aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ice/ice_lib.c
AgeCommit message (Collapse)AuthorFilesLines
2023-10-03ice: make use of DEFINE_FLEX() for struct ice_aqc_add_tx_qgrpPrzemek Kitszel1-18/+5
Use DEFINE_FLEX() macro for 1-elem flex array use case of struct ice_aqc_add_tx_qgrp. Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230912115937.1645707-6-przemyslaw.kitszel@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-18ice: introduce ice_pf_src_tmr_ownedJacob Keller1-1/+1
Add ice_pf_src_tmr_owned() macro to check the function capability bit indicating if the current function owns the PTP hardware clock. This is slightly shorter than the more verbose access via hw.func_caps.ts_func_info.src_tmr_owned. Use this where possible rather than open coding its equivalent. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-18ice: remove ICE_F_PTP_EXTTS feature flagJacob Keller1-1/+0
The ICE_F_PTP_EXTTS feature flag is ostensibly intended to support checking whether the device supports external timestamp pins. It is only checked in E810-specific code flows, and is enabled for all E810-based devices. E822 and E823 flows unconditionally enable external timestamp support. This makes the feature flag meaningless, as it is always enabled. Just unconditionally enable support for external timestamp pins and remove this unnecessary flag. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-09-17ice: add admin commands to access cgu configurationArkadiusz Kubalewski1-4/+13
Add firmware admin command to access clock generation unit configuration, it is required to enable Extended PTP and SyncE features in the driver. Add definitions of possible hardware variations of input and output pins related to clock generation unit and functions to access the data. Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-17ice: refactor ice_vsi_is_vlan_pruning_enaJan Sokolowski1-4/+1
As this method became static, and is already called with check for vsi being non-null, an unnecessary check along with superfluous parentheses is removed. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-17ice: refactor ice_lib to make functions staticJan Sokolowski1-35/+35
As following methods are not used outside of ice_lib, they can be made static: ice_vsi_is_vlan_pruning_ena ice_vsi_cfg_frame_size Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-17ice: remove unused methodsJan Sokolowski1-15/+0
Following methods were found to no longer be in use: ice_is_pca9575_present ice_mac_fltr_exist ice_napi_del Remove them. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-08-07ice: clean up __ice_aq_get_set_rss_lut()Przemek Kitszel1-10/+10
Refactor __ice_aq_get_set_rss_lut() to improve reader experience and limit misuse scenarios (undesired LUT size for given LUT type). Allow only 3 RSS LUT type+size variants: PF LUT sized 2048, GLOBAL LUT sized 512, and VSI LUT sized 64, which were used on default flows prior to this commit. Prior to the change, code was mixing the meaning of @params->lut_size and @params->lut_type, flag assigning logic was cryptic, while long defines made everything harder to follow. Fix that by extracting some code out to separate helpers. Drop some of "shift by 0" statements that originated from Intel's internal HW documentation. Drop some redundant VSI masks (since ice_is_vsi_valid() gives "valid" for up to 0x300 VSIs). After sweeping all the defines out of struct ice_aqc_get_set_rss_lut, it fits into 7 lines. Finally apply some cleanup to the callsite (use of the new enums, tmp var for lengthy bit extraction). Note that flags for 128 and 64 sized VSI LUT are the same, and 64 is used everywhere in the code (updated to new enum here), it just happened that there was 128 in flag name. __ice_aq_get_set_rss_key() uses the same VSI valid bit, make constant common for it and __ice_aq_get_set_rss_lut(). Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-27ice: Add driver support for firmware changes for LAGDave Ertman1-1/+1
Add the defines, fields, and detection code for FW support of LAG for SRIOV. Also exposes some previously static functions to allow access in the lag code. Clean up code that is unused or not needed for LAG support. Also add an ordered workqueue for processing LAG events. Reviewed-by: Daniel Machon <daniel.machon@microchip.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-24ice: Unset src prune on uplink VSIWojciech Drewek1-0/+25
In switchdev mode uplink VSI is supposed to receive all packets that were not matched by existing filters. If ICE_AQ_VSI_SW_FLAG_LOCAL_LB bit is unset and we have a filter associated with uplink VSI which matches on dst mac equal to MAC1, then packets with src mac equal to MAC1 will be pruned from reaching uplink VSI. Fix this by updating uplink VSI with ICE_AQ_VSI_SW_FLAG_LOCAL_LB bit set when configuring switchdev mode. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-14ice: Unregister netdev and devlink_port only oncePetr Oros1-27/+0
Since commit 6624e780a577fc ("ice: split ice_vsi_setup into smaller functions") ice_vsi_release does things twice. There is unregister netdev which is unregistered in ice_deinit_eth also. It also unregisters the devlink_port twice which is also unregistered in ice_deinit_eth(). This double deregistration is hidden because devl_port_unregister ignores the return value of xa_erase. [ 68.642167] Call Trace: [ 68.650385] ice_devlink_destroy_pf_port+0xe/0x20 [ice] [ 68.655656] ice_vsi_release+0x445/0x690 [ice] [ 68.660147] ice_deinit+0x99/0x280 [ice] [ 68.664117] ice_remove+0x1b6/0x5c0 [ice] [ 171.103841] Call Trace: [ 171.109607] ice_devlink_destroy_pf_port+0xf/0x20 [ice] [ 171.114841] ice_remove+0x158/0x270 [ice] [ 171.118854] pci_device_remove+0x3b/0xc0 [ 171.122779] device_release_driver_internal+0xc7/0x170 [ 171.127912] driver_detach+0x54/0x8c [ 171.131491] bus_remove_driver+0x77/0xd1 [ 171.135406] pci_unregister_driver+0x2d/0xb0 [ 171.139670] ice_module_exit+0xc/0x55f [ice] Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Petr Oros <poros@redhat.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-06-22ice: remove null checks before devm_kfree() callsPrzemek Kitszel1-28/+14
We all know they are redundant. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Michal Wilczynski <michal.wilczynski@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-18Merge branch '100GbE' of ↵Jakub Kicinski1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-05-17 (ice, MAINTAINERS) This series contains updates to ice driver and MAINTAINERS file. Paul refactors PHY to link mode reporting and updates some PHY types to report more accurate link modes for ice. Dave removes mutual exclusion policy between LAG and SR-IOV in ice driver. Jesse updates link for Intel Wired LAN in the MAINTAINERS file. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: MAINTAINERS: update Intel Ethernet links ice: Remove LAG+SRIOV mutual exclusion ice: update PHY type to ethtool link mode mapping ice: refactor PHY type to ethtool link mode ice: update ICE_PHY_TYPE_HIGH_MAX_INDEX ==================== Link: https://lore.kernel.org/r/20230517165530.3179965-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+5
Conflicts: drivers/net/ethernet/freescale/fec_main.c 6ead9c98cafc ("net: fec: remove the xdp_return_frame when lack of tx BDs") 144470c88c5d ("net: fec: using the standard return codes when xdp xmit errors") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-05-17ice: Remove LAG+SRIOV mutual exclusionDave Ertman1-2/+0
There was a change previously to stop SR-IOV and LAG from existing on the same interface. This was to prevent the violation of LACP (Link Aggregation Control Protocol). The method to achieve this was to add a no-op Rx handler onto the netdev when SR-IOV VFs were present, thus blocking bonding, bridging, etc from claiming the interface by adding its own Rx handler. Also, when an interface was added into a aggregate, then the SR-IOV capability was set to false. There are some users that have in house solutions using both SR-IOV and bridging/bonding that this method interferes with (e.g. creating duplicate VFs on the bonded interfaces and failing between them when the interface fails over). It makes more sense to provide the most functionality possible, the restriction on co-existence of these features will be removed. No additional functionality is currently being provided beyond what existed before the co-existence restriction was put into place. It is up to the end user to not implement a solution that would interfere with existing network protocols. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: Fix stats after PF resetAhmed Zaki1-0/+5
After a core PF reset, the VFs were showing wrong Rx/Tx stats. This is a regression in commit 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") caused by missing to set "stat_offsets_loaded = false" in the ice_vsi_rebuild() path. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: track interrupt vectors with xarrayPiotr Raczynski1-45/+0
Replace custom interrupt tracker with generic xarray data structure. Remove all code responsible for searching for a new entry with xa_alloc, which always tries to allocate at the lowes possible index. As a result driver is always using a contiguous region of the MSIX vector table. New tracker keeps ice_irq_entry entries in xarray as opaque for the rest of the driver hiding the entry details from the caller. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: add individual interrupt allocationPiotr Raczynski1-210/+18
Currently interrupt allocations, depending on a feature are distributed in batches. Also, after allocation there is a series of operations that distributes per irq settings through that batch of interrupts. Although driver does not yet support dynamic interrupt allocation, keep allocated interrupts in a pool and add allocation abstraction logic to make code more flexible. Keep per interrupt information in the ice_q_vector structure, which yields ice_vsi::base_vector redundant. Also, as a result there are a few functions that can be removed. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: refactor VF control VSI interrupt handlingPiotr Raczynski1-66/+19
All VF control VSIs share the same interrupt vector. Currently, a helper function dedicated for that directly sets ice_vsi::base_vector. Use helper that returns pointer to first found VF control VSI instead. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-05-16ice: use pci_irq_vector helper functionPiotr Raczynski1-2/+2
Currently, driver gets interrupt number directly from ice_pf::msix_entries array. Use helper function dedicated to do just that. While at it use a variable to store interrupt number in ice_free_irq_msix_misc instead of calling the helper function twice. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-21ice: remove filters only if VSI is deletedMichal Swiatkowski1-1/+1
Filters shouldn't be removed in VSI rebuild path. Removing them on PF VSI results in no rule for PF MAC after changing for example queues amount. Remove all filters only in the VSI remove flow. As unload should also cause the filter to be removed introduce, a new function ice_stop_eth(). It will unroll ice_start_eth(), so remove filters and close VSI. Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07ice: don't ignore return codes in VSI related codeMichal Swiatkowski1-7/+10
There were few smatch warnings reported by Dan: - ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner - return values in ice_vsi_cfg_def were ignored - in ice_vsi_rebuild return value was ignored in case rebuild failed, it was a never reached code, however, rewrite it for clarity. - ice_vsi_cfg_tc can return 0 instead of ret Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-20ice: properly alloc ICE_VSI_LBMichal Swiatkowski1-0/+1
Devlink reload patchset introduced regression. ICE_VSI_LB wasn't taken into account when doing default allocation. Fix it by adding a case for ICE_VSI_LB in ice_vsi_alloc_def(). Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-02-14ice: Change ice_vsi_realloc_stat_arrays() to voidTony Nguyen1-7/+4
smatch reports: smatch warnings: drivers/net/ethernet/intel/ice/ice_lib.c:3612 ice_vsi_rebuild() warn: missing error code 'ret' If an error is encountered for ice_vsi_realloc_stat_arrays(), ret is not assigned an error value so the goto error path would return success. The function, however, only returns 0 so an error will never be reported; due to this, change the function to return void. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
2023-02-10Daniel Borkmann says:Jakub Kicinski1-6/+2
==================== pull-request: bpf-next 2023-02-11 We've added 96 non-merge commits during the last 14 day(s) which contain a total of 152 files changed, 4884 insertions(+), 962 deletions(-). There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c between commit 5b246e533d01 ("ice: split probe into smaller functions") from the net-next tree and commit 66c0e13ad236 ("drivers: net: turn on XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev() is otherwise there a 2nd time, and add XDP features to the existing ice_cfg_netdev() one: [...] ice_set_netdev_features(netdev); netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT | NETDEV_XDP_ACT_XSK_ZEROCOPY; ice_set_ops(netdev); [...] Stephen's merge conflict mail: https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/ The main changes are: 1) Add support for BPF trampoline on s390x which finally allows to remove many test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich. 2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski. 3) Add capability to export the XDP features supported by the NIC. Along with that, add a XDP compliance test tool, from Lorenzo Bianconi & Marek Majtyka. 4) Add __bpf_kfunc tag for marking kernel functions as kfuncs, from David Vernet. 5) Add a deep dive documentation about the verifier's register liveness tracking algorithm, from Eduard Zingerman. 6) Fix and follow-up cleanups for resolve_btfids to be compiled as a host program to avoid cross compile issues, from Jiri Olsa & Ian Rogers. 7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted when testing on different NICs, from Jesper Dangaard Brouer. 8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang. 9) Extend libbpf to add an option for when the perf buffer should wake up, from Jon Doron. 10) Follow-up fix on xdp_metadata selftest to just consume on TX completion, from Stanislav Fomichev. 11) Extend the kfuncs.rst document with description on kfunc lifecycle & stability expectations, from David Vernet. 12) Fix bpftool prog profile to skip attaching to offline CPUs, from Tonghao Zhang. ==================== Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-02-06ice: move vsi_type assignment from ice_vsi_alloc to ice_vsi_cfgJacob Keller1-25/+26
The ice_vsi_alloc and ice_vsi_cfg functions are used together to allocate and configure a new VSI, called as part of the ice_vsi_setup function. In the future with the addition of the subfunction code the ice driver will want to be able to allocate a VSI while delaying the configuration to a later point of the port activation. Currently this requires that the port code know what type of VSI should be allocated. This is required because ice_vsi_alloc assigns the VSI type. Refactor the ice_vsi_alloc and ice_vsi_cfg functions so that VSI type assignment isn't done until the configuration stage. This will allow the devlink port addition logic to reserve a VSI as early as possible before the type of the port is known. In this way, the port add can fail in the event that all hardware VSI resources are exhausted. Since the ice_vsi_cfg function already takes the ice_vsi_cfg_params structure, this is relatively straight forward. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-06ice: refactor VSI setup to use parameter structureJacob Keller1-45/+47
The ice_vsi_setup function, ice_vsi_alloc, and ice_vsi_cfg functions have grown a large number of parameters. These parameters are used to initialize a new VSI, as well as re-configure an existing VSI Any time we want to add a new parameter to this function chain, even if it will usually be unset, we have to change many call sites due to changing the function signature. A future change is going to refactor ice_vsi_alloc and ice_vsi_cfg to move the VSI configuration and initialization all into ice_vsi_cfg. Before this, refactor the VSI setup flow to use a new ice_vsi_cfg_params structure. This will contain the configuration (mainly pointers) used to initialize a VSI. Pass this from ice_vsi_setup into the related functions such as ice_vsi_alloc, ice_vsi_cfg, and ice_vsi_cfg_def. Introduce a helper, ice_vsi_to_params to convert an existing VSI to the parameters used to initialize it. This will aid in the flows where we rebuild an existing VSI. Since we also pass the ICE_VSI_FLAG_INIT to more functions which do not need (or cannot yet have) the VSI parameters, lets make this clear by renaming the function parameter to vsi_flags and using a u32 instead of a signed integer. The name vsi_flags also makes it clear that we may extend the flags in the future. This change will make it easier to refactor the setup flow in the future, and will reduce the complexity required to add a new parameter for configuration in the future. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-06ice: drop unnecessary VF parameter from several VSI functionsJacob Keller1-13/+8
The vsi->vf pointer gets assigned early on during ice_vsi_alloc. Several functions currently take a VF pointer, but they can just use the existing vsi->vf pointer as needed. Modify these functions to drop the unnecessary VF parameter. Note that ice_vsi_cfg is not changed as a following change will refactor so that the VF pointer is assigned during ice_vsi_cfg rather than ice_vsi_alloc. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Marek Szlosek <marek.szlosek@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-06ice: fix function comment referring to ice_vsi_allocJacob Keller1-1/+1
Since commit 1d2e32275de7 ("ice: split ice_vsi_setup into smaller functions") ice_vsi_alloc has not been responsible for all of the behavior implied by the comment for ice_vsi_setup_vector_base. Fix the comment to refer to the new function ice_vsi_alloc_def(). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: update VSI instead of init in some caseMichal Swiatkowski1-6/+10
ice_vsi_cfg() is called from different contexts: 1) VSI exsist in HW, but it is reconfigured, because of changing queues for example -> update instead of init should be used 2) VSI doesn't exsist, because rest has happened -> init command should be sent To support both cases pass boolean value which will store information what type of command has to be sent to HW. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: move VSI delete outside deconfigMichal Swiatkowski1-15/+13
In deconfig VSI shouldn't be deleted from hw. Rewrite VSI delete function to reflect that sometimes it is only needed to remove VSI from hw without freeing the memory: ice_vsi_delete() -> delete from HW and free memory ice_vsi_delete_from_hw() -> delete only from HW Value returned from ice_vsi_free() is never used. Change return type to void. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: stop hard coding the ICE_VSI_CTRL locationJacob Keller1-19/+15
When allocating the ICE_VSI_CTRL, the allocated struct ice_vsi pointer is stored into the PF's pf->vsi array at a fixed location. This was historically done on the basis that it could provide an O(1) lookup for the special control VSI. Since we store the ctrl_vsi_idx, we already have O(1) lookup regardless of where in the array we store this VSI. Simplify the logic in ice_vsi_alloc by using the same method of storing the control VSI as other types of VSIs. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: split ice_vsi_setup into smaller functionsMichal Swiatkowski1-475/+401
Main goal is to reuse the same functions in VSI config and rebuild paths. To do this split ice_vsi_setup into smaller pieces and reuse it during rebuild. ice_vsi_alloc() should only alloc memory, not set the default values for VSI. Move setting defaults to separate function. This will allow config of already allocated VSI, for example in reload path. The path is mostly moving code around without introducing new functionality. Functions ice_vsi_cfg() and ice_vsi_decfg() were added, but they are using code that already exist. Use flag to pass information about VSI initialization during rebuild instead of using boolean value. Co-developed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-03ice: cleanup in VSI config/deconfig codeMichal Swiatkowski1-34/+17
Do few small cleanups: 1) Rename the function to reflect that it doesn't configure all things related to VSI. ice_vsi_cfg_lan() better fits to what function is doing. ice_vsi_cfg() can be use to name function that will configure whole VSI. 2) Remove unused ethtype field from VSI. There is no need to set ethtype here, because it is never used. 3) Remove unnecessary check for ICE_VSI_CHNL. There is check for ICE_VSI_CHNL in ice_vsi_get_qs, so there is no need to check it before calling the function. 4) Simplify ice_vsi_alloc() call. There is no need to check the type of VSI before calling ice_vsi_alloc(). For ICE_VSI_CHNL vf is always NULL (ice_vsi_setup() is called with vf=NULL). For ICE_VSI_VF or ICE_VSI_CTRL ch is always NULL and for other VSI types ch and vf are always NULL. 5) Remove unnecessary call to ice_vsi_dis_irq(). ice_vsi_dis_irq() will be called in ice_vsi_close() flow (ice_vsi_close() -> ice_vsi_down() -> ice_vsi_dis_irq()). Remove unnecessary call. 6) Don't remove specific filters in release. All hw filters are removed in ice_fltr_remove_alli(), which is always called in VSI release flow. There is no need to remove only ethertype filters before calling ice_fltr_remove_all(). 7) Rename ice_vsi_clear() to ice_vsi_free(). As ice_vsi_clear() only free memory allocated in ice_vsi_alloc() rename it to ice_vsi_free() which better shows what function is doing. 8) Free coalesce param in rebuild. There is potential memory leak if configuration of VSI lan fails. Free coalesce to avoid it. Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-02-01ice: Prepare legacy-rx for upcoming XDP multi-buffer supportMaciej Fijalkowski1-6/+2
Rx path is going to be modified in a way that fragmented frame will be gathered within xdp_buff in the first place. This approach implies that underlying buffer has to provide tailroom for skb_shared_info. This is currently the case when ring uses build_skb but not when legacy-rx knob is turned on. This case configures 2k Rx buffers and has no way to provide either headroom or tailroom - FWIW it currently has XDP_PACKET_HEADROOM which is broken and in here it is removed. 2k Rx buffers were used so driver in this setting was able to support 9k MTU as it can chain up to 5 Rx buffers. With offset configuring HW writing 2k of a data was passing the half of the page which broke the assumption of our internal page recycling tricks. Now if above got fixed and legacy-rx path would be left as is, when referring to skb_shared_info via xdp_get_shared_info_from_buff(), packet's content would be corrupted again. Hence size of Rx buffer needs to be lowered and therefore supported MTU. This operation will allow us to keep the unified data path and with 8k MTU users (if any of legacy-rx) would still be good to go. However, tendency is to drop the support for this code path at some point. Add ICE_RXBUF_1664 as vsi::rx_buf_len and ICE_MAX_FRAME_LEGACY_RX (8320) as vsi::max_frame for legacy-rx. For bigger page sizes configure 3k Rx buffers, not 2k. Since headroom support is removed, disable data_meta support on legacy-rx. When preparing XDP buff, rely on ice_rx_ring::rx_offset setting when deciding whether to support data_meta or not. Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/bpf/20230131204506.219292-2-maciej.fijalkowski@intel.com
2023-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+0
Conflicts: drivers/net/ethernet/intel/ice/ice_main.c 418e53401e47 ("ice: move devlink port creation/deletion") 643ef23bd9dd ("ice: Introduce local var for readability") https://lore.kernel.org/all/20230127124025.0dacef40@canb.auug.org.au/ https://lore.kernel.org/all/20230124005714.3996270-1-anthony.l.nguyen@intel.com/ drivers/net/ethernet/engleder/tsnep_main.c 3d53aaef4332 ("tsnep: Fix TX queue stop/wake for multiple queues") 25faa6a4c5ca ("tsnep: Replace TX spin_lock with __netif_tx_lock") https://lore.kernel.org/all/20230127123604.36bb3e99@canb.auug.org.au/ net/netfilter/nf_conntrack_proto_sctp.c 13bd9b31a969 ("Revert "netfilter: conntrack: add sctp DATA_SENT state"") a44b7651489f ("netfilter: conntrack: unify established states for SCTP paths") f71cb8f45d09 ("netfilter: conntrack: sctp: use nf log infrastructure for invalid packets") https://lore.kernel.org/all/20230127125052.674281f9@canb.auug.org.au/ https://lore.kernel.org/all/d36076f3-6add-a442-6d4b-ead9f7ffff86@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-24ice: move devlink port creation/deletionPaul M Stillwell Jr1-3/+0
Commit a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows") moved the code to create and destroy the devlink PF port. This was fine, but created a corner case issue in the case of ice_register_netdev() failing. In that case, the driver would end up calling ice_devlink_destroy_pf_port() twice. Additionally, it makes no sense to tie creation of the devlink PF port to the creation of the netdev so separate out the code to create/destroy the devlink PF port from the netdev code. This makes it a cleaner interface. Fixes: a286ba738714 ("ice: reorder PF/representor devlink port register/unregister flows") Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230124005714.3996270-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-19ice: Remove excess spaceTony Nguyen1-1/+1
smatch reports inconsistent indenting due to an extra space; remove it to resolve the issue. smatch warnings: drivers/net/ethernet/intel/ice/ice_lib.c:1673 ice_vsi_alloc_ring_stats() warn: inconsistent indenting Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Accumulate ring statistics over resetBenjamin Mikailenko1-8/+225
Resets may occur with or without user interaction. For example, a TX hang or reconfiguration of parameters will result in a reset. During reset, the VSI is freed, freeing any statistics structures inside as well. This would create an issue for the user where a reset happens in the background, statistics set to zero, and the user checks ring statistics expecting them to be populated. To ensure this doesn't happen, accumulate ring statistics over reset. Define a new ring statistics structure, ice_ring_stats. The new structure lives in the VSI's parent, preserving ring statistics when VSI is freed. 1. Define a new structure vsi_ring_stats in the PF scope 2. Allocate/free stats only during probe, unload, or change in ring size 3. Replace previous ring statistics functionality with new structure Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Accumulate HW and Netdev statistics over resetBenjamin Mikailenko1-0/+7
Resets happen with or without user interaction. For example, incidents such as TX hang or a reconfiguration of parameters will result in a reset. During reset, hardware and software statistics were set to zero. This created an issue for the user where a reset happens in the background, statistics set to zero, and the user checks statistics expecting them to be populated. To ensure this doesn't happen, keep accumulating stats over reset. 1. Remove function calls which reset hardware and netdev statistics. 2. Do not rollover statistics in ice_stat_update40 during reset. Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-23ice: Remove and replace ice speed defines with ethtool.h versionsBrett Creeley1-27/+5
The driver is currently using ICE_LINK_SPEED_* defines that mirror what ethtool.h defines, with one exception ICE_LINK_SPEED_UNKNOWN. This issue is fixed by the following changes: 1. replace ICE_LINK_SPEED_UNKNOWN with 0 because SPEED_UNKNOWN in ethtool.h is "-1" and that doesn't match the driver's expected behavior 2. transform ICE_LINK_SPEED_*MBPS to SPEED_* using static tables and fls()-1 to convert from BIT() to an index in a table. Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Brett Creeley <brett.creeley@intel.com> Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-09ice: Fix spurious interrupt during removal of trusted VFNorbert Zulinski1-0/+25
Previously, during removal of trusted VF when VF is down there was number of spurious interrupt equal to number of queues on VF. Add check if VF already has inactive queues. If VF is disabled and has inactive rx queues then do not disable rx queues. Add check in ice_vsi_stop_tx_ring if it's VF's vsi and if VF is disabled. Fixes: efe41860008e ("ice: Fix memory corruption in VF driver") Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-27ice: reorder PF/representor devlink port register/unregister flowsJiri Pirko1-3/+3
Make sure that netdevice is registered/unregistered while devlink port is registered. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-16/+26
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-08ice: Fix crash by keep old cfg when update TCs more than queuesDing Hui1-16/+26
There are problems if allocated queues less than Traffic Classes. Commit a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") already disallow setting less queues than TCs. Another case is if we first set less queues, and later update more TCs config due to LLDP, ice_vsi_cfg_tc() will failed but left dirty num_txq/rxq and tc_cfg in vsi, that will cause invalid pointer access. [ 95.968089] ice 0000:3b:00.1: More TCs defined than queues/rings allocated. [ 95.968092] ice 0000:3b:00.1: Trying to use more Rx queues (8), than were allocated (1)! [ 95.968093] ice 0000:3b:00.1: Failed to config TC for VSI index: 0 [ 95.969621] general protection fault: 0000 [#1] SMP NOPTI [ 95.969705] CPU: 1 PID: 58405 Comm: lldpad Kdump: loaded Tainted: G U W O --------- -t - 4.18.0 #1 [ 95.969867] Hardware name: O.E.M/BC11SPSCB10, BIOS 8.23 12/30/2021 [ 95.969992] RIP: 0010:devm_kmalloc+0xa/0x60 [ 95.970052] Code: 5c ff ff ff 31 c0 5b 5d 41 5c c3 b8 f4 ff ff ff eb f4 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 89 d1 <8b> 97 60 02 00 00 48 8d 7e 18 48 39 f7 72 3f 55 89 ce 53 48 8b 4c [ 95.970344] RSP: 0018:ffffc9003f553888 EFLAGS: 00010206 [ 95.970425] RAX: dead000000000200 RBX: ffffea003c425b00 RCX: 00000000006080c0 [ 95.970536] RDX: 00000000006080c0 RSI: 0000000000000200 RDI: dead000000000200 [ 95.970648] RBP: dead000000000200 R08: 00000000000463c0 R09: ffff888ffa900000 [ 95.970760] R10: 0000000000000000 R11: 0000000000000002 R12: ffff888ff6b40100 [ 95.970870] R13: ffff888ff6a55018 R14: 0000000000000000 R15: ffff888ff6a55460 [ 95.970981] FS: 00007f51b7d24700(0000) GS:ffff88903ee80000(0000) knlGS:0000000000000000 [ 95.971108] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 95.971197] CR2: 00007fac5410d710 CR3: 0000000f2c1de002 CR4: 00000000007606e0 [ 95.971309] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 95.971419] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 95.971530] PKRU: 55555554 [ 95.971573] Call Trace: [ 95.971622] ice_setup_rx_ring+0x39/0x110 [ice] [ 95.971695] ice_vsi_setup_rx_rings+0x54/0x90 [ice] [ 95.971774] ice_vsi_open+0x25/0x120 [ice] [ 95.971843] ice_open_internal+0xb8/0x1f0 [ice] [ 95.971919] ice_ena_vsi+0x4f/0xd0 [ice] [ 95.971987] ice_dcb_ena_dis_vsi.constprop.5+0x29/0x90 [ice] [ 95.972082] ice_pf_dcb_cfg+0x29a/0x380 [ice] [ 95.972154] ice_dcbnl_setets+0x174/0x1b0 [ice] [ 95.972220] dcbnl_ieee_set+0x89/0x230 [ 95.972279] ? dcbnl_ieee_del+0x150/0x150 [ 95.972341] dcb_doit+0x124/0x1b0 [ 95.972392] rtnetlink_rcv_msg+0x243/0x2f0 [ 95.972457] ? dcb_doit+0x14d/0x1b0 [ 95.972510] ? __kmalloc_node_track_caller+0x1d3/0x280 [ 95.972591] ? rtnl_calcit.isra.31+0x100/0x100 [ 95.972661] netlink_rcv_skb+0xcf/0xf0 [ 95.972720] netlink_unicast+0x16d/0x220 [ 95.972781] netlink_sendmsg+0x2ba/0x3a0 [ 95.975891] sock_sendmsg+0x4c/0x50 [ 95.979032] ___sys_sendmsg+0x2e4/0x300 [ 95.982147] ? kmem_cache_alloc+0x13e/0x190 [ 95.985242] ? __wake_up_common_lock+0x79/0x90 [ 95.988338] ? __check_object_size+0xac/0x1b0 [ 95.991440] ? _copy_to_user+0x22/0x30 [ 95.994539] ? move_addr_to_user+0xbb/0xd0 [ 95.997619] ? __sys_sendmsg+0x53/0x80 [ 96.000664] __sys_sendmsg+0x53/0x80 [ 96.003747] do_syscall_64+0x5b/0x1d0 [ 96.006862] entry_SYSCALL_64_after_hwframe+0x65/0xca Only update num_txq/rxq when passed check, and restore tc_cfg if setup queue map failed. Fixes: a632b2a4c920 ("ice: ethtool: Prohibit improper channel config for DCB") Signed-off-by: Ding Hui <dinghui@sangfor.com.cn> Reviewed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22Merge branch '100GbE' of ↵Jakub Kicinski1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-18 (ice) This series contains updates to ice driver only. Jesse and Anatolii add support for controlling FCS/CRC stripping via ethtool. Anirudh allows for 100M speeds on devices which support it. Sylwester removes ucast_shared field and the associated dead code related to it. Mikael removes non-inclusive language from the driver. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: remove non-inclusive language ice: Remove ucast_shared ice: Allow 100M speeds for some devices ice: Implement FCS/CRC and VLAN stripping co-existence policy ice: Implement control of FCS/CRC stripping ==================== Link: https://lore.kernel.org/r/20220818155207.996297-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22ice: xsk: use Rx ring's XDP ring when picking NAPI contextMaciej Fijalkowski1-2/+2
Ice driver allocates per cpu XDP queues so that redirect path can safely use smp_processor_id() as an index to the array. At the same time though, XDP rings are used to pick NAPI context to call napi_schedule() or set NAPIF_STATE_MISSED. When user reduces queue count, say to 8, and num_possible_cpus() of underlying platform is 44, then this means queue vectors with correlated NAPI contexts will carry several XDP queues. This in turn can result in a broken behavior where NAPI context of interest will never be scheduled and AF_XDP socket will not process any traffic. To fix this, let us change the way how XDP rings are assigned to Rx rings and use this information later on when setting ice_tx_ring::xsk_pool pointer. For each Rx ring, grab the associated queue vector and walk through Tx ring's linked list. Once we stumble upon XDP ring in it, assign this ring to ice_rx_ring::xdp_ring. Previous [0] approach of fixing this issue was for txonly scenario because of the described grouping of XDP rings across queue vectors. So, relying on Rx ring meant that NAPI context could be scheduled with a queue vector without XDP ring with associated XSK pool. [0]: https://lore.kernel.org/netdev/20220707161128.54215-1-maciej.fijalkowski@intel.com/ Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+6
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18ice: Implement control of FCS/CRC strippingJesse Brandeburg1-0/+22
The driver can allow the user to configure whether the CRC aka the FCS (Frame Check Sequence) is DMA'd to the host as part of the receive buffer. The driver usually wants this feature disabled so that the hardware checks the FCS and strips it in order to save PCI bandwidth. Control the reception of FCS to the host using the command: ethtool -K eth0 rx-fcs <on|off> The default shown in ethtool -k eth0 | grep fcs; should be "off", as the hardware will drop any frame with a bad checksum, and DMA of the checksum is useless overhead especially for small packets. Testing Hints: test the FCS/CRC arrives with received packets using tcpdump -nnpi eth0 -xxxx and it should show crc data as the last 4 bytes of the packet. Can also use wireshark to turn on CRC checking and check the data is correct. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Co-developed-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Powered by cgit, Gruvboxed by Blaster4385.