal Wilczynski <[email protected]>
Signed-off-by: Michal Wilczynski <[email protected]>
Signed-off-by: Mateusz Polchlopek <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
There is a performance issue when the number of VSIs are not multiple
of 8. This is caused due to the max children limitation per node(8) in
9 layer topology. The BW credits are shared evenly among the children
by default. Assume one node has 8 children and the other has 1.
The parent of these nodes share the BW credit equally among them.
Apparently this causes a problem for the first node which has 8 children.
The 9th VM get more BW credits than the first 8 VMs.
Example:
1) With 8 VM's:
for x in 0 1 2 3 4 5 6 7;
do taskset -c ${x} netperf -P0 -H 172.68.169.125 & sleep .1 ; done
tx_queue_0_packets: 23283027
tx_queue_1_packets: 23292289
tx_queue_2_packets: 23276136
tx_queue_3_packets: 23279828
tx_queue_4_packets: 23279828
tx_queue_5_packets: 23279333
tx_queue_6_packets: 23277745
tx_queue_7_packets: 23279950
tx_queue_8_packets: 0
2) With 9 VM's:
for x in 0 1 2 3 4 5 6 7 8;
do taskset -c ${x} netperf -P0 -H 172.68.169.125 & sleep .1 ; done
tx_queue_0_packets: 24163396
tx_queue_1_packets: 24164623
tx_queue_2_packets: 24163188
tx_queue_3_packets: 24163701
tx_queue_4_packets: 24163683
tx_queue_5_packets: 24164668
tx_queue_6_packets: 23327200
tx_queue_7_packets: 24163853
tx_queue_8_packets: 91101417
So on average queue 8 statistics show that 3.7 times more packets were
send there than to the other queues.
The FW starting with version 3.20, has increased the max number of
children per node by reducing the number of layers from 9 to 5. Reflect
this on driver side.
Signed-off-by: Raj Victor <[email protected]>
Co-developed-by: Michal Wilczynski <[email protected]>
Signed-off-by: Michal Wilczynski <[email protected]>
Co-developed-by: Mateusz Polchlopek <[email protected]>
Signed-off-by: Mateusz Polchlopek <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Extend devlink_param *set function pointer to take extack as a param.
Sometimes it is needed to pass information to the end user from set
function. It is more proper to use for that netlink instead of passing
message to dmesg.
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Mateusz Polchlopek <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-17 (ice)
This series contains updates to ice driver only.
Marcin adds Tx malicious driver detection (MDD) events to be included as
part of mdd-auto-reset-vf.
Dariusz removes unnecessary implementation of ndo_get_phys_port_name.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: Remove ndo_get_phys_port_name
ice: Add automatic VF reset on Tx MDD events
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
include/trace/events/rpcgss.h
386f4a737964 ("trace: events: cleanup deprecated strncpy uses")
a4833e3abae1 ("SUNRPC: Fix rpcgss_context trace event acceptor field")
Adjacent changes:
drivers/net/ethernet/intel/ice/ice_tc_lib.c
2cca35f5dd78 ("ice: Fix checking for unsupported keys on non-tunnel device")
784feaa65dfd ("ice: Add support for PFCP hardware offload in switchdev")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ndo_get_phys_port_name is never actually used, as in switchdev
devlink is always being created.
Reviewed-by: Michal Swiatkowski <[email protected]>
Signed-off-by: Dariusz Aftanski <[email protected]>
Tested-by: Sujai Buvaneswaran <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
In cases when VF sends malformed packets that are classified as malicious,
it can cause Tx queue to freeze as a result of Malicious Driver Detection
event. Such malformed packets can appear as a result of a faulty userspace
app running on VF. This frozen queue can be stuck for several minutes being
unusable.
User might prefer to immediately bring the VF back to operational state
after such event, which can be done by automatically resetting the VF which
caused MDD. This is already implemented for Rx events (mdd-auto-reset-vf
flag private flag needs to be set).
Extend the VF auto reset to also cover Tx MDD events. When any MDD event
occurs on VF (Tx or Rx) and the mdd-auto-reset-vf private flag is set,
perform a graceful VF reset to quickly bring it back to operational state.
Reviewed-by: Wojciech Drewek <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Co-developed-by: Liang-Min Wang <[email protected]>
Signed-off-by: Liang-Min Wang <[email protected]>
Signed-off-by: Marcin Szycik <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing.
Without these checks, it would be possible to add filters with tunnel
options on non-tunnel devices. enc_* options are only valid for tunnel
devices.
Example:
devlink dev eswitch set $PF1_PCI mode switchdev
echo 1 > /sys/class/net/$PF1/device/sriov_numvfs
tc qdisc add dev $VF1_PR ingress
ethtool -K $PF1 hw-tc-offload on
tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop
Fixes: 9e300987d4a8 ("ice: VXLAN and Geneve TC support")
Reviewed-by: Michal Swiatkowski <[email protected]>
Signed-off-by: Marcin Szycik <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Tested-by: Sujai Buvaneswaran <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The check for flags is done to not pass empty lookups to adding switch
rule functions. Since metadata is always added to lookups there is no
need to check against the flag.
It is also fixing the problem with such rule:
$ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \
enc_dst_port 2123 action drop
Switch block in case of GTP can't parse the destination port, because it
should always be set to GTP specific value. The same with ethertype. The
result is that there is no other matching criteria than GTP tunnel. In
this case flags is 0, rule can't be added only because of defensive
check against flags.
Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev")
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Michal Swiatkowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Sujai Buvaneswaran <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
In case of traffic going from the VF (so ingress for port representor)
source VSI should be consider during packet classification. It is
needed for hardware to not match packets from different ports with
filters added on other port.
It is only for "from VF" traffic, because other traffic direction
doesn't have source VSI.
Set correct ::src_vsi in rule_info to pass it to the hardware filter.
For example this rule should drop only ipv4 packets from eth10, not from
the others VF PRs. It is needed to check source VSI in this case.
$tc filter add dev eth10 ingress protocol ip flower skip_sw action drop
Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF")
Reviewed-by: Jedrzej Jagielski <[email protected]>
Reviewed-by: Sridhar Samudrala <[email protected]>
Signed-off-by: Michal Swiatkowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Sujai Buvaneswaran <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
The ice physical function driver needs to configure the association of
queues and interrupts on behalf of its virtual functions. This is done over
virtchnl by the VF sending messages during its initialization phase. These
messages contain a vector_id which the VF wants to associate with a given
queue. This ID is relative to the VF space, where 0 indicates the control
IRQ for non-queue interrupts.
When programming the mapping, the PF driver currently passes this vector_id
directly to the low level functions for programming. This works for SR-IOV,
because the hardware uses the VF-based indexing for interrupts.
This won't work for Scalable IOV, which uses PF-based indexing for
programming its VSIs. To handle this, the driver needs to be able to look
up the proper index to use for programming. For typical IRQs, this would be
the q_vector->reg_idx field.
The q_vector->reg_idx can't be set to a VF relative value, because it is
used when the PF needs to control the interrupt, such as when triggering a
software interrupt on stopping the Tx queue. Thus, introduce a new
q_vector->vf_reg_idx which can store the VF relative index for registers
which expect this.
Use this in ice_cfg_interrupt to look up the VF index from the q_vector.
This allows removing the vector ID parameter of ice_cfg_interrupt. Also
notice that this function returns an int, but then is cast to the virtchnl
error enumeration, virtchnl_status_code. Update the return type to indicate
it does not return an integer error code. We can't use normal error codes
here because the return values are passed across the virtchnl interface.
This will allow the future Scalable IOV VFs to correctly look up the index
needed for programming the VF queues without breaking SR-IOV.
Signed-off-by: Jacob Keller <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Commit fe1c5ca2fe76 ("ice: implement num_msix field per VF") updated the
driver to allow for per-VF MSI-X configuration. The initial defaults were
set in ice_create_vf_entries(). This logic is better placed in
ice_initialize_vf_entry(). Indeed, that function already sets
vf->num_vf_qs, as well as initializes the allow list via calling
ice_vc_set_default_allowlist().
Move this logic into ice_initialize_vf_entry(). This makes the code clear,
and ensures that these VF fields will be initialized properly for both
SR-IOV VFs and the upcoming Scalable IOV VFs.
Signed-off-by: Jacob Keller <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Add support for 'flow-type ether' Flow Director rules via ethtool.
Create packet segment info for filter configuration based on ethtool
command parameters. Reuse infrastructure already created for
ipv4 and ipv6 flows to convert packet segment into
extraction sequence, which is later used to program the filter
inside Flow Director block of the Rx pipeline.
Rules not containing masks are processed by the Flow Director,
and support the following set of input parameters in all combinations:
src, dst, proto, vlan-etype, vlan, action.
It is possible to specify address mask in ethtool parameters but only
00:00:00:00:00 and FF:FF:FF:FF:FF are valid.
The same applies to proto, vlan-etype and vlan masks:
only 0x0000 and 0xffff masks are valid.
Testing:
(DUT) iperf3 -s
(DUT) ethtool -U ens785f0np0 flow-type ether dst <ens785f0np0 mac> \
action 10
(DUT) watch 'ethtool -S ens785f0np0 | grep rx_queue'
(LP) iperf3 -c ${DUT_IP}
Counters increase only for:
'rx_queue_10_packets'
'rx_queue_10_bytes'
Signed-off-by: Jakub Buchocki <[email protected]>
Co-developed-by: Mateusz Pacuszka <[email protected]>
Signed-off-by: Mateusz Pacuszka <[email protected]>
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Lukasz Plachno <[email protected]>
Reviewed-by: Jacob Keller <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Passing v6 argument is unnecessary as flow_type is still
analyzed inside the function.
Reviewed-by: Przemek Kitszel <[email protected]>
Signed-off-by: Lukasz Plachno <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
net/ipv4/ip_gre.c
17af420545a7 ("erspan: make sure erspan_base_hdr is present in skb->head")
5832c4a77d69 ("ip_tunnel: convert __be16 tunnel flags to bitmaps")
https://lore.kernel.org/all/[email protected]/
Adjacent changes:
net/ipv6/ip6_fib.c
d21d40605bca ("ipv6: Fix infinite recursion in fib6_dump_done().")
5fc68320c1fb ("ipv6: remove RTNL protection from inet6_dump_fib()")
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ice_port_vlan_on/off() was introduced in commit 2946204b3fa8 ("ice:
implement bridge port vlan"). But ice_port_vlan_on() incorrectly assigns
ena_rx_filtering to inner_vlan_ops in DVM mode.
This causes an error when rx_filtering cannot be enabled in legacy mode.
Reproducer:
echo 1 > /sys/class/net/$PF/device/sriov_numvfs
ip link set $PF vf 0 spoofchk off trust on vlan 3
dmesg:
ice 0000:41:00.0: failed to enable Rx VLAN filtering for VF 0 VSI 9 during VF rebuild, error -95
Fixes: 2946204b3fa8 ("ice: implement bridge port vlan")
Signed-off-by: Petr Oros <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Tested-by: Rafal Romanowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Automatically cleaned up pointers need to be initialized before exiting
their scope. In this case, they need to be initialized to NULL before
any return statement.
Fixes: 90f821d72e11 ("ice: avoid unnecessary devm_ usage")
Signed-off-by: Dan Carpenter <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-01 (ice)
This series contains updates to ice driver only.
Michal Schmidt changes flow for gettimex64 to use host-side spinlock
rather than hardware semaphore for lighter-weight locking.
Steven adds ability for switch recipes to be re-used when firmware
supports it.
Thorsten Blum removes unwanted newlines in netlink messaging.
Michal Swiatkowski and Piotr re-organize devlink related code; renaming,
moving, and consolidating it to a single location. Michal also
simplifies the devlink init and cleanup path to occur under a single
lock call.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: hold devlink lock for whole init/cleanup
ice: move devlink port code to a separate file
ice: move ice_devlink.[ch] to devlink folder
ice: Remove newlines in NL_SET_ERR_MSG_MOD
ice: Add switch recipe reusing feature
ice: fold ice_ptp_read_time into ice_ptp_gettimex64
ice: avoid the PTP hardware semaphore in gettimex64 path
ice: add ice_adapter for shared data across PFs on the same NIC
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-29 (net: intel)
This series contains updates to most Intel drivers.
Jesse moves declaration of pci_driver struct to remove need for forward
declarations in igb and converts Intel drivers to user newer power
management ops.
Sasha reworks power management flow on igc to avoid using rtnl_lock()
during those flows.
Maciej reorganizes i40e_nvm file to avoid forward declarations.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: avoid forward declarations in i40e_nvm.c
igc: Refactor runtime power management flow
net: intel: implement modern PM ops declarations
igb: simplify pci ops declaration
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Simplify devlink lock code in driver by taking it for whole init/cleanup
path. Instead of calling devlink functions that taking lock call the
lockless versions.
Suggested-by: Jiri Pirko <[email protected]>
Reviewed-by: Jesse Brandeburg <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Michal Swiatkowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Keep devlink related code in a separate file. More devlink port code and
handlers will be added here for other port operations.
Remove no longer needed include of our devlink.h in ice_lib.c.
Reviewed-by: Przemek Kitszel <[email protected]>
Reviewed-by: Wojciech Drewek <[email protected]>
Signed-off-by: Piotr Raczynski <[email protected]>
Signed-off-by: Michal Swiatkowski <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|